ABSTRACT
The parallel 29Si magic angle spinning nuclear magnetic resonance (MAS NMR) and Fourier-transform infrared study of synthetic micas made it possible to compare structural features of the tetrasilicic magnesium mica K(Mg2.5â¡0.5) Si4O10(OH)2 (TMM) and their K(Mg3)(Si3.5Mg0.5)O10(OH)2 (TMMA) and K(Mg3)(Si3.5Be0.5)O10(OH)2 (TMMB) derivatives. In the TMM mica, SiO4 tetrahedra are elongated in the plane ab and shortened along the c* direction with respect to those of the phlogopite (Phl) K(Mg3)(Si3Al)O10(OH)2. The substitution of Si4+ by R2+ (Mg2+ or Be2+) produces, besides the 29Si MAS NMR signal of Si (3Si) at -91.2 ppm, new components at -84.4 or -87.5 ppm that correspond to Si (2Si1Mg) or Si(2Si1Be) environments. Tetrahedral cation distributions in TMM/TMMA, TMM/TMMB solid solutions are investigated with respect to the TMM/Phl series by means of NMR and Monte Carlo simulations, concluding that divalent Mg2+ and Be2+ are further dispersed than trivalent Al3+ cations in tetrahedral sheets of micas. In three analyzed series, cation distributions display features between those of the homogeneous dispersion of charges of phlogopites and the maximum dispersion of charges of TMM derivatives. In three series, the location of charge deficits that compensate K+ cations changes from octahedral in TMM to tetrahedral sheets in phlogopite and TMMA and TMMB derivatives.
ABSTRACT
Ageing comes with an increased propensity in the alteration of human organ and body functions, which can e.g. result in multi-morbidity, frailty, polypharmacy, altered medication safety and/or efficacy, and problems with the practical use of medicines in a real world setting. Such problems may e.g. involve difficulties opening containers, swallowing large tablets, breaking tablets by hand, or correctly understanding the user instruction. This review aims to summarize the European regulatory activities towards better medicines for older people, with a main focus on formulation development and the overall drug product design. It addresses the ICH E7 guideline "Studies in support of special populations, geriatrics", the ICH Q8 guideline "Pharmaceutical development", the EMA good practice guide on "Risk minimisation and prevention of medication errors" and the forthcoming EMA CHMP QWP reflection paper on the "Quality aspects (pharmaceutical development) of medicines for older people". In addition, three key aspects to the practical use of medicines by older people are discussed in a wider context: multi-particulates including small tablets (also referred to as mini-tablets), ease of opening and storage conditions. Furthermore, attention is paid to work in progress e.g. incentives by the European national drug regulatory authorities, and patient centric drug product development.
Subject(s)
Drug Approval/legislation & jurisprudence , Drug Design , Geriatrics/standards , Motivation , Aged , Drug Approval/methods , Drug Discovery/legislation & jurisprudence , Drug Discovery/methods , Drug Discovery/standards , Drug Labeling/legislation & jurisprudence , Drug Labeling/methods , Drug Labeling/standards , Drug Storage/legislation & jurisprudence , Drug Storage/methods , Drug Storage/standards , Europe , Geriatrics/methods , Humans , Medication Errors/legislation & jurisprudence , Medication Errors/prevention & control , Tablets/standardsABSTRACT
This paper assesses the current regulatory environment, relevant regulations and guidelines, and their impact on continuous manufacturing. It summarizes current regulatory experience and learning from both review and inspection perspectives. It outlines key regulatory aspects, including continuous manufacturing process description and control strategy in regulatory files, process validation, and key Good Manufacturing Practice (GMP) requirements. In addition, the paper identifies regulatory gaps and challenges and proposes a way forward to facilitate implementation.
Subject(s)
Drug Industry/legislation & jurisprudence , Legislation, Drug , Pharmaceutical Preparations/chemical synthesis , Quality Control , Technology, Pharmaceutical/legislation & jurisprudence , Workflow , Consumer Product Safety , Drug Contamination/legislation & jurisprudence , Drug Contamination/prevention & control , Drug Industry/instrumentation , Drug Industry/methods , Drug Industry/standards , Drug Industry/trends , Equipment Contamination/legislation & jurisprudence , Equipment Contamination/prevention & control , Equipment Failure , Europe , Guidelines as Topic , Humans , Legislation, Drug/trends , Patient Safety , Pharmaceutical Preparations/standards , Technology, Pharmaceutical/instrumentation , Technology, Pharmaceutical/methods , Technology, Pharmaceutical/standards , Technology, Pharmaceutical/trends , United States , United States Food and Drug AdministrationABSTRACT
This paper assesses the current regulatory environment, relevant regulations and guidelines, and their impact on continuous manufacturing. It summarizes current regulatory experience and learning from both review and inspection perspectives. It outlines key regulatory aspects, including continuous manufacturing process description and control strategy in regulatory files, process validation, and key Good Manufacturing Practice (GMP) requirements. In addition, the paper identifies regulatory gaps and challenges and proposes a way forward to facilitate implementation. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.
Subject(s)
Guidelines as Topic , Legislation, Drug , Child , Drug Industry , Europe , Excipients , Food-Drug Interactions , Government Regulation , HumansABSTRACT
Over the last three decades many first-generation nanomedicines have successfully entered routine clinical use and it is now important for medicines regulatory agencies to consider the mechanisms needed to ensure safe introduction of 'follow-on' nanomedicine products, 'nanosimilars'. Moreover, drug regulators need to ensure that 'next'-generation nanomedicines enter clinical development and consequently the market in a safe and timely way for the benefit of public health. Here we review recent European Medicines Agency activities that relate to the effective development and evaluation of nanomedicine products while keeping patient and consumer safety at the forefront.
Subject(s)
Drug Discovery/legislation & jurisprudence , Drug and Narcotic Control , Nanomedicine/legislation & jurisprudence , Europe , Government Agencies , Humans , Nanostructures/therapeutic useSubject(s)
Pharmaceutical Preparations/standards , Quality Control , Child , European Union , Humans , Legislation, DrugABSTRACT
Advanced therapy medicinal products (ATMPs), which include gene therapy medicinal products, somatic cell therapy medicinal products and tissue-engineered products, are at the cutting edge of innovation and offer a major hope for various diseases for which there are limited or no therapeutic options. They have therefore been subject to considerable interest and debate. Following the European regulation on ATMPs, a consolidated regulatory framework for these innovative medicines has recently been established. Central to this framework is the Committee for Advanced Therapies (CAT) at the European Medicines Agency (EMA), comprising a multidisciplinary scientific expert committee, representing all EU member states and European Free Trade Association countries, as well as patient and medical associations. In this article, the CAT discusses some of the typical issues raised by developers of ATMPs, and highlights the opportunities for such companies and research groups to approach the EMA and the CAT as a regulatory advisor during development.
Subject(s)
Genetic Therapy/legislation & jurisprudence , Government Regulation , Stem Cell Transplantation/legislation & jurisprudence , Tissue Engineering/legislation & jurisprudence , European Union , Genetic Therapy/methods , Humans , Stem Cell Transplantation/methodsABSTRACT
PURPOSE: The aim of this study was to identify common trends in the deficiencies identified in the quality part of the dossier during the evaluation of marketing authorisation applications for medicinal products for human use submitted through the EU's centralised procedure. METHODS: We analysed all the adopted Day 120 list of questions on the quality module of 52 marketing authorisation applications for chemical entity medicinal products submitted to the European Medicines Agency and evaluated by the Committee for Medicinal Products for Human Use (CHMP), during 12 consecutive plenary meetings held in 2007 and 2008. Subsequently we calculated the frequency of common deficiencies identified across these applications. RESULTS: Frequencies and trends on quality deficiencies have been recorded and presented for 52 marketing authorisation applications. 32 "Major Objections" originated from 13 marketing authorisation applications. 13 concerned were raised regarding drug substances and 19 for drug products. Furthermore, 905 concerns on drug substance and 1,054 on drug product were also adopted. CONCLUSIONS: The impact of the frequencies and trends in quality deficiencies that were identified are discussed from a regulatory point of view. It is expected that the results of this study will not only be of interest to pharmaceutical companies but will also aid regulators' in obtaining consistent information on drug products based on transparent rules safeguarding the necessary pharmaceutical quality of medicinal products.
Subject(s)
Drug Approval/organization & administration , Drug Industry/organization & administration , Legislation, Drug/organization & administration , Pharmaceutical Preparations , Databases, Factual , Drug Industry/legislation & jurisprudence , Europe , European Union , Humans , Marketing/organization & administrationABSTRACT
The interaction of water with a synthetic saponite clay sample, with a layer charge of 1 per unit cell (0.165 C m(-2)), was investigated by following along water adsorption and desorption in the relative pressure range from 10(-6) to 0.99 (i) the adsorbed amount by gravimetric and near-infrared techniques, (ii) the basal distance and arrangement of water molecules in the interlayer by X-ray and neutron diffraction under controlled water pressure, and (iii) the molecular structure and interaction of adsorbed water molecules by near-infrared (NIR) and Raman spectroscopy under controlled water pressure. The results thus obtained were confronted with Grand Canonical Monte Carlo (GC/MC) simulations. Using such an approach, various well-distinct hydration ranges can be distinguished. In the two first ranges, at low water relative pressure, adsorption occurs on external surfaces only, with no swelling associated. The next range corresponds to the adsorption of water molecules around the interlayer cation without removing it from its position on top of the ditrigonal cavity of the tetrahedral layer and is associated with limited swelling. In the following range, the cation is displaced toward the mid-interlayer region. The interlamellar spacing thus reached, around 12.3 A, corresponds to what is classically referred to as a "one-layer hydrate," whereas no water layer is present in the interlayer region. The next hydration range corresponds to the filling of the interlayer at nearly constant spacing. This leads to the formation of a well-organized network of interlayer water molecules with significant interactions with the clay layer. The structure thus formed leads to a complete extinction of the d001 line in D2O neutron diffraction patterns that are correctly simulated by directly using the molecular configurations derived by GC/MC. The next range (0.50 < P/P0 < 0.80) corresponds to the final swelling of the structure to reach d spacing values of 15.2 A (usually referred to the "two-layer hydrate"). It is associated with the development of a network of liquidlike water molecules more structured than in bulk water. The final hydration range at high relative pressure mainly corresponds to the filling of pores between clay particles.