ABSTRACT
The extradiol dioxygenases (EDOs) and intradiol dioxygenases (IDOs) are nonheme iron enzymes that catalyze the oxidative aromatic ring cleavage of catechol substrates, playing an essential role in the carbon cycle. The EDOs and IDOs utilize very different FeII and FeIII active sites to catalyze the regiospecificity in their catechol ring cleavage products. The factors governing this difference in cleavage have remained undefined. The EDO homoprotocatechuate 2,3-dioxygenase (HPCD) and IDO protocatechuate 3,4-dioxygenase (PCD) provide an opportunity to understand this selectivity, as key O2 intermediates have been trapped for both enzymes. Nuclear resonance vibrational spectroscopy (in conjunction with density functional theory calculations) is used to define the geometric and electronic structures of these intermediates as FeII-alkylhydroperoxo (HPCD) and FeIII-alkylperoxo (PCD) species. Critically, in both intermediates, the initial peroxo bond orientation is directed toward extradiol product formation. Reaction coordinate calculations were thus performed to evaluate both the extra- and intradiol O-O cleavage for the simple organic alkylhydroperoxo and for the FeII and FeIII metal catalyzed reactions. These results show the FeII-alkylhydroperoxo (EDO) intermediate undergoes facile extradiol O-O bond homolysis due to its extra e-, while for the FeIII-alkylperoxo (IDO) intermediate the extradiol cleavage involves a large barrier and would yield the incorrect extradiol product. This prompted our evaluation of a viable mechanism to rearrange the FeIII-alkylperoxo IDO intermediate for intradiol cleavage, revealing a key role in the rebinding of the displaced Tyr447 ligand in this rearrangement, driven by the proton delivery necessary for O-O bond cleavage.
Subject(s)
Dioxygenases , Dioxygenases/chemistry , Ferric Compounds , Catechols/chemistry , Spectrum Analysis , Ferrous CompoundsABSTRACT
The hydroxylase component (S5HH) of salicylate-5-hydroxylase catalyzes C5 ring hydroxylation of salicylate but switches to methyl hydroxylation when a C5 methyl substituent is present. The use of 18O2 reveals that both aromatic and aryl-methyl hydroxylations result from monooxygenase chemistry. The functional unit of S5HH comprises a nonheme Fe(II) site located 12 Å across a subunit boundary from a one-electron reduced Rieske-type iron-sulfur cluster. Past studies determined that substrates bind near the Fe(II), followed by O2 binding to the iron to initiate catalysis. Stopped-flow-single-turnover reactions (STOs) demonstrated that the Rieske cluster transfers an electron to the iron site during catalysis. It is shown here that fluorine ring substituents decrease the rate constant for Rieske electron transfer, implying a prior reaction of an Fe(III)-superoxo intermediate with a substrate. We propose that the iron becomes fully oxidized in the resulting Fe(III)-peroxo-substrate-radical intermediate, allowing Rieske electron transfer to occur. STO using 5-CD3-salicylate-d8 occurs with an inverse kinetic isotope effect (KIE). In contrast, STO of a 1:1 mixture of unlabeled and 5-CD3-salicylate-d8 yields a normal product isotope effect. It is proposed that aromatic and aryl-methyl hydroxylation reactions both begin with the Fe(III)-superoxo reaction with a ring carbon, yielding the inverse KIE due to sp2 â sp3 carbon hybridization. After Rieske electron transfer, the resulting Fe(III)-peroxo-salicylate intermediate can continue to aromatic hydroxylation, whereas the equivalent aryl-methyl intermediate formation must be reversible to allow the substrate exchange necessary to yield a normal product isotope effect. The resulting Fe(III)-(hydro)peroxo intermediate may be reactive or evolve through a high-valent iron intermediate to complete the aryl-methyl hydroxylation.
Subject(s)
Ferric Compounds , Mixed Function Oxygenases , Hydroxylation , Mixed Function Oxygenases/metabolism , Catalysis , Iron , Ferrous Compounds , Salicylates , Oxidation-ReductionABSTRACT
Human histidine triad nucleotide-binding (hHINT) proteins catalyze nucleotide phosphoramidase and acyl-phosphatase reactions that are essential for the activation of antiviral proTides, such as Sofosbuvir and Remdesivir. hHINT1 and hHINT2 are highly homologous but exhibit disparate roles as regulators of opioid tolerance (hHINT1) and mitochondrial activity (hHINT2). NMR studies of hHINT1 reveal a pair of dynamic surface residues (Q62, E100), which gate a conserved water channel leading to the active site 13 Å away. hHINT2 crystal structures identify analogous residues (R99, D137) and water channel. hHINT1 Q62 variants significantly alter the steady-state kcat and Km for turnover of the fluorescent substrate (TpAd), while stopped-flow kinetics indicate that KD also changes. hHINT2, like hHINT1, exhibits a burst phase of adenylation, monitored by fluorescent tryptamine release, prior to rate-limiting hydrolysis and nucleotide release. hHINT2 exhibits a much smaller burst-phase amplitude than hHINT1, which is further diminished in hHINT2 R99Q. Kinetic simulations suggest that amplitude variations can be accounted for by a variable fluorescent yield of the E·S complex from changes in the environment of bound TpAd. Isothermal titration calorimetry measurements of inhibitor binding show that these hHINT variants also alter the thermodynamic binding profile. We propose that these altered surface residues engender long-range dynamic changes that affect the orientation of bound ligands, altering the thermodynamic and kinetic characteristics of hHINT active site function. Thus, studies of the cellular roles and proTide activation potential by hHINTs should consider the importance of long-range interactions and possible protein binding surfaces far from the active site.
Subject(s)
Antiviral Agents , Histidine , Humans , Histidine/chemistry , Antiviral Agents/pharmacology , Analgesics, Opioid , Drug Tolerance , Catalysis , Kinetics , Nucleotides/chemistryABSTRACT
Cellular exposure to tobacco-specific nitrosamines causes formation of promutagenic O6 -[4-oxo-4-(3-pyridyl)but-1-yl]guanine (O6 -POB-G) and O6 -methylguanine (O6 -Me-G) adducts in DNA. These adducts can be directly repaired by O6 -alkylguanine-DNA alkyltransferase (AGT). Repair begins by flipping the damaged base out of the DNA helix. AGT binding and base-flipping have been previously studied using pyrrolocytosine as a fluorescent probe paired to the O6 -alkylguanine lesion, but low fluorescence yield limited the resolution of steps in the repair process. Here, we utilize the highly fluorescent 6-phenylpyrrolo-2'-deoxycytidine (6-phenylpyrrolo-C) to investigate AGT-DNA interactions. Synthetic oligodeoxynucleotide duplexes containing O6 -POB-G and O6 -Me-G adducts were placed within the CpG sites of codons 158, 245, and 248 of the p53 tumor suppressor gene and base-paired to 6-phenylpyrrolo-C in the opposite strand. Neighboring cytosine was either unmethylated or methylated. Stopped-flow fluorescence measurements were performed by mixing the DNA duplexes with C145A or R128G AGT variants. We observe a rapid, two-step, nearly irreversible binding of AGT to DNA followed by two slower steps, one of which is base-flipping. Placing 5-methylcytosine immediately 5' to the alkylated guanosine causes a reduction in rate constant of nucleotide flipping. O6 -POB-G at codon 158 decreased the base flipping rate constant by 3.5-fold compared with O6 -Me-G at the same position. A similar effect was not observed at other codons.
Subject(s)
Cytosine/chemistry , DNA Repair , Fluorescent Dyes/chemistry , O(6)-Methylguanine-DNA Methyltransferase/metabolism , Alkylation , Base Pairing , Biocatalysis , CpG Islands/genetics , Cytidine/analogs & derivatives , Cytidine/chemistry , DNA Adducts/chemistry , DNA Adducts/metabolism , Kinetics , Mutagenesis, Site-Directed , Pyrroles/chemistry , Tumor Suppressor Protein p53/geneticsABSTRACT
Rieske oxygenases (ROs) catalyze a large range of oxidative chemistry. We have shown that cis-dihydrodiol-forming Rieske dioxygenases first react with their aromatic substrates via an active site nonheme Fe(III)-superoxide; electron transfer from the Rieske cluster then completes the product-forming reaction. Alternatively, two-electron-reduced Fe(III)-peroxo or hydroxo-Fe(V)-oxo activated oxygen intermediates are possible and may be utilized by other ROs to expand the catalytic range. Here, the reaction of a Rieske monooxygenase, salicylate 5-hydroxylase, that does not form a cis-dihydrodiol is examined. Single-turnover kinetic studies show fast binding of salicylate and O2. Transfer of the Rieske electron required to form the gentisate product occurs through bonds over â¼12 Å and must also be very fast. However, the observed rate constant for this reaction is much slower than expected and sensitive to substrate type. This suggests that initial reaction with salicylate occurs using the same Fe(III)-superoxo-level intermediate as Rieske dioxygenases and that this reaction limits the observed rate of electron transfer. A transient intermediate (λmax = 700 nm) with an electron paramagnetic resonance (EPR) at g = 4.3 is observed after the product is formed in the active site. The use of 17O2 (I = 5/2) results in hyperfine broadening of the g = 4.3 signal, showing that gentisate binds to the mononuclear iron via its C5-OH in the intermediate. The chromophore and EPR signal allow study of product release in the catalytic cycle. Comparison of the kinetics of single- and multiple-turnover reactions shows that re-reduction of the metal centers accelerates product release â¼300-fold, providing insight into the regulatory mechanism of ROs.
Subject(s)
Hydrocarbons, Aromatic/metabolism , Mixed Function Oxygenases/metabolism , Hydrocarbons, Aromatic/chemistry , Hydroxylation , Kinetics , Oxidation-Reduction , Oxygen/metabolismABSTRACT
The extradiol dioxygenases are a large subclass of mononuclear nonheme Fe enzymes that catalyze the oxidative cleavage of catechols distal to their OH groups. These enzymes are important in bioremediation, and there has been significant interest in understanding how they activate O2. The extradiol dioxygenase homoprotocatechuate 2,3-dioxygenase (HPCD) provides an opportunity to study this process, as two O2 intermediates have been trapped and crystallographically defined using the slow substrate 4-nitrocatechol (4NC): a side-on Fe-O2-4NC species and a Fe-O2-4NC peroxy bridged species. Also with 4NC, two solution intermediates have been trapped in the H200N variant, where H200 provides a second-sphere hydrogen bond in the wild-type enzyme. While the electronic structure of these solution intermediates has been defined previously as FeIII-superoxo-catecholate and FeIII-peroxy-semiquinone, their geometric structures are unknown. Nuclear resonance vibrational spectroscopy (NRVS) is an important tool for structural definition of nonheme Fe-O2 intermediates, as all normal modes with Fe displacement have intensity in the NRVS spectrum. In this study, NRVS is used to define the geometric structure of the H200N-4NC solution intermediates in HPCD as an end-on FeIII-superoxo-catecholate and an end-on FeIII-hydroperoxo-semiquinone. Parallel calculations are performed to define the electronic structures and protonation states of the crystallographically defined wild-type HPCD-4NC intermediates, where the side-on intermediate is found to be a FeIII-hydroperoxo-semiquinone. The assignment of this crystallographic intermediate is validated by correlation to the NRVS data through computational removal of H200. While the side-on hydroperoxo semiquinone intermediate is computationally found to be nonreactive in peroxide bridge formation, it is isoenergetic with a superoxo catecholate species that is competent in performing this reaction. This study provides insight into the relative reactivities of FeIII-superoxo and FeIII-hydroperoxo intermediates in nonheme Fe enzymes and into the role H200 plays in facilitating extradiol catalysis.
Subject(s)
Bacterial Proteins/chemistry , Catechols/chemistry , Coordination Complexes/chemistry , Dioxygenases/chemistry , Oxygen/chemistry , Bacterial Proteins/genetics , Brevibacterium/enzymology , Crystallography, X-Ray , Density Functional Theory , Dioxygenases/genetics , Histidine/chemistry , Iron/chemistry , Models, Chemical , Molecular Structure , Mutation , Spectrum Analysis/methods , VibrationABSTRACT
The Rieske dioxygenases are a major subclass of mononuclear nonheme iron enzymes that play an important role in bioremediation. Recently, a high-spin FeIII-(hydro)peroxy intermediate (BZDOp) has been trapped in the peroxide shunt reaction of benzoate 1,2-dioxygenase. Defining the structure of this intermediate is essential to understanding the reactivity of these enzymes. Nuclear resonance vibrational spectroscopy (NRVS) is a recently developed synchrotron technique that is ideal for obtaining vibrational, and thus structural, information on Fe sites, as it gives complete information on all vibrational normal modes containing Fe displacement. In this study, we present NRVS data on BZDOp and assign its structure using these data coupled to experimentally calibrated density functional theory calculations. From this NRVS structure, we define the mechanism for the peroxide shunt reaction. The relevance of the peroxide shunt to the native FeII/O2 reaction is evaluated. For the native FeII/O2 reaction, an FeIII-superoxo intermediate is found to react directly with substrate. This process, while uphill thermodynamically, is found to be driven by the highly favorable thermodynamics of proton-coupled electron transfer with an electron provided by the Rieske [2Fe-2S] center at a later step in the reaction. These results offer important insight into the relative reactivities of FeIII-superoxo and FeIII-hydroperoxo species in nonheme Fe biochemistry.
Subject(s)
Comamonas/enzymology , Dioxygenases/metabolism , Iron/metabolism , Peroxides/metabolism , Comamonas/chemistry , Comamonas/metabolism , Dioxygenases/chemistry , Iron/chemistry , Models, Molecular , Peroxides/chemistry , Spectrum Analysis , ThermodynamicsABSTRACT
The extradiol, aromatic ring-cleaving enzyme homoprotocatechuate 2,3-dioxygenase (HPCD) catalyzes a complex chain of reactions that involve second sphere residues of the active site. The importance of the second-sphere residue His200 was demonstrated in studies of HPCD variants, such as His200Cys (H200C), which revealed significant retardations of certain steps in the catalytic process as a result of the substitution, allowing novel reaction cycle intermediates to be trapped for spectroscopic characterization. As the H200C variant largely retains the wild-type active site structure and produces the correct ring-cleaved product, this variant presents a valuable target for mechanistic HPCD studies. Here, the high-spin Fe(II) states of resting H200C and the H200C-homoprotocatechuate enzyme-substrate (ES) complex have been characterized with Mössbauer spectroscopy to assess the electronic structures of the active site in these states. The analysis reveals a high-spin Fe(II) center in a low symmetry environment that is reflected in the values of the zero-field splitting (ZFS) (D ≈ - 8 cm(-1), E/D ≈ 1/3 in ES), as well as the relative orientations of the principal axes of the (57)Fe magnetic hyperfine (A) and electric field gradient (EFG) tensors relative to the ZFS tensor axes. A spin Hamiltonian analysis of the spectra for the ES complex indicates that the magnetization axis of the integer-spin S = 2 Fe(II) system is nearly parallel to the symmetry axis, z, of the doubly occupied dxy ground orbital deduced from the EFG and A-values, an observation, which cannot be rationalized by DFT assisted crystal-field theory. In contrast, ORCA/CASSCF calculations for the ZFS tensor in combination with DFT calculations for the EFG- and A-tensors describe the experimental data remarkably well.
Subject(s)
Dioxygenases/metabolism , Dioxygenases/chemistry , Electron Spin Resonance Spectroscopy , Spectroscopy, Mossbauer/methods , Substrate SpecificityABSTRACT
The extradiol-cleaving dioxygenase homoprotocatechuate 2,3-dioxygenase (HPCD) binds substrate homoprotocatechuate (HPCA) and O2 sequentially in adjacent ligand sites of the active site Fe(II). Kinetic and spectroscopic studies of HPCD have elucidated catalytic roles of several active site residues, including the crucial acid-base chemistry of His200. In the present study, reaction of the His200Cys (H200C) variant with native substrate HPCA resulted in a decrease in both kcat and the rate constants for the activation steps following O2 binding by >400 fold. The reaction proceeds to form the correct extradiol product. This slow reaction allowed a long-lived (t1/2 = 1.5 min) intermediate, H200C-HPCAInt1 (Int1), to be trapped. Mössbauer and parallel mode electron paramagnetic resonance (EPR) studies show that Int1 contains an S1 = 5/2 Fe(III) center coupled to an SR = 1/2 radical to give a ground state with total spin S = 2 (J > 40 cm(-1)) in Hexch = JS1·SR. Density functional theory (DFT) property calculations for structural models suggest that Int1 is a (HPCA semiquinone(â¢))Fe(III)(OOH) complex, in which OOH is protonated at the distal O and the substrate hydroxyls are deprotonated. By combining Mössbauer and EPR data of Int1 with DFT calculations, the orientations of the principal axes of the (57)Fe electric field gradient and the zero-field splitting tensors (D = 1.6 cm(-1), E/D = 0.05) were determined. This information was used to predict hyperfine splittings from bound (17)OOH. DFT reactivity analysis suggests that Int1 can evolve from a ferromagnetically coupled Fe(III)-superoxo precursor by an inner-sphere proton-coupled-electron-transfer process. Our spectroscopic and DFT results suggest that a ferric hydroperoxo species is capable of extradiol catalysis.
Subject(s)
Dioxygenases/chemistry , Electron Spin Resonance Spectroscopy , Spectroscopy, MossbauerABSTRACT
Kinetic and spectroscopic studies have shown that the conserved active site residue His200 of the extradiol ring-cleaving homoprotocatechuate 2,3-dioxygenase (FeHPCD) from Brevibacterium fuscum is critical for efficient catalysis. The roles played by this residue are probed here by analysis of the steady-state kinetics, pH dependence, and X-ray crystal structures of the FeHPCD position 200 variants His200Asn, His200Gln, and His200Glu alone and in complex with three catecholic substrates (homoprotocatechuate, 4-sulfonylcatechol, and 4-nitrocatechol) possessing substituents with different inductive capacity. Structures determined at 1.35-1.75 Å resolution show that there is essentially no change in overall active site architecture or substrate binding mode for these variants when compared to the structures of the wild-type enzyme and its analogous complexes. This shows that the maximal 50-fold decrease in kcat for ring cleavage, the dramatic changes in pH dependence, and the switch from ring cleavage to ring oxidation of 4-nitrocatechol by the FeHPCD variants can be attributed specifically to the properties of the altered second-sphere residue and the substrate. The results suggest that proton transfer is necessary for catalysis, and that it occurs most efficiently when the substrate provides the proton and His200 serves as a catalyst. However, in the absence of an available substrate proton, a defined proton-transfer pathway in the protein can be utilized. Changes in the steric bulk and charge of the residue at position 200 appear to be capable of altering the rate-limiting step in catalysis and, perhaps, the nature of the reactive species.
Subject(s)
Bacterial Proteins/chemistry , Dioxygenases/chemistry , Amino Acid Substitution , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Brevibacterium/enzymology , Brevibacterium/genetics , Catalytic Domain/genetics , Conserved Sequence , Crystallography, X-Ray , Dioxygenases/genetics , Dioxygenases/metabolism , Histidine/chemistry , Hydrogen-Ion Concentration , Kinetics , Models, Molecular , Mutagenesis, Site-Directed , Oxygen/metabolism , Protons , Substrate SpecificityABSTRACT
Rieske dearomatizing dioxygenases utilize a Rieske iron-sulfur cluster and a mononuclear Fe(II) located 15 Å across a subunit boundary to catalyze O2-dependent formation of cis-dihydrodiol products from aromatic substrates. During catalysis, O2 binds to the Fe(II) while the substrate binds nearby. Single-turnover reactions have shown that one electron from each metal center is required for catalysis. This finding suggested that the reactive intermediate is Fe(III)-(H)peroxo or HO-Fe(V)âO formed by O-O bond scission. Surprisingly, several kinetic phases were observed during the single-turnover Rieske cluster oxidation. Here, the Rieske cluster oxidation and product formation steps of a single turnover of benzoate 1,2-dioxygenase are investigated using benzoate and three fluorinated analogues. It is shown that the rate constant for product formation correlates with the reciprocal relaxation time of only the fastest kinetic phase (RRT-1) for each substrate, suggesting that the slower phases are not mechanistically relevant. RRT-1 is strongly dependent on substrate type, suggesting a role for substrate in electron transfer from the Rieske cluster to the mononuclear iron site. This insight, together with the substrate and O2 concentration dependencies of RRT-1, indicates that a reactive species is formed after substrate and O2 binding but before electron transfer from the Rieske cluster. Computational studies show that RRT-1 is correlated with the electron density at the substrate carbon closest to the Fe(II), consistent with initial electrophilic attack by an Fe(III)-superoxo intermediate. The resulting Fe(III)-peroxo-aryl radical species would then readily accept an electron from the Rieske cluster to complete the cis-dihydroxylation reaction.
Subject(s)
Bacterial Proteins/chemistry , Iron/chemistry , Models, Chemical , Oxygen/chemistry , Oxygenases/chemistry , Pseudomonas putida/enzymology , Catalysis , Oxidation-ReductionABSTRACT
Galactose oxidase (GO) belongs to a class of proteins that self-catalyze assembly of their redox-active cofactors from active site amino acids. Generation of enzymatically active GO appears to require at least four sequential post-translational modifications: cleavage of a secretion signal sequence, copper-dependent cleavage of an N-terminal pro sequence, copper-dependent formation of a C228-Y272 thioether bond, and generation of the Y272 radical. The last two processes were investigated using a truncated protein (termed premat-GO) lacking the pro sequence and purified under copper-free conditions. Reactions of premat-GO with Cu(II) were investigated using optical, EPR, and resonance Raman spectroscopy, SDS-PAGE, and X-ray crystallography. Premat-GO reacted anaerobically with excess Cu(II) to efficiently form the thioether bond but not the Y272 radical. A potential C228-copper coordinated intermediate (lambda max = 406 nm) in the processing reaction, which had not yet formed the C228-Y272 cross-link, was identified from the absorption spectrum. A copper-thiolate protein complex, with copper coordinated to C228, H496, and H581, was also observed in a 3 min anaerobic soak by X-ray crystallography, whereas a 24 h soak revealed the C228-Y272 thioether bond. In solution, addition of oxygenated buffer to premat-GO preincubated with excess Cu(II) generated the Y272 radical state. On the basis of these data, a mechanism for the formation of the C228-Y272 bond and tyrosyl radical generation is proposed. The 406 nm complex is demonstrated to be a catalytically competent processing intermediate under anaerobic conditions. We propose a potential mechanism which is in common with aerobic processing by Cu(II) until the step at which the second electron acceptor is required.
Subject(s)
Cysteine/metabolism , Galactose Oxidase/chemistry , Galactose Oxidase/metabolism , Tyrosine/metabolism , Catalytic Domain , Copper/metabolism , Cross-Linking Reagents/metabolism , Electron Spin Resonance Spectroscopy , Kinetics , Models, Molecular , Oxygen/metabolism , Protein Conformation , SpectrophotometryABSTRACT
The function of the stacking tryptophan, W290, a second-coordination sphere residue in galactose oxidase, has been investigated via steady-state kinetics measurements, absorption, CD and EPR spectroscopy, and X-ray crystallography of the W290F, W290G, and W290H variants. Enzymatic turnover is significantly slower in the W290 variants. The Km for D-galactose for W290H is similar to that of the wild type, whereas the Km is greatly elevated in W290G and W290F, suggesting a role for W290 in substrate binding and/or positioning via the NH group of the indole ring. Hydrogen bonding between W290 and azide in the wild type-azide crystal structure are consistent with this function. W290 modulates the properties and reactivity of the redox-active tyrosine radical; the Y272 tyrosyl radicals in both the W290G and W290H variants have elevated redox potentials and are highly unstable compared to the radical in W290F, which has properties similar to those of the wild-type tyrosyl radical. W290 restricts the accessibility of the Y272 radical site to solvent. Crystal structures show that Y272 is significantly more solvent exposed in the W290G variant but that W290F limits solvent access comparable to the wild-type indole side chain. Spectroscopic studies indicate that the Cu(II) ground states in the semireduced W290 variants are very similar to that of the wild-type protein. In addition, the electronic structures of W290X-azide complexes are also closely similar to the wild-type electronic structure. Azide binding and azide-mediated proton uptake by Y495 are perturbed in the variants, indicating that tryptophan also modulates the function of the catalytic base (Y495) in the wild-type enzyme. Thus, W290 plays multiple critical roles in enzyme catalysis, affecting substrate binding, the tyrosyl radical redox potential and stability, and the axial tyrosine function.
Subject(s)
Free Radicals/metabolism , Galactose Oxidase/metabolism , Tryptophan/metabolism , Tyrosine/metabolism , Binding Sites/genetics , Catalysis , Crystallography, X-Ray , Free Radicals/chemistry , Galactose/metabolism , Galactose Oxidase/chemistry , Galactose Oxidase/genetics , Kinetics , Molecular Structure , Mutation , Oxidation-Reduction , Protein Structure, Secondary , Spectrophotometry, Atomic , Substrate Specificity , Tryptophan/chemistry , Tryptophan/genetics , Tyrosine/chemistryABSTRACT
2-Hydrazinopyridine (2HP) is an irreversible inhibitor of copper amine oxidases (CAOs). 2HP reacts directly at the C5 position of the TPQ cofactor, yielding an intense chromophore with lambda(max) approximately 430 nm (adduct I) in Escherichia coli amine oxidase (ECAO). The adduct I form of wild type (WT-ECAO) was assigned as a hydrazone on the basis of the X-ray crystal structure. The hydrazone adduct appears to be stabilized by two key hydrogen-bonding interactions between the TPQ-2HP moiety and two active site residues: the catalytic base (D383) and the conserved tyrosine residue (Y369). In this work, we have synthesized a model compound (2) for adduct I from the reaction of a TPQ model compound (1) and 2HP. NMR spectroscopy and X-ray crystallography show that 2 exists predominantly as the azo form (lambda(max) at 414 nm). Comparison of the UV-vis and resonance Raman spectra of 2 with adduct I in WT, D383E, D383N, and Y369F forms of ECAO revealed that adduct I in WT and D383N is a tautomeric mixture where the hydrazone form is favored. In D383E adduct I, the equilibrium is further shifted in favor of the hydrazone form. UV-vis spectroscopic pH titrations of adduct I in WT, D383N, D383E, and 2 confirmed that D383 in WT adduct I is protonated at pH 7 and stabilizes the hydrazone tautomer by a short hydrogen-bonding interaction. The deprotonation of D383 (pKa approximately 9.7) in adduct I resulted in conversion of adduct I to the azo tautomer with a blue shift of the lambda(max) to 420 nm, close to that of 2. In contrast, adduct I in D383N and D383E is stable and did not show any pH-dependent spectral changes. In Y369F, adduct I was not stable and gradually converted into a new species with lambda(max) at approximately 530 nm (adduct II). A detailed mechanism for the adduct I formation in WT has been proposed that is consistent with the mechanism proposed for the oxidation of substrate by CAOs but addresses some key differences in the active site chemistry of hydrazine inhibitors and substrate amines.
Subject(s)
Amine Oxidase (Copper-Containing)/chemistry , Enzyme Inhibitors/chemistry , Escherichia coli Proteins/chemistry , Pyridones/chemistry , Amine Oxidase (Copper-Containing)/antagonists & inhibitors , Amine Oxidase (Copper-Containing)/genetics , Binding Sites/genetics , Catalysis , Crystallography, X-Ray , Enzyme Stability/genetics , Escherichia coli Proteins/antagonists & inhibitors , Escherichia coli Proteins/genetics , Hydrogen-Ion Concentration , Kinetics , Mutagenesis, Site-Directed , Nuclear Magnetic Resonance, Biomolecular , Schiff Bases/metabolism , Solutions , Spectrophotometry, Ultraviolet , Spectrum Analysis, Raman , Substrate Specificity/genetics , TitrimetryABSTRACT
Adduct I (lambda(max) at approximately 430 nm) formed in the reaction of 2-hydrazinopyridine (2HP) and the TPQ cofactor of wild-type Escherichia coli copper amine oxidase (WT-ECAO) is stable at neutral pH, 25 degrees C, but slowly converts to another spectroscopically distinct species with a lambda(max) at approximately 530 nm (adduct II) at pH 9.1. The conversion was accelerated either by incubation of the reaction mixture at 60 degrees C or by increasing the pH (>13). The active site base mutant forms of ECAO (D383N and D383E) showed spectral changes similar to WT when incubated at 60 degrees C. By contrast, in the Y369F mutant adduct I was not stable at pH 7, 25 degrees C, and gradually converted to adduct II, and this rate of conversion was faster at pH 9. To identify the nature of adduct II, we have studied the effects of pH and divalent cations on the UV-vis and resonance Raman spectroscopic properties of the model compound of adduct I (2). Strikingly, it was found that addition of Cu2+ to 2 at pH 7 gave a product (3) that exhibited almost identical spectroscopic signatures to adduct II. The X-ray crystal structure of 3 shows that it is the copper-coordinated form of 2, where the +2 charge of copper is neutralized by a double deprotonation of 2. These results led to the proposal that adduct II in the enzyme is TPQ-2HP that has migrated onto the active site Cu2+. The X-ray crystal structure of Y369F adduct II confirmed this assignment. Resonance Raman and EPR spectroscopy showed that adduct II in WT-ECAO is identical to that seen in Y369F. This study clearly demonstrates that the hydrogen-bonding interaction between O4 of TPQ and the conserved Tyr (Y369) is important in controlling the position and orientation of TPQ in the catalytic cycle, including optimal orientation for reactivity with substrate amines.
Subject(s)
Amine Oxidase (Copper-Containing)/chemistry , Azo Compounds/chemistry , Chelating Agents/chemistry , Copper/chemistry , Enzyme Inhibitors/chemistry , Escherichia coli Proteins/chemistry , Pyridones/chemistry , Amine Oxidase (Copper-Containing)/antagonists & inhibitors , Amine Oxidase (Copper-Containing)/genetics , Asparagine/genetics , Aspartic Acid/genetics , Binding Sites/genetics , Cations, Divalent/chemistry , Cobalt/chemistry , Crystallography, X-Ray , Enzyme Stability/genetics , Escherichia coli Proteins/antagonists & inhibitors , Escherichia coli Proteins/genetics , Glutamic Acid/genetics , Hydrogen-Ion Concentration , Mutagenesis, Site-Directed , Phenylalanine/genetics , Resorcinols/chemistry , Spectrometry, Mass, Electrospray Ionization , Spectrophotometry, Ultraviolet , Spectrum Analysis, Raman , Tyrosine/geneticsABSTRACT
Advances have been made since 2000 that contribute to our understanding of the biogenesis, structure and mechanism of copper-containing tyrosyl radical enzymes. Efforts to detail the biogenesis of galactose oxidase have produced the structure of the precursor enzyme, which provides a framework for emerging mechanistic studies. The role of the tyrosyl radical of cytochrome c oxidase is being defined in studies that aim to understand the His-Tyr crosslink, the location of the radical and, by direct attempts, to provide evidence for the radical during turnover.