Dual electrochemical signal "signal-on-off" sensor based on CHA-Td-HCR and CRISPR-Cas12a for MUC1 detection.

Mucin 1 (MUC1) is frequently overexpressed in various cancers and is essential for early cancer detection. Current methods to detect MUC1 are expensive, time-consuming, and require skilled personnel. Therefore, developing a simple, sensitive, highly selective MUC1 detection sensor is necessary. In this study, we proposed a novel "signal-on-off" strategy that, in the presence of MUC1, synergistically integrates catalytic hairpin assembly (CHA) with DNA tetrahedron (Td)-based nonlinear hybridization chain reaction (HCR) to enhance the immobilization of electrochemically active methylene blue (MB) on magnetic nanoparticles (MNP), marking the MB signal "on". Concurrently, the activation of CRISPR-Cas12a by isothermal amplification products triggers the cleavage of single-stranded DNA (ssDNA) at the electrode surface, resulting in a reduction of MgAl-LDH@Fc-AuFe-MIL-101 (containing ferrocene, Fc) on the electrode, presenting the "signal-off" state. Both MB and MgAl-LDH@Fc-AuFe-MIL-101 electrochemical signals were measured and analyzed. Assay parameters were optimized, and sensitivity, stability, and linear range were assessed. Across a concentration spectrum of MUC1 spanning from 10 fg/mL to 100 ng/mL, the MB and MgAl-LDH@Fc-AuFe-MIL-101 signals were calibrated with each other, demonstrating a "signal-on-off" dual electrochemical signaling pattern. This allows for the precise and quantitative detection of MUC1 in clinical samples, offering significant potential for medical diagnosis.

Electrochemical detection of myoglobin using an ultrasensitive label-free sensor derived from cubic-ZIF67@Au-rGOF-NH2 composite of MOF and GOF.

Markers of myocardial injury, such as myoglobin (Mb), are substances swiftly released into the peripheral bloodstream upon myocardial cell injury or altered cardiac activity. During the onset of acute myocardial infarction, patients experience a significant surge in serum Mb levels. Given this, precise detection of Mb is essential, necessitating the development of innovative assays to optimize detection capabilities. This study introduces the synthesis of a three-dimensional hierarchical nanocomposite, Cubic-ZIF67@Au-rGOF-NH2, utilizing aminated reduced graphene oxide and zeolite imidazolium ester framework-67 (ZIF67) as foundational structures. Notably, this novel material, applied in a label-free electrochemical immunosensor, presents a groundbreaking approach for detecting myocardial injury markers. Experimental outcomes revealed ZIF67 and AuNPs exhibit enhanced affinity and growth on the 3D-rGOF-NH2 matrix, thus amplifying electrical conductivity while preserving the inherent electrochemical attributes of ZIF67. As a result, the Cubic-ZIF67@Au-rGOF-NH2 label-free electrochemical immunosensor exhibited a broad detection range and high sensitivity for Mb. The derived standard curve was ΔIp = 16.67552lgC+275.245 (R = 0.993) with a detection threshold of 3.47 fg/ml. Moreover, recoveries of standards spiked into samples ranged between 96.3% and 108.7%. Importantly, the devised immunosensor retained notable selectivity against non-target proteins, proving its potential clinical utility based on exemplary sample analysis performance.

Advances in the pharmacological effects and mechanisms of Nelumbo nucifera gaertn. Extract nuciferine.

ETHNOPHARMACOLOGIC RELEVANCE: The leaves of Nelumbo nucifera Gaertn. Are recorded in the earliest written documentation of traditional Chinese medicinal as "Ben Cao Gang Mu", a medicinal herb for blood clotting, dysentery and dizziness. Nuciferine, one of N. nucifera Gaertn. leaf extracts, has been shown to possess several pharmacological properties, including but not limited to ameliorating hyperlipidemia, stimulating insulin secretion, inducing vasodilation, reducing blood pressure, and demonstrating anti-arrhythmic properties. AIM OF THE STUDY: In light of the latest research findings on nuciferine, this article provides a comprehensive overview of its chemical properties, pharmacological activities, and the underlying regulatory mechanisms. It aims to serve as a dependable reference for further investigations into the pharmacological effects and mechanisms of nuciferine. MATERIALS AND METHODS: Use Google Scholar, Scifinder, PubMed, Springer, Elsevier, Wiley, Web of Science and other online database search to collect the literature on extraction, separation, structural analysis and pharmacological activity of nuciferine published before November 2023. The key words are "extraction", "isolation", "purification" and "pharmacological action" and "nuciferine". RESULTS: Nuciferine has been widely used in the treatment of ameliorating hyperlipidemia and lose weight, Nuciferine is a monomeric aporphine alkaloid extracted from the leaves of the plant Nymphaea caerulea and Nelumbo nucifera Gaertn. Nuciferine has pharmacological activities such as relaxing smooth muscles, improving hyperlipidemia, stimulating insulin secretion, vasodilation, inducing hypotension, antiarrhythmic effects, and antimicrobial and anti-HIV activities. These pharmacological properties lay a foundation for the treatment of tumors, inflammation, hyperglycemia, lipid-lowering and weight-loss, oxidative stress and other diseases with nuciferine. CONCLUSION: Nuciferine has been clinically used to treat hyperlipidemia and aid in weight loss due to its effects on lipid levels, insulin secretion, vasodilation, blood pressure reduction, anti-tumor properties, and immune enhancement. However, other potential benefits of nuciferine have not yet been fully explored in clinical practice. Future research should delve deeper into its molecular structure, toxicity, side effects, and clinical pharmacology to uncover its full range of effects and pave the way for its safe and expanded clinical use.

Ultrasensitive and label-free electrochemical immunosensor for the detection of the ovarian cancer biomarker CA125 based on CuCo-ONSs@AuNPs nanocomposites.

Cancer antigen 125 (CA125) is pivotal as a tumor marker in early ovarian cancer prevention and diagnosis. In this work, we introduced an ultrasensitive label-free electrochemical immunosensor tailored for CA125 detection, leveraging nanogold-functionalized copper-cobalt oxide nanosheets (CuCo-ONSs@AuNPs) as nanocomposites. For the inaugural application, copper-cobalt oxide nanosheets delivered the requisite DPV electrochemical response for the immunosensors. Their large specific surface area and commendable electrical conductivity amplify electron transfer and enable significant gold nanoparticle loading. Concurrently, AuNPs offer a plethora of active sites, facilitating easy immobilization of biomolecules via the bond between amino groups and AuNPs. We employed scanning electron microscopy, transmission electron microscopy, and x-ray photoelectron spectroscopy to characterize the nanomaterials' surface morphology and elemental composition. The electrochemical sensor response signals were ascertained using differential pulse voltammetry. Under optimal conditions, the immunosensor exhibited a linear detection range from 1×10-7 U/mL to 1×10-3 U/mL and a detection limit of 3.9×10-8 U/mL (S/N=3). The proposed label-free electrochemical immunosensor furnishes a straightforward, dependable, and sensitive approach for CA125 quantification and stands as a promising method for clinical detection of other tumor markers.

Ratiometric electrochemical immunosensor for the detection of CA199 based on the ratios of NiCo@Fc-MWCNTs-LDH and 3D-rGOF@Ag/Au complexes.

Carbohydrate antigen 199 (CA199) is the most sensitive marker reported for pancreatic cancer, and it is a difficult task to develop a highly sensitive assay for CA199. During the experiment, a ratiometric electrochemical immunosensor for quantitative analysis of CA199 was prepared for NiCo@Fc-MWCNTs-LDH as the electrode sensing surface and 3D-rGOF@Ag/Au as the label of Ab2. NiCo@Fc-MWCNTs-LDH not only provide the required signal for the immunosensor, but also have a layered structure to obtain a large specific surface area, which can provide more sites for the placement of biological molecules. rGOF has the advantages of large specific surface area and high porosity, which can adsorb Ag electrochemical probe through redox reaction. The modification of gold nanoparticles can not only enhance the electrical conductivity of nano-composites, but also immobilize more biomolecules to improve the sensitivity of electrochemical sensors. With the beefing up of CA199 concentration, the oxidation peak current of Ag increases and the oxidation peak current of Fc-COOH decreases. The ratio (y = IAg/IFc-COOH) of two different signals was linear with the logarithm of CA199 concentration in a certain value range. Under optimal conditions, the immunosensor showed excellent performance in the concentration range of 0.0001 U/mL to 10 U/mL, and the detection limit was 5.55 × 10-4 U/mL. The strategy could clearly discriminate between matched and mismatched targets, demonstrating high specifificity. This approach further detects CA199 in human plasma to differentiate pancreatic cancer patients from healthy individuals with high accuracy. This method also provided a new idea for the ultrasensitive quantitative detection of other biomarkers.

Sandwich-type immunosensor based on aminated 3D-rGOF-NH2 and CMK-3-Fc-MgAl-LDH multilayer nanocomposites for detection of CA125.

Cancer antigen 125 (CA125)1 is the most important biological screening indicator used to monitor epithelial ovarian cancers, and it plays a vital role in distinguishing ovarian cancers from benign diseases. Biosensors show great potential in the analysis and detection of disease markers. In this study, we designed electrochemical sensors based on three-dimensional amino-functionalized reduced graphene oxide (3D-rGOF-NH2),2 MgAl layered double hydroxide nanocomposites containing ordered mesoporous carbon (CMK-3),3 and ferrocene carboxylic acids（Fc-COOH）4for the detection of CA125. 3D-rGOF-NH2 possesses good conductivity, a large surface area, and high porosity, enabling more immobilized nanoparticles to be deposited on its surface with excellent stability. CMK-3@Fc@MgAl-LDH nanocomposite was used as a carrier to enhance the immobilization of antibodies and the loading of Fc, conductors to enhance conductivity, and enhancers to gradually amplify the signal of Fc. The surface morphology, elemental composition, and surface groups of the materials were characterized using scanning electron microscopy (SEM),5 transmission electron microscopy (TEM),6 and X-ray diffraction (XRD)7 techniques. The response signal of the electrochemical sensor was measured by DPV. Under the optimal conditions, the electrochemical sensor obtained a linear detection range of 0.01 U/mL-100 U/mL with a detection limit of 0.00417 U/mL.

Electrochemical Detection of Nuciferine in the Lotus Leaf Based on Efficient Catalysis by Zirconium-MOFs.

BACKGROUND: Nuciferine is an amorphine alkaloid in lotus leaf that has anti-inflammatory, lipid-lowering and hypoglycemic effects, so the quantitation of detected nuciferine is important. OBJECTIVE: An electrochemical method was developed for nuciferine detection based on efficient catalysis by Zr-MOFs (Metal-organic frameworks). METHODS: In this work, the ratiometric electrochemical method was developed for nuciferine detection based on efficient catalysis by Zr-MOFs. UiO66 is a Zr-MOFs nanomaterial and can absorb methylene blue (MB) by electrostatic action to form UiO66-MB nanocomposite. The UiO66-MB nanocomposite can be used as an enhancer to catalyze nuciferine decomposition and a carrier to provide a two-dimensional environment for the reaction of nuciferine. Moreover, good catalytic properties of UiO66 were first time used for the detection of nuciferine. RESULTS: This method has a linear detection range from 0.1 to approximately 20 µg/mL, and a low detection limit of 0.03 µg/mL (S/N=3). The recovery was from 98.1 to 102% and the RSD was from 0.45 to 3.65%, indicating that the proposed method can be applied for the analysis of real samples. CONCLUSION: The proposed electrochemical method can be used to detect nuciferine in lotus leaves. HIGHLIGHTS: The ratiometric electrochemical method was used for the detection of nuciferine. The MB can be used as an internal standard for anti-interference. And, UiO66 is used to catalyze the decomposition of nuciferine. Great catalytic properties of UiO66 were first time used for the detection of nuciferine.

A label-free electrochemical immunosensor for CA125 detection based on CMK-3(Au/Fc@MgAl-LDH)n multilayer nanocomposites modification.

A label-free electrochemical immunosensor was constructed for cancer antigen 125 (CA125) detection based on multiple-enlargement means of layer-by-layer (LBL) assembly of ordered mesoporous carbon (CMK-3), gold nanoparticles (Au NPs) and MgAl layered double hydroxides containing ferrocenecarboxylic acid (Fc@MgAl-LDH). A CMK-3(Au/Fc@MgAl-LDH)n multilaminate nanocomposites was designed using technology of LBL self-assembly among negatively charged Au NPs, positively charged CMK-3 and Fc@MgAl-LDH nanosheets. The CMK-3(Au/Fc@MgAl-LDH)n multilaminate nanocomposites was used as carriers to increase the immobilization of antibody and the number of loading Fc, conductors to strengthen conductivity and enhancers to amplify signal of Fc step-by-step. Besides, this special and excellent way of LBL assembly can immensely amplify the signal of immunosensor and more immobilize the biomolecules, and label-free method is a more simple the measuring way and the procedure. The immunosensor displayed a wider linear range of 0.01 U ml-1-1000 U ml-1 and a lower detection limit of 0.004 U ml-1. Therefore, the sensor can stablely and accurately be applied for CA125 detection in clinical cancer diagnosis.