Pyruvate-dependent growth of Methanosarcina acetivorans.

Methanogenesis is a key step during anaerobic biomass degradation. Methanogenic archaea (methanogens) are the only organisms coupling methanogenic substrate conversion to energy conservation. The range of substrates utilized by methanogens is limited, with acetate and H2+CO2 being the ecologically most relevant. The only single methanogenic energy substrate containing more carbon-carbon bonds than acetate is pyruvate. Only the aggregate-forming, freshwater methanogen Methanosarcina barkeri Fusaro was shown to grow on this compound. Here, the pyruvate-utilizing capabilities of the single-celled, marine Methanosarcina acetivorans were addressed. Robust pyruvate-dependent, methanogenic, growth could be established by omitting CO2 from the growth medium. Growth rates which were independent of the pyruvate concentration indicated that M. acetivorans actively translocates pyruvate across the cytoplasmic membrane. When 2-bromoethanesulfonate (BES) inhibited methanogenesis to more than 99%, pyruvate-dependent growth was acetogenic and sustained. However, when methanogenesis was completely inhibited M. acetivorans did not grow on pyruvate. Analysis of metabolites showed that acetogenesis is used by BES-inhibited M. acetivorans as a sink for electrons derived from pyruvate oxidation and that other, thus far unidentified, metabolites are produced.IMPORTANCEThe known range of methanogenic growth substrates is very limited and M. acetivorans is only the second methanogenic species for which growth on pyruvate is demonstrated. Besides some commonalities, analysis of M. acetivorans highlights differences in pyruvate metabolism among Methanosarcina species. The observation that M. acetivorans probably imports pyruvate actively indicates that the capabilities for heterotrophic catabolism in methanogens may be underestimated. The mostly acetogenic growth of M. acetivorans on pyruvate with concomitant inhibition of methanogenesis confirms that energy conservation of methanogenic archaea can be independent of methane formation.

Retrospective evaluation of percutaneous 3D-navigated screw fixation for fragility fractures of the sacrum: technical notes and four-year experience.

The incidence of fragility fractures of the sacrum is increasing due to demographic changes. In this study, we introduce the 3D-navigated monoportal percutaneous sacroiliac screw fixation (PSS) as a technical advancement for treating fragility fractures of the sacrum. We included all patients who underwent the 3D-navigated monoportal PSS for fragility fractures of the sacrum. The fractures were classified using the Fragility Fractures of the Pelvis score (FFP). We provide a step-by-step illustration of the surgical technique. The objective of this study was to assess the feasibility and safety of the investigated technique. Forty-six patients (36 female, 10 male) with a median age of 81.5 years were included in the study. The fracture classification revealed 23 FFP2 (50%), 5 FFP3 (11%), and 18 FFP4 (39%) fractures. In 35 cases (76%), only transsacral screws were implanted in S1 and S2, with an average incision-to-suture time of 52.6 min. The remaining eleven patients underwent additional anterior pelvic ring fixation, lumbar instrumentation, or kyphoplasty. There were no instances of nerve root, vascular, or pelvic organ injuries. The median postoperative in-hospital stay was six days. Out of the 36 patients who were followed up, four patients required revision surgery due to screw loosening. No significant risk factor for screw loosening was identified in the multiple regression analysis. The presented monoportal PSS technique for fragility fractures of the sacrum is a promising minimally invasive approach with a low complication rate and excellent short-term outcomes.

[Spinal navigation with preoperative computed tomography]. / Navigation an der Wirbelsäule mit präoperativer Computertomographie.

OBJECTIVE: Safe placement of posterior cervical-sacral pedicle screws, S2-Ala-iliac screws, iliac screws, transarticular screws C1/2, translaminar screws C2 or cervical lateral mass screws under the guidance of spinal navigation. INDICATIONS: All posterior spinal instrumentations with screws: instabilities and deformities of rheumatic, traumatic, neoplastic, infectious, iatrogenic or congenital origin; multilevel cervical spinal stenosis with degenerative instability or kyphosis of the affected spinal segment. CONTRAINDICATIONS: There are no absolute contraindications for spinal navigation. SURGICAL TECHNIQUE: Cervical spine: Prone position on a gel mattress, rigid head fixation, e.g., with Mayfield tongs; if appropriate, closed reduction under lateral image intensification; thoracic + lumbar spine: prone position on a cushioned frame; midline posterior surgical approach at the level of the segments to be instrumented; if necessary, open reduction; insertion of the cervical/upper thoracic screws under the guidance of spinal navigation; if necessary, posterior decompression; instrumentation longitudinal rods; if fusion is to be obtained, decortication of the posterior bone elements with a high-speed burr and onlay of cancellous bone or bone substitutes. POSTOPERATIVE MANAGEMENT: In stable instrumentations, no postoperative immobilization with orthosis is necessary, removal of drains (if used) 2-3 days postoperatively (postop), removal of the sutures 14 days postop, clinical and x­ray controls 3 and 12 months postop or in case of clinical or neurological deterioration. RESULTS: Numerous studies showed that the use of spinal navigation significantly reduces implant malplacement rates, complications, and revision surgery. Furthermore, intraoperative radiation exposure to the operation team can be reduced by up to 90%.

Selective activation of four quasi-equivalent C-H bonds yields N-doped graphene nanoribbons with partial corannulene motifs.

Selective C-H bond activation is one of the most challenging topics for organic reactions. The difficulties arise not only from the high C-H bond dissociation enthalpies but also the existence of multiple equivalent/quasi-equivalent reaction sites in organic molecules. Here, we successfully achieve the selective activation of four quasi-equivalent C-H bonds in a specially designed nitrogen-containing polycyclic hydrocarbon (N-PH). Density functional theory calculations reveal that the adsorption of N-PH on Ag(100) differentiates the activity of the four ortho C(sp3) atoms in the N-heterocycles into two groups, suggesting a selective dehydrogenation, which is demonstrated by sequential-annealing experiments of N-PH/Ag(100). Further annealing leads to the formation of N-doped graphene nanoribbons with partial corannulene motifs, realized by the C-H bond activation process. Our work provides a route of designing precursor molecules with ortho C(sp3) atom in an N-heterocycle to realize surface-induced selective dehydrogenation in quasi-equivalent sites.

Vinylene-Linked 2D Conjugated Covalent Organic Frameworks by Wittig Reactions.

Vinylene-linked two-dimensional covalent organic frameworks (V-2D-COFs) have shown great promise in electronics and optoelectronics. However, only a few reactions for V-2D-COFs have been developed hitherto. Besides the kinetically low reversibility of C=C bond formation, another underlying issue facing the synthesis of V-2D-COFs is the attainment of high (E)-alkene selectivity to ensure the appropriate symmetry of 2D frameworks. Here, we tailor the E/Z selectivity of the Wittig reaction by employing a proper catalyst (i.e., Cs2 CO3 ) to obtain more stable intermediates and elevating the temperature across the reaction barrier. Subsequently, the Wittig reaction is innovatively utilized for the synthesis of four crystalline V-2D-COFs by combining aldehydes and ylides. Importantly, the efficient conjugation and decent crystallinity of the resultant V-2D-COFs are demonstrated by their high charge carrier mobilities over 10 cm2  V-1 s-1 , as revealed by non-contact terahertz (THz) spectroscopy.

Intraoperative imaging and navigated spinopelvic instrumentation: S2-alar-iliac screws combined with tricortical S1 pedicle screw fixation.

PURPOSE: The present study aimed to assess the feasibility, safety and accuracy of navigated spinopelvic fixation with focus on S2-alar-iliac screws (S2AIS) and tricortical S1 pedicle screw implantation with the use of high-resolution three-dimensional intraoperative imaging and real-time spinal navigation. METHODS: Patients undergoing navigated intraoperative CT-based spinopelvic stabilization between January 2016 and September 2019 were included. Pelvic fixation was achieved by implantation of S2AIS or iliac screws (IS). S1 screws were implanted with the goal of achieving tricortical purchase. In all cases, instrumentation was performed with real-time spinal navigation and intraoperative screw positioning was assessed using intraoperative computed tomography (iCT), cone-beam CT (CBCT) and robotic cone-beam CT (rCBCT). Screw accuracy was evaluated based on radiographic criteria. To identify predictors of complications, univariate analysis was performed. RESULTS: Overall, 52 patients (85%) received S2AIS and nine patients (15%) received IS instrumentation. Intraoperative imaging and spinal navigation were performed with iCT in 34 patients, CBCT in 21 patients and rCBCT in six patients. A total number of 10/128 (7.8%) iliac screws underwent successful intraoperative correction due to misalignment. Tricortical purchase was successfully accomplished in 58/110 (53%) of the S1 screws with a clear learning curve in the course of time. S2AIS implantation was associated with significantly fewer surgical side infection-associated surgeries. CONCLUSIONS: Real-time navigation facilitated spinopelvic instrumentation with increasing accuracy of S2AIS and tricortical S1 screws. Intraoperative imaging by iCT, CBCT or rCBCT permitted screw assessment with the chance of direct navigated revision of misplaced iliac screws to avoid secondary screw revision surgery.

Combination of Knoevenagel Polycondensation and Water-Assisted Dynamic Michael-Addition-Elimination for the Synthesis of Vinylene-Linked 2D Covalent Organic Frameworks.

Vinylene-linked two-dimensional conjugated covalent organic frameworks (V-2D-COFs), belonging to the class of two-dimensional conjugated polymers, have attracted increasing attention due to their extended π-conjugation over the 2D backbones associated with high chemical stability. The Knoevenagel polycondensation has been demonstrated as a robust synthetic method to provide cyano (CN)-substituted V-2D-COFs with unique optoelectronic, magnetic, and redox properties. Despite the successful synthesis, it remains elusive for the relevant polymerization mechanism, which leads to relatively low crystallinity and poor reproducibility. In this work, we demonstrate the novel synthesis of CN-substituted V-2D-COFs via the combination of Knoevenagel polycondensation and water-assisted dynamic Michael-addition-elimination, abbreviated as KMAE polymerization. The existence of C=C bond exchange between two diphenylacrylonitriles (M1 and M6) is firstly confirmed via in situ high-temperature NMR spectroscopy study of model reactions. Notably, the intermediate M4 synthesized via Michael-addition can proceed the Michael-elimination quantitatively, leading to an efficient C=C bond exchange, unambiguously confirming the dynamic nature of Michael-addition-elimination. Furthermore, the addition of water can significantly promote the reaction rate of Michael-addition-elimination for highly efficient C=C bond exchange within 5 mins. As a result, the KMAE polymerization provides a highly efficient strategy for the synthesis of CN-substituted V-2D-COFs with high crystallinity, as demonstrated by four examples of V-2D-COF-TFPB-PDAN, V-2D-COF-TFPT-PDAN, V-2D-COF-TFPB-BDAN, and V-2D-COF-HATN-BDAN, based on the simulated and experimental powder X-ray diffraction (PXRD) patterns as well as N2 -adsorption-desorption measurements. Moreover, high-resolution transmission electron microscopy (HR-TEM) analysis shows crystalline domain sizes ranging from 20 to 100 nm for the newly synthesized V-2D-COFs.

Control of Crystallinity of Vinylene-Linked Two-Dimensional Conjugated Polymers by Rational Monomer Design.

The interest in two-dimensional conjugated polymers (2D CPs) has increased significantly in recent years. In particular, vinylene-linked 2D CPs with fully in-plane sp2 -carbon-conjugated structures, high thermal and chemical stability, have become the focus of attention. Although the Horner-Wadsworth-Emmons (HWE) reaction has been recently demonstrated in synthesizing vinylene-linked 2D CPs, it remains largely unexplored due to the challenge in synthesis. In this work, we reveal the control of crystallinity of 2D CPs during the solvothermal synthesis of 2D-poly(phenylene-quinoxaline-vinylene)s (2D-PPQVs) and 2D-poly(phenylene-vinylene)s through the HWE polycondensation. The employment of fluorinated phosphonates and rigid aldehyde building blocks is demonstrated as crucial factors in enhancing the crystallinity of the obtained 2D CPs. Density functional theory (DFT) calculations reveal the critical role of the fluorinated phosphonate in enhancing the reversibility of the (semi)reversible C-C single bond formation.

Comparison of radiation exposure and surgery time between an intraoperative CT with automatic surface registration and a preoperative CT with manual surface registration in navigated spinal surgeries.

PURPOSE: This retrospective matched case-control study was conducted to compare two CT based surgery techniques for navigated screw placement in spinal surgery, whether a reduction of radiation exposure and surgery time could be achieved. METHODS: We matched cases treated with an intraoperative CT (iCT), regarding the type and number of implants, with cases treated with a preoperative CT (pCT) of one main surgeon. Outcome measures were radiation exposure due to intraoperative control x-rays, radiation exposure due to CT images, and the duration of surgery. RESULTS: The required radiation exposure could be significantly reduced in the iCT group. For the intraoperative control X-rays by 69% (median (MED) 88.50/standard deviation (SD) 107.84 and MED 286.00/SD 485.04 for iCT and pCT respectively-in Gycm2; p < 0.001) and for the CT examinations by 25% (MED 317.00/SD 158.62 and MED 424.50/SD 225.04 for iCT and pCT respectively-in mGycm; p < 0.001) with no significant change in surgery time. The correlation between the number of segments fused and the necessary surgery time decreased significantly for the iCT group (Pearson product-moment-correlation: r = 0.569 and r = 0.804 for iCT and pCT respectively; p < 0.05). CONCLUSION: The results show that spinal navigation using an intraoperative CT with automatic registration compared to a preoperative CT and intraoperative manual surface registration, allows a significant reduction of radiation exposure, without prolonged surgery time. A significant benefit regarding cut-to-suture-time can be gained with surgeries of a larger scale.

On-Surface Formation of Cyano-Vinylene Linked Chains by Knoevenagel Condensation.

The rapid development of on-surface synthesis provides a unique approach toward the formation of carbon-based nanostructures with designed properties. Herein, we present the on-surface formation of CN-substituted phenylene vinylene chains on the Au(111) surface, thermally induced by annealing the substrate stepwise at temperatures between 220 °C and 240 °C. The reaction is investigated by scanning tunneling microscopy and density functional theory. Supported by the calculated reaction pathway, we assign the observed chain formation to a Knoevenagel condensation between an aldehyde and a methylene nitrile substituent.

Thiophene-Bridged Donor-Acceptor sp2 -Carbon-Linked 2D Conjugated Polymers as Photocathodes for Water Reduction.

Photoelectrochemical (PEC) water reduction, converting solar energy into environmentally friendly hydrogen fuel, requires delicate design and synthesis of semiconductors with appropriate bandgaps, suitable energy levels of the frontier orbitals, and high intrinsic charge mobility. In this work, the synthesis of a novel bithiophene-bridged donor-acceptor-based 2D sp2 -carbon-linked conjugated polymer (2D CCP) is demonstrated. The Knoevenagel polymerization between the electron-accepting building block 2,3,8,9,14,15-hexa(4-formylphenyl) diquinoxalino[2,3-a:2',3'-c]phenazine (HATN-6CHO) and the first electron-donating linker 2,2'-([2,2'-bithiophene]-5,5'-diyl)diacetonitrile (ThDAN) provides the 2D CCP-HATNThDAN (2D CCP-Th). Compared with the corresponding biphenyl-bridged 2D CCP-HATN-BDAN (2D CCP-BD), the bithiophene-based 2D CCP-Th exhibits a wide light-harvesting range (up to 674 nm), a optical energy gap (2.04 eV), and highest energy occupied molecular orbital-lowest unoccupied molecular orbital distributions for facilitated charge transfer, which make 2D CCP-Th a promising candidate for PEC water reduction. As a result, 2D CCP-Th presents a superb H2 -evolution photocurrent density up to ≈7.9 µA cm-2 at 0 V versus reversible hydrogen electrode, which is superior to the reported 2D covalent organic frameworks and most carbon nitride materials (0.09-6.0 µA cm-2 ). Density functional theory calculations identify the thiophene units and cyano substituents at the vinylene linkage as active sites for the evolution of H2 .

Synthesis of Vinylene-Linked Two-Dimensional Conjugated Polymers via the Horner-Wadsworth-Emmons Reaction.

In this work, we demonstrate the first synthesis of vinylene-linked 2D CPs, namely, 2D poly(phenylenequinoxalinevinylene)s 2D-PPQV1 and 2D-PPQV2, via the Horner-Wadsworth-Emmons (HWE) reaction of C2 -symmetric 1,4-bis(diethylphosphonomethyl)benzene or 4,4'-bis(diethylphosphonomethyl)biphenyl with C3 -symmetric 2,3,8,9,14,15-hexa(4-formylphenyl)diquinoxalino[2,3-a:2',3'-c]phenazine as monomers. Density functional theory (DFT) simulations unveil the crucial role of the initial reversible C-C single bond formation for the synthesis of crystalline 2D CPs. Powder X-ray diffraction (PXRD) studies and nitrogen adsorption-desorption measurements demonstrate the formation of proclaimed crystalline, dual-pore structures with surface areas of up to 440 m2 g-1 . More importantly, the optoelectronic properties of the obtained 2D-PPQV1 (Eg =2.2 eV) and 2D-PPQV2 (Eg =2.2 eV) are compared with those of cyano-vinylene-linked 2D-CN-PPQV1 (Eg =2.4 eV) produced by the Knoevenagel reaction and imine-linked 2D COF analog (2D-C=N-PPQV1, Eg =2.3 eV), unambiguously proving the superior conjugation of the vinylene-linked 2D CPs using the HWE reaction.

Author Correction: Polycyclic aromatic chains on metals and insulating layers by repetitive [3+2] cycloadditions.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Force-Activated Isomerization of a Single Molecule.

Understanding and controlling isomerization at the single molecular level should provide new insight into the molecular dynamics and design guidelines of functional devices. Scanning tunneling microscopy (STM) has been demonstrated to be a powerful tool to study isomerization of single molecules on a substrate, by either electric field or inelastic electron tunneling mechanisms. A similar molecular isomerization process can in principle be induced by mechanical force; however, relevant study has remained elusive. Here, we demonstrate that isomerization of a N,N-dimethylamino-dianthryl-benzene molecule on Ag(100) can be mechanically driven by the STM tip. The existence of an out-of-plane dimethylamino group in the molecule is found to play a pivotal role in the isomerization process by providing a steric hindrance effect for asymmetric interaction between the STM tip and the molecule. This underlying mechanism is further confirmed by performing molecular dynamics simulations, which show agreement with experimental results. Our work opens the opportunity to manipulate the molecular configuration on the basis of mechanical force.

Polycyclic aromatic chains on metals and insulating layers by repetitive [3+2] cycloadditions.

The vast potential of organic materials for electronic, optoelectronic and spintronic devices entails substantial interest in the fabrication of π-conjugated systems with tailored functionality directly at insulating interfaces. On-surface fabrication of such materials on non-metal surfaces remains to be demonstrated with high yield and selectivity. Here we present the synthesis of polyaromatic chains on metallic substrates, insulating layers, and in the solid state. Scanning probe microscopy shows the formation of azaullazine repeating units on Au(111), Ag(111), and h-BN/Cu(111), stemming from intermolecular homo-coupling via cycloaddition reactions of CN-substituted polycyclic aromatic azomethine ylide (PAMY) intermediates followed by subsequent dehydrogenation. Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry demonstrates that the reaction also takes place in the solid state in the absence of any catalyst. Such intermolecular cycloaddition reactions are promising methods for direct synthesis of regioregular polyaromatic polymers on arbitrary insulating surfaces.

Degenerative Cervical Myelopathy: A 7-Letter Coding System That Supports Decision-Making for the Surgical Approach.

OBJECTIVE: To validate with a prospective study a decision-supporting coding system for the surgical approach for multilevel degenerative cervical myelopathy. METHODS: Ten cases were presented on an internet platform, including clinical and imaging data. A single-approach (G1), a choice between 2 (G2), or 3 approaches (G3) were options. Senior and junior spine surgeons analyzed 7 parameters: location and extension of the compression of the spinal cord, C-spine alignment and instability, general morbidity and bone diseases, and K-line and multilevel corpectomy. For each parameter, an anterior, posterior, or combined approach was suggested. The most frequent letter or the last letter (if C) of the resulting 7-letter code (7LC) suggested the surgical approach. Each surgeon performed 2 reads per case within 8 weeks. RESULTS: G1: Interrater reliability between junior surgeons improved from the first read (κ = 0.40) to the second (κ = 0.76, p < 0.001) but did not change between senior surgeons (κ = 0.85). The intrarater reliability was similar for junior (κ = 0.78) and senior (κ = 0.71) surgeons. G2: Junior/senior surgeons agreed completely (58%/62%), partially (24%/23%), or did not agree (18%/15%) with the 7LC choice. G3: junior/senior surgeons agreed completely (50%/50%) or partially (50%/50%) with the 7LC choice. CONCLUSION: The 7LC showed good overall reliability. Junior surgeons went through a learning curve and converged to senior surgeons in the second read. The 7LC helps less experienced surgeons to analyze, in a structured manner, the relevant clinical and imaging parameters influencing the choice of the surgical approach, rather than simply pointing out the only correct one.

The Bacillus subtilis endospore crust: protein interaction network, architecture and glycosylation state of a potential glycoprotein layer.

The endospore of Bacillus subtilis is formed intracellularly upon nutrient starvation and is encased by proteinaceous shells. The outermost layer, the crust, is a postulated glycoprotein layer that is composed of six proteins: CotV, W, X, Y, Z and CgeA. Despite some insight into protein interactions and the identification of players in glycosylation, a clear picture of its architecture is still missing. Here, we report a comprehensive mutational analysis that confirms CotZ as the anchor of the crust, while the crust structure is provided by CotV, CotX and CotY. CotY seems to be the major structural component, while CotV and CotX are polar and co-depend on each other and partially on CotW. CotW is independent of other crust proteins, instead depending on outer coat proteins, indicating a role at the interface of crust and coat. CgeA is co-expressed with putative glycosyltransferases (CgeB and CgeD) and implicated in crust glycosylation. In accordance, we provide evidence that CgeB, CgeCDE, SpsA-L, SpsM and SpsNOPQR (formerly YfnHGFED) contribute to the glycosylation state of the spore. The crust polysaccharide layer consists of functionally linked rhamnose- and galactose-related variants and could contain rare sugars. It may therefore protect the crust against biological degradation and scavenging.

On-surface synthesis of nitrogen-doped nanographenes with 5-7 membered rings.

We report on the formation of nitrogen-doped nanographenes containing five- and seven-membered rings by thermally induced cyclodehydrogenation on the Au(111) surface. Using scanning tunneling microscopy and supported by calculations, we investigated the structure of the precursor and targets, as well as of intermediates. Scanning tunneling spectroscopy shows that the electronic properties of the target nanographenes are strongly influenced by the additional formation of non-hexagonal rings.

Azaarene Dimers.

Binaphthyl-3,3',4,4'-tetraone was prepared and coupled to different bis(TIPS-ethynyl)-substituted (TIPS=triisopropyl silane) aromatic diamines, resulting in the formation of dimeric benzo-fused azaacenes, centrally connected by a single bond. The two halves of the molecules are highly twisted with respect to each other and showed limited electronic interaction in the ground state because their absorption spectra remained very similar to those of the constituting monomers. The dimers displayed greatly reduced fluorescence when compared to the monomers, suggesting that there is a significant interaction of the two azarene units in the excited state. Preliminary investigations showed that the dimers are attractive for application as acceptors in organic photovoltaic because they significantly outperform their monomeric counterparts.

Polycyclic Aromatic Hydrocarbons Containing A Pyrrolopyridazine Core.

Polycyclic aromatic azomethine ylides (PAMYs) are versatile building blocks for the bottom-up construction of unprecedented nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs). Here, we demonstrate the 1,3-dipolar cycloaddition between PAMY and 1,4-diphenylbut-2-yne-1,4-dione and the subsequent condensation reaction with hydrazine, which led to unique N-PAHs with a phenyl-substituted pyrrolopyridazine core (PP-1 and PP-2). The molecular structures of pristine PP-1 and tert-butyl-substituted PP-2 were verified by NMR spectroscopy and mass spectrometry. Moreover, the structure of PP-2 was unambiguously elucidated by X-ray single crystal analysis. The optoelectronic properties were investigated by solvent-dependent UV-Vis absorption and fluorescence emission spectroscopy as well as cyclic voltammetry. Additionally, density functional theory (DFT) calculations showed that PP-1 and PP-2 exhibit push-pull behavior. Furthermore, in situ EPR/UV-Vis-NIR spectroelectrochemistry allowed the detailed insight into the spectroscopic properties and spin distribution of radical cation species of PP-2.