ABSTRACT
Surface roughness ubiquitously prevails in natural faults across various length scales. Despite extensive studies highlighting the important role of fault geometry in the dynamics of tectonic earthquakes, whether and how fault roughness affects fluid-induced seismicity remains elusive. Here, we investigate the effects of fault geometry and stress heterogeneity on fluid-induced fault slip and associated seismicity characteristics using laboratory experiments and numerical modeling. We perform fluid injection experiments on quartz-rich sandstone samples containing either a smooth or a rough fault. We find that geometrical roughness slows down injection-induced fault slip and reduces macroscopic slip velocities and fault slip-weakening rates. Stress heterogeneity and roughness control hypocenter distribution, frequency-magnitude characteristics, and source mechanisms of injection-induced acoustic emissions (AEs) (analogous to natural seismicity). In contrast to smooth faults where injection-induced AEs are uniformly distributed, slip on rough faults produces spatially localized AEs with pronounced non-double-couple source mechanisms. We demonstrate that these clustered AEs occur around highly stressed asperities where induced local slip rates are higher, accompanied by lower Gutenberg-Richter b-values. Our findings suggest that real-time monitoring of induced microseismicity during fluid injection may allow identifying progressive localization of seismic activity and improve forecasting of runaway events.
ABSTRACT
Serpentinization and carbonation of mantle rocks (peridotite alteration) are fundamentally important processes for a spectrum of geoscience topics, including arc volcanism, earthquake processes, chemosynthetic biological communities, and carbon sequestration. Data from a hydrophone array deployed in the Multi-Borehole Observatory (MBO) of the Oman Drilling Project demonstrates that free gas generated by peridotite alteration and/or microbial activity migrates through the formation in discrete bursts of activity. We detected several, minutes-long, swarms of gas discharge into Hole BA1B of the MBO over the course of a 9 month observation interval. The episodic nature of the migration events indicates that free gas accumulates in the permeable flow network, is pressurized, and discharges rapidly into the borehole when a critical pressure, likely associated with a capillary barrier at a flow constriction, is reached. Our observations reveal a dynamic mode of fluid migration during serpentinization, and highlight the important role that free gas can play in modulating pore pressure, fluid flow, and alteration kinetics during peridotite weathering.
ABSTRACT
We present a minimal one-dimensional continuum model for the transition from cracklike to pulselike propagation of frictional rupture. In its nondimensional form, the model depends on only two free parameters: the nondimensional prestress and an elasticity ratio that accounts for the finite height of the system. The model predicts stable slip pulse solutions for slip boundary conditions, and unstable slip pulse solutions for stress boundary conditions. The results demonstrate that a mechanism based solely on elastic relaxation and redistribution of initial prestress can cause pulselike rupture, without any particular rate or slip dependences of dynamic friction. This means that pulselike propagation along frictional interfaces is likely a generic feature that can occur in systems of finite thickness over a wide range of friction constitutive laws.
ABSTRACT
Depleted oil reservoirs are considered a viable solution to the global challenge of CO2 storage. A key concern is whether the wells can be suitably sealed with cement to hinder the escape of CO2. Under reservoir conditions, CO2 is in its supercritical state, and the high pressures and temperatures involved make real-time microscopic observations of cement degradation experimentally challenging. Here, we present an in situ 3D dynamic X-ray micro computed tomography (µ-CT) study of well cement carbonation at realistic reservoir stress, pore-pressure, and temperature conditions. The high-resolution time-lapse 3D images allow monitoring the progress of reaction fronts in Portland cement, including density changes, sample deformation, and mineral precipitation and dissolution. By switching between flow and nonflow conditions of CO2-saturated water through cement, we were able to delineate regimes dominated by calcium carbonate precipitation and dissolution. For the first time, we demonstrate experimentally the impact of the flow history on CO2 leakage risk for cement plugging. In-situ µ-CT experiments combined with geochemical modeling provide unique insight into the interactions between CO2 and cement, potentially helping in assessing the risks of CO2 storage in geological reservoirs.
Subject(s)
Carbon Dioxide , Carbonates , Construction Materials , Water , X-Ray MicrotomographyABSTRACT
In nature and experiments, a large variety of rupture speeds and front modes along frictional interfaces are observed. Here, we introduce a minimal model for the rupture of homogeneously loaded interfaces with velocity strengthening dynamic friction, containing only two dimensionless parameters; τ[over ¯], which governs the prestress, and α[over ¯], which is set by the interfacial viscosity. This model contains a large variety of front types, including slow fronts, sub-Rayleigh fronts, supershear fronts, slip pulses, cracks, arresting fronts, and fronts that alternate between arresting and propagating phases. Our results indicate that this wide range of front types is an inherent property of frictional systems with velocity strengthening branches.
ABSTRACT
Earthquakes in the continental crust commonly occur in the upper 15 to 20 km. Recent studies demonstrate that earthquakes also occur in the lower crust of collision zones and play a key role in metamorphic processes that modify its physical properties. However, details of the failure process and sequence of events that lead to seismic slip in the lower crust remain uncertain. Here, we present observations of a fault zone from the Bergen Arcs, western Norway, which constrain the deformation processes of lower crustal earthquakes. We show that seismic slip and associated melting are preceded by fracturing, asymmetric fragmentation, and comminution of the wall rock caused by a dynamically propagating rupture. The succession of deformation processes reported here emphasize brittle failure mechanisms in a portion of the crust that until recently was assumed to be characterized by ductile deformation.
ABSTRACT
Understanding the approach to faulting in continental rocks is critical for identifying processes leading to fracturing in geomaterials and the preparation process of large earthquakes. In situ dynamic X-ray imaging and digital volume correlation analysis of a crystalline rock core, under a constant confining pressure of 25 MPa, are used to elucidate the initiation, growth, and coalescence of microfractures leading to macroscopic failure as the axial compressive stress is increased. Following an initial elastic deformation, microfractures develop in the solid, and with increasing differential stress, the damage pervades the rock volume. The creation of new microfractures is accompanied by propagation, opening, and closing of existing microfractures, leading to the emergence of damage indices that increase as powers of the differential stress when approaching failure. A strong spatial correlation is observed between microscale zones with large positive and negative volumetric strains, microscale zones with shears of opposite senses, and microscale zones with high volumetric and shear strains. These correlations are attributed to microfracture interactions mediated by the heterogeneous stress field. The rock fails macroscopically as the microfractures coalesce and form a geometrically complex 3D volume that spans the rock sample. At the onset of failure, more than 70% of the damage volume is connected in a large fracture cluster that evolves into a fault zone. In the context of crustal faulting dynamics, these results suggest that evolving rock damage around existing locked or future main faults influences the localization process that culminates in large brittle rupture events.
ABSTRACT
The structural and metamorphic evolution of the lower crust has direct effects on the lithospheric response to plate tectonic processes involved in orogeny, including subsidence of sedimentary basins, stability of deep mountain roots and extension of high-topography regions. Recent research shows that before orogeny most of the lower crust is dry, impermeable and mechanically strong 1 . During an orogenic event, the evolution of the lower crust is controlled by infiltration of fluids along localized shear or fracture zones. In the Bergen Arcs of Western Norway, shear zones initiate as faults generated by lower-crustal earthquakes. Seismic slip in the dry lower crust requires stresses at a level that can only be sustained over short timescales or local weakening mechanisms. However, normal earthquake activity in the seismogenic zone produces stress pulses that drive aftershocks in the lower crust 2 . Here we show that the volume of lower crust affected by such aftershocks is substantial and that fluid-driven associated metamorphic and structural transformations of the lower crust follow these earthquakes. This provides a 'top-down' effect on crustal geodynamics and connects processes operating at very different timescales.
ABSTRACT
Antimony, which has damaging effects on the human body and the ecosystem, can be released into soils, ground-, and surface waters either from ore minerals that weather in near surface environments, or due to anthropogenic releases from waste rich in antimony, a component used in batteries, electronics, ammunitions, plastics, and many other industrial applications. Here, we show that dissolved Sb can interact with calcite, a widespread carbonate mineral, through a coupled dissolution-precipitation mechanism. The process is imaged in situ, at room temperature, at the nanometer scale by using an atomic force microscope equipped with a flow-through cell. Time-resolved imaging allowed following the coupled process of calcite dissolution, nucleation of precipitates at the calcite surface and growth of these precipitates. Sb(V) forms a precipitate, whereas Sb(III) needs to be oxidized to Sb(V) before being incorporated in the new phase. Scanning-electron microscopy and Raman spectroscopy allowed identification of the precipitates as two different calcium-antimony phases (Ca2Sb2O7). This coupled dissolution-precipitation process that occurs in a boundary layer at the calcite surface can sequester Sb as a solid phase on calcite, which has environmental implications as it may reduce the mobility of this hazardous compound in soils and groundwaters.
Subject(s)
Antimony , Calcium Carbonate , Ecosystem , Humans , Minerals , SoilABSTRACT
A solvable, minimal model of diffusion in the presence of a reversible adsorption site is investigated. We show that the diffusive particles are influenced by the adsorbing site on transient times when they have anomalous subdiffusive behavior. However, the particle dispersion law crosses over to the normal diffusive regime on asymptotically long times. The subdiffusive regime is characterized by a t^{1/4} transient scaling with the same exponent as for the irreversible adsorption. On this transient time scale dominated by particle adsorption, there is a depletion of particles near the adsorbing site, and the typical width of the depletion zone grows in time as t^{1/4} with the same exponent as the subdiffusive dispersion. We show that having a nonzero desorption probability for the adsorbed particles produces a crossover towards normal diffusion on time scales larger than a characteristic reactive time, which we show scales with diffusivity and the adsorption site reactivity.
ABSTRACT
A hard X-ray transparent triaxial deformation apparatus, called HADES, has been developed by Sanchez Technologies and installed on the microtomography beamline ID19 at the European Radiation Synchrotron Facility (ESRF). This rig can be used for time-lapse microtomography studies of the deformation of porous solids (rocks, ceramics, metallic foams) at conditions of confining pressure to 100â MPa, axial stress to 200â MPa, temperature to 250°C, and controlled aqueous fluid flow. It is transparent to high-energy X-rays above 60â keV and can be used for in situ studies of coupled processes that involve deformation and chemical reactions. The rig can be installed at synchrotron radiation sources able to deliver a high-flux polychromatic beam in the hard X-ray range to acquire tomographic data sets with a voxel size in the range 0.7-6.5â µm in less than two minutes.
ABSTRACT
A simple and reproducible analog experiment was used to simulate fracture formation in a low-permeability elastic solid during internal fluid/gas production, with the objective of developing a better understanding of the mechanisms that control the dynamics of fracturing, fracture opening and closing, and fluid transport. In the experiment, nucleation, propagation, and coalescence of fractures within an elastic gelatin matrix, confined in a Hele-Shaw cell, occurred due to CO_{2} production via fermentation of sugar, and it was monitored by optical means. We first quantified how a fracture network develops, and then how intermittent fluid transport is controlled by the dynamics of opening and closing of fractures. The gas escape dynamics exhibited three characteristic behaviors: (1) Quasiperiodic release of gas with a characteristic frequency that depends on the gas production rate but not on the system size. (2) A 1/f power spectrum for the fluctuations in the total open fracture area over an intermediate range of frequencies (f), which we attribute to collective effects caused by interaction between fractures in the drainage network. (3) A 1/f^{2} power spectrum was observed at high frequencies, which can be explained by the characteristic behavior of single fractures.
ABSTRACT
Calcite, a widespread natural mineral at the Earth's surface, is well-known for its capacity to sequester various elements within its structure. Among these elements, selenium is important because of its high toxicity in natural systems and for human health. In the form of selenite (Se((IV))), selenium can be incorporated into calcite during growth. Our in situ atomic force microscopy observations of calcite surfaces during contact with selenium-bearing solutions demonstrate that another process of selenium trapping can occur under conditions in which calcite dissolves. Upon the injection of solutions containing selenium in two states of oxidation (either Se((IV)) or Se((VI))), precipitates were observed forming while calcite was still dissolving. In the presence of selenate (Se((VI))), the precipitates formed remained small during the observation period. When injecting selenite (Se((IV))), the precipitates grew significantly and were identified as CaSeO3·H2O, based on SEM observations, Raman spectroscopy, and thermodynamic calculations. An interpretation is proposed where the dissolution of calcite increases the calcium concentration in a thin boundary layer in contact with the surface, allowing the precipitation of a selenium phase. This process of dissolution-precipitation provides a new mechanism for selenium sequestration and extends the range of thermodynamic conditions under which such a process is efficient.
Subject(s)
Calcium Carbonate/chemistry , Selenium/chemistry , Environmental Restoration and Remediation , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Oxidation-Reduction , Spectrum Analysis, Raman , ThermodynamicsABSTRACT
The possible intrusion of CO2 into a given freshwater aquifer due to leakage from deep geological storage involves a decrease in pH, which has been directly associated with the remobilization of hazardous trace elements via mineral dissolution and/or via desorption processes. In an effort to evaluate the potential risks to potable water quality, the present study is devoted to experimental investigation of the effects of CO2 intrusion on the mobility of toxic ions in simplified equilibrated aquifers. We demonstrate that remobilization of trace elements by CO2 intrusion is not a universal physicochemical effect. In fact goethite and calcite, two minerals frequently found in aquifers, could successfully prevent the remobilization of adsorbed Cu(II), Cd(II), Se(IV), and As(V) if CO2 is intruded into a drinking water aquifer. Furthermore, a decrease in pH resulting from CO2 intrusion could reactivate the adsorption of Se(IV) and As(V) if goethite and calcite are sufficiently available in underground layers. Our results also suggest that adsorption of cadmium and copper could be promoted by calcite dissolution. These adsorbed ions on calcite are not remobilized when CO2 is intruded into the system, but it intensifies calcite dissolution. On the other hand, arsenite As(III) is significantly adsorbed on goethite, but is partially remobilized by CO2 intrusion.
Subject(s)
Carbon Dioxide/analysis , Fresh Water/chemistry , Groundwater/chemistry , Arsenites/analysis , Cadmium/analysis , Copper/analysisABSTRACT
Two dilatometers with high precision and stability have been developed for measurement of indentation by pressure solution creep. The indentation of gold wires or glass cylinders into sodium chloride has been measured with down to 10 A accuracy and 6% precision. The indentation curves show a strong history dependence and the indentation rate decreases by three orders of magnitude over 400 h. The indentation mechanism is shown to be a pressure solution creep process in which material is dissolved at the indentor-sodium chloride contacts and transported to the free surface, where it precipitates in the proximity of the indentors. The indentation rates are not controlled by precipitation rates, the density of preexisting dislocations in the material, by change in the contact widths, or by ordinary plastic deformation. Small amplitude sinusoidal variations of temperature and normal stress are shown to have a large effect on the indentation rate. Moreover, sudden increase in normal stress from the indentor on the sodium chloride is shown to initiate an increased, time-dependent indentation rate. A model for pressure solution creep with time-dependent contact sizes explains the history dependence of the indentation data presented.
ABSTRACT
We present experimental evidence that pressure solution creep does not establish a steady-state interface microstructure as previously thought. Conversely, pressure solution controlled strain and the characteristic length scale of interface microstructures grow as the cubic root of time. Transient creep with the same scaling is known in metallurgy (Andrade creep). The apparent universal scaling of pressure solution transient creep is explained using an analogy with spinodal dewetting.