ABSTRACT
The significance of metal-semiconductor interfaces and their impact on electronic device performance have gained increasing attention, with a particular focus on investigating the contact metal. However, another avenue of exploration involves substituting the contact metal at the metal-semiconductor interface of field-effect transistors with semiconducting layers to introduce additional functionalities to the devices. Here, a scalable approach for fabricating metal-oxide-semiconductor (channel)-semiconductor (interfacial layer) field-effect transistors is proposed by utilizing solution-processed semiconductors, specifically semiconducting single-walled carbon nanotubes and molybdenum disulfide, as the channel and interfacial semiconducting layers, respectively. The work function of the interfacial MoS2 is modulated by controlling the sulfur vacancy concentration through chemical treatment, which results in distinctive energy band alignments within a single device configuration. The resulting band alignments lead to multiple functionalities, including multivalued transistor characteristics and multibit nonvolatile memory (NVM) behavior. Moreover, leveraging the stable NVM properties, we demonstrate artificial synaptic devices with 88.9% accuracy of MNIST image recognition.
ABSTRACT
This paper describes a nanofabrication procedure that can generate multiscale substrates with quasi-random microregions of nanoparticle arrays having different periodicities and metals. We combine cycles of large-area nanoparticle array fabrication with solvent-assisted wrinkle lithography to mask and etch quasi-random areas of prefabricated nanoparticles to control the fill factors of the arrays. The approach is highly flexible, and parameters, including nanoparticle size and material, array geometry, and fill factor, can be tailored independently. Multimetallic nanoparticle arrays can support surface lattice resonances at fill factors as low as 20% and can function as nanoscale cavities for lasing action with as few as 10% of the nanoparticles in an array. We demonstrated that multimetallic nanoparticle substrates that combine two or three arrays with different periodicities can exhibit lasing responses over visible and near-infrared wavelengths. Our work showcases the robust optical responses of multimetallic and periodic devices for broadband light manipulation.
ABSTRACT
This paper describes an approach to generate hierarchical wrinkles in two-dimensional (2D) electronic materials with spatial control over adjacent wavelengths. A rigid fluoropolymer mold was used to pattern a sacrificial polymer skin layer on monolayer graphene, molybdenum disulfide, and hexagonal boron nitride on prestrained thermoplastic sheets. Strain relief and removal of the polymer layer resulted in 2D-material wrinkles whose wavelengths scaled linearly with the local skin thickness. A second generation of wrinkles could be created on top of the first generation by applying a subsequent cycle of polymer skin coating, strain relief, and polymer removal. This area-specific hierarchical wrinkling is general and will facilitate the engineering of the local properties of various 2D materials and their heterostructures.
ABSTRACT
Two-dimensional (2D) semiconductors are promising for next-generation electronics that are lightweight, flexible, and stretchable. Achieving stretchability with suppressed crack formation, however, is still difficult without introducing lithographically etched micropatterns, which significantly reduces active device areas. Herein, we report a solution-based hierarchical structuring to create stretchable semiconducting films that are continuous over wafer-scale areas via self-assembly of two-dimensional nanosheets. Electrochemically exfoliated MoS2 nanosheets with large lateral sizes (â¼1 µm) are first assembled into a uniform film on a prestrained thermoplastic substrate, followed by strain relief of the substrate to create nanoscale wrinkles. Subsequent strain-relief cycles with the presence of soluble polymer films produce hierarchical wrinkles with multigenerational structures. Stretchable MoS2 films are then realized by curing an elastomer directly on the wrinkled surface and dissolving the thermoplastic. Three-generation hierarchical MoS2 wrinkles are resistant to cracking up to nearly 100% substrate stretching and achieve drastically enhanced photoresponsivity compared to the flat counterpart over the visible and NIR regimes, while the flat MoS2 film is beneficial in creating strain sensors because of its strain-dependent electrical response.
ABSTRACT
2D van der Waals (vdW) materials have been considered as potential building blocks for use in fundamental elements of electronic and optoelectronic devices, such as electrodes, channels, and dielectrics, because of their diverse and remarkable electrical properties. Furthermore, two or more building blocks of different electronic types can be stacked vertically to generate vdW heterostructures with desired electrical behaviors. However, such fundamental approaches cannot directly be applied practically because of issues such as precise alignment/positioning and large-quantity material production. Here, these limitations are overcome and wafer-scale vdW heterostructures are demonstrated by exploiting the lateral and vertical assembly of solution-processed 2D vdW materials. The high exfoliation yield of the molecular intercalation-assisted approach enables the production of micrometer-sized nanosheets in large quantities and its lateral assembly in a wafer-scale via vdW interactions. Subsequently, the laterally assembled vdW thin-films are vertically assembled to demonstrate various electronic device applications, such as transistors and photodetectors. Furthermore, multidimensional vdW heterostructures are demonstrated by integrating 1D carbon nanotubes as a p-type semiconductor to fabricate p-n diodes and complementary logic gates. Finally, electronic devices are fabricated via inkjet printing as a lithography-free manner based on the stable nanomaterial dispersions.
ABSTRACT
Multi-valued logic gates are demonstrated on solution-processed molybdenum disulfide (MoS2) thin films. A simple chemical doping process is added to the conventional transistor fabrication procedure to locally increase the work function of MoS2 by decreasing sulfur vacancies. The resulting device exhibits pseudo-heterojunctions comprising as-processed MoS2 and chemically treated MoS2 (c-MoS2). The energy-band misalignment of MoS2 and c-MoS2 results in a sequential activation of the MoS2 and c-MoS2 channel areas under a gate voltage sweep, which generates a stable intermediate state for ternary operation. Current levels and turn-on voltages for each state can be tuned by modulating the device geometries, including the channel thickness and length. The optimized ternary transistors are incorporated to demonstrate various ternary logic gates, including the inverter, NMIN, and NMAX gates.
ABSTRACT
Following the significant discovery of van der Waals (vdW) layered materials with diverse electronic properties over more than a decade ago, the scalable production of high-quality vdW layered materials has become a critical goal to enable the transformation of fundamental studies into practical applications in electronics. To this end, solution-based processing has been proposed as a promising technique to yield vdW layered materials in large quantities. Moreover, the resulting dispersions are compatible with cost-effective device fabrication processes such as inkjet printing and roll-to-roll manufacturing. Despite these advantages, earlier works on solution-based processing methods (i.e., direct liquid-phase exfoliation or alkali-metal intercalation) have several challenges in achieving high-performance electronic devices, such as structural polydispersity in thickness and lateral size or undesired phase transformation. These challenges hinder the utilization of the solution-processed materials in the limited fields of electronics such as electrodes and conductors. In the meantime, the groundbreaking discovery of another solution-based approach, molecular intercalation-based electrochemical exfoliation, has shown significant potential for the use of vdW layered materials in scalable electronics owing to the nearly ideal structure of the exfoliated samples. The resulting materials are highly monodispersed, atomically thin, and reasonably large, enabling the preparation of electronically active thin-film networks via successful vdW interface formation. The formation of vdW interfaces is highly important for efficient plane-to-plane charge transport and mechanical stability under various deformations, which are essential to high-performance, flexible electronics. In this Perspective, we survey the latest developments in solution-based processing of vdW layered materials and their electronic applications while also describing the field's future outlook in the context of its current challenges.
ABSTRACT
Two-dimensional molybdenum disulfide (MoS2) nanosheets have emerged as a promising material for transparent, flexible micro-supercapacitors, but their use in electrodes is hindered by their poor electrical conductivity and cycling stability because of restacking. In this paper, we report a novel electrode architecture to exploit electrochemical activity of MoS2 nanosheets. Electrochemically exfoliated MoS2 dispersion was spin coated on mesh-like silver networks encapsulated with a flexible conducting film exhibiting a pseudocapacitive behavior. MoS2 nanosheets were electrochemically active over the whole electrode surface and the conductive layer provided a pathway to transport electrons between the MoS2 and the electrolyte. As the result, the composite electrode achieved a large areal capacitance (89.44 mF cm-2 at 6 mA cm-2) and high energy and power densities (12.42 µWh cm-2 and P = 6043 µW cm-2 at 6 mA cm-2) in a symmetric cell configuration with 3 M KOH solution while exhibiting a high optical transmittance of ~80%. Because the system was stable against mechanical bending and charge/discharge cycles, a flexible micro-supercapacitor that can power electronics at different bending states was realized.
ABSTRACT
The formation of ordered magnetic domains in thin films is important for the magnetic microdevices in spin-electronics, magneto-optics, and magnetic microelectromechanical systems. Although inducing anisotropic stress in magnetostrictive materials can achieve the domain assembly, controlling magnetic anisotropy over microscale areas is challenging. In this work, we realized the microscopic patterning of magnetic domains by engineering stress distribution. Deposition of ferromagnetic thin films on nanotrenched polymeric layers induced tensile stress at the interfaces, giving rise to the directional magnetoelastic coupling to form ordered domains spontaneously. By changing the periodicity and shape of nanotrenches, we spatially tuned the geometric configuration of domains by design. Theoretical analysis and micromagnetic characterization confirmed that the local stress distribution by the topographic confinement dominates the forming mechanism of the directed magnetization.
ABSTRACT
Wrinkling skin layers on pre-strained polymer sheets has drawn significant interest as a method to create reconfigurable surface patterns. Compared to widely studied metal or silica films, softer polymer skins are more tolerant to crack formation when the surface topography is tuned under applied strain. This Mini-review discusses recent progress in mechano-responsive wrinkles based on polymer skin materials. Control over the skin thickness with nanometer accuracy allows for tuning of the wrinkle wavelength and orientation over length scales from nanometer to micrometer regimes. Furthermore, soft skin layers enable texturing of two-dimensional electronic materials with programmable feature sizes and structural hierarchy because of the conformal adhesion to the substrates. Soft skin systems open prospects to tailor a range of surface properties via external stimuli important for applications such as smart windows, microfluidics, and nanoelectronics.
ABSTRACT
This paper describes an all-soft, templated assembly of block copolymers (BCPs) with programmable alignment. Using polymeric nanowrinkles as a confining scaffold, poly(styrene)-block-poly(dimethylsiloxane) (PS-b-PDMS) BCPs were assembled to be parallel or perpendicular to the wrinkle orientation by manipulating the substrate strain. Self-consistent field theory modeling revealed that wrinkle curvature and surface affinity govern the BCP structural formation. Furthermore, control of BCP alignment was demonstrated for complex wrinkle geometries, various copolymer molecular weights, and functional wrinkle skin layers. This integration of BCP patterning with flexible 3D architectures offers a promising nanolithography approach for next-generation soft electronics.
ABSTRACT
This paper reports a method to realize crack-free graphene wrinkles with variable spatial wavelengths and switchable orientations. Graphene supported on a thin fluoropolymer and prestrained elastomer substrate can exhibit conformal wrinkling after strain relief. The wrinkle orientation could be switched beyond the intrinsic fracture limit of graphene for hundreds of cycles of stretching and releasing without forming cracks. Mechanical modeling revealed that the fluoropolymer layer mediated the structural evolution of the graphene wrinkles without crack formation or delamination. Patterned fluoropolymer layers with different thicknesses produced wrinkles with controlled wavelengths and orientations while maintaining the mechanical integrity of graphene under high tensile strain.
ABSTRACT
This paper reports a scalable approach to achieve spatially selective graphene functionalization using multiscale wrinkles. Graphene wrinkles were formed by relieving the strain in thermoplastic polystyrene substrates conformally coated with fluoropolymer and graphene skin layers. Chemical reactivity of a fluorination process could be tuned by changing the local curvature of the graphene nanostructures. Patterned areas of graphene nanowrinkles and crumples followed by a single-process plasma reaction resulted in substrates with regions having different fluorination levels. Notably, conductivity of the functionalized graphene nanostructures could be locally tuned as a function of feature size without affecting the mechanical properties.
ABSTRACT
This paper investigates the correlation between the random lasing properties of organic waveguides made by poly-(9-9dioctylfluorene) (PFO) thin films and the morphology of wrinkled corrugated substrates. The capability to individually control the wrinkle wavelength, shape, and height allows us to separately investigate their role on the sample emission properties. We demonstrate that the main parameter determining the presence of coherent random lasing is the substrate roughness and that, contrary to what could be qualitatively expected, as the roughness increases, coherent random lasing is progressively reduced. Coherent random lasing is observed only for a substrate roughness below 33 nm, while higher roughness leads to amplified spontaneous emission (up to 70 nm) or to the absence of light amplification in the film (above 70 nm). We demonstrate that this result is due to a progressive reduction of the light amplification efficiency in the PFO film, evidencing that coherent random lasing can be obtained only with a right interplay between light amplification and scattering. Besides clarifying the basic aspects of random lasing in organic waveguides, our work opens the way to the realization of organic random lasers with predictable emission properties, thanks to the high control level of the scattering properties of the wrinkled corrugated surfaces.
ABSTRACT
This paper describes polymeric nanostructures with dynamically tunable wetting properties. Centimeter-scale areas of monolithic nanoridges can be generated by strain relief of thermoplastic polyolefin films with fluoropolymer skin layers. Changing the amount of strain results in polyolefin ridges with aspect ratios greater than four with controlled feature densities. Surface chemistry and topography are demonstrated to be able to be tailored by SF6 -plasma etching to access multiple wetting states: Wenzel, Cassie-Baxter, and Cassie-impregnating states. Reversible transitions among the wetting states can be realized in a programmable manner by cyclic stretching and reshrinking the patterned substrates without delamination and cracking.
ABSTRACT
Nanostructured surfaces with quasi-random geometries can manipulate light over broadband wavelengths and wide ranges of angles. Optimization and realization of stochastic patterns have typically relied on serial, direct-write fabrication methods combined with real-space design. However, this approach is not suitable for customizable features or scalable nanomanufacturing. Moreover, trial-and-error processing cannot guarantee fabrication feasibility because processing-structure relations are not included in conventional designs. Here, we report wrinkle lithography integrated with concurrent design to produce quasi-random nanostructures in amorphous silicon at wafer scales that achieved over 160% light absorption enhancement from 800 to 1,200 nm. The quasi-periodicity of patterns, materials filling ratio, and feature depths could be independently controlled. We statistically represented the quasi-random patterns by Fourier spectral density functions (SDFs) that could bridge the processing-structure and structure-performance relations. Iterative search of the optimal structure via the SDF representation enabled concurrent design of nanostructures and processing.
ABSTRACT
Soft skin layers on elastomeric substrates are demonstrated to support mechano-responsive wrinkle patterns that do not exhibit cracking under applied strain. Soft fluoropolymer skin layers on pre-strained poly(dimethylsiloxane) slabs achieved crack-free surface wrinkling at high strain regimes not possible by using conventional stiff skin layers. A side-by-side comparison between the soft and hard skin layers after multiple cycles of stretching and releasing revealed that the soft skin layer enabled dynamic control over wrinkle topography without cracks or delamination. We systematically characterized the evolution of wrinkle wavelength, amplitude, and orientation as a function of tensile strain to resolve the crack-free structural transformation. We demonstrated that wrinkled surfaces can guide water spreading along wrinkle orientation, and hence switchable, anisotropic wetting was realized.
Subject(s)
Anisotropy , Biomechanical Phenomena , Wettability , Dimethylpolysiloxanes/chemistry , Microscopy, Atomic Force , Surface PropertiesABSTRACT
This paper describes how delamination-free, hierarchical patterning of graphene can be achieved on prestrained thermoplastic sheets by surface wrinkling. Conformal contact between graphene and the substrate during strain relief was maintained by the presence of a soft skin layer, resulting in the uniform patterning of three-dimensional wrinkles over large areas (>cm2). The graphene wrinkle wavelength was tuned from the microscale to the nanoscale by controlling the thickness of the skin layer with 1 nm accuracy to realize a degree of control not possible by crumpling, which relies on delamination. Hierarchical patterning of the skin layers with varying thicknesses enabled multiscale graphene wrinkles with predetermined orientations to be formed. Significantly, hierarchical graphene wrinkles exhibited tunable mechanical stiffness at the nanoscale without compromising the macroscale electrical conductivity.