High-Photovoltage Silicon Nanowire for Biological Cofactor Production.

Photocathodic conversion of NAD+ to NADH cofactor is a promising platform for activating redox biological catalysts and enzymatic synthesis using renewable solar energy. However, many photocathodes suffer from low photovoltage, consequently requiring a high cathodic bias for NADH production. Here, we report an n+p-type silicon nanowire (n+p-SiNW) photocathode having a photovoltage of 435 mV to drive energy-efficient NADH production. The enhanced band bending at the n+/p interface accounts for the high photovoltage, which conduces to a benchmark onset potential [0.393 V vs the reversible hydrogen electrode (VRHE)] for SiNW-based photocathodic NADH generation. In addition, the n+p-SiNW nanomaterial exhibits a Faradaic efficiency of 84.7% and a conversion rate of 1.63 µmol h-1 cm-1 at 0.2 VRHE, which is the lowest cathodic potential to achieve the maximum productivity among SiNW-sensitized cofactor production.

Photochemical Diodes for Simultaneous Bias-Free Glycerol Valorization and Hydrogen Evolution.

Artificial photosynthesis offers a route to producing clean fuel energy. However, the large thermodynamic requirement for water splitting along with the corresponding sluggish kinetics for the oxygen evolution reaction (OER) limits its current practical application. Here, we offer an alternative approach by replacing the OER with the glycerol oxidation reaction (GOR) for value-added chemicals. By using a Si photoanode, a low GOR onset potential of -0.05 V vs RHE and a photocurrent density of 10 mA/cm2 at 0.5 V vs RHE can be reached. Coupled with a Si nanowire photocathode for the hydrogen evolution reaction (HER), the integrated system yields a high photocurrent density of 6 mA/cm2 with no applied bias under 1 sun illumination and can run for over 4 days under diurnal illumination. The demonstration of the GOR-HER integrated system provides a framework for designing bias-free photoelectrochemical devices at appreciable currents and establishes a facile approach to artificial photosynthesis.

Nanowire photochemical diodes for artificial photosynthesis.

Artificial photosynthesis can provide a solution to our current energy needs by converting small molecules such as water or carbon dioxide into useful fuels. This can be accomplished using photochemical diodes, which interface two complementary light absorbers with suitable electrocatalysts. Nanowire semiconductors provide unique advantages in terms of light absorption and catalytic activity, yet great control is required to integrate them for overall fuel production. In this review, we journey across the progress in nanowire photoelectrochemistry (PEC) over the past two decades, revealing design principles to build these nanowire photochemical diodes. To this end, we discuss the latest progress in terms of nanowire photoelectrodes, focusing on the interplay between performance, photovoltage, electronic band structure, and catalysis. Emphasis is placed on the overall system integration and semiconductor-catalyst interface, which applies to inorganic, organic, or biologic catalysts. Last, we highlight further directions that may improve the scope of nanowire PEC systems.

Operando studies reveal active Cu nanograins for CO2 electroreduction.

Carbon dioxide electroreduction facilitates the sustainable synthesis of fuels and chemicals1. Although Cu enables CO2-to-multicarbon product (C2+) conversion, the nature of the active sites under operating conditions remains elusive2. Importantly, identifying active sites of high-performance Cu nanocatalysts necessitates nanoscale, time-resolved operando techniques3-5. Here, we present a comprehensive investigation of the structural dynamics during the life cycle of Cu nanocatalysts. A 7 nm Cu nanoparticle ensemble evolves into metallic Cu nanograins during electrolysis before complete oxidation to single-crystal Cu2O nanocubes following post-electrolysis air exposure. Operando analytical and four-dimensional electrochemical liquid-cell scanning transmission electron microscopy shows the presence of metallic Cu nanograins under CO2 reduction conditions. Correlated high-energy-resolution time-resolved X-ray spectroscopy suggests that metallic Cu, rich in nanograin boundaries, supports undercoordinated active sites for C-C coupling. Quantitative structure-activity correlation shows that a higher fraction of metallic Cu nanograins leads to higher C2+ selectivity. A 7 nm Cu nanoparticle ensemble, with a unity fraction of active Cu nanograins, exhibits sixfold higher C2+ selectivity than the 18 nm counterpart with one-third of active Cu nanograins. The correlation of multimodal operando techniques serves as a powerful platform to advance our fundamental understanding of the complex structural evolution of nanocatalysts under electrochemical conditions.

Operando Resonant Soft X-ray Scattering Studies of Chemical Environment and Interparticle Dynamics of Cu Nanocatalysts for CO2 Electroreduction.

Understanding the chemical environment and interparticle dynamics of nanoparticle electrocatalysts under operating conditions offers valuable insights into tuning their activity and selectivity. This is particularly important to the design of Cu nanocatalysts for CO2 electroreduction due to their dynamic nature under bias. Here, we have developed operando electrochemical resonant soft X-ray scattering (EC-RSoXS) to probe the chemical identity of active sites during the dynamic structural transformation of Cu nanoparticle (NP) ensembles through 1 µm thick electrolyte. Operando scattering-enhanced X-ray absorption spectroscopy (XAS) serves as a powerful technique to investigate the size-dependent catalyst stability under beam exposure while monitoring the potential-dependent surface structural changes. Small NPs (7 nm) in aqueous electrolyte were found to experience a predominant soft X-ray beam-induced oxidation to CuO despite only sub-second X-ray exposure. In comparison, large NPs (18 nm) showed improved resistivity to beam damage, which allowed the reliable observation of surface Cu2O electroreduction to metallic Cu. Small-angle X-ray scattering (SAXS) statistically probes the particle-particle interactions of large ensembles of NPs. This study points out the need for rigorous examination of beam effects for operando X-ray studies on electrocatalysts. The strategy of using EC-RSoXS that combines soft XAS and SAXS can serve as a general approach to simultaneously investigate the chemical environment and interparticle information on nanocatalysts.

Photoelectrochemical CO2 Reduction toward Multicarbon Products with Silicon Nanowire Photocathodes Interfaced with Copper Nanoparticles.

The development of photoelectrochemical systems for converting CO2 into chemical feedstocks offers an attractive strategy for clean energy storage by directly utilizing solar energy, but selectivity and stability for these systems have thus been limited. Here, we interface silicon nanowire (SiNW) photocathodes with a copper nanoparticle (CuNP) ensemble to drive efficient photoelectrochemical CO2 conversion to multicarbon products. This integrated system enables CO2-to-C2H4 conversion with faradaic efficiency approaching 25% and partial current densities above 2.5 mA/cm2 at -0.50 V vs RHE, while the nanowire photocathodes deliver 350 mV of photovoltage under 1 sun illumination. Under 50 h of continual bias and illumination, CuNP/SiNW can sustain stable photoelectrochemical CO2 reduction. These results demonstrate the nanowire/catalyst system as a powerful modular platform to achieve stable photoelectrochemical CO2 reduction and the feasibility to facilitate complex reactions toward multicarbons using generated photocarriers.

The presence and role of the intermediary CO reservoir in heterogeneous electroreduction of CO2.

SignificanceThe electroconversion of CO2 to value-added products is a promising path to sustainable fuels and chemicals. However, the microenvironment that is created during CO2 electroreduction near the surface of heterogeneous Cu electrocatalysts remains unknown. Its understanding can lead to the development of ways to improve activity and selectivity toward multicarbon products. This work introduces a method called on-stream substitution of reactant isotope that provides quantitative information of the CO intermediate species present on Cu surfaces during electrolysis. An intermediary CO reservoir that contains more CO molecules than typically expected in a surface adsorbed configuration was identified. Its size was shown to be a factor closely associated with the formation of multicarbon products.

Synthesis and Characterization of Single-Phase Metal Dodecaboride Solid Solutions: Zr1- xY xB12 and Zr1- xU xB12.

Single-phase metal dodecaboride solid solutions, Zr0.5Y0.5B12 and Zr0.5U0.5B12, were prepared by arc melting from pure elements. The phase purity and composition were established by powder X-ray diffraction (PXRD), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and 10B and 11B solid-state nuclear magnetic resonance (NMR) spectroscopy. The effects of carbon addition to Zr1- xY xB12 were studied and it was found that carbon causes fast cooling and as a result rapid nucleation of grains, as well as "templating" and patterning effects of the surface morphology. The hardness of the Zr0.5Y0.5B12 phase is 47.6 ± 1.7 GPa at 0.49 N load, which is ∼17% higher than that of its parent compounds, ZrB12 and YB12, with hardness values of 41.6 ± 2.6 and 37.5 ± 4.3 GPa, respectively. The hardness of Zr0.5U0.5B12 is ∼54% higher than that of its UB12 parent. The dodecaborides were confirmed to be metallic by band structure calculations, diffuse reflectance UV-vis, and solid-state NMR spectroscopies. The nature of the dodecaboride colors-violet for ZrB12 and blue for YB12-can be attributed to charge-transfer. XPS indicates that the metals are in the following oxidation states: Y3+, Zr4+, and U5+/6+. The superconducting transition temperatures ( Tc) of the dodecaborides were determined to be 4.5 and 6.0 K for YB12 and ZrB12, respectively, as shown by resistivity and superconducting quantum interference device (SQUID) measurements. The Tc of the Zr0.5Y0.5B12 solid solution was suppressed to 2.5 K.

Investigation of ternary metal dodecaborides (M1M2M3)B12 (M1, M2 and M3 = Zr, Y, Hf and Gd).

Samples of metal borides with a nominal composition of ((M1)(1-x-z)(M2)(x)(M3)(z)) : 20B (M1, M2 and M3 = Zr, Y, Hf and Gd) were prepared by arc-melting and studied for phase composition (using powder X-ray diffraction (PXRD) and energy dispersive X-ray spectroscopy (EDS)) and mechanical properties (Vickers hardness). Ternary metal dodecaboride phases were successfully synthesized for the majority of compositions, including stabilization of two high-pressure (6.5 GPa) phases (cubic-UB12 structure), HfB12 and GdB12, in (Zr1-x-zHfxGdz) : 20B and (Y1-x-zHfxGdz) : 20B nominal alloy compositions. Unit cell refinement for the samples showed solid solution formation in most cases. Vickers hardness measurements indicated that most samples possess enhanced hardness in comparison to their parent phases, with the alloy (Zr0.50Y0.25Gd0.25) : 20B having a hardness of 46.9 ± 2.4 GPa compared to 41.3 ± 1.1 and 41.6 ± 1.3 GPa for alloy compositions of 1.0 Zr : 20B and 1.0 Y : 20B, respectively, at 0.49 N of applied load. Using the data from this manuscript as well as previous work, pseudo-ternary phase diagrams (at a constant boron content) have been constructed.

Moving the Plasmon of LaB6 from IR to Near-IR via Eu-Doping.

Lanthanum hexaboride (LaB6) has become a material of intense interest in recent years due to its low work function, thermal stability and intriguing optical properties. LaB6 is also a semiconductor plasmonic material with the ability to support strong plasmon modes. Some of these modes uniquely stretch into the infrared, allowing the material to absorb around 1000 nm, which is of great interest to the window industry. It is well known that the plasmon of LaB6 can be tuned by controlling particle size and shape. In this work, we explore the options available to further tune the optical properties by describing how metal vacancies and Eu doping concentrations are additional knobs for tuning the absorbance from the near-IR to far-IR in La1-xEuxB6 (x = 0, 0.2, 0.5, 0.8, and 1.0). We also report that there is a direct correlation between Eu concentration and metal vacancies within the Eu1-xLaxB6.

Effects of Variable Boron Concentration on the Properties of Superhard Tungsten Tetraboride.

Tungsten tetraboride is an inexpensive, superhard material easily prepared at ambient pressure. Unfortunately, there are relatively few compounds in existence that crystallize in the same structure as tungsten tetraboride. Furthermore, the lack of data in the tetraboride phase space limits the discovery of any new superhard compounds that also possess high incompressibility and a three-dimensional boron network that withstands shear. Thus, the focus of the work here is to chemically probe the range of thermodynamically stable tetraboride compounds with respect to both the transition metal and the boron content. Tungsten tetraboride alloys with a variable concentration of boron were prepared by arc-melting and investigated for their mechanical properties and thermal stability. The purity and phase composition were confirmed by energy dispersive X-ray spectroscopy and powder X-ray diffraction. For variable boron WBx, it was found that samples prepared with a metal to boron ratio of 1:11.6 to 1:9 have similar hardness values (∼40 GPa at 0.49 N loading) as well as having a similar thermal oxidation temperature of ∼455 °C. A nearly single phase compound was successfully stabilized with tantalum and prepared with a nearly stoichiometric amount of boron (4.5) as W0.668Ta0.332B4.5. Therefore, the cost of production of WB4 can be decreased while maintaining its remarkable properties. Insights from this work will help design future compounds stable in the adaptable tungsten tetraboride structure.

Effects of Size and Structural Defects on the Vibrational Properties of Lanthanum Hexaboride Nanocrystals.

Lanthanum hexaboride (LaB6) is notable for its thermionic emission and mechanical strength and is being explored for its potential applications in IR-absorbing photovoltaic cells and thermally insulating window coatings. Previous studies have not investigated how the properties of LaB6 change on the nanoscale. Despite interest in the tunable plasmonic properties of nanocrystalline LaB6, studies have been limited due to challenges in the synthesis of phase-pure, size-controlled, high-purity nanocrystals without high temperatures or pressures. Here, we report, for the first time, the ability to control particle size and boron content through reaction temperature and heating ramp rate, which allows the effects of size and defects on the vibrational modes of the nanocrystals to be studied independently. Understanding these effects is important to develop methods to fully control the properties of nanocrystalline LaB6, such as IR absorbance. In contrast to previous studies on stoichiometric LaB6 nanocrystals, we report here that boron content and lanthanum vacancies have a greater influence on their vibrational properties than their particle size.