ABSTRACT
Layered carbides are fascinating compounds due to their enormous structural and chemical diversity, as well as their potential to possess useful and tunable functional properties. Their preparation, however, is challenging and forces synthesis scientists to develop creative and innovative strategies to access high-quality materials. One unique compound among carbides is Mo2Ga2C. Its structure is related to the large and steadily growing family of 211 MAX phases that crystallize in a hexagonal structure (space group P63/mmc) with alternating layers of edge-sharing M6X octahedra and layers of the A-element. Mo2Ga2C also crystallizes in the same space group, with the difference that the A-element layer is occupied by two A-elements, here Ga, that sit right on top of each other (hence named "221" compound). Here, we propose that the Ga content in this compound is variable between 2:2, 2:1, and 2: ≤1 (and 2:0) Mo/Ga ratios. We demonstrate that one Ga layer can be selectively removed from Mo2Ga2C without jeopardizing the hexagonal P63/mmc structure. This is realized by chemical treatment of the 221 phase Mo2Ga2C with a Lewis acid, leading to the "conventional" 211 MAX phase Mo2GaC. Upon further reaction with CuCl2, more Ga is removed and replaced with Cu (instead of fully exfoliating into the Ga-free Mo2CTx MXene), leading to Mo2Ga1-xCuxC still crystallizing with space group P63/mmc, however, with a significantly larger c-lattice parameter. Furthermore, 211 Mo2GaC can be reacted with Ga to recover the initial 221 Mo2Ga2C. All three reaction pathways have not been reported previously and are supported by powder X-ray diffraction (PXRD), electron microscopy, X-ray spectroscopy, and density functional theory (DFT) calculations.
ABSTRACT
Silicon-oxygen compounds are among the most important ones in the natural sciences, occurring as building blocks in minerals and being used in semiconductors and catalysis. Beyond the well-known silicon dioxide, there are phases with different stoichiometric composition and nanostructured composites. One of the key challenges in understanding the Si-O system is therefore to accurately account for its nanoscale heterogeneity beyond the length scale of individual atoms. Here we show that a unified computational description of the full Si-O system is indeed possible, based on atomistic machine learning coupled to an active-learning workflow. We showcase applications to very-high-pressure silica, to surfaces and aerogels, and to the structure of amorphous silicon monoxide. In a wider context, our work illustrates how structural complexity in functional materials beyond the atomic and few-nanometre length scales can be captured with active machine learning.
ABSTRACT
Polymer-derived silicon oxycarbide ceramics (SiCO) have been considered as potential anode materials for lithium- and sodium-ion batteries. To understand their electrochemical storage behavior, detailed insights into structural sites present in SiCO are required. In this work, the study of local structures in SiCO ceramics containing different amounts of carbon is presented. 13 C and 29 Si solid-state MASâ NMR spectroscopy combined with DFT calculations, atomistic modeling, and EPR investigations, suggest significant changes in the local structures of SiCO ceramics even by small changes in the material composition. The provided findings on SiCO structures will contribute to the research field of polymer-derived ceramics, especially to understand electrochemical storage processes of alkali metal/ions such as Na/Na+ inside such networks in the future.
Subject(s)
Metals, Alkali , Density Functional Theory , Ceramics , Ions , Polymers , Magnetic Resonance SpectroscopyABSTRACT
Understanding the nature of ion transfer at the interface between Li metal and solid electrolytes (SE) is essential for further optimization of all-solid-state Li-ion batteries. Thus, the Li transfer across the SE|Li metal interface is investigated by means of ab initio calculations based on density functional theory in this work. The aluminum-doped garnet Li6.25Al0.25La3Zr2O12 (LLZO) is considered as a model SE due to its practical stability against Li metal. A low-energy interface model in bicrystal geometry is constructed and investigated by nudged elastic band calculations as well as ab initio molecular dynamics (AIMD) simulations. In order to distinguish between interface and bulk transport in the AIMD simulations, a post-processing protocol is developed. We find that the activation energies and diffusivities of Li are comparable in bulk LLZO and across the interface, substantiating that the interface kinetics are not rate-limiting. Moreover, electronic structure analysis indicates that charge transfer occurs gradually. Finally, Al3+ loss of LLZO at the interface rationalizes the experimentally observed phase transition from cubic to tetragonal observed close to Li metal contacts.
ABSTRACT
Electron transport in graphene is dominated by its Dirac-like charge carriers. Grain boundaries add a geometric aspect to the transport behavior by coupling differently oriented grains. In the phase coherent limit this aspect allows to relate the transport properties to two factors: the electronic structure of individual grains around the Dirac points and the orientation relation of the Dirac cones within the grain boundary Brillouin zone. Based on this picture it is possible to quantify the size and strain modulation of transport gaps without the need for explicit transport calculations within the non-equilibrium Green functions formalism. In this work we present a semi-analytical method that exploits this picture. Our method can explore arbitrary grain misorientations in the presence of an external strain providing valuable information about the electronic properties of individual grain boundaries.
ABSTRACT
Two-dimensional carbides/nitrides, typically called MXenes, are an emerging member of the ever-growing family of two-dimensional materials. The prediction of a ferromagnetic groundstate in chromium-containing MXenes has triggered growing interest in their chemical exfoliation from Cr-based MAX phases. However, the exfoliation poses serious difficulties using standard etching agents such as hydrofluoric acid (HF). Here, we investigate the exfoliability of Cr2GaC particles by chemical etching with aqueous HF both experimentally and theoretically. Structural and microstructural analyses show that the Cr2GaC particles decompose into chromium carbide and oxide without the formation of a Cr-based MXene. A thermodynamic analysis based on ab initio electronic structure calculations reveals that the exfoliation of Cr-based MXene from Cr2GaC by HF-etching is inhibited by more favorable competing reactions. This result confirms the experimental finding and suggests that HF is an unsuitable etching agent for a successful exfoliation of Cr2GaC.
ABSTRACT
Using isocyanate-functionalized Kraft lignin as a reactive macromonomer for the preparation of polyurethane foams by a prepolymer technique is a well-known strategy to incorporate the biomacromolecule into a higher value polymer material. However, as of today the mechanical properties of the resulting materials are still insufficient for a number of possible applications. One reason for this limitation is that the reaction pathway and the morphological arrangement of such foams is of uttermost complexity and depends on a large number of influencing material-intrinsic factors. One important parameter is the reactivity of the functionalized lignin, which has a great impact on the interphase reaction kinetics and thus, on the geometry and mechanical properties of the resulting polyurethane foams. The reactivity is implied, amongst others, by the electron affinity of the isocyanate moiety. Herein, we investigate the reactivity of Kraft lignin modified with different commercially used isocyanates in the reaction with conventional polyols. Therefore, differently reactive prepolymers were synthesized, characterized and polyurethane foams were prepared thereof by using these compounds and the foam formation kinetics, morphological as well as mechanical properties were investigated. Finally, the results were supported by quantum mechanical calculations of the electron affinities of representative model compounds for the lignin-based prepolymers. This work gives rise to a better understanding of the effect of the reactivity and isocyanate structure linked to Kraft lignin on the polyurethane formation and enables rational choice of the isocyanate for pre-functionalization of lignin to prepare materials with better mechanical performance.
ABSTRACT
Lithium-sulfur (Li-S) batteries with high sulfur loading are urgently required in order to take advantage of their high theoretical energy density. Ether-based Li-S batteries involve sophisticated multistep solid-liquid-solid-solid electrochemical reaction mechanisms. Recently, studies on Li-S batteries have widely focused on the initial solid (sulfur)-liquid (soluble polysulfide)-solid (Li2 S2 ) conversion reactions, which contribute to the first 50% of the theoretical capacity of the Li-S batteries. Nonetheless, the sluggish kinetics of the solid-solid conversion from solid-state intermediate product Li2 S2 to the final discharge product Li2 S (corresponding to the last 50% of the theoretical capacity) leads to the premature end of discharge, resulting in low discharge capacity output and low sulfur utilization. To tackle the aforementioned issue, a catalyst of amorphous cobalt sulfide (CoS3 ) is proposed to decrease the dissociation energy of Li2 S2 and propel the electrochemical transformation of Li2 S2 to Li2 S. The CoS3 catalyst plays a critical role in improving the sulfur utilization, especially in high-loading sulfur cathodes (3-10 mg cm-2 ). Accordingly, the Li2 S/Li2 S2 ratio in the discharge products increased to 5.60/1 from 1/1.63 with CoS3 catalyst, resulting in a sulfur utilization increase of 20% (335 mAh g-1 ) compared to the counterpart sulfur electrode without CoS3 .
ABSTRACT
Graphitization of a polymer layer provides a convenient route to synthesize nanocrystalline graphene on dielectric surfaces. The transparent and conducting wafer scale material is of interest as a membrane and a coating, and for the generation and detection of light, or strain sensing. In this work, we study the formation of nanocrystalline graphene on germanium, a surface which promotes the CVD synthesis of monocrystalline graphene. The surprising result that we obtained through graphitization is the formation of cavities in germanium, over which nanocrystalline graphene is suspended. Depending on the crystallographic orientation of the germanium surface, either trenches in (110)-Ge or pits in (111)-Ge are formed, and their dimensions depend on the graphitization temperature. Using Raman spatial imaging, we can show that nanocrystalline graphene is formed across the entire wafer in spite of the cavity formation. Interestingly, the Raman intensity is suppressed when the material is supported by germanium and is enhanced when the material is suspended. Through simulations, we can show that these effects are induced by the high refractive index of germanium and by interferences of the light field depending on the spacing between graphene and germanium. Using atomic force and scanning electron microscopy, we determined that ripples in the suspended material are induced by the mismatch of thermal expansion coefficients. Our results provide a new route to lithography-free fabrication of suspended membranes.
ABSTRACT
The Ruddlesden-Popper (K2NiF4) type phase La2NiO3F2 was prepared via a polymer-based fluorination of La2NiO4+ d. The compound was found to crystallize in the orthorhombic space group Cccm ( a = 12.8350(4) Å, b = 5.7935(2) Å, c = 5.4864(2) Å). This structural distortion results from an ordered half occupation of the interstitial anion layers and has not been observed previously for K2NiF4-type oxyfluoride compounds. From a combination of neutron and X-ray powder diffraction and 19F magic-angle spinning NMR spectroscopy, it was found that the fluoride ions are only located on the apical anion sites, whereas the oxide ions are located on the interstitial sites. This ordering results in a weakening of the magnetic Ni-F-F-Ni superexchange interactions between the perovskite layers and a reduction of the antiferromagnetic ordering temperature to 49 K. Below 30 K, a small ferromagnetic component was found, which may be the result of a magnetic canting within the antiferromagnetic arrangement and will be the subject of a future low-temperature neutron diffraction study. Additionally, density functional theory-based calculations were performed to further investigate different anion ordering scenarios.
ABSTRACT
We demonstrate a cost-effective synthesis route that provides Si-based anode materials with capacities between 2000 and 3000 mAh·gSi-1 (400 and 600 mAh·gcomposite-1), Coulombic efficiencies above 99.5%, and almost 100% capacity retention over more than 100 cycles. The Si-based composite is prepared from highly porous silicon (obtained by reduction of silica) by encapsulation in an organic carbon and polymer-derived silicon oxycarbide (C/SiOC) matrix. Molecular dynamics simulations show that the highly porous silicon morphology delivers free volume for the accommodation of strain leading to no macroscopic changes during initial Li-Si alloying. In addition, a carbon layer provides an electrical contact, whereas the SiOC matrix significantly diminishes the interface between the electrolyte and the electrode material and thus suppresses the formation of a solid-electrolyte interphase on Si. Electrochemical tests of the micrometer-sized, glass-fiber-derived silicon demonstrate the up-scaling potential of the presented approach.
ABSTRACT
In this article we report on a detailed analysis of the magnetic structures of the magnetic phases of the low temperature (lt-) phase of Mn3(VO4)2 (=Mn3V2O8) with a Kagomé staircase structure determined by means of powder neutron diffraction. Two magnetic transitions were found at â¼25 K (HT1 phase, Cmc'a') and â¼17 K (LT1 phase, Pmc'a'), in excellent agreement with previous reports. The LT1 phase is characterized by commensurate magnetic ordering of the magnetic moments on two magnetic sites of the Mn1a/b (2a + 2d) and Mn2 (8i) ions of the nuclear structure (where for the latter site two different overall orientations of magnetic moments within the ab-plane (Mn2a and Mn2b) can be distinguished. This results in mainly antiferromagnetic interactions between edge-sharing Mn-octahedra within the Kagomé planes. The HT1 phase is characterised by strong spin frustration resulting from the loss of ordering of the magnetic moments of Mn2a/b ions along the b-axis. Both magnetic structures are in agreement with the previously reported ferrimagnetic properties of lt-Mn3(VO4)2 and shed light on the magnetic phase diagram of the compound reported previously. The magnetic structures are discussed with respect to superexchange interaction pathways within the Kagomé layers, which appear to be predominantly antiferromagnetic. The magnetic structures of Mn3(VO4)2 are different compared to those reported for Ni3(VO4)2 and Co3(VO4)2 and represent an unique commensurate way out of spin frustration for compounds with strong antiferromagnetic superexchange interactions within the Kagomé layers. Additionally, we derive a superexchange model, which will be called redox-mediated M-M(')(d(0))-M superexchange and which can help to understand the exclusively ferromagnetic ordering of adjacent Kagomé layers found only for lt-Mn3(VO4)2.
ABSTRACT
The interaction of ethylene carbonate (EC) with Si surfaces is studied by density functional theory. The results show a strong structure sensitivity in the adsorption of EC on Si surfaces. While the adsorbed EC molecule readily decomposes on the Li/Si(111) surface, it does not dissociate on the Li/Si(100) and Li/Si(110) surfaces. On Si(111), the O atom at the top of EC is detached from the EC molecule and binds to the Li adatom, forming Li-O molecules. The mechanism of EC decomposition is the transfer of 2.4 electrons from the surface to the EC molecule, as well as the formation of a covalent bond between the Li adatom and the EC molecule. This result shows that in lithium-ion batteries with Si anodes, dissociation of the solvent and formation of a solid electrolyte interphase layer start as soon as the Li atoms cover the anode surface.
ABSTRACT
We investigate the chemical composition and adhesion of chemical vapour deposited thin-film alumina on TiC using and extending a recently proposed nonequilibrium method of ab initio thermodynamics of deposition growth (AIT-DG) (Rohrer and Hyldgaard 2010 Phys. Rev. B 82 045415). A previous study of this system (Rohrer et al 2010 J. Phys.: Condens. Matter 22 015004) found that use of equilibrium thermodynamics leads to predictions of a non-binding TiC/alumina interface, despite its industrial use as a wear-resistant coating. This discrepancy between equilibrium theory and experiment is resolved by the AIT-DG method which predicts interfaces with strong adhesion. The AIT-DG method combines density functional theory calculations, rate-equation modelling of the pressure evolution of the deposition environment and thermochemical data. The AIT-DG method was previously used to predict prevalent terminations of growing or as-deposited surfaces of binary materials. Here we extend the method to predict surface and interface compositions of growing or as-deposited thin films on a substrate and find that inclusion of the nonequilibrium deposition environment has important implications for the nature of buried interfaces.