ABSTRACT
Operando high-throughput evaluation of heterogeneous catalysts by laser-activated membrane introduction mass spectrometry (LAMIMS) elucidates the Pt loading dependence of methylcyclohexane dehydrogenation on platinized γ-alumina beads. A CO2 marking laser rapidly and sequentially heats catalyst beads positioned on a heat-dissipating carbon paper support that overlays a silicone membrane, separating the bead library reaction zone from a quadrupole mass analyzer. The toluene m/z peak varies logarithmically with Pt loading, suggesting that reactivity includes factors that are negatively correlated to Pt loading. These factors may include the Pt/γ-Al2O3 surface interfacial region as one component of a heterogeneous catalytically active surface area/mass. This work demonstrates LAMIMS as a broadly applicable high-throughput operando screening method for heterogeneous catalysts.
ABSTRACT
Pt catalyst supported on nanocapsule MWCNTs-Al(2)O(3) (multi-walled carbon nanotubes, MWCNTs) catalyst has been prepared by microwave-assisted polyol process (MAPP). The results of electrochemical measurements show that the nanocapsule Pt/MWCNTs-Al(2)O(3) catalyst has higher activity due to more uniform dispersion and smaller size of Pt nanoparticles, and higher stability ascribed to the stronger metal-support interaction (SMSI) between Pt nanoparticles and nanocapsule support than in Pt/MWCNTs. Furthermore, the carbon-riveted nanocapsule Pt/MWCNTs-Al(2)O(3) catalyst has been designed and synthesized on the basis of in situ carbonization of glucose. The physical characteristics such as X-ray diffraction (XRD), energy dispersive analysis of X-ray (EDAX), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have indicated that α-Al(2)O(3) indeed entered into the inside of the MWCNTs and formed a nanocapsule support of MWCNTs with α-Al(2)O(3) as stuffing. The accelerated potential cycling tests (APCT) show that carbon-riveted nanocapsule Pt/MWCNTs-Al(2)O(3) possesses 10 times the stability of Pt/C and has 4.5 times the life-span of carbon-riveted Pt/TiO(2)-C reported in our previous work. The significantly enhanced stability for carbon-riveted nanocapsule Pt/MWCNTs-Al(2)O(3) catalyst is attributed to the reasons as follows: the inherently excellent mechanical resistance and stability of α-Al(2)O(3) and MWCNTs in acidic and oxidative environments; SMSI between Pt nanoparticles and the nanocapsule support; the anchoring effect of the carbon layers formed during the carbon-riveting process (CRP); the increase of Pt(0) composition during CRP.
Subject(s)
Aluminum Oxide/chemistry , Carbon/chemistry , Nanocapsules/chemistry , Nanotubes, Carbon/chemistry , Platinum/chemistry , Catalysis , Electrochemical Techniques , Microwaves , Protons , TemperatureABSTRACT
The direct intercalation of a pyrazolate-bridged platinum(II) bipyridyl dimer ([{Pt(dmbpy)(µ-pz)}(2)](2+); dmbpy = 4,4'-dimethyl-2,2'-bipyridine, pz(-) = pyrazolate) within a zirconium phosphate (ZrP) framework has been accomplished. The physical and spectroscopic properties of [{Pt(dmbpy)(µ-pz)}(2)](2+) intercalated in ZrP were investigated by X-ray powder diffraction and X-ray photoelectron, infrared, absorption, and luminescence spectroscopies. Zirconium phosphate layers have a special microenvironment that is capable of supporting a variety of platinum oxidation states. Diffuse reflectance spectra from powders of the blue-gray intercalated materials show the formation of a low-energy band at 600 nm that is not present in the platinum dimer salt. The nonintercalated complex is nonemissive in room-temperature fluid solution, but gives rise to intense blue-green emission in a 4:1 ethanol/methanol 77 K frozen glassy solution. Powders and colloidal suspensions of [{Pt(dmbpy)(µ-pz)}(2)](2+)-exchanged ZrP materials exhibit intense emissions at room-temperature.
ABSTRACT
Sonochemically prepared PtRu (3 : 1) and Johnson Matthey PtRu (1 : 1) were analyzed by X-ray absorption spectroscopy in operating liquid feed direct methanol fuel cells. The total metal loadings were 4 mg cm(-2) unsupported catalysts at the anode and cathode of the membrane electrode assembly. Ex situ XRD lattice parameter analysis indicates partial segregation of the Ru from the PtRu fcc alloy in both catalysts. A comparison of the in situ DMFC EXAFS to that of the as-received catalyst shows that catalyst restructuring during DMFC operation increases the total metal coordination numbers. A combined analysis of XRD determined grain sizes and lattice parameters, ex situ and in situ EXAFS analysis, and XRF of the as-received catalysts enables determination of the catalyst shell composition. The multi-spectrum analysis shows that the core size increases during DMFC operation by reduction of Pt oxides and incorporation of Pt into the core. This increases the mole fraction of Ru in the catalyst shell structure.
ABSTRACT
The CO2 in the cathode exhaust of a liquid feed direct methanol fuel cell (DMFC) has two sources: methanol diffuses through the membrane electrode assembly (MEA) to the cathode where it is catalytically oxidized to CO2; additionally, a portion of the CO2 produced at the anode diffuses through the MEA to the cathode. The potential-dependent CO2 exhaust from the cathode was monitored by online electrochemical mass spectrometry (ECMS) with air and with H2 at the cathode. The precise determination of the crossover rates of methanol and CO2, enabled by the subtractive normalization of the methanol/air to the methanol/H2 ECMS data, shows that methanol decreases the membrane viscosity and thus increases the diffusion coefficients of sorbed membrane components. The crossover of CO2 initially increases linearly with the Faradaic oxidation of methanol, reaches a temperature-dependent maximum, and then decreases. The membrane viscosity progressively increases as methanol is electrochemically depleted from the anode/electrolyte interface. The crossover maximum occurs when the current dependence of the diffusion coefficients and membrane CO2 solubility dominate over the Faradaic production of CO2. The plasticizing effect of methanol is corroborated by measurements of the rotational diffusion of TEMPONE (2,2,6,6-tetramethyl-4-piperidone N-oxide) spin probe by electron spin resonance spectroscopy. A linear inverse relationship between the methanol crossover rate and current density confirms the absence of methanol electro-osmotic drag at concentrations relevant to operating DMFCs. The purely diffusive transport of methanol is explained in terms of current proton solvation and methanol-water incomplete mixing theories.
ABSTRACT
Properties of PtRu nanoparticles prepared using high-intensity sonochemistry are reported. Syntheses were carried out in tetrahydrofuran (THF) containing Ru3+ and Pt4+ in a fixed mole ratio of either 1:10 or 1:1. X-ray diffraction measurements confirmed sonocation produces an alloy phase and showed that the composition of the nanometer scale metal particles is close to the mole fraction of Ru3+ and Pt4+ in solution with deviations that tend toward Ru enrichment in the alloy phase. The materials gave responses that are similar in terms of peak potential and current density, referenced to the catalyst active surface area, to those of bulk alloys in voltammetry experiments involving CO stripping and CH3OH electrochemical oxidation in 0.1 M H2SO4. The results show that sonochemical methods have the potential to produce nanometer scale bimetallic electrocatalysts that possess alloy properties. The materials have application in mechanistic studies of fuel cell reactions and as platforms for the development of CO tolerant fuel cell catalyst.