High-Resolution Micro-object Separation by Rotating Magnetic Chromatography.

The development of new technologies for the separation, selection, and isolation of microparticles such as rare target cells, circulating tumor cells, cancer stem cells, and immune cells has become increasingly important in the last few years. Microparticle separation technologies are usually applied to the analysis of disease-associated cells, but these procedures often face a cell separation problem that is often insufficient for single specific cell analyses. To overcome these limitations, a highly accurate size-based microparticle separation technique, herein called "rotating magnetic chromatography", is proposed in this work. Magnetic nanoparticles, placed in a microfluidic separation channel, are forced to move in well-defined trajectories by an external magnetic field, colliding with microparticles that are in this way separated on the basis of their dimensions with high accuracy and reproducibility. The method was optimized by using fluorescein isothiocyanate-modified polystyrene particles (chosen as a reference standard) and then applied to the analysis of cancer cells like Hep-3B and SK-Hep-1, allowing their fast and high-resolution chromatographic separation as a function of their dimensions. Due to its unmatched sub-micrometer cell separation capabilities, RMC can be considered a break-through technique that can unlock new perspectives in different scientific fields, that is, in medical oncology.

Circular Nonuniform Electric Field Gel Electrophoresis for the Separation and Concentration of Nanoparticles.

A circular nonuniform electric field strategy coupled with gel electrophoresis was proposed to control the precise separation and efficient concentration of nano- and microparticles. The circular nonuniform electric field has the feature of exponential increase in the electric field intensity along the radius, working with three functional zones of migration, acceleration, and concentration. The distribution form of electric field lines is regulated in functional zones to control the migration behaviors of particles for separation and concentration by altering the relative position of the ring electrode (outside) and rodlike electrode (inner). The circular nonuniform electric field promotes the target-type and high-precision separation of nanoparticles based on the difference in charge-to-size ratio. The concentration multiple of nanoparticles is also controlled randomly with the alternation of radius, taking advantage of vertical extrusion and concentric converging of the migration path. This work provides a brand new insight into the simultaneous separation and concentration of particles and is promising for developing a versatile tool for the separation and preparation of various samples instead of conventional methods.

Deletion and tandem duplications of biosynthetic genes drive the diversity of triterpenoids in Aralia elata.

Araliaceae species produce various classes of triterpene and triterpenoid saponins, such as the oleanane-type triterpenoids in Aralia species and dammarane-type saponins in Panax, valued for their medicinal properties. The lack of genome sequences of Panax relatives has hindered mechanistic insight into the divergence of triterpene saponins in Araliaceae. Here, we report a chromosome-level genome of Aralia elata with a total length of 1.05 Gb. The loss of 12 exons in the dammarenediol synthase (DDS)-encoding gene in A. elata after divergence from Panax might have caused the lack of dammarane-type saponin production, and a complementation assay shows that overexpression of the PgDDS gene from Panax ginseng in callus of A. elata recovers the accumulation of dammarane-type saponins. Tandem duplication events of triterpene biosynthetic genes are common in the A. elata genome, especially for AeCYP72As, AeCSLMs, and AeUGT73s, which function as tailoring enzymes of oleanane-type saponins and aralosides. More than 13 aralosides are de novo synthesized in Saccharomyces cerevisiae by overexpression of these genes in combination. This study sheds light on the diversity of saponins biosynthetic pathway in Araliaceae and will facilitate heterologous bioproduction of aralosides.

A reciprocating magnetic field assisted on-line solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry determination of trace tetracyclines in water.

A reciprocating magnetic-field-assisted on-line solid-phase extraction (RMF-SPE) method coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed for continuous enrichment of trace chemicals in water samples. Under the assist of the reciprocating magnetic field, carboxyl-modified magnetic nanoparticles (CMNPs) were applied to prepare microcolumn with even dispersion by periodical motion, instead of traditional compaction as extraction sorbents. When water sample passed through the extraction region, dynamic sorbents generates an advantage of countless contacts between sorbents and targets without blocking for high efficient extraction. In this study, the on-line RMF-SPE method was established and evaluated by determination of tetracyclines (TCs) from water samples as analysis models, including oxytetracycline, tetracycline, demeclocycline, metacycline, chlortetracycline, and doxycycline. Experimental conditions have been investigated such as flow rate, reciprocating speed, elution time, and so on. The method showed high relative recovery (95.4-111.1%) and good repeatability with RSD from 2.9 to 11.8% for the 200 mL water sample. The linearity range, limits of detection (LODs), and limits of quantification (LOQs) were 0.5-200 µg L-1 (chlortetracycline) and 0.1-200 µg L-1 (other TCs), 12.0-74.1 ng L-1, and 40.1-247 ng L-1, respectively. More importantly, the high enrichment factors in a range of 204 (chlortetracycline) to 276 (demeclocycline) indicate that a small amount of dynamic sorbents (only 10 mg) give full play to extraction attributing to the reciprocating movement, especially for trace analysis and continuous extraction, which is significant for water samples from sea, river and domestic waste.

Vacancy and phonon dispersion properties of Be, Co, Hf, Mg, and Re by modified embedded atom method potentials.

The modified embedded atom method (MEAM) potentials improved by Jin et al. (Appl. Phys. A120 (2015), p. 189) were applied to calculate the mono- and bi-vacancy properties as well as the phonon dispersions for hexagonal close-packed (HCP) metals Be, Co, Hf, Mg, and Re. We expressed the formulas for calculating the mono- and bi-vacancy properties by the molecular static (MS) method based on the MEAM potentials for HCP metals. The lattice dynamics (LD) method and the MEAM potentials were adopted to calculate the phonon dispersion properties. The calculation results show better agreement with the experimental data than the previous calculations by using the unimproved embedded atom model.

Formation enthalpies and dilute heats of HCP-HCP disordered binary alloys: modified ones of embedded atom method potentials.

The formation enthalpies and the dilute heats of HCP-HCP disordered binary alloys were evaluated by employing the improved ones of the modified analytic embedded atom method (EAM) potentials for HCP metals. We calculated the formation enthalpies according to the concentration of alloy elements for 36 kinds of HCP-HCP disordered binary alloys by using the modified ones of embedded atom method potentials for HCP metals proposed by Jin et al. (Appl. Phys. A120, 2015, 189), Johnson's alloy potential model, and Vegard's law. We derived the formulas to calculate the dilute heats of HCP-HCP binary alloys and evaluated the dilute heats for 56 kinds of HCP-HCP disordered binary alloys. The present results of the formation enthalpies and the dilute heats for HCP-HCP binary alloys are basically consistent with the experimental data, the first principle calculations, and the calculations by Miedema theory. Our results agree with the available experimental results better than the modified analytic EAM calculation results.

Simultaneous determination of multiple phytohormones in tomato by ionic liquid-functionalized carbon fibers-based solid-phase microextraction coupled with liquid chromatography-mass spectrometry.

Phytohormones are interrelated by synergistic or antagonistic crosstalk and play important roles in the regulation of plant growth and development. In order to understand the interaction between phytohormones in the plant physiological network, it is necessary to determine trace levels of multiple phytohormones simultaneously in a complex matrix. Here, we synthesized ionic liquids containing different functional groups and modified the surface of carbon fibers with them. Based on these carbon fibers-ionic liquid (CFs-IL) materials, a solid phase microextraction method was developed to enable the simultaneous extraction of phytohormones. The adsorption specificity of multiple phytohormones was studied by identifying the hydrophobic, electrostatic, and π-π interactions, as well as hydrogen bonds, which favor simultaneous extraction of the relevant acidic, alkaline and neutral phytohormones by improving compatibility. The proposed method, coupled with liquid chromatography-tandem mass spectrometry, was applied to the simultaneous determination of 13 acidic, alkaline and neutral phytohormones in tomato. The limits of quantification were found to be in the range of 0.32-54.05 ng mL-1 and 4.6-185.8 pg mL-1, respectively, when measured by QQQ and Q-TOF. All of the relative recoveries were in the range of 94.40-113.37% with RSDs ≤15.36% (n = 3) for spiked tomato samples. This method is expected to be widely applied to multiple phytohormones analysis for in-depth researches concerning the physiological networks of plants.

Open-tubular radially cyclical electric field-flow fractionation (OTR-CyElFFF): an online concentric distribution strategy for simultaneous separation of microparticles.

An open-tubular radially cyclical electric field-flow fractionation technique which achieves the online separation of microparticles in a functional annular channel is proposed in this study. The system was set up by using a stainless steel tube and a platinum wire modified with ionic liquid/mesoporous silica materials as the external and internal electrodes. The feasibility for online separation of various particles was experimentally demonstrated. Particles in the channel were affected by a radial electric field and field-flow fractionation (FFF). On the cross section, different particles showed distinctive migration distances depending on their own properties and the different magnitudes of forces being exerted. The same kind of particles form an annular distribution within the same annulus while different particles form annular distributions at varied concentric annuli through electrophoresis. Under a laminar flow of FFF, different sizes of particles formed a conical arrangement within the annular separation channel. With the joint influence of electric field and flow field, different trajectories were obtained and the particles were eventually separated. Voltage, frequency and duty cycle value are the main parameters affecting the separation of particles. By adjusting these parameters, particles migrate in a zigzag trajectory on one side of the electrodes (mode I) and reach both sides of the electrodes (mode II). Six polystyrene particles were completely separated with high resolution within several minutes. Our system offers numerous advantages of label-free, high-resolution and online separation without tedious operations, and it is a promising tool for the effective separation of various micro-objects.