Factors Influencing Patient Decision-Making in the Treatment of Muscle-Invasive Bladder Cancer.

BACKGROUND: In 2023, an estimated 82,290 individuals were diagnosed with bladder cancer in the United States. For muscle-invasive bladder cancer (MIBC), the American Urological Association recommends offering radical cystectomy with cisplatin-based neoadjuvant chemotherapy. However, patients are increasingly requesting alternative treatments. OBJECTIVE: To describe factors influencing selection of radical cystectomy with cisplatin-based neoadjuvant chemotherapy (NAC + RC), radical cystectomy monotherapy (RC), or tri-modality therapy (TMT) among patients with MIBC. METHODS: Individual, semi-structured phone interviews were conducted with 18 adults who underwent MIBC treatment at the University of North Carolina, recruiting six patients each from three treatment groups: 1) NAC + RC, 2) RC, and 3) TMT. Interview transcriptions were qualitatively analyzed using QSR NVivo, with major themes and sub-themes extracted. Patients also completed the Shared Decision-Making Questionnaire (SDM-Q-9; range 0-100). RESULTS: Concern for survival and risks, quality of life, and varied patient preferences for involvement influenced the decision-making process. Concern surrounding sexual function, bladder preservation, and urostomy bags drove patients towards TMT. High levels of shared decision-making were observed overall, with a median SDM-Q-9 score of 95 (IQR 89-100). Patients undergoing TMT reported the highest median SDM-Q-9 score (97, IQR 94-100), while those receiving radical cystectomy alone had the lowest (66, IQR 37-96). CONCLUSIONS: Patients with MIBC described a multifaceted treatment decision-making process, highlighting key influences, concerns, and unmet needs. Understanding this process can help address misconceptions and align treatment choices with patient goals. Physicians can use these insights to engage in shared decision-making, ultimately improving patient experiences and outcomes.

Poor prognosis among radiation associated bladder cancer is defined by clinicogenomic features.

Radiation therapy (RT) for prostate cancer has been associated with an increased risk for the development of bladder cancer. We aimed to integrate clinical and genomic data to better understand the development of RT-associated bladder cancer. A retrospective analysis was performed to identify control (CTRL; n= 41) and RT-associated (n=41) bladder cancer patients. RT and CTRL specific features were then identified through integration and analysis of the genomic sequencing data and clinical variables. RT-associated bladder tumors were significantly enriched for alterations in KDM6A and ATM, while CTRL tumors were enriched for CDKN2A mutation. Globally, there was an increased number of variants within RT tumors, albeit at a lower variant allele frequency. Mutational signature analysis revealed three predominate motif patterns, with similarity to SBS2/13 (APOBEC3A), SBS5 (ERCC2/Smoking) and SBS6/15 (MMR). Poor prognostic factors in the RT cohort include, a short tumor latency, smoking status, the presence of the smoking and XRT mutational signatures, and CDKN2A copy number loss. Based on the clinical and genomic findings, we suggest, at least two potential pathways leading to RT-associated bladder cancer; the first, occurs in the setting of field cancerization, related to smoking or pre-existing genetic alterations and leads to the development of more aggressive bladder tumors, and the second, in which RT initiates the oncogenic process in otherwise healthy urothelium, leading to a longer latency and less aggressive disease.

Reporting Clinical Endpoints in Studies of Minimally Invasive Glaucoma Surgery.

Minimally invasive glaucoma surgery (MIGS) refers to a group of procedures generally characterized by an ab interno approach, minimal trauma to ocular tissue, moderate efficacy, an excellent safety profile, and rapid recovery. The number of MIGS procedures continues to increase, and their use has become widespread among glaucoma and cataract specialists. Standardization of the methodology and reporting of clinical endpoints in MIGS investigations enhances interpretation and comparison across different studies. The assessment of surgical interventions should not only consider statistical significance, but also whether the outcome is meaningful to patients. Minimal clinically important difference (MCID) is defined as the smallest change in a treatment outcome that is considered beneficial for an individual patient and prompts a change in their clinical management, and expert consensus is an accepted approach to determine the MCID. The American Academy of Ophthalmology's Glaucoma Preferred Practice Pattern Panel is an expert panel that develops guidelines identifying characteristics and components of quality eye care. The panel recommends that the cumulative probability of surgical success at 2 years with Kaplan-Meier survival analysis be used as the primary efficacy endpoint in MIGS studies. The panel suggests that surgical success for standalone MIGS be defined as intraocular pressure (IOP) ≤ 21 mmHg and reduced ≥ 20% from baseline without an increase in glaucoma medications, additional laser or incisional glaucoma surgery, loss of light perception vision, or hypotony. The proposed MCID for the cumulative probability of success of standalone MIGS at 2 years is 50%. The panel recommends that surgical success for MIGS combined with cataract extraction with intraocular lens implantation (CE-IOL) be defined as a decrease in glaucoma medical therapy ≥ 1 medication from baseline without an increase in IOP, or IOP ≤ 21 mmHg and reduced ≥ 20% from baseline without an increase in glaucoma medications, additional laser or incisional glaucoma surgery, loss of light perception vision, or hypotony. The suggested MCID for the cumulative probability of success for CE-IOL/MIGS at 2 years is 65%.

Complications, Visual Acuity, and Refractive Error 3 Years after Secondary Intraocular Lens Implantation for Pediatric Aphakia.

PURPOSE: To report the cumulative incidence of complications and to describe refractive error and visual acuity (VA) outcomes in children undergoing secondary intraocular lens (IOL) implantation after previous surgery for nontraumatic cataract. DESIGN: Pediatric cataract registry. PARTICIPANTS: Eighty children (108 eyes: 60 bilateral, 48 unilateral) undergoing lensectomy at younger than 13 years of age. METHODS: Annual data collection from medical record review through 5 years after lensectomy. MAIN OUTCOME MEASURES: Cumulative incidence of newly emergent complications after secondary IOL implantation; refractive error and VA by 5 years after lensectomy. RESULTS: Median follow-up after secondary IOL implantation was 2.7 years (interquartile range [IQR], 0.8-3.3 years; range, 0.6-5.0 years) for bilateral and 2.1 years (range, 0.5-6.4 years) for unilateral cases. A common complication after secondary IOL implantation was a glaucoma-related adverse event (GRAE; glaucoma or glaucoma suspect); the cumulative incidence was 17% (95% confidence interval [CI], 3%-29%) in bilateral cases and 12% (95% CI, 0%-23%) in unilateral cases. The cumulative incidence of surgery for visual axis opacification was 2% (95% CI, 0%-7%) for bilateral cases and 4% (95% CI, 0%-10%) for unilateral cases. The median prediction error within 90 days of implantation was 0.88 diopter (D; IQR, -0.50 to +3.00 D) less hyperopic than intended among 21 eyes for bilateral cases and 1.50 D (IQR, -0.25 to +2.38 D) less among 19 unilateral cases. The median spherical equivalent refractive error at 5 years (at a median of 5.1 years of age) in eyes receiving a secondary IOL was +0.50 D (IQR, -2.38 to +2.94 D) for 48 bilateral cases and +0.06 D (IQR, -2.25 to +0.75 D) for 22 unilateral cases. Median monocular VA at 5 years was 20/63 (IQR, 20/50-20/100) for bilateral cases (n = 42) and 20/400 (IQR, 20/160-20/800) for unilateral cases (n = 33). CONCLUSIONS: Eyes with secondary IOL implantation have a risk of developing new GRAEs. Five years after lensectomy (approximately 2.5 years after secondary IOL implantation), the average refractive error was less hyperopic than desired given the anticipated further myopic shift before refraction stabilizes. FINANCIAL DISCLOSURE(S): Proprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.

Quality by design approach for fabrication of extended-release buccal films for xerostomia employing hot-melt extrusion technology.

The study endeavors the fabrication of extended-release adipic acid (APA) buccal films employing a quality by design (QbD) approach. The films intended for the treatment of xerostomia were developed utilizing hot-melt extrusion technology. The patient-centered quality target product profile was created, and the critical quality attributes were identified accordingly. Three early-stage formulation development trials, complemented by risk assessment aligned the formulation and process parameters with the product quality standards. Employing a D-optimal mixture design, the formulations were systematically optimized by evaluating three formulation variables: amount of the release-controlling polymer Eudragit® (E RSPO), bioadhesive agent Carbopol® (CBP 971P), and pore forming agent polyethylene glycol (PEG 1500) as independent variables, and % APA release in 1, 4 and 8 h as responses. Using design of experiment software (Design-Expert®), a total of 16 experimental runs were computed and extruded using a Thermofisher ScientificTM twin screw extruder. All films exhibited acceptable content uniformity and extended-release profiles with the potential for releasing APA for at least 8 h. Films containing 30% E RSPO, 10% CBP 971P, and 20% PEG 1500 released 88.6% APA in 8 h. Increasing the CBP concentration enhanced adhesiveness and swelling capacities while decreasing E RSPO concentration yielded films with higher mechanical strength. The release kinetics fitted well into Higuchi and Krosmeyer-Peppas models indicating a Fickian diffusion release mechanism.

Prognostic utility of biopsy-based PTEN and ERG status on biochemical progression and overall survival after SBRT for localized prostate cancer.

Introduction/background: Phosphatase and tensin homolog (PTEN) genomic deletions and transmembrane protease, serine 2/v-ets avian erthyroblastosis virus E26 oncogene homolog (ERG) rearrangements are two of the most common genetic abnormalities associated with prostate cancer. Prior studies have demonstrated these alterations portend worse clinical outcomes. Our objective is to evaluate the impact of biopsy-determined PTEN losses and TMPRSS2-ERG fusion on biochemical progression-free survival (bPFS) and overall survival (OS) in patients who receive SBRT for localized prostate cancer. Methods/materials: Patients received SBRT for localized prostate cancer on a prospective quality-of-life (QoL) and cancer outcomes study. For each patient, the single biopsy core with the highest grade/volume of cancer was evaluated for PTEN and ERG abnormalities. Differences in baseline patient and disease characteristics between groups were analyzed using ANOVA for age and χ2 for categorical groupings. bPFS and OS were calculated using the Kaplan Meier (KM) method with Log-Rank test comparison between groups. Predictors of bPFS and OS were identified using the Cox proportional hazards method. For all analyses, p <0.05 was considered statistically significant. Results: Ninety-nine consecutive patients were included in the analysis with a median follow-up of 72 months. A statistically significant improvement in bPFS (p = 0.018) was observed for wild type ERG patients with an estimated 5-year bPFS of 94.1% vs. 72.4%. Regarding PTEN mutational status, significant improvements in were observed in both bPFS (p = 0.006) and OS (p < 0.001), with estimated 5-year bPFS rates of 91.0% vs. 67.9% and 5-year OS rates of 96.4% vs. 79.4%. When including both ERG and PTEN mutational status in the analysis, there were statistically significant differences in both bPFS (p = 0.011) and OS (p < 0.001). The estimated 5-year bPFS rates were 100%, 76.6%, 72.9%, and 63.8% for patients with ERG+/PTEN+, ERG-/PTEN+, ERG+/PTEN-, and ERG-/PTEN- phenotypes respectively. The estimated 5-year OS rates were 93.9%, 100%, 80.0%, and 78.7% for patients with ERG+/PTEN+, ERG-/PTEN+, ERG+/PTEN-, and ERG-/PTEN- phenotypes respectively. Conclusion: ERG rearrangements and PTEN deletions detected on biopsy samples are associated with poorer oncologic outcomes in prostate cancer patients treated with SBRT and merit further study in a dedicated prospective trial.

Target Delineation in Postoperative Radiation Therapy for Head and Neck Cancer After Flap Reconstruction.

Delineation of the clinical target volume (CTV) after resection of head and neck cancer can be challenging, especially after flap reconstruction. The main area of contention is whether the entire flap should be included in the CTV. Several case series have reported marginal misses and intraflap failures when the entire flap was not routinely included in the CTV. On the other hand, available data have not convincingly demonstrated a detriment to long-term outcomes using intensity modulated radiotherapy after flap reconstruction. On the contrary, postoperative radiation can facilitate epilation and mucosalization of the flap tissue, reduce flap bulk, and improve long-term esthetic and functional outcomes. Therefore, our standard practice is to include the entire flap in the CTV. In certain scenarios, we may allow for a lower dose to part of flap distant from the resection bed than the flap-tumor bed junction, where recurrences are most likely. We provide three case vignettes describing such scenarios where sparing part of the flap, and more importantly, the nearby uninvolved native tissue, from high-dose radiation may be justified.

Isolated ectopia lentis with partial anterior dislocation and pupillary block: a case report.

BACKGROUND: Ectopia lentis is the dislocation of the natural crystalline lens and usually presents in the setting of trauma or other systemic diseases. Herein, we describe a case of an otherwise healthy four-year-old boy with isolated ectopia lentis whose partial lens dislocation was captured on a smartphone by the patient's father several days prior. CASE PRESENTATION: A four-year-old boy with no past medical, developmental, or trauma history presented with bilateral partial anterior lens dislocation with pupillary block. Initial ophthalmic evaluation two months prior was notable for uncorrected visual acuity at 20/100 OD, 20/250 OS, bilateral iridodenesis, and partially dislocated lenses inferonasally OD and inferiorly OS on slit lamp. Genetic testing found no abnormalities. Ten months later, the patient developed sudden onset of left eye pain. A dislocated lens and temporarily dilated left pupil were captured on a smartphone by the patient's father. He was evaluated 3 days later after a second episode and found to have hand motion vision OS, a fixed 8 mm left pupil with the crystalline lens subluxed into the pupil space and accompanying intraocular pressure OS of 40 mmHg. The lens was surgically removed with a limited anterior vitrectomy. Four and a half years after surgery, visual acuity was 20/125 OS with aphakic correction. The right eye eventually underwent prophylactic lensectomy and was 20/30 in aphakic correction. CONCLUSIONS: This report presents a unique presentation of isolated ectopia lentis with anterior lens dislocation and pupillary block and illustrates the role of smartphone photography in assisting in the triage of eye emergencies.

Myths in Myopia Epidemiology and Treatment.

This Viewpoint discusses common myths about myopia and educational strategies for bringing clinical practice better in line with evidence.

Formulation Development of Solid Self-Nanoemulsifying Drug Delivery Systems of Quetiapine Fumarate via Hot-Melt Extrusion Technology: Optimization Using Central Composite Design.

Quetiapine fumarate (QTF) was approved for the treatment of schizophrenia and acute manic episodes. QTF can also be used as an adjunctive treatment for major depressive disorders. QTF oral bioavailability is limited due to its poor aqueous solubility and pre-systemic metabolism. The objective of the current investigation was the formulation development and manufacturing of solid self-nanoemulsifying drug delivery system (S-SNEDDS) formulation through a single-step continuous hot-melt extrusion (HME) process to address these drawbacks. In this study, Capmul® MCM, Gelucire® 48/16, and propylene glycol were selected as oil, surfactant, and co-surfactant, respectively, for the preparation of S-SNEDDS. Soluplus® and Klucel™ EF (1:1) were selected as the solid carrier. Response surface methodology in the form of central composite design (CCD) was utilized in the current experimental design to develop the S-SNEDDS formulations via a continuous HME technology. The developed formulations were evaluated for self-emulsifying properties, particle size distribution, thermal behavior, crystallinity, morphology, physicochemical incompatibility, accelerated stability, and in vitro drug release studies. The globule size and emulsification time of the optimized SNEDDS formulation was 92.27 ± 3.4 nm and 3.4 ± 3.38 min. The differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies revealed the amorphous nature of the drug within the formulation. There were no drug-excipient incompatibilities observed following the Fourier transform infrared (FTIR) spectroscopy. The optimized formulation showed an extended-release profile for 24 h. The optimized formulation was stable for three months (last time-point tested) at 40 °C/75% RH. Therefore, the developed S-SNEDDS formulation could be an effective oral delivery platform for QTF and could lead to better therapeutic outcomes.

Formulation and evaluation of inhaled Sildenafil-loaded PLGA microparticles for treatment of pulmonary arterial hypertension (PAH): A novel high drug loaded formulation and scalable process via hot melt extrusion technology (Part â ).

In recent years, several techniques were employed to develop a local sustained pulmonary delivery of sildenafil citrate (SC) as an alternative for the intravenous and oral treatment of pulmonary arterial hypertension (PAH). Most of these methods, however, need to be improved due to limitations of scalability, low yield production, low drug loading, and stability issues. In this study, we report the use of hot-melt extrusion (HME) as a scalable process for making Poly (lactic-co-glycolic acid) (PLGA) microparticles with high SC load. The prepared particles were tested in vitro for local drug delivery to the lungs by inhalation. Sodium bicarbonate was included as a porogen in the formulation to make the particles more brittle and to impart favorable aerodynamic properties. Six formulations were prepared with different formulation compositions. Laser diffraction analysis was used to estimate the geometric particle size distribution of the microparticles. In-vitro aerodynamic performance was evaluated by the next-generation cascade impactor (NGI). It was reported in terms of an emitted dose (ED), an emitted fraction (EF%), a respirable fraction (RF%), a fine particle fraction (FPF%), a mass median aerodynamic diameter (MMAD), and geometric standard deviation (GSD). The formulations have also been characterized for surface morphology, entrapment efficiency, drug load, and in-vitro drug release. The results demonstrated that PLGA microparticles have a mean geometric particle size between 6 and 14 µm, entrapment efficiency of 77 to 89 %, and SC load between 17 and 33 % w/w. Fifteen percent of entrapped sildenafil was released over 24 h from the PLGA microparticles, and seventy percent over 7 days. The aerodynamic properties included fine particle fraction ranging between 19 and 33 % and an average mass median aerodynamic diameter of 6-13 µm.

Assessing Abuse-Deterrent formulations utilizing Ion-Exchange resin complexation processed via Twin-Screw granulation for improved safety and effectiveness.

Opioid misuse is a public health crisis in the United States. In response, the FDA has approved drug products with abuse-deterrent features to reduce the risk of prescription opioid abuse. Abuse-deterrent formulations (ADFs) typically employ physical or chemical barriers or incorporate agonist-antagonist combinations as mechanisms to deter misuse. This study aims to assess the impact of abuse-deterrent properties, specifically ion-exchange resin complexation as a chemical barrier, on a model drug, promethazine hydrochloride (PMZ) tablets. Various formulations were developed through twin-screw wet granulation (TSWG) followed by twin-screw melt granulation (TSMG). In the TSWG process, the drug interacts with the resin through an exchange reaction, forming a drug-resin complex. Additionally, the study explored factors influencing the complex formation between the drug and resin, using the drug loading status as an indicator. DSC and ATR studies were carried out to confirm the formation of the drug-resin complex. Subsequently, hot melt granulation was employed to create a matrix tablet incorporating Kollidon® SR and Kollicoat® MAE 100P, thereby enabling sustained release properties. The drug-resin complex embedded in the matrix effectively deters abuse through methods like smoking, snorting, or parenteral injection, unless the drug can be extracted. In order to assess this, solvent extraction studies were conducted using an FDA-recommended solvents, determining the potential for abuse. Further investigations involved dissolution tests in change-over media, confirming the extended-release properties of the formulation. Results from dissolution studies comparing the ground and intact tablets provided positive evidence of the formulation's effectiveness in deterring abuse. Finally, alcohol-induced dose-dumping studies were conducted in compliance with FDA guidelines, concluding that the formulation successfully mitigates dose dumping in the presence of alcohol.

Development of multiple structured extended release tablets via hot melt extrusion and dual-nozzle fused deposition modeling 3D printing.

The study aims to fabricate extended release (ER) tablets using a dual-nozzle fused deposition modeling (FDM) three-dimensional (3D) printing technology based on hot melt extrusion (HME), using caffeine as the model compound. Three different ER tablets were developed, which obtained "delayed-release", "rapid-sustained release", and "release-lag-release" properties. Each type of tablet was printed with two different formulations. A novel printing method was employed in this study, which is to push the HME filament from behind with polylactic acid (PLA) to prevent sample damage by gears during the printing process. Powder X-ray diffractometry (PXRD) and differential scanning calorimetry (DSC) results showed that caffeine was predominately amorphous in the final tablets. The dissolution of 3D printed tablets was assessed using a USP-II dissolution apparatus. ER tablets containing PVA dissolved faster than those developed with Kollicoat IR. Overall, this study revealed that ER tablets were successfully manufactured through HME paired with dual-nozzle FDM 3D printing and demonstrated the power of 3D printing in developing multi-layer tablets with complex structures.

High-risk prostate cancer treated with a stereotactic body radiation therapy boost following pelvic nodal irradiation.

Purpose: Modern literature has demonstrated improvements in long-term biochemical outcomes with the use of prophylactic pelvic nodal irradiation followed by a brachytherapy boost in the management of high-risk prostate cancer. However, this comes at the cost of increased treatment-related toxicity. In this study, we explore the outcomes of the largest cohort to date, which uses a stereotactic body radiation therapy (SBRT) boost following pelvic nodal radiation for exclusively high-risk prostate cancer. Methods and materials: A large institutional database was interrogated to identify all patients with high-risk clinical node-negative prostate cancer treated with conventionally fractionated radiotherapy to the pelvis followed by a robotic SBRT boost to the prostate and seminal vesicles. The boost was uniformly delivered over three fractions. Toxicity was measured using the Common Terminology Criteria for Adverse Events (CTCAE) version 5.0. Oncologic outcomes were assessed using the Kaplan-Meier method. Cox proportional hazard models were created to evaluate associations between pretreatment characteristics and clinical outcomes. Results: A total of 440 patients with a median age of 71 years were treated, the majority of whom were diagnosed with a grade group 4 or 5 disease. Pelvic nodal irradiation was delivered at a total dose of 4,500 cGy in 25 fractions, followed by a three-fraction SBRT boost. With an early median follow-up of 2.5 years, the crude incidence of grade 2+ genitourinary (GU) and gastrointestinal (GI) toxicity was 13% and 11%, respectively. Multivariate analysis revealed grade 2+ GU toxicity was associated with older age and a higher American Joint Committee on Cancer (AJCC) stage. Multivariate analysis revealed overall survival was associated with patient age and posttreatment prostate-specific antigen (PSA) nadir. Conclusion: Utilization of an SBRT boost following pelvic nodal irradiation in the treatment of high-risk prostate cancer is oncologically effective with early follow-up and yields minimal high-grade toxicity. We demonstrate a 5-year freedom from biochemical recurrence (FFBCR) of over 83% with correspondingly limited grade 3+ GU and GI toxicity measured at 3.6% and 1.6%, respectively. Long-term follow-up is required to evaluate oncologic outcomes and late toxicity.

Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation-Where Are We Now?

Hot-melt extrusion (HME) is a globally recognized, robust, effective technology that enhances the bioavailability of poorly soluble active pharmaceutical ingredients and offers an efficient continuous manufacturing process. The twin-screw extruder (TSE) offers an extremely resourceful customizable mixer that is used for continuous compounding and granulation by using different combinations of conveying elements, kneading elements (forward and reverse configuration), and distributive mixing elements. TSE is thus efficiently utilized for dry, wet, or melt granulation not only to manufacture dosage forms such as tablets, capsules, or granule-filled sachets, but also for designing novel formulations such as dry powder inhalers, drying units for granules, nanoextrusion, 3D printing, complexation, and amorphous solid dispersions. Over the past decades, combined academic and pharmaceutical industry collaborations have driven novel innovations for HME technology, which has resulted in a substantial increase in published articles and patents. This article summarizes the challenges and models for executing HME scale-up. Additionally, it covers the benefits of continuous manufacturing, process analytical technology (PAT) considerations, and regulatory requirements. In summary, this well-designed review builds upon our earlier publication, probing deeper into the potential of twin-screw extruders (TSE) for various new applications.

3D printing in vaginal drug delivery: a revolution in pharmaceutical manufacturing.

INTRODUCTION: The Food and Drug Administration's approval of the first three-dimensional (3D) printed tablet, Spritam®, led to a burgeoning interest in using 3D printing to fabricate numerous drug delivery systems for different routes of administration. The high degree of manufacturing flexibility achieved through 3D printing facilitates the preparation of dosage forms with many actives with complex and tailored release profiles that can address individual patient needs. AREAS COVERED: This comprehensive review provides an in-depth look into the several 3D printing technologies currently utilized in pharmaceutical research. Additionally, the review delves into vaginal anatomy and physiology, 3D-printed drug delivery systems for vaginal applications, the latest research studies, and the challenges of 3D printing technology and future possibilities. EXPERT OPINION: 3D printing technology can produce drug-delivery devices or implants optimized for vaginal applications, including vaginal rings, intra-vaginal inserts, or biodegradable microdevices loaded with drugs, all custom-tailored to deliver specific medications with controlled release profiles. However, though the potential of 3D printing in vaginal drug delivery is promising, there are still challenges and regulatory hurdles to overcome before these technologies can be widely adopted and approved for clinical use. Extensive research and testing are necessary to ensure safety, effectiveness, and biocompatibility.