Custom-tailored hole transport layer using oxalic acid for high-quality tin-lead perovskites and efficient all-perovskite tandems.

All-perovskite tandem solar cells (TSCs) have exhibited higher efficiencies than single-junction perovskite solar cells (PSCs) but still suffer from the unsatisfactory performance of low-bandgap (LBG) tin-lead (Sn-Pb) subcells. The inherent properties of PEDOT:PSS are crucial to high-performance Sn-Pb perovskite films and devices; however, the underlying mechanism has not been fully explored and revealed. Here, we report a facile oxalic acid treatment of PEDOT:PSS (OA-PEDOT:PSS) to precisely regulate its work function and surface morphology. OA-PEDOT:PSS shows a larger work function and an ordered reorientation and fiber-shaped film morphology with efficient hole transport pathways, leading to the formation of more ideal hole-selective contact with Sn-Pb perovskite for suppressing interfacial nonradiative recombination losses. Moreover, OA-PEDOT:PSS induces (100) preferred orientation growth of perovskite for higher-quality Sn-Pb films. Last, the OA-PEDOT:PSS-tailored LBG PSC yields an impressive efficiency of up to 22.56% (certified 21.88%), enabling 27.81% efficient all-perovskite TSC with enhanced operational stability.

Improved Carrier Management via a Multifunctional Modifier for High-Quality Low-Bandgap Sn-Pb Perovskites and Efficient All-Perovskite Tandem Solar Cells.

All-perovskite tandem solar cells (TSCs) hold great promise in terms of ultrahigh efficiency, low manufacturing cost, and flexibility, stepping forward to the next-generation photovoltaics. However, their further development is hampered by the relatively low performance of low-bandgap (LBG) tin (Sn)-lead (Pb) perovskite solar cells (PSCs). Improving the carrier management, including suppressing trap-assisted non-radiative recombination and promoting carrier transfer, is of great significance to enhance the performance of Sn-Pb PSCs. Herein, a carrier management strategy is reported for using cysteine hydrochloride (CysHCl) simultaneously as a bulky passivator and a surface anchoring agent for Sn-Pb perovskite. CysHCl processing effectively reduces trap density and suppresses non-radiative recombination, enabling the growth of high-quality Sn-Pb perovskite with greatly improved carrier diffusion length of >8 µm. Furthermore, the electron transfer at the perovskite/C60 interface is accelerated due to the formation of surface dipoles and favorable energy band bending. As a result, these advances enable the demonstration of champion efficiency of 22.15% for CysHCl-processed LBG Sn-Pb PSCs with remarkable enhancement in both open-circuit voltage and fill factor. When paired with a wide-bandgap (WBG) perovskite subcell, a certified 25.7%-efficient all-perovskite monolithic tandem device is further demonstrated.

Improving interface quality for 1-cm2 all-perovskite tandem solar cells.

All-perovskite tandem solar cells provide high power conversion efficiency at a low cost1-4. Rapid efficiency improvement in small-area (<0.1 cm2) tandem solar cells has been primarily driven by advances in low-bandgap (approximately 1.25 eV) perovskite bottom subcells5-7. However, unsolved issues remain for wide-bandgap (> 1.75 eV) perovskite top subcells8, which at present have large voltage and fill factor losses, particularly for large-area (>1 cm2) tandem solar cells. Here we develop a self-assembled monolayer of (4-(7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid as a hole-selective layer for wide-bandgap perovskite solar cells, which facilitates subsequent growth of high-quality wide-bandgap perovskite over a large area with suppressed interfacial non-radiative recombination, enabling efficient hole extraction. By integrating (4-(7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid in devices, we demonstrate a high open-circuit voltage (VOC) of 1.31 V in a 1.77-eV perovskite solar cell, corresponding to a very low VOC deficit of 0.46 V (with respect to the bandgap). With these wide-bandgap perovskite subcells, we report 27.0% (26.4% certified stabilized) monolithic all-perovskite tandem solar cells with an aperture area of 1.044 cm2. The certified tandem cell shows an outstanding combination of a high VOC of 2.12 V and a fill factor of 82.6%. Our demonstration of the large-area tandem solar cells with high certified efficiency is a key step towards scaling up all-perovskite tandem photovoltaic technology.

Substitution of Ethylammonium Halides Enabling Lead-Free Tin-Based Perovskite Solar Cells with Enhanced Efficiency and Stability.

Tin (Sn)-based perovskite solar cells (PSCs) have attracted extensive attention due to the irlow toxicity and excellent optoelectric properties. Nonetheless, the development of Sn-based PSCs is still hampered by poor film quality due to the fast crystallization and the oxidation from Sn2+ to Sn4+. In this work, we compare and employ three ethylammonium halides, EAX (X = Cl, Br, I) to explore their roles in Sn-based perovskites and solar cells. We find that crystallinity and crystallization orientation of perovskites are optimized with the regulation of EAI. EABr leads to reduced defect density and enhanced crystallinity but also the lowest absorption and the widest band gap owing to the substitution of Br-. Notably, perovskites with EACl exhibit the best crystallinity, lowest defect density, and excellent antioxidant capacity benefiting from the partial substitution of Cl-. Consequently, the EACl-modified device achieves a champion PCE of 12.50% with an improved Voc of 0.79 V. Meanwhile, an unencapsulated EACl device shows excellent shelf stability with negligible efficiency degradation after 5400 h of storage in a N2-filled glovebox, and the encapsulated device retains its initial efficiency after continuous light illumination at the maximum power point for 100 h in air.

Pure 2D Perovskite Formation by Interfacial Engineering Yields a High Open-Circuit Voltage beyond 1.28 V for 1.77-eV Wide-Bandgap Perovskite Solar Cells.

Surface post-treatment using ammonium halides effectively reduces large open-circuit voltage (VOC ) losses in bromine-rich wide-bandgap (WBG) perovskite solar cells (PSCs). However, the underlying mechanism still remains unclear and the device efficiency lags largely behind. Here, a facile strategy of precisely tailoring the phase purity of 2D perovskites on top of 3D WBG perovskite and realizing high device efficiency is reported. The transient absorption spectra, cross-sectional confocal photoluminescence mapping, and cross-sectional Kelvin probe force microscopy are combined to demonstrate optimal defect passivation effect and surface electric-field of pure n = 1 2D perovskites formed atop 3D WBG perovskites via low-temperature annealing. As a result, the inverted champion device with 1.77-eV perovskite absorber achieves a high VOC of 1.284 V and a power conversion efficiency (PCE) of 17.72%, delivering the smallest VOC deficit of 0.486 V among WBG PSCs with a bandgap higher than 1.75 eV. This enables one to achieve a four-terminal all-perovskite tandem solar cell with a PCE exceeding 25% by combining with a 1.25-eV low-bandgap PSC.

Tofu intake is inversely associated with risk of breast cancer: A meta-analysis of observational studies.

Observational studies on the association between tofu intake and breast cancer incidence have reported inconsistent results. We reviewed the current evidence and quantitatively assessed this association by conducting a dose-response meta-analysis. The electronic databases PubMed and EMBASE were searched for relevant studies published up to August, 2018. We included epidemiological studies that reported relative risks (RRs) or odds ratios (ORs) with 95% confidence intervals (CIs) for the association between tofu intake and breast cancer risk. A total of 14 studies (2 cohort studies, 12 case-control studies) were included in the meta-analysis. The overall OR of breast cancer for highest vs lowest intake of tofu was 0.78 (95% CI 0.69-0.88), with moderate heterogeneity (P = 0.011, I2 = 49.7%). Dose-response analysis based on 5 case-control studies revealed that each 10 g/d increase in tofu intake was associated with 10% reduction in the risk of breast cancer (95% CI 7%-13%, P = 0.037, I2 = 40.8%). In summary, our findings suggest an inverse dose-response association between tofu intake and risk of breast cancer. However, owing to the limitations of case-control studies, more properly designed prospective studies are warranted to confirm this association.

The status and characteristics of urinary stone composition in China.

OBJECTIVES: To explore characteristics of urinary stone composition in China, and determine the effects of gender, age, body mass index (BMI), stone location, and geographical region on stone composition. PATIENTS AND METHODS: We prospectively used Fourier-transform infrared spectroscopy to analyse stones from consecutive patients presenting with new-onset urolithiasis at 46 hospitals in seven geographical areas of China, between 1 June 2010 and 31 May 2015. Chi-squared tests and logistic regression analyses were used to determine associations between stone composition and gender, age, BMI, stone location, and geographical region. RESULTS: The most common stone constituents were: calcium oxalate (CaOx; 65.9%), carbapatite (15.6%), urate (12.4%), struvite (2.7%), and brushite (1.7%). CaOx and urate stones occurred more frequently in males, whereas carbapatite and struvite were more common in females (P < 0.01). CaOx and carbapatite were more common in those aged 30-50 and 20-40 years than in other groups. Brushite and struvite were most common amongst those aged <20 and >70 years. The detection rate of urate increased with age, whilst cystine decreased with age. Obese patients were more likely to have urate stones than carbapatite or brushite stones (P < 0.01). CaOx, carbapatite, brushite, and cystine stones were more frequently found in the kidney than other types, whereas urate and struvite were more frequent in the bladder (P < 0.01). Stone composition varied by geographical region. CONCLUSIONS: The most common stone composition was CaOx, followed by carbapatite, urate, struvite, and brushite. Stone composition differed significantly in patients grouped by gender, age, BMI, stone location, and geographical region.

Controlling CH3NH3PbI(3-x)Cl(x) Film Morphology with Two-Step Annealing Method for Efficient Hybrid Perovskite Solar Cells.

The methylammonium lead halide perovskite solar cells have become very attractive because they can be prepared with low-cost solution-processable technology and their power conversion efficiency have been increasing from 3.9% to 20% in recent years. However, the high performance of perovskite photovoltaic devices are dependent on the complicated process to prepare compact perovskite films with large grain size. Herein, a new method is developed to achieve excellent CH3NH3PbI3-xClx film with fine morphology and crystallization based on one step deposition and two-step annealing process. This method include the spin coating deposition of the perovskite films with the precursor solution of PbI2, PbCl2, and CH3NH3I at the molar ratio 1:1:4 in dimethylformamide (DMF) and the post two-step annealing (TSA). The first annealing is achieved by solvent-induced process in DMF to promote migration and interdiffusion of the solvent-assisted precursor ions and molecules and realize large size grain growth. The second annealing is conducted by thermal-induced process to further improve morphology and crystallization of films. The compact perovskite films are successfully prepared with grain size up to 1.1 µm according to SEM observation. The PL decay lifetime, and the optic energy gap for the film with two-step annealing are 460 ns and 1.575 eV, respectively, while they are 307 and 327 ns and 1.577 and 1.582 eV for the films annealed in one-step thermal and one-step solvent process. On the basis of the TSA process, the photovoltaic devices exhibit the best efficiency of 14% under AM 1.5G irradiation (100 mW·cm(-2)).