Arthroscopic Anatomic Reconstruction of the Anterior Talofibular and Calcaneofibular Ligaments Through a 2-Portal Technique.

Arthroscopic anatomic lateral ligament reconstruction of the ankle joint has proven to be a safe option in the treatment of chronic ankle instability (CAI), with good functional results as well as allowing simultaneous management of associated lesions. We described an arthroscopic technique for anatomic reconstruction of the anterior talofibular ligament and calcaneofibular ligament using only 2 arthroscopic portals. This surgical technique to treat CAI is technically less demanding than other described techniques that use 3 or 4 arthroscopic portals. Moreover, as an anatomic technique, it has the advantage of preserving the biomechanics and kinematics of the ankle joint.

Comparison of Direct Repair Versus Anatomic Graft Reconstruction of the Anterior Talofibular Ligament: A Biomechanical Cadaveric Study.

The goal of our study is to compare the stability of the anatomic reconstruction of the anterior talofibular ligament (ATFL) with direct repair of the ATFL, in a cadaver model. We performed the following techniques in 18 cadaveric ankles: the intact ATFL was cut, after which a direct repair using 2 anchors was performed. The repair was sectioned, and anatomic reconstruction was then performed with a tendon autograft. We measured angular displacement in 3 anatomic planes (axial, coronal, sagittal) for each situation in response to the anterior drawer test (ADT), talar tilt test (TTT) and pivot test (PT), using a specifically constructed arthrometer. The sectioned ATFL was inferior to the intact ATFL in the axial plane with the ADT (p = .012), in the axial plane with the PT (p = .001) and in the axial and coronal planes with the TTT (p = .013 and p = .016, respectively). Direct anatomic repair was inferior to the intact ATFL in the axial plane upon the PT (p = .009). No differences could be found between anatomic graft reconstructions and the intact ATFL with any manoeuver, nor when comparing anatomic graft reconstruction and direct repair with 2 anchors. We were able to conclude that anatomic graft reconstruction of the ATFL reproduces angular stability of the native ligament in a cadaver model. While we could not detect if anatomic graft reconstruction was superior to direct repair, the latter proved to be less stable in the axial plane upon internal rotation (pivot test) versus the intact ATFL.

Results of Anatomical Arthroscopic Repair of Anterior Talofibular Ligament in Chronic Lateral Ankle Instability Patients.

BACKGROUND: To assess the clinical and functional outcomes of all-inside arthroscopic anatomical repair of anterior talofibular ligament (ATFL) for management of chronic lateral ankle instability (CLAI) in a considerable number of patients during medium-term follow-up. METHODS: A retrospective analytic study was performed on 100 patients with CLAI who presented between August 2015 and July 2020 (average age: 32.9 years; range: 16-54 years). All-inside arthroscopic ATFL direct repair was performed in all patients through 2 portals only with fixation using 2 knotless anchors. Associated intraarticular lesions were treated in the same procedure. Outcomes were assessed with pre- and postoperative visual analog scale (VAS), the ankle-hindfoot score of the American Orthopaedic Foot & Ankle Society (AOFAS), and the Karlsson Ankle Functional Score (KAFS). RESULTS: All patients were followed for 24-48 months. At the final follow-up, ankle pain had improved significantly. Both the ankle anterior drawer test and the ankle varus stress tests were negative. There was no loss of ankle range of motion compared with preoperative measures, and all patients returned to normal gait. The mean VAS score decreased to 0.39 ± 0.63, the AOFAS score increased to 95.17 ± 4.7, and the KAFS score increased to 95 ± 4.07. All the follow-up indexes significantly improved compared to those before surgery. CONCLUSION: At minimum 24-month follow-up, the all-inside arthroscopic ATFL repair used to treat CLAI was found to restore ankle stability and yield good clinical outcomes with a relatively low complication rate. LEVEL OF EVIDENCE: Level III, retrospective cohort study.

Reconstruction of the interosseous talocalcaneal ligament using allograft for subtalar joint stabilization is effective.

PURPOSE: The aim of this study was to assess the biomechanical effects of subtalar ligament injury and reconstruction on stability of the subtalar joint in all three spatial planes. METHODS: Fifteen fresh frozen cadaveric legs were used, with transfixed tibiotalar joints to isolate motion to the subtalar joint. An arthrometer fixed to the lateral aspect of the calcaneus measured angular displacement in all three spatial planes on the inversion and eversion stress tests. Stress manoeuvres were tested with the intact joint, and then repeated after sequentially sectioning the inferior extensor retinaculum (IER), cervical ligament (CL), interosseous talocalcaneal ligament (ITCL), arthroscopic graft reconstruction of the ITCL, and sectioning of the calcaneo-fibular ligament (CFL). RESULTS: Sectioning the ITCL significantly increased angular displacement upon inversion and eversion in the coronal and sagittal planes. Reconstruction of the ITCL significantly improved angular stability against eversion in the axial and sagittal planes, and against inversion in the axial and coronal planes, at the zero time point after reconstruction. After sectioning the CFL, resistance to eversion decreased significantly in all three planes. CONCLUSION: Progressive injury of ligamentous stabilisers, particularly the ITCL, led to increasing angular displacement of the subtalar joint measured with the inversion and eversion stress tests, used in clinical practice. Reconstruction of the ITCL using tendon graft significantly stabilised the subtalar joint in the axial and sagittal planes against eversion and in the axial and coronal planes against inversion, immediately after surgery.

Increased subtalar rotational motion in patients with symptomatic ankle instability under load and stress conditions.

PURPOSE: Differentiating subtalar and ankle instability in the clinical setting is challenging. This study aims to analyze the rotational laxity of the subtalar joint bilaterally in patients with asymptomatic and symptomatic ankle instability under simulated load and stress-induced position of the subtalar joint. METHODS: A case-control study was conducted using an adjustable load device (ALD). Patients with chronic ankle instability and healthy volunteers were included. Each subject underwent a CT scan under mechanical stress and simulated weight-bearing conditions, maintaining maximum eversion and inversion hindfoot positions. The images were obtained in a single model, allowing calculations of the motion vector as well as the helical axis. The helical axis was defined by a rotation angle and a translation distance. RESULTS: A total of 72 feet were included in the study. Thirty-one patients with unilateral symptoms and five healthy controls were selected, defining two groups: symptomatic (n = 31) and asymptomatic (n = 41). An absolute difference of 4.6º (95%CI 2-11.1) rotation angle was found on the helical axis of the symptomatic vs. asymptomatic group (p = 0.001). No significant differences were detected in the translation distance (n.s.) between the groups. Additionally, a significant positive correlation was found between the rotation angle and translation distance through the helical axis in the asymptomatic group (r = 0.397, p = 0.027). CONCLUSION: Patients with chronic ankle instability suspected of having subtalar joint instability showed a wider subtalar range of laxity in terms of rotation about the helical axis. Furthermore, differences in kinematics between symptomatic and asymptomatic hindfeet was demonstrated when both feet were compared. LEVEL OF EVIDENCE: III.

Implant-supported full-arch rehabilitation with immediate loading using two different digital impression techniques: a case report with 2-year follow-up.

Immediate full-arch loading is a highly complex and technique-sensitive procedure. Digital impression techniques aim to replace conventional analog systems to carry out dental treatments in a more predictive, safer, and less time-consuming way. This case report describes a patient with a guarded periodontal prognosis, who was rehabilitated with implant-supported fixed prostheses after full-mouth extractions. Immediate full-arch loading was performed by means of two digital impression systems: photogrammetric technology with PIC dental in the maxillary arch, and MedicalFit in the mandible. Immediate provisional prostheses in acrylic resin (polymethyl methacrylate) were milled and placed within 12 hours after implant placement surgeries. Both provisional structures fitted properly providing adequate esthetics and function. After the implant osseointegration period, final digital impressions were registered, and definitive zirconia full-arch implant-supported prostheses were delivered. The 24-month follow-up did not show biologic or mechanical complications.

Results of Transfibular Total Ankle Arthroplasty. A Series of 50 Implants.

Total ankle arthroplasty has become popular in the last few years. The lateral transfibular approach is an alternative to the traditional anterior approach. The purpose of this study was to evaluate our 50 first and consecutive clinical and radiological outcomes of transfibular total ankle replacements (Trabecular Metal Total AnkleR Zimmer Biomet, Warsaw, IN) with a follow-up of at least 3 years. This retrospective study included 50 patients. The main indication was post-traumatic osteoarthritis (n = 41). The mean age was 59 (range = 39-81). All patients were followed for at least 36 months postoperatively. Patients were assessed with the American Orthopaedic Foot & Ankle Society (AOFAS) Ankle Hindfoot Score and Visual analog scale (VAS) preoperatively and postoperatively. Range of motion and radiological measures were assessed as well. Postoperatively, patients demonstrated statistically significant improvement in the AOFAS score from 32 (range = 14-46) to 80 (range = 60-100) (p < .01) and VAS from 7.8 (range = 6.1-9.7) to 1.3 (range = 0-6) (p < .01). The average total range of motion increased significantly from 19.8° to 29.2° of plantarflexion and 6.8° to 13.5° of dorsiflexion. Alignment measured by alpha, beta, and gamma angles was satisfactorily achieved. No patient demonstrated any radiographic evidence of tibial or talar lucency at the final follow-up. Five patients (10%) experienced delayed wound healing. One patient (2%) developed a postoperative prosthetic infection. One patient (2%) developed fibular pseudoarthrosis and 2 patients (4%) suffered impingement. Two patients (4%) needed surgery for symptomatic fibular hardware. This study found excellent clinical and radiological results of transfibular total ankle replacement. This is a safe and effective option that allows the correction of sagittal and coronal malalignment.

Restoring the functionality of implant-supported prostheses with a reloading technique: A clinical report.

The prevalence of infraocclusion and/or loss of interproximal contact areas with implant-supported restorations is high, and replacement of these prostheses has been advocated for the treatment of mild or moderate infraocclusion; however, replacement is complicated if the manufacturer of the implant is unknown. A technique is presented for correcting the infraocclusion of posterior prostheses that are directly connected to the implant. Advantages include possibly preventing marginal bone loss secondary to the removal and reconnection of the prosthetic attachments and reducing the number of appointments.

Potential of plant secondary metabolite-based polymers to enhance wound healing.

There is a global epidemic of non-healing wounds. Chronic inflammation, overexpression of pro-inflammatory cytokines, oxidative stress and bacterial infection are implicated in delayed wound healing. Natural extracts are a rich source of bioactive molecules called plant secondary metabolites (PSMs) that include terpenes and phenols. These molecules may facilitate wound healing through their antioxidant, anti-inflammatory, and antibacterial activity. After briefly outlining the process of wound healing and how it is compromised in chronic wounds, this review focuses on investigating how PSMs-based polymers may improve wound healing. Best methods for incorporating PSMs into wound dressings are reviewed and critically compared. The exiting body of literature strongly suggests that PSMs-based polymers incorporated into wound dressings could have clinical value in aiding wound healing. STATEMENT OF SIGNIFICANCE: Chronic wounds develop by the persistence of inflammation, oxidative stress and infection. Chronic wounds affect the worldwide population, by reducing quality of life of patients with significant cost to healthcare systems. To help chronic wounds to heal and overcome this burden, materials with anti-inflammatory, antioxidant and antibacterial properties are required. Plant secondary metabolites (PSMs) are volatile materials that have all these properties. PSMs-based polymers can be fabricated by polymerization techniques. The present review provides an overview of the state-of-the-art of the wound healing mechanisms of PSMs. Current developments in the field of PSMs-based polymers are reviewed and their potential use as wound dressings is also covered.

Accuracy of Digital Dental Implants Impression Taking with Intraoral Scanners Compared with Conventional Impression Techniques: A Systematic Review of In Vitro Studies.

The aim of this systematic review was to evaluate the in vitro accuracy of dental implants impressions taken with intraoral scanner compared with impressions taken with conventional techniques. Two independent reviewers conducted a systematic electronic search in the PubMed, Web of Science and Scopus databases. Some of the employed key terms, combined with the help of Boolean operators, were: "dental implants", "impression accuracy", "digital impression" and "conventional impression". Publication dates ranged from the earliest article available until 31 July 2021. A total of 26 articles fulfilled the inclusion criteria: 14 studies simulated complete edentation (CE), nine partial edentation (PE) and only two simulated a single implant (SI); One study simulated both CE and SI. In cases of PE and SI, most of the studies analyzed found greater accuracy with conventional impression (CI), although digital impression (DI) was also considered adequate. For CE the findings were inconclusive as six studies found greater accuracy with DI, five found better accuracy with CI and four found no differences. According to the results of this systematic review, DI is a valid alternative to CI for implants in PE and SI, although CI appear to be more accurate. For CE the findings were inconclusive, so more studies are needed before DI can be recommended for all implant-supported restorations.

Digital Impression Taking for Maxillary Full-Arch Restoration With Immediate Loading: A Case Report.

The aim of this clinical report is to describe a maxillary full-arch implant supported restoration with immediate loading performed by means of an entirely digital work flow with photogrammetric system and intraoral scanning. A female patient with an edentulous maxillary arch attended the dental clinic seeking a maxillary fixed restoration. After treatment planning, 6 implants were placed using a surgical splint fabricated digitally by intraoral scanning of her previous removable prosthesis. Multiunit abutments were fitted, and 2 digital impressions were taken, one with a photogrammetric system for determining implant positions and the other with an intraoral scanner for soft tissue registration. The acrylic resin structure of the immediate prosthesis was milled and placed within 8 hours of implant surgery. This provisional structure fitted correctly and provided adequate esthetics and function. Radiographic and clinical follow-up after 24 months observed adequate implant evolution.

Arthroscopic Flexor Halluces Longus Transfer and Percutaneous Achilles Tendon Repair for Distal Traumatic Ruptures.

The Achilles tendon is the largest and strongest tendon in the human body. It is the tendon that most often suffers injury and accounts for 20% of all tendon ruptures. These types of ruptures often occur 2 to 6 cm proximal to the stumps in an area of reduced vascularity. One such injury, the distal acute Achilles tendon rupture, is quite uncommon. For distal repairs, there have been studies that used a pullout technique, a button technique, and the use of local tendons for open-fashion augmentation. Although percutaneous repair and endoscopic flexor hallucis longus (FHL) tendon transfer techniques have been described for both acute midportion and chronic Achilles tendon rupture repair, there are no studies that describe the use of percutaneous sutures and biological augmentation with FHL transfer as a treatment option for acute distal injuries. The purpose of this Technical Note is to describe a novel approach to repair. It combines arthroscopic FHL tendon transfer with a percutaneous Achilles tendon repair technique for traumatic distal ruptures.

Biomechanical study of autograft anatomic reconstruction in lateral ankle instability. / Estudio biomecánico de la reconstrucción ligamentosa anatómica con autoinjerto en la inestabilidad lateral de tobillo.

INTRODUCTION: The purpose of this work is perform a biomechanical comparison of anatomic reconstruction of the anterior talofibular ligament (ATFL) with the intact ATFL. MATERIALS AND METHODS: We studied 18 fresh cadaveric ankles with intact ATFL. Each specimen was clinically assessed with the anterior drawer (AD) and varus tilt (VT) tests and the angular movement in the three spatial planes (axial, coronal and sagittal) was measured with an arthrometer using a sensor located in the talus. RESULTS: Statistically significant differences were found in the axial plane, between the intact ATFL versus the sectioned ATFL for AD test with p = 0.012, and for VT test with p = 0.013. Regarding the coronal plane, we also observed a statistically significant difference for VT test with p = 0.016. In the sagittal plane, there are no statistically significant differences in both maneuvers. No statistically significant differences were found when comparing the biomechanics of anatomic ligament reconstruction versus the intact ATFL. CONCLUSION: Autograft anatomic reconstruction of the ATFL showed biomechanical properties similar to those of the native ATFL, at the zero moment in a cadaveric model.