Minimizing Interfacial Recombination in 1.8 eV Triple-Halide Perovskites for 27.5% Efficient All-Perovskite Tandems.

All-perovskite tandem solar cells show great potential to enable the highest performance at reasonable costs for a viable market entry in the near future. In particular, wide-bandgap (WBG) perovskites with higher open-circuit voltage (VOC ) are essential to further improve the tandem solar cells' performance. Here, a new 1.8 eV bandgap triple-halide perovskite composition in conjunction with a piperazinium iodide (PI) surface treatment is developed. With structural analysis, it is found that the PI modifies the surface through a reduction of excess lead iodide in the perovskite and additionally penetrates the bulk. Constant light-induced magneto-transport measurements are applied to separately resolve charge carrier properties of electrons and holes. These measurements reveal a reduced deep trap state density, and improved steady-state carrier lifetime (factor 2.6) and diffusion lengths (factor 1.6). As a result, WBG PSCs achieve 1.36 V VOC , reaching 90% of the radiative limit. Combined with a 1.26 eV narrow bandgap (NBG) perovskite with a rubidium iodide additive, this enables a tandem cell with a certified scan efficiency of 27.5%.

Imaging the Terahertz Nanoscale Conductivity of Polycrystalline CsPbBr3 Perovskite Thin Films.

Terahertz (THz) radiation is a valuable tool to investigate the electronic properties of lead halide perovskites (LHPs). However, attaining high-resolution information remains elusive, as the diffraction-limited spatial resolution (∼300 µm) of conventional THz methods prevents a direct analysis of microscopic effects. Here, we employ THz scattering scanning near-field optical microscopy (THz-sSNOM) for nanoscale imaging of cesium lead bromide (CsPbBr3) thin films down to the single grain level at 600 GHz. Adopting a scattering model, we are able to derive the local THz nanoscale conductivity in a contact-free fashion. Increased THz near-field signals at CsPbBr3 grain boundaries complemented by correlative transmission electron microscopy-energy-dispersive X-ray spectroscopy elemental analysis point to the formation of halide vacancies (VBr) and Pb-Pb bonds, which induce charge carrier trapping and can lead to nonradiative recombination. Our study establishes THz-sSNOM as a powerful THz nanoscale analysis platform for thin-film semiconductors such as LHPs.

Physical Origin of Negative Differential Resistance in V3 O5 and Its Application as a Solid-State Oscillator.

Oxides that exhibit an insulator-metal transition can be used to fabricate energy-efficient relaxation oscillators for use in hardware-based neural networks but there are very few oxides with transition temperatures above room temperature. Here the structural, electrical, and thermal properties of V3 O5 thin films and their application as the functional oxide in metal/oxide/metal relaxation oscillators are reported. The V3 O5 devices show electroforming-free volatile threshold switching and negative differential resistance (NDR) with stable (<3% variation) cycle-to-cycle operation. The physical mechanisms underpinning these characteristics are investigated using a combination of electrical measurements, in situ thermal imaging, and device modeling. This shows that conduction is confined to a narrow filamentary path due to self-confinement of the current distribution and that the NDR response is initiated at temperatures well below the insulator-metal transition temperature where it is dominated by the temperature-dependent conductivity of the insulating phase. Finally, the dynamics of individual and coupled V3 O5 -based relaxation oscillators is reported, showing that capacitively coupled devices exhibit rich non-linear dynamics, including frequency and phase synchronization. These results establish V3 O5 as a new functional material for volatile threshold switching and advance the development of robust solid-state neurons for neuromorphic computing.

Automated SEM Image Analysis of the Sphere Diameter, Sphere-Sphere Separation, and Opening Size Distributions of Nanosphere Lithography Masks.

Colloidal nanosphere monolayers­used as a lithography mask for site-controlled material deposition or removal­offer the possibility of cost-effective patterning of large surface areas. In the present study, an automated analysis of scanning electron microscopy (SEM) images is described, which enables the recognition of the individual nanospheres in densely packed monolayers in order to perform a statistical quantification of the sphere size, mask opening size, and sphere-sphere separation distributions. Search algorithms based on Fourier transformation, cross-correlation, multiple-angle intensity profiling, and sphere edge point detection techniques allow for a sphere detection efficiency of at least 99.8%, even in the case of considerable sphere size variations. While the sphere positions and diameters are determined by fitting circles to the spheres edge points, the openings between sphere triples are detected by intensity thresholding. For the analyzed polystyrene sphere monolayers with sphere sizes between 220 and 600 nm and a diameter spread of around 3% coefficients of variation of 6.8­8.1% for the opening size are found. By correlating the mentioned size distributions, it is shown that, in this case, the dominant contribution to the opening size variation stems from nanometer-scale positional variations of the spheres.

Bifacial Color-Tunable Electroluminescent Devices.

Alternate current electroluminescent (ACEL) devices provide a range of interesting properties, such as facile large-area processability, mechanical flexibility, and outstanding resilience, when compared with other large-area light-emitting technologies. To widen the scope of possible applications for ACEL devices, color tunability and white light emission are desirable. Here, we introduce a novel three-terminal device architecture based on two monolithically stacked ACEL devices (e.g., orange and blue) that allows for color tunability via independent operation of the subdevices. The tandem devices comprise semitransparent bottom and top electrodes based on networks of silver nanowires, which endow the tandem ACEL device with bifacial Janus-type emission. We provide a detailed analysis of the sources of optical losses in single and tandem ACEL devices. Our novel device concept enables novel facets of applications for ACEL in signage and lighting.

Band-Gap Tuning in All-Inorganic CsPbxSn1-xBr3 Perovskites.

We investigate all-inorganic perovskite CsPbxSn1-xBr3 thin films to determine the variations in the band gap and electronic structure associated with the Pb/Sn ratio. We observe that the band gap can be tuned between 1.86 eV (x = 0) and 2.37 eV (x = 1). Intriguingly, this change is nonlinear in x, with a bowing parameter of 0.9 eV; furthermore, a slight band gap narrowing is found for low Pb content (minimum x ∼ 0.3). The wide tunability of the band gap makes CsPbxSn1-xBr3 a promising material, e.g., for a wide-gap subcell in tandem applications or for color-tunable light-emitting diodes. Employing photoelectron spectroscopy, we show that the valence band varies with the Pb/Sn ratio, while the conduction band is barely affected.

A carbene stabilized precursor for the spatial atomic layer deposition of copper thin films.

This paper demonstrates a carbene stabilized precursor [Cu(tBuNHC)(hmds)] with suitable volatility, reactivity and thermal stability, that enables the spatial plasma-enhanced atomic layer deposition (APP-ALD) of copper thin films at atmospheric pressure. The resulting conductive and pure copper layers were thoroughly analysed and a comparison of precursor and process with the previously reported silver analogue [Ag(tBuNHC)(hmds)] revealed interesting similarities and notable differences in precursor chemistry and growth characteristics. This first report of APP-ALD grown copper layers is an important starting point for high throughput, low-cost manufacturing of copper films for nano- and optoelectronic devices.

Influence of lens aberrations, specimen thickness and tilt on differential phase contrast STEM images.

Differential phase contrast (DPC) imaging in scanning transmission electron microscopy (STEM) allows for measuring electric and magnetic fields in solids on scales ranging from picometres to micrometres. The DPC technique mainly uses the direct beam, which is deflected by the electric and magnetic fields of the specimen and measured with a beam position sensitive detector. The beam deflection and thus the DPC signal is strongly influenced by specimen thickness, specimen tilt and lens aberrations. Understanding these influences is critical for a solid interpretation and quantification of contrasts in DPC images. To this end, the present study employs DPC-STEM image simulations of SrTiO3 [001] at atomic resolution to analyse the influence of lens aberrations, specimen tilt and thickness and also to give a guideline for the detection of parameters affecting the contrast by performing an analysis of associated scattergrams. Simulations are obtained using the multislice algorithm implemented in the Dr. Probe software with conditions corresponding to a JEOL ARM200F microscope equipped with an octa-segmented annular detector, but results should be similar for other microscopes. Simulations show that due to a non-rigid shift of the detected intensity distribution correct values of projected potentials of specimens thicker than one unit-cell cannot be determined. Regarding the impact of residual lens aberrations, it is found that the shape of the lens aberration phase function determines the symmetry and features in the DPC image. Specimen tilt leads to an elongation of features perpendicular to the tilt axis. The results are confirmed by comparing simulated with experimental DPC images of Si [110] yielding good agreement. Overall, a high sensitivity of DPC-STEM imaging to lens aberrations, specimen tilt and diffraction effects is evidenced.

Nonlinear refraction in CH3NH3PbBr3 single crystals.

We measure both nonlinear absorption and nonlinear refraction in a ${{\rm CH}_3}{{\rm NH}_3}{{\rm PbBr}_3}$CH3NH3PbBr3 single crystal using the Z-scan technique with femtosecond laser pulses. At 1000 nm, we obtain values of 5.2 cm/GW and ${+}{9.5} \cdot {{10}^{ - 14}}\;{{\rm cm}^2}/{\rm W}$+9.5⋅10-14cm2/W for nonlinear absorption and nonlinear refraction, respectively. The sign and magnitude of the observed refractive nonlinearity are reproduced well by the two-band model. Our results suggest that the large nonlinear refractive index measured in perovskite nanostructures cannot be explained by an intrinsically high bound-electronic nonlinear refractive index in this emerging material class but is possibly caused by free carriers or quantum confinement effects.

Sex-Related Differences in Pharmacokinetics and Pharmacodynamics of Frequently Prescribed Drugs: A Review of the Literature.

While there is considerable evidence about sex-related differences between men and women in drug metabolism, efficacy and safety of frequently prescribed drugs such as analgesics, tranquillizers, statins and beta-blockers, clinicians' awareness of the implications on dosing and adverse event monitoring in routine practice is inadequate. Some drugs are more effective in men than women (e.g. ibuprofen) or vice versa (e.g. opioids, benzodiazepine), typically owing to pharmacodynamic causes. The 5-hydroxytryptamine (5-HT) receptor 3 antagonist alosetron is approved for women only since it largely lacks efficacy in men. For statins, equal efficacy was demonstrated in secondary prevention of cardiovascular events, but primary prevention is still under debate. For some drugs (e.g. paracetamol, metoprolol), women are at significantly higher risk of adverse effects. Therefore, considering sex-specific features in clinical trials and therapeutic guidelines is warranted to ensure efficacy and safety of medicines.

Extremely Robust Gas-Quenching Deposition of Halide Perovskites on Top of Hydrophobic Hole Transport Materials for Inverted (p-i-n) Solar Cells by Targeting the Precursor Wetting Issue.

Lead halide perovskite solar cells afford high power conversion efficiencies, even though the photoactive layer is formed in a solution process. At the same time, solution processing may impose some severe dewetting issues, especially if organic, hydrophobic charge transport layers are considered. Ultimately, very narrow processing windows with a relatively large spread in device performance and a considerable lab-to-lab variation result. Here, we unambiguously identify dimethylsulfoxide (DMSO), which is commonly used as a co-solvent and complexing agent, to be the main reason for dewetting of the precursor solution on hydrophobic hole transport layers, such as polytriarylamine, in a gas-quenching-assisted deposition process. In striking contrast, we will show that N-methyl-2-pyrrolidon (NMP), which has a lower hydrophilic-lipophilic-balance, can be favorably used instead of DMSO to strongly mitigate these dewetting issues. The resulting high-quality perovskite layers are extremely tolerant with respect to the mixing ratio (NMP/dimethylformamide) and other process parameters. Thus, our findings afford an outstandingly robust, easy to use, and fail-safe deposition technique, yielding single (MAPbI3) and double (FA0.94Cs0.06PbI3) cation perovskite solar cells with high efficiencies (∼18.5%). Most notably, the statistical variation of the devices is significantly reduced, even if the deposition process is performed by different persons. We foresee that our results will further the reliable preparation of perovskite thin films and mitigate process-to-process variations that still hinder the prospects of upscaling perovskite solar technology.

Room-Temperature Stimulated Emission and Lasing in Recrystallized Cesium Lead Bromide Perovskite Thin Films.

Cesium lead halide perovskites are of interest for light-emitting diodes and lasers. So far, thin-films of CsPbX3 have typically afforded very low photoluminescence quantum yields (PL-QY < 20%) and amplified spontaneous emission (ASE) only at cryogenic temperatures, as defect related nonradiative recombination dominated at room temperature (RT). There is a current belief that, for efficient light emission from lead halide perovskites at RT, the charge carriers/excitons need to be confined on the nanometer scale, like in CsPbX3 nanoparticles (NPs). Here, thin films of cesium lead bromide, which show a high PL-QY of 68% and low-threshold ASE at RT, are presented. As-deposited layers are recrystallized by thermal imprint, which results in continuous films (100% coverage of the substrate), composed of large crystals with micrometer lateral extension. Using these layers, the first cesium lead bromide thin-film distributed feedback and vertical cavity surface emitting lasers with ultralow threshold at RT that do not rely on the use of NPs are demonstrated. It is foreseen that these results will have a broader impact beyond perovskite lasers and will advise a revision of the paradigm that efficient light emission from CsPbX3 perovskites can only be achieved with NPs.

Simultaneous Mapping of Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Halide Perovskite Thin Films: A Novel Nanoscopic Thermal Measurement Technique.

Local thermal conductivity, thermal diffusivity, and volumetric heat capacity of all-inorganic halide perovskite thin films are mapped simultaneously and with highest spatial resolution for the first time. These various thermal properties are detected by a scanning near-field thermal microscope operated at two different frequencies simultaneously. We apply this technique to analyze the thermal properties of halide perovskites on the nanoscale. In addition to an ultralow thermal conductivity of 0.43 ± 0.03 and 0.33 ± 0.02 W/(m·K), a low thermal diffusivity of 0.3 ± 0.1 mm2/s and a small heat capacity of 0.29 ± 0.9 and 0.18 ± 0.6 J/(g·K) are obtained for CsPbBr3 and CsPb2Br5 films, respectively. The findings of our thermal microscopy are of great general importance for the thermal design of thin-film devices based on halide perovskites, while the measurement technique itself is generally applicable for other thin-film optoelectronic materials.

A comparative study demonstrates strong size tunability of carrier-phonon coupling in CdSe-based 2D and 0D nanocrystals.

In a comparative study we investigate the carrier-phonon coupling in CdSe based core-only and hetero 2D as well as 0D nanoparticles. We demonstrate that the coupling can be strongly tuned by the lateral size of nanoplatelets, while, due to the weak lateral confinement, the transition energies are only altered by tens of meV. Our analysis shows that an increase in the lateral platelet area results in a strong decrease in the phonon coupling to acoustic modes due to deformation potential interaction, yielding an exciton deformation potential of 3.0 eV in line with theory. In contrast, coupling to optical modes tends to increase with the platelet area. This cannot be explained by Fröhlich interaction, which is generally dominant in II-VI materials. We compare CdSe/CdS nanoplatelets with their equivalent, spherical CdSe/CdS nanoparticles. Universally, in both systems the introduction of a CdS shell is shown to result in an increase of the average phonon coupling, mainly related to an increase of the coupling to acoustic modes, while the coupling to optical modes is reduced with increasing CdS layer thickness. The demonstrated size and CdS overgrowth tunability has strong implications for applications like tuning carrier cooling and carrier multiplication - relevant for solar energy harvesting applications. Other implications range from transport in nanosystems e.g. for field effect transistors or dephasing control. Our results open up a new toolbox for the design of photonic materials.

Direct Arylation Polycondensation (DAP) Synthesis of Alternating Quaterthiophene-Benzothiadiazole Copolymers for Organic Solar Cell Applications.

Poly[(2,1,3-benzothiadiazole-4,7-diyl)-alt-4',3''-difluoro-3,3'''-di(2-octyldodecyl)-2,2';5',2'';5'',2'''-quaterthiophene-5,5'''-diyl)] (PBTff4T-2OD) and poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-3,3'''-di(2-octyldodecyl)-2,2';5',2'';5'',2'''-quaterthiophene-5,5'''-diyl)] (PffBT4T-2OD) for use as the p-donor component of high-efficiency fullerene-based organic solar cells are usually synthesized in established C-C cross-coupling reactions, preferably using the Stille procedure. This report describes how PBTff4T-2OD and PffBT4T-2OD are generated in a direct arylation polycondensation (DAP) approach with molecular weights up to Mn =19.4 kDa and 21.1 kDa, respectively, and how structural defects in the copolymers (e. g., homocoupling defects) show a strong impact on the pre-aggregation behavior. The optimized reaction conditions allow for a distinct reduction of the amount of such defects in the resulting copolymers. When the Stille-type products are used in the active layer of organic solar cells (OCSs) together with fullerene acceptors, high power-conversion efficiencies (PCEs) in the range of 8.6-10.8 % have been reported. The high PCEs are particularly related to the pre-aggregation of the conjugated copolymers prior to film formation. Despite quite similar characterization data, non-optimized OCSs with the DAP polymers as replacement for the Stille products afforded a relatively low power-conversion efficiency of up to 2.4 %.

An N-Heterocyclic Carbene Based Silver Precursor for Plasma-Enhanced Spatial Atomic Layer Deposition of Silver Thin Films at Atmospheric Pressure.

A new N-heterocyclic carbene (NHC)-based silver amide compound, 1,3-di-tert-butyl-imidazolin-2-ylidene silver(I) 1,1,1-trimethyl-N-(trimethylsilyl)silanaminide [(NHC)Ag(hmds)] was synthesized and analyzed by single-crystal X-ray diffraction, 1 H and 13 C NMR spectroscopy, as well as EI mass spectrometry, and subsequently evaluated for its thermal characteristics. This new halogen- and phosphine-free Ag atomic layer deposition (ALD) precursor was tested successfully for silver thin film growth in atmospheric pressure plasma enhanced spatial (APP-ALD). High-purity conductive Ag thin films with a low sheet resistance of 0.9 Ω/sq (resistivity: 10-5  Ωcm) were deposited at 100 °C and characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, optical transmittance, and Rutherford back-scattering techniques. The carbene-based Ag precursor and the new APP-ALD process are significant developments in the field of precursor chemistry as well as metal ALD processing.

Impact of Shell Growth on Recombination Dynamics and Exciton-Phonon Interaction in CdSe-CdS Core-Shell Nanoplatelets.

We investigate the impact of shell growth on the carrier dynamics and exciton-phonon coupling in CdSe-CdS core-shell nanoplatelets with varying shell thickness. We observe that the recombination dynamics can be prolonged by more than one order of magnitude, and analyze the results in a global rate model as well as with simulations including strain and excitonic effects. We reveal that type I band alignment in the hetero platelets is maintained at least up to three monolayers of CdS, resulting in approximately constant radiative rates. Hence, observed changes of decay dynamics are not the result of an increasingly different electron and hole exciton wave function delocalization as often assumed, but an increasingly better passivation of nonradiative surface defects by the shell. Based on a global analysis of time-resolved and time-integrated data, we recover and model the temperature dependent quantum yield of these nanostructures and show that CdS shell growth leads to a strong enhancement of the photoluminescence quantum yield. Our results explain, for example, the very high lasing gain observed in CdSe-CdS nanoplatelets due to the type I band alignment that also makes them interesting as solar energy concentrators. Further, we reveal that the exciton-LO-phonon coupling is strongly tunable by the CdS shell thickness, enabling emission line width and coherence length control.

Adsorption Behavior of Lysozyme at Titanium Oxide-Water Interfaces.

We present an in situ X-ray reflectivity study of the adsorption behavior of the protein lysozyme on titanium oxide layers under variation of different thermodynamic parameters, such as temperature, hydrostatic pressure, and pH value. Moreover, by varying the layer thickness of the titanium oxide layer on a silicon wafer, changes in the adsorption behavior of lysozyme were studied. In total, we determined less adsorption on titanium oxide compared with silicon dioxide, while increasing the titanium oxide layer thickness causes stronger adsorption. Furthermore, the variation of temperature from 20 to 80 °C yields an increase in the amount of adsorbed lysozyme at the interface. Additional measurements with variation of the pH value of the system in a region between pH 2 and 12 show that the surface charge of both protein and titanium oxide has a crucial role in the adsorption process. Further pressure-dependent experiments between 50 and 5000 bar show a reduction of the amount of adsorbed lysozyme with increasing pressure.

Spatial Atmospheric Pressure Atomic Layer Deposition of Tin Oxide as an Impermeable Electron Extraction Layer for Perovskite Solar Cells with Enhanced Thermal Stability.

Despite the notable success of hybrid halide perovskite-based solar cells, their long-term stability is still a key-issue. Aside from optimizing the photoactive perovskite, the cell design states a powerful lever to improve stability under various stress conditions. Dedicated electrically conductive diffusion barriers inside the cell stack, that counteract the ingress of moisture and prevent the migration of corrosive halogen species, can substantially improve ambient and thermal stability. Although atomic layer deposition (ALD) is excellently suited to prepare such functional layers, ALD suffers from the requirement of vacuum and only allows for a very limited throughput. Here, we demonstrate for the first time spatial ALD-grown SnOx at atmospheric pressure as impermeable electron extraction layers for perovskite solar cells. We achieve optical transmittance and electrical conductivity similar to those in SnOx grown by conventional vacuum-based ALD. A low deposition temperature of 80 °C and a high substrate speed of 2.4 m min-1 yield SnOx layers with a low water vapor transmission rate of ∼10-4 gm-2 day-1 (at 60 °C/60% RH). Thereby, in perovskite solar cells, dense hybrid Al:ZnO/SnOx electron extraction layers are created that are the key for stable cell characteristics beyond 1000 h in ambient air and over 3000 h at 60 °C. Most notably, our work of introducing spatial ALD at atmospheric pressure paves the way to the future roll-to-roll manufacturing of stable perovskite solar cells.