ABSTRACT
Functional redundancy, the potential for the functional role of one species to be fulfilled by another, is a key determinant of ecosystem viability. Scavenging transfers huge amount of energy through ecosystems and is, therefore, crucial for ecosystem viability and healthy ecosystem functioning. Despite this, relatively few studies have examined functional redundancy in scavenger communities. Moreover, the results of these studies are mixed and confined to a very limited range of habitat types and taxonomic groups. This study attempts to address this knowledge gap by conducting a field experiment in an undisturbed natural environment assessing functional roles and redundancy in vertebrate and invertebrate scavenging communities in a South African savanna. We used a large-scale field experiment to suppress ants in four 1 ha plots in a South African savanna and paired each with a control plot. We distributed three types of small food bait: carbohydrate, protein and seed, across the plots and excluded vertebrates from half the baits using cages. Using this combination of ant suppression and vertebrate exclusion, allowed us explore the contribution of non-ant invertebrates, ants and vertebrates in scavenging and also to determine whether either ants or vertebrates were able to compensate for the loss of one another. In this study, we found the invertebrate community carried out a larger proportion of overall scavenging services than vertebrates. Moreover, although scavenging was reduced when either invertebrates or vertebrates were absent, the presence of invertebrates better mitigated the functional loss of vertebrates than did the presence of vertebrates against the functional loss of invertebrates. There is a commonly held assumption that the functional role of vertebrate scavengers exceeds that of invertebrate scavengers; our results suggest that this is not true for small scavenging resources. Our study highlights the importance of invertebrates for securing healthy ecosystem functioning both now and into the future. We also build upon many previous studies which show that ants can have particularly large effects on ecosystem functioning. Importantly, our study suggests that scavenging in some ecosystems may be partly resilient to changes in the scavenging community, due to the potential for functional compensation by vertebrates and ants.
Subject(s)
Ants , Grassland , Invertebrates , Animals , South Africa , Ants/physiology , Invertebrates/physiology , Vertebrates/physiology , Food Chain , Feeding Behavior , EcosystemABSTRACT
Undergraduate research experiences are an instrumental component of student development, increasing conceptual understanding, promoting inquiry-based learning, and guiding potential career aspirations. Moving one step further, as research continues to become more interdisciplinary, there exists potential to accelerate student growth by granting additional perspectives through collaborative research. This study demonstrates the utilization of a model collaborative research project, specifically investigating the development of sorbent technologies for efficient CO2 capture, which is an important research area for improving environmental sustainability. A model CO2 sorbent system of heteroatom-doped porous carbon is utilized to enable students to gain knowledge of adsorption processes, through combined experimental and computational investigations and learnings. A particular emphasis is placed on creating interdisciplinary learning experiences, exemplified by using density functional theory (DFT) to understand molecular interactions between doped carbon surfaces and CO2 molecules as well as explain underlying physical mechanisms that govern experimental results. The experimental observations about CO2 sorption performance of doped ordered mesoporous carbons (OMCs) can be correlated with simulation results, which can explain how the presence of heteroatom functional groups impact the ability of porous carbon to selectively adsorb CO2 molecules. Through an inquiry-focused approach, students were observed to couple interdisciplinary results to construct holistic explanations, while developing skills in independent research and scientific communications. This collaborative research project allows students to obtain a deeper understanding of sustainability challenges, cultivate confidence in independent research, prepare for future career paths, and most importantly, be exposed to strategies employing interdisciplinary research approaches to address scientific challenges.
ABSTRACT
OBJECTIVES: This multicentre, assessor-blinded, two-arm cluster randomized trial evaluated the clinical and cost-effectiveness of a behaviour change intervention promoting toothbrushing for preventing dental caries in UK secondary schools. METHODS: Pupils aged 11-13 years with their own mobile telephone attending secondary schools with above average free school meals eligibility were randomized (at year-group level) to receive a lesson and twice-daily text messages or to usual care. Year-groups (n = 84) from 42 schools including 4680 pupils (intervention, n = 2262; control, n = 2418) were randomized. RESULTS: In 2383 participants with valid data at baseline and 2.5 years, the primary outcome of presence of at least one treated or untreated carious lesion (D4-6 MFT [Decayed, Missing and Filled Teeth] in permanent teeth using International Caries Detection and Assessment System) was 44.6% in the intervention group and 43.0% in control (odds ratio [OR] 1.04, 95% CI 0.85-1.26, p = .72). There were no statistically significant differences in secondary outcomes of presence of at least one treated or untreated carious lesion (D1-6 MFT), number of D4-6 MFT and D1-6 MFT, plaque and bleeding scores or health-related- (Child Health Utility 9D) or oral health-related- quality of life (CARIES-QC). However, twice-daily toothbrushing, reported by 77.6% of pupils at baseline, increased at 6 months (intervention, 86.9%; control, 83.0%; OR 1.30, 95% CI 1.03-1.63, p = .03), but returned to no difference at 2.5 years (intervention, 81.0%; control, 79.9%; OR 1.05, 95% CI 0.84-1.30, p = .69). Estimated incremental costs and quality-adjusted life-years (QALYs) of the intervention, relative to control, were £1.02 (95% CI -1.29 to 3.23) and -0.003 (95% CI -0.009 to 0.002), respectively, with a 7% chance of being cost-effective (£20 000/QALY gained threshold). CONCLUSION: There was no evidence of statistically significant difference for caries prevalence at 2.5-years. The intervention's positive 6-month toothbrushing behaviour change did not translate into caries reduction. (ISRCTN 12139369). COVID-19 pandemic adversly affected follow-up.
Subject(s)
Cost-Benefit Analysis , Dental Caries , Text Messaging , Toothbrushing , Humans , Dental Caries/prevention & control , Female , Male , Adolescent , Child , United Kingdom , Single-Blind Method , Health BehaviorABSTRACT
Despite groundbreaking advances in the additive manufacturing of polymers, metals, and ceramics, scaled and accurate production of structured carbons remains largely underdeveloped. This work reports a simple method to produce complex carbon materials with very low dimensional shrinkage from printed to carbonized state (less than 4%), using commercially available polypropylene precursors and a fused filament fabrication-based process. The control of macrostructural retention is enabled by the inclusion of fiber fillers regardless of the crosslinking degree of the polypropylene matrix, providing a significant advantage to directly control the density, porosity, and mechanical properties of 3D printed carbons. Using the same printed plastic precursors, different mechanical responses of derived carbons can be obtained, notably from stiff to highly compressible. This report harnesses the power of additive manufacturing for producing carbons with accurately controlled structure and properties, while enabling great opportunities for various applications.
ABSTRACT
Background This paper describes the sociodemographics and oral health of UK secondary school pupils. They were participants of the BRIGHT trial, which was designed to evaluate the effectiveness of a toothbrushing intervention to reduce dental caries.Methods Overall, 4,680 pupils aged 11-13 years attending 42 secondary schools in England, Scotland and Wales with above average proportion of pupils eligible for free school meals, were recruited to the trial. Sociodemographic data were collected. Participants had a clinical assessment for caries, plaque and bleeding and completed measures of oral and general health-related quality of life and oral health behaviours (frequency of toothbrushing, dental attendance and cariogenic food/drinks consumed). Regression analyses were performed.Results Over one-third (34.7%) of participants had caries experience, with 44.5% reporting their oral health had an impact on their daily lives. Factors associated with a statistically significant increased likelihood of caries experience were older age, being female, eligibility for free school meals, worse oral health-related quality of life, higher cariogenic diet, less than twice-daily toothbrushing, living in a more deprived area and lower school attendance.Conclusions The prevalence and impact of dental caries on the lives of pupils remains high, with further oral health promotion activities needed in targeted secondary schools.
ABSTRACT
Pathway complexity results in unique materials from the same components according to the assembly conditions. Here a chiral acyl-semicarbazide gelator forms three different gels of contrasting fibre morphology (termed 'gelmorphs') as well as lyotropic liquid crystalline droplets depending on the assembly pathway. The gels have morphologies that are either hyperhelical (HH-Gel), tape-fibre (TF-Gel) or thin fibril derived from the liquid crystalline phase (LC-Gels) and exhibit very different rheological properties. The gelator exists as three slowly interconverting conformers in solution. All three gels are comprised of an unsymmetrical, intramolecular hydrogen bonded conformer. The kinetics show that formation of the remarkable HH-Gel is cooperative and is postulated to involve association of the growing fibril with a non-gelling conformer. This single molecule dynamic conformational library shows how very different materials with different morphology and hence very contrasting materials properties can arise from pathway complexity as a result of emergent interactions during the assembly process.
ABSTRACT
There is burgeoning interest in how artificial light at night (ALAN) interacts with disease vectors, particularly mosquitoes. ALAN can alter mosquito behaviour and biting propensity, and so must alter disease transfer rates. However, most studies to date have been laboratory-based, and it remains unclear how ALAN modulates disease vector risk. Here, we identify five priorities to assess how artificial light can influence disease vectors in socio-ecological systems. These are to (i) clarify the mechanistic role of artificial light on mosquitoes, (ii) determine how ALAN interacts with other drivers of global change to influence vector disease dynamics across species, (iii) determine how ALAN interacts with other vector suppression strategies, (iv) measure and quantify the impact of ALAN at scales relevant for vectors, and (v) overcome the political and social barriers in implementing it as a novel vector suppression strategy. These priorities must be addressed to evaluate the costs and benefits of employing appropriate ALAN regimes in complex socio-ecological systems if it is to reduce disease burdens, especially in the developing world. This article is part of the theme issue 'Light pollution in complex ecological systems'.
Subject(s)
Culicidae , Light Pollution , Animals , Mosquito Vectors , Disease Vectors , Ecosystem , LightABSTRACT
We show that dansylcadaverine (1) a known in-cell inhibitor of clathrin mediated endocytosis (CME), moderately inhibits dynamin I (dynI) GTPase activity (IC50 45 µM) and transferrin (Tfn) endocytosis in U2OS cells (IC50 205 µM). Synthesis gave a new class of GTP-competitive dynamin inhibitors, the Sulfonadyns™. The introduction of a terminal cinnamyl moiety greatly enhanced dynI inhibition. Rigid diamine or amide links between the dansyl and cinnamyl moieties were detrimental to dynI inhibition. Compounds with in vitro inhibition of dynI activity <10 µM were tested in-cell for inhibition of CME. These data unveiled a number of compounds, e.g. analogues 33 ((E)-N-(6-{[(3-(4-bromophenyl)-2-propen-1-yl]amino}hexyl)-5-isoquinolinesulfonamide)) and 47 ((E)-N-(3-{[3-(4-bromophenyl)-2-propen-1-yl]amino}propyl)-1-naphthalenesulfonamide)isomers that showed dyn IC50 <4 µM, IC50(CME) <30 µM and IC50(SVE) from 12-265 µM. Both analogues (33 and 47) are at least 10 times more potent that the initial lead, dansylcadaverine (1). Enzyme kinetics revealed these sulfonamide analogues as being GTP competitive inhibitors of dynI. Sulfonadyn-47, the most potent SVE inhibitor observed (IC50(SVE) = 12.3 µM), significantly increased seizure threshold in a 6 Hz mouse psychomotor seizure test at 30 (p = 0.003) and 100 mg kg-1 ip (p < 0.0001), with similar anti-seizure efficacy to the established anti-seizure medication, sodium valproate (400 mg kg-1). The Sulfonadyn™ class of drugs target dynamin and show promise as novel leads for future anti-seizure medications.
ABSTRACT
Conventional ordered mesoporous carbon (OMC) production usually requires long processing times in the carbonization step to achieve desired temperatures through controlled ramps. To enable expedited materials discovery, developing advanced manufacturing capability with significantly improved throughput is highly desired. Current approaches for accelerating the synthesis of OMCs include using microwave and Joule heating. However, both methods rely on the introduction of additional components, such as microwave absorbers and electrically conductive agents, within the bulk materials to impart the ability to reach high carbonization temperatures. This work demonstrates accelerated synthesis and functionalization of OMCs through the use of a dielectric barrier discharge plasma, where carbonization can be accomplished within 15 min using 30 W plasma sources, representing more than an order of magnitude increase in polymer-to-carbon conversion kinetics compared to that of a traditionally pyrolyzed analogue. Particularly, the ability of performing rapid carbonization without the use of additional substrates within the OMC precursor systems is advantageous. A systematic investigation of how plasma power, time, and gas atmosphere impact the resulting OMC pore textures and properties is performed, demonstrating the broad applicability of plasma-enabled carbonization methods. Furthermore, we demonstrate that the plasma treatment strategy can be extended to incorporate heteroatoms into the carbon framework by introducing ammonia gas, resulting in OMCs with a nitrogen content up to 4.7 at %, as well as non-Pluronic templating systems for synthesizing OMC with pore sizes larger than 10 nm. As employing a plasma source for materials pyrolysis is an industrially relevant approach, our system can be extended toward scaled synthesis of OMCs with much faster production rates.
ABSTRACT
Species can be both native and alien to a given administrative region. Here we present the first consolidated inventory of these 'native-alien populations' for South Africa, and provide an overview of the data it contains. To gather data, literature searches were performed and experts were consulted both directly and via an on-line survey. Putative native-alien populations were then scored based on a newly developed protocol. The final inventory contains information on 77 native species from 49 families across nine classes that have formed 132 native-alien populations across the terrestrial, freshwater, and marine environments. The phenomenon is rare when compared to the prevalence of related phenomena, such as alien species introduced from other countries (2033 alien species in South Africa), but is under-reported. However, they pose a specific problem for regulators and managers and their importance will likely increase with global change. These data will be integrated with an existing alien species list and, we hope, will provide a useful foundation to address the issue. We encourage those working on biodiversity to contribute more records.
Subject(s)
Biodiversity , Ecosystem , Humans , Fresh Water , Introduced Species , South AfricaABSTRACT
Carbon materials are essential to the development of modern society with indispensable use in various applications, such as energy storage and high-performance composites. Despite great progress, on-demand carbon manufacturing with control over 3D macroscopic configuration is still an intractable challenge, hindering their direct use in many areas requiring structured materials and products. This work introduces a simple and scalable method to generate complex, large-scale carbon structures using easily accessible materials and technologies. 3D-printed, commercial polypropylene (PP) parts can be thermally stabilized through cracking-facilitated diffusion and crosslinking. The newly elucidated mechanism from this work allows thick PP parts to yield carbonaceous products with complex structures through a subsequent pyrolysis step. The approach for enabling PP-to-carbon conversion has consistent product yield and controlled dimensional shrinkage. Under optimized processing conditions, these PP-derived carbons exhibit robust mechanical properties and excellent joule heating performance, demonstrated by their versatile use as heating elements. Furthermore, this process can be extended to recycled PP, enabling the conversion of waste plastic materials to value-added products. This work provides an innovative approach to create structured carbon materials with direct access to complex geometry, which can be transformative to, and broadly benefit, many important technological applications.
ABSTRACT
The ability to manufacture ordered mesoporous materials using low-cost precursors and scalable processes is essential for unlocking their enormous potential to enable advancement in nanotechnology. While templating-based methods play a central role in the development of mesoporous materials, several limitations exist in conventional system design, including cost, volatile solvent consumption, and attainable pore sizes from commercial templating agents. This work pioneers a new manufacturing platform for producing ordered mesoporous materials through direct pyrolysis of crosslinked thermoplastic elastomer-based block copolymers. Specifically, olefinic majority phases are selectively crosslinked through sulfonation reactions and subsequently converted to carbon, while the minority block can be decomposed to form ordered mesopores. We demonstrate that this process can be extended to different polymer precursors for synthesizing mesoporous polymer, carbon, and silica. Furthermore, the obtained carbons possess large mesopores, sulfur-doped carbon framework, with tailorable pore textures upon varying the precursor identities.
ABSTRACT
BACKGROUND: Dental caries is common in young people and has wide-ranging ramifications for health and quality of life. Text messaging interventions show promise as a means to promote oral health behaviour change among young people. This paper reports the internal pilot of the Brushing RemInder 4 Good oral HealTh (BRIGHT) trial, which is evaluating an intervention comprising an oral health classroom lesson and text messages about toothbrushing, on caries in young people. Pilot trial objectives were to evaluate the feasibility and appropriateness of recruitment and data collection methods, the randomisation strategy, and intervention delivery against progression criteria for the main trial. METHODS: This is an internal pilot trial embedded within an assessor-blinded, two-arm, cluster randomised controlled trial. Participants were pupils aged 11-13 years (in year 7/S1 or year 8/S2) in secondary schools in England, Scotland, and Wales with above average pupil eligibility for free school meals. Following completion of pupil baseline questionnaires and dental assessments, year groups within schools were randomised to the intervention or control arm. Approximately 12 weeks later, participants completed a follow-up questionnaire, which included questions about sources of oral health advice to assess intervention contamination between year groups. At the end of the pilot phase, trial conduct was reviewed against pre-specified progression criteria. RESULTS: Ten schools were recruited for the pilot, with 20 year groups and 1073 pupils randomised (average of 54 pupils per year group). Data collection methods and intervention delivery were considered feasible, the response rate to the follow-up questionnaire was over 80%, there was an indication of a positive effect on self-reported toothbrushing, and interest was obtained from 80% of the schools required for the main trial. Despite partial intervention contamination between year groups, within-school randomisation at the level of the year-group was considered appropriate for the main trial, and the sample size was revised to account for partial contamination. Facilitators and barriers to recruitment and data collection were identified and strategies refined for the main trial. CONCLUSIONS: Progression to the main trial of BRIGHT, with some design refinements, was concluded. The internal pilot was an efficient way to determine trial feasibility and optimise trial processes. TRIAL REGISTRATION: ISRCTN registry, ISRCTN12139369 , registered 10/05/2017.
ABSTRACT
The Bis-T series of compounds comprise some of the most potent inhibitors of dynamin GTPase activity yet reported, e. g., (2E,2'E)-N,N'-(propane-1,3-diyl)bis(2-cyano-3-(3,4-dihydroxyphenyl)acrylamide) (2), Bis-T-22. The catechol moieties are believed to limit cell permeability, rendering these compounds largely inactive in cells. To solve this problem, a prodrug strategy was envisaged and eight ester analogues were synthesised. The shortest and bulkiest esters (acetate and butyl/tert-butyl) were found to be insoluble under physiological conditions, whilst the remaining five were soluble and stable under these conditions. These five were analysed for plasma stability and half-lives ranged from â¼2.3â min (propionic ester 4), increasing with size and bulk, to greater than 24â hr (dimethyl carbamate 10). Similar profiles where observed with the rate of formation of Bis-T-22 with half-lives ranging from â¼25â mins (propionic ester 4). Propionic ester 4 was chosen to undergo further testing and was found to inhibit endocytosis in a dose-dependent manner with IC50 â¼8â µM, suggesting this compound is able to effectively cross the cell membrane where it is rapidly hydrolysed to the desired Bis-T-22 parent compound.
Subject(s)
Prodrugs , Prodrugs/pharmacology , Dynamins/pharmacology , Esters/pharmacology , EndocytosisABSTRACT
INTRODUCTION: The COVID-19 pandemic has caused major disruptions in dental care globally, in part due to the potential for contaminated aerosol to be generated by dental activities. This systematic review assesses the literature for changes in aerosol-contamination levels when rotary instruments are used, (1) as distance increases from patient's mouth; (2) as time passes after the procedure; and (3) when using different types of handpieces. METHODS: The review methods and reporting are in line with PRISMA statements. A structured search was conducted over five platforms (September 2021). Studies were assessed independently by two reviewers. To be eligible studies had to assess changes in levels of aerosol contamination over different distances, and time points, with rotary hand instruments. Studies' methodologies and the sensitivity of the contamination-measurement approaches were evaluated. Results are presented descriptively. RESULTS: From 422 papers identified, 23 studies were eligible. All investigated restorative procedures using rotary instruments and one study additionally looked at orthodontic bracket adhesive material removal. The results suggest contamination is significantly reduced over time and distance. However, for almost all studies that investigated these two factors, the sizes of the contaminated particles were not considered, and there were inconclusive findings regarding whether electric-driven handpieces generate lower levels of contaminated particles. CONCLUSION: Aerosol contamination levels reduce as distances, and post-procedure times increase. However, there was sparce and inconsistent evidence on the clearing time and no conclusions could be drawn. High-speed handpieces produce significantly higher levels of contamination than slow-speed ones, and to a lesser extent, micro-motor handpieces. However, when micro-motor handpieces were used with water, the contamination levels rose and were similar to high-speed handpiece contamination levels.
ABSTRACT
Increasing polymer usage has demanded functional additives that decrease fire hazards for end users. While traditional flame-retardant (FR) additives, such as halogenated, phosphorus, and metal hydroxides, greatly reduce flammability and associated fire hazards, research has continually exposed a litany of health and environmental safety concerns. This perspective aims to identify the key components of a successful FR additive and address material, environmental, and health concerns of existing additives. Legislation surrounding FRs and persistent organic pollutants is also discussed to highlight political perception that has resulted in the increased chemical regulations and subsequent banning of FR additives. Finally, future directions of this field regarding nonreactive additives, focusing on the use of bioinspired materials and transition metal chemistries to produce alternatives for polymers with efficacies surpassing traditional additives are presented.
Subject(s)
Biomimetic Materials , Flame Retardants , Polymers , PhosphorusABSTRACT
Fluorescence resonance energy transfer (FRET) is a non-invasive characterization method for studying molecular structures and dynamics, providing high spatial resolution at nanometer scale. Over the past decades, FRET-based measurements are developed and widely implemented in synthetic polymer systems for understanding and detecting a variety of nanoscale phenomena, enabling significant advances in polymer science. In this review, the basic principles of fluorescence and FRET are briefly discussed. Several representative research areas are highlighted, where FRET spectroscopy and imaging can be employed to reveal polymer morphology and kinetics. These examples include understanding polymer micelle formation and stability, detecting guest molecule release from polymer host, characterizing supramolecular assembly, imaging composite interfaces, and determining polymer chain conformations and their diffusion kinetics. Finally, a perspective on the opportunities of FRET-based measurements is provided for further allowing their greater contributions in this exciting area.
Subject(s)
Fluorescence Resonance Energy Transfer , Polymers , Fluorescence Resonance Energy Transfer/methods , Polymers/chemistry , Micelles , Molecular Structure , DiffusionABSTRACT
Over the past years, disposable masks have been produced in unprecedented amounts due to the COVID-19 pandemic. Their increased use imposes significant strain on current waste management practices including landfilling and incineration. This results in large volumes of discarded masks entering the environment as pollutants, and alternative methods of waste management are required to mitigate the negative effects of mask pollution. While current recycling methods can supplement conventional waste management, the necessary processes result in a product with downgraded material properties and a loss of value. This work introduces a simple method to upcycle mask waste into multifunctional carbon fibers through simple steps of thermal stabilization and pyrolysis. The pre-existed fibrous structure of polypropylene masks can be directly converted into carbonaceous structures with high degrees of carbon yield, that are inherently sulfur-doped, and porous in nature. The mask-derived carbon product demonstrates potential use in multiple applications such as for Joule heating, oil adsorption, and the removal of organic pollutants from aqueous environments. We believe that this process can provide a useful alternative to conventional waste management by converting mask waste generated during the COVID-19 pandemic into a product with enhanced value.
ABSTRACT
This systematic review compared children's primary dentition caries experience for those with cleft lip and/or palate (CL/P) and without. Four databases were searched without date restriction for; cross-sectional studies comparing caries experience for children with CL/P to those without. Screening, data extraction and risk assessment were carried out independently (in duplicate). Meta-analyses used a random-effects model. Twenty studies (21 reports) fitting the inclusion criteria comprised 4647 children in primary dentition from 12 countries. For dmft (n = 3016 children; 15 groups), CL/P mean = 3.2; standard deviation = 2.22 and no CL/P mean dmft = 2.5; sd 1.53. For dmfs (n = 1095 children; 6 groups), CL/P mean = 4; sd = 3.5 and no CL/P mean = 3; sd = 2.8. For % caries experience (n = 1094 children; 7 groups), CL/P mean = 65%; sd = 20.8 and no CL/P mean = 52%; sd = 28.1. Meta-analysis showed higher caries experience in children with CL/P, standardised mean difference = 0.46; 95% CI = 0.15, 0.77. Studies' risk of bias was high (n = 7), medium (n-10) and low (n = 3). Children with CL/P had higher caries experience compared to those without CLP.