ABSTRACT
OBJECTIVES: The present parallel randomized clinical trial aimed to assess, after a 3-year follow-up period, whether the choice of surgical technique-either manual or digitally static guided-and of the operator - non-expert operator or skilled operator- affects the stability of peri-implant marginal bone levels in implants placed 1 mm sub-crestal. MATERIALS AND METHODS: Patients received platform-switched implants (Anyridge, MegaGen Implant Co., Gyeongbuk, South Korea) featuring a 5-degree internal conical connection and supporting single screw-retained fixed crowns. The implants were randomly assigned to be placed through a digitally static guided surgery procedure (Test group - GS) or a freehand surgical technique (Control Group - FH). A non-expert operator (fewer than 20 implants placed in their professional activity) was selected to perform procedures for the GS Group, while a skilled operator (with over 1000 implants placed in their professional activity) was chosen for the FH Group. Marginal bone level (MBL) was measured at prosthesis installation (t0) and 1 (t1), 2 (t2) and 3 years (t3) of follow-up. Changes in MBL from t0 to t3 were analyzed through periapical radiographs. Moreover, MBL changes at all time points were correlated to different supra-crestal soft tissue heights (STH): less than 3 and ≥ 3mm, respectively. RESULTS: 60 implants in 18 patients were examined, with 30 implants allocated to the GS group and 30 to the FH group. The difference in MBL change between the two groups was 0.11 ± 0.22 mm, which was not statistically significant (p=0.61). At the time of prosthetic loading, the mean MBL for implants with STH less than 3mm was 0.33mm higher than implants with STH ≥ 3mm, though this difference was not statistically significant (P=0.065). CONCLUSIONS: Digitally static guided implant placement, performed by a non-expert operator, does not limit marginal bone remodeling, when compared to a freehand procedure performed by an experienced operator. CLINICAL SIGNIFICANCE: After correct and careful planning, early marginal bone levels (MBL) around conical connection, platform-switched implants placed sub-crestally may be stable in time. Digital planning and surgery have the potential to assist non-expert clinicians in achieving implant placements with comparable outcomes to those performed by experts.
ABSTRACT
Computer-aided design and computer-aided manufacturing customized abutments are increasingly used in everyday clinical practice. Nevertheless, solid scientific evidence is currently lacking regarding their potential advantages in terms of soft tissue stability. The main aim of this systematic review and meta-analysis was to compare the soft tissue outcomes of prefabricated versus customized (CAD/CAM) abutments. The present review was registered with PROSPERO (CRD42020161875) and the protocol was developed according to the PRISMA statement. An electronic search was performed on three databases (PubMed, Embase and Cochrane Central) up to May 2023. Data extraction was followed by qualitative and quantitative analysis of the included studies. Three randomized controlled clinical trials and three controlled clinical trials (number of patients = 230; number of dental implants = 230) with a follow-up of between 12 and 36 months were included. No significant differences were observed between prefabricated versus customized (CAD/CAM) abutments regarding midfacial mucosal recession, interproximal papillae and pink aesthetic score (PES) after 12 months. Conclusion: The potential benefits of CAD/CAM abutments on soft tissues should be better clarified in future investigations. The usage of customized CAD/CAM abutments in everyday clinical practice should be based on a careful case-by-case evaluation (CRD42020161875).
ABSTRACT
Introduction/objectives: Probiotics have been proposed as adjuncts to non-surgical periodontal therapy (NSPT), however, the effect of their use remains unclear. The aim of this systematic review and meta-analysis was to analyze the evidence regarding the use of probiotics as an adjunct to NSPT in patients with periodontitis at a clinical, microbiological and immunological level. Data/sources: A comprehensive search to identify clinical studies investigating the use of probiotics as an adjunct to NSPT in patients treated for periodontitis was performed. The data were grouped according to probiotic strain, frequency, form and duration of the probiotic intake. Study selection: A total of 25 articles were included, all articles analysed clinical parameters, 10 included also microbiological findings and only 4 had immunological findings. The difference in probing depth (PD) between the test and the control group was statistically significant in favour of the test group when the probiotics were in the form of lozenges, administered twice a day and when the strain was L. reuteri. In terms of Clinical Attachment Level (CAL) gain the difference was statistically significant in the short and in the medium term but not in the long term. Due to the heterogeneity of the data, it was not possible to compare trough a meta analysis the immunological and the microbiological findings that were therefore analysed only descriptively. Conclusions: The use of probiotics as an adjunct to NSPT in patients with periodontitis appears to provide additional clinical benefits that depend on the duration, the frequency, the form and the strain of probiotic used. Clinical significance: This review not only shows data on the efficacy of probiotics in non-surgical periodontal therapy, but provides important information on their effects over time and which forms of probiotic administration might be most clinically useful.
ABSTRACT
INTRODUCTION: To compare the clinical outcomes of anterior single maxillary implants placed using conventional or guided implant surgery. METHODS: In this retrospective clinical study 44 patients rehabilitated with a single anterior implant in the maxillary arch were included. Twenty-four implants were inserted applying a guided surgery approach (GS), and 20 applying a conventional freehand approach (CS). Outcome measures were: implant survival rate and complications; mean bone level (MBL) evaluated at surgery (T0), after 6 weeks (6 W), and after 1 year (1Y), 2 years (2Y), 3 years (3Y), 4 years (4Y), and 5 years (5Y); patients' satisfaction evaluated through a questionnaire filled out before surgery (BS) and at 1 week, 6 W, 2Y and 5Y; Pink esthetic score (PES) and white esthetic score (WES) evaluated at 1Y, 3Y and 5 Y. Significance of differences between groups were tested by Fisher's exact test, Mann-Whitney U test, and Wilcoxon's signed rank test. RESULTS: During the 5-year follow-up there were no drop-outs and no implant failed. No significant differences between groups were found in MBL. A significant difference between groups was found in VAS scores regarding speech at 2 years, aesthetics at 6 weeks, confidence at 1 week and 6 weeks, satisfaction at T0 and at 1 W, pain/comfort at 1 W and at 6 W; all VAS scores resulted significantly improved compared to baseline. No significant differences in WES were found, while significant differences in PES scores between CS and GS groups were found at 3 and 5 years (p value = 0.023 and 0.004 respectively) with better outcomes for GS. A significant difference over time was found in PES between 5-year and one-year values. CONCLUSIONS: Guided surgery and conventional surgery implants did not show any difference in MBL during the 5-year observation period. Guided surgical procedure guarantee optimal esthetic outcome and seems able to guarantee better soft tissue result over time, even though more long-term studies are necessary to confirm this data.
Subject(s)
Dental Implants, Single-Tooth , Dental Implants , Humans , Retrospective Studies , Treatment Outcome , Esthetics, Dental , Crowns , Maxilla/surgeryABSTRACT
BACKGROUND: The aim of the present retrospective study was to assess peri-implant soft tissue health for implants restored with different prosthetic emergence profile angles. METHODS: Patients were treated with implants supporting fixed dentures and were followed for 3 years. Buccal emergence angle (EA) measured at 3 years of follow-up visits (t1) were calculated for two different groups: Group 1 (153 implants) for restorations with angle between implant axis and prosthetic emergence angle from ≥30°, and Group 2 (67 implants) for those with angle ≤30°, respectively. Image J software was used for the measurements. Moreover, peri-implant soft tissue parameters such as pocket probing depth (PPD), plaque index (PI) and gingival index (GI) were assessed, respectively. RESULTS: A total of 57 patients were included in the analysis and a total of 220 implants were examined. Mean (±SD) EA in Groups 1 and 2 was 46.4 ± 12.2 and 24.5 ± 4.7 degrees, respectively. After 3 years of follow-up, a PPD difference of 0.062 mm (CI95% -0.041 mm; 0.164 mm) was calculated between the two groups and was not statistically significant (p = 0.238). Similar results were found for PI (OR = 0.78, CI95% 0.31; 1.98, p = 0.599). Furthermore, GI scores of 2 and 3 were found for nine implants (5.9%) in Group 1, and for five implants in Group 2 (7.5%). A non-significant difference (p = 0.76) was found. CONCLUSIONS: Peri-implant soft-tissue health does not seem to be influenced by EA itself, when a proper emergence profile is provided for implant-supported reconstructions in anterior areas.
ABSTRACT
The aim of the present retrospective study was to assess marginal bone changes around implants restored with different prosthetic emergence profile angles. Patients were treated with implants supporting fixed dentures and were followed for 3 years. Marginal bone levels (MBL) measured at the prosthesis installation (t0) and at the 3-year follow-up visit (t1) were considered. The MBL change from t0 to t1 was investigated. Two groups were considered: Group 1 for restorations with an angle between implant axis and prosthetic emergence profile >30°, and Group 2 for those with an angle ≤30°, respectively. Moreover, peri-implant soft tissue parameters, such as the modified bleeding index (MBI) and plaque index (PI) were assessed. Seventy-four patients were included in the analysis and a total of 312 implants were examined. The mean EA in groups 1 and 2 was 45 ± 4 and 22 ± 7 degrees, respectively. The mean marginal bone level change (MBL change) of 0.06 ± 0.09 mm and 0.06 ± 0.10 mm were, respectively, in groups 1 and 2. The difference in the MBL change between the two groups was not statistically significant (p = 0.969). The MBL change does not seem to be influenced by the emergence angle for implants with a stable internal conical connection and platform-switching of the abutment diameter.
ABSTRACT
The utilization of digital 3D surface images (STL format) for planning cases of computer-guided implant surgery is very useful in partially edentulous cases. In fully edentulous cases, however, the absence of teeth makes it necessary to add reference markers. The proposed protocol demonstrates a simple procedure that allows for the superimposition of STL and radiologic data (DICOM format). In the presented patient case, the tissue-bearing area of the prosthesis was relined with a polysulfide impression material and sent to the laboratory. A master cast was produced. The prosthesis was relined to improve intraoral stability and was provided with at least three radiopaque 3D markers. An STL copy of the prosthesis and the model was generated through a laboratory scanner. The patient wore the prosthesis with the attached markers during the 3D radiologic examination. In the planning software (CoDiagnostiX; Dental Wings), the prosthesis markers on the STL were matched to the corresponding markers visible on the DICOM data. Then, the STL of the model was matched to that of the prosthesis. Once the STL of the mucosa and the prosthesis were imported into the software, new possibilities arose, ie, the option to add other digital or traditional tooth setups to the same radiologic data or to design a surgical guide based on the actual mucosa of the patient.
Subject(s)
Dental Implants , Spiral Cone-Beam Computed Tomography , Computer-Aided Design , Dental Prosthesis Design , Dental Prosthesis, Implant-Supported , Humans , Imaging, Three-Dimensional , WorkflowABSTRACT
BACKGROUND: There is limited information on the effect of the connection between subcrestally placed implants and abutments on marginal bone levels. The aim of the present retrospective study was to evaluate marginal bone levels after definitive prosthesis delivery around implants with an internal 5° conical connection placed in a subcrestal position. MATERIALS AND METHODS: Patients treated with fixed prostheses supported by implants placed at a subcrestal level between 2012 and 2018 were recalled for a follow-up examination. All implants had 5° internal conical connection with platform switching. Radiographic marginal bone level (MBL) was measured. MBL change between prosthetic delivery (t0) and follow-up examination (t1) was calculated. A multiple regression model was performed to identify the most significant predictors on MBL change. RESULTS: Ninety-three patients and 410 implants, with a mean follow-up of 2.72 ± 1.31 years, were examined. Mean MBL was -1.09 ± 0.65 mm and -1.00 ± 0.37 mm at t0 and t1, respectively, with a mean bone remodeling of 0.09 ± 0.68 mm. An implant's vertical position in relation to the bone crest, the year of follow up and the presence of type-2 controlled diabetes were demonstrated to be influencing factors for MBL modifications. CONCLUSIONS: Subcrestally placed implants with platform switching and internal conical connection maintained stable bone levels over a mean follow-up of more than 2 years. How a tight internal conical connection between abutment and implant may contribute to this clinical evidence should be more deeply investigated. MBL variations seem to be mostly influenced by an implant's vertical position and presence of type-2 controlled diabetes.
ABSTRACT
OBJECTIVES: To investigate in which clinical situations a cantilever fixed implant supported restorations can be a treatment alternative and which complications are reported. MATERIALS AND METHODS: Two operators screened the literature (MEDLINE, EMBASE) and performed a hand search on the main journals dealing with implantology and prosthetics until 31 December 2017. Only articles that considered cantilever implant fixed restorations with at least 10 patients and with a mean follow-up of at least 5 year were selected. The outcome variables were survival of implants and prosthesis, mechanical, technical and biological complications, marginal bone loss. The review was performed according to the PRISMA statements. Risk of bias assessment was evaluated. Failure and complication rates were analysed using random effect Poisson regression models to obtain summary estimate of 5- and 10-year survival and complication rates. RESULTS: A total of nine papers were selected for partially edentulous patients and reported high survival rate of the prosthesis. The estimated survival rate for 5-10 years was calculated to be 98.4% for the implants and 99.2% for the rehabilitations. Mechanical, technical and biological complications were reported with a cumulative 5-10 years complication rate of 28.66% and 26.57% for the patients and for the prosthesis, respectively. Two papers for single implant supporting 2-unit cantilever were not sufficient to draw conclusions. CONCLUSIONS: There is evidence that cantilever can be successful treatment in partially edentulous patients. In two adjacent edentulous sites, data are not yet sufficient.
Subject(s)
Dental Prosthesis, Implant-Supported , Jaw, Edentulous, Partially/surgery , Dental Implantation, Endosseous , Denture, Partial, Fixed , HumansABSTRACT
AIM: To investigate fully edentulous patients rehabilitated with cantilever-fixed implant-supported restorations and to analyse which complications are reported for this type of treatment. MATERIALS AND METHODS: Two operators screened the literature (MEDLINE, EMBASE) and performed a hand search on the main journals dealing with implantology and prosthetics until 31 December 2017. Only articles that considered cantilever implant-fixed restorations with at least 10 patients and with a mean follow-up of at least 5 years were selected. The outcome variables were survival of implants and prosthesis, mechanical, technical and biological complications, marginal bone loss. The review was performed according to the PRISMA statements. The risk of bias was evaluated for each article. Failure and complication rates were analysed using random effect Poisson regression models to obtain summary estimate of 5- and 10-year survival and complication rates. RESULTS: Fourteen papers for fully edentulous patients were selected. The estimated 5 to 10 years survival rate was calculated to be 99.00% and 96.7% for the implants and the prosthesis, respectively. A total of 299 complications (technical and biological) were reported with a cumulative 5-10 years complication rate of 44.41% and 39.46% for the patients and for the prosthesis, respectively. CONCLUSIONS: There is evidence that cantilever can be successful treatment in fully edentulous patients.
Subject(s)
Dental Prosthesis, Implant-Supported , Denture, Complete , Mouth, Edentulous/surgery , Dental Prosthesis, Implant-Supported/adverse effects , Dental Prosthesis, Implant-Supported/methods , Dental Restoration Failure , Denture, Complete/adverse effects , HumansABSTRACT
OBJECTIVES: The aim of the present publication was to report on the EAO Workshop group-4 discussions and consensus statements on the five reviews previously prepared. These reviews provided the scientific evidence on the effect of crown-to-implant ratio, on reconstructions with cantilevers in fully and partially edentulous patients, on biological and technical complications of tilted in comparison with straight implants, and on the effects of osseointegrated implants functioning in a residual dentition. MATERIAL AND METHODS: The group discussed, evaluated, corrected where deemed appropriate, and made recommendations to the authors regarding the following five reviews submitted: (a) Is there an effect of crown-to-implant ratio on implant treatment outcomes?; (b) Implant-supported cantilevered fixed dental rehabilitations in fully edentulous patients; (c) and in partially edentulous patients; (d) Biological and technical complications of tilted implants in comparison with straight implants supporting fixed dental prostheses; (e) What are the adverse effects of osseointegrated implants functioning among natural teeth of a residual dentition? Based on the five manuscripts and the discussion among the group as well as the plenum members, the major findings were summarized, consensus statements were formulated, clinical recommendations were proposed, and areas of future research were identified. RESULTS: Crown-to-implant ratios ranging from 0.9 to 2.2 did not influence the occurrence of biological or technical complications also in single-tooth restorations. Reconstructions with cantilevers for the rehabilitation of fully and partially edentulous jaws showed high implant and reconstruction survival rates. In contrast, the rate of complications-in particular associated with veneering material-was high during the observation period of 5-10 years. The data reported were primarily derived from studies with high risk of bias. The data for single-implant reconstructions were small. There was no evidence that distally tilted implants were associated with higher failure rates and increased amounts of marginal bone loss. The data supporting these findings, however, were at high risk of bias and frequently incompletely reported. Frequent positional changes occurred between the natural teeth and the implant-supported restorations. These changes were more pronounced in younger individuals, and even though they were reduced with age, they still occurred in adult patients. Even though these changes were frequent, potential implications for the patient are unclear. CONCLUSIONS: The use of single-tooth restorations with crown-to-implant ratio in between 0.9 and 2.2 may be considered a viable treatment option. Multiunit reconstructions with cantilevers are a viable treatment option in fully and partially edentulous patients. Clinicians and patients should be aware, however, that complications are frequent and primarily related to resin material used for veneering. There is some evidence that tilting an implant does affect stability of the implant and the surrounding bone. Treatment options to tilted implants should carefully be considered, as the effect on soft tissues and on prosthesis behavior is poorly reported for tilted implants. Positional changes in the dentition in relation to implant-supported restorations occur frequently. The patient should be informed about the possible need for a treatment related to these changes in the long term.
Subject(s)
Crowns/standards , Dental Implantation, Endosseous/standards , Dental Prosthesis, Implant-Supported/standards , Biomechanical Phenomena , Crowns/adverse effects , Dental Implantation, Endosseous/adverse effects , Dental Implantation, Endosseous/methods , Dental Prosthesis, Implant-Supported/adverse effects , Dental Prosthesis, Implant-Supported/methods , Dental Restoration, Permanent/adverse effects , Dental Restoration, Permanent/methods , Dental Restoration, Permanent/standards , Denture, Complete/adverse effects , Denture, Complete/standards , Denture, Partial, Fixed/adverse effects , Denture, Partial, Fixed/standards , Humans , Jaw, Edentulous, Partially/surgery , Mouth, Edentulous/surgery , Treatment OutcomeABSTRACT
PURPOSE: The aim of this study was to compare survival and success rates of 6 mm-long and 10 mm-long implants in partially edentulous posterior areas. MATERIALS AND METHODS: Twenty-four patients with a partially edentulous area were included in the study. Patients were randomly allocated according to a parallel group design to receive 6 mm or 10 mm-long implants. A total of 54 implants were placed (26 × 6 mm implants). Patients were followed for 10 years after prosthetic loading. Outcome measures were prosthesis and implant survival, marginal bone level changes and complications. RESULTS: After 10 years, 17 patients (eight with 6 mm implants and nine with 10 mm implants) were available: three 6 mm and four 10 mm patients were lost to follow-up. One 6 mm implant failed during the healing period and its related prosthesis could not be placed. No implants were lost after loading. Nine patients in the 6 mm group registered a total of 15 complications: two mucositis, six decementations and seven chippings. Ten patients in the 10 mm group registered a total of 13 complications: five mucositis, two decementations and six chippings. Overall the difference for complications between the two groups was not statistically signiï¬cant (P = 0.22; difference in proportion = -0.02; 95% CI: -0.31 to 0.27). Decementations in the 6 mm group were statistically significant higher than the 10 mm group (P = 0.04; difference in proportion = 0.39; 95% CI: 0.03 to 0.74). Marginal bone loss at 10 years was 0.84 and 0.37 mm with the 6 mm and 10 mm groups, respectively (difference between the two groups 0.49 mm; 95% CI -0.31; 1.29; not statistically signiï¬cant: t test P = 0.22). CONCLUSIONS: Rehabilitations supported by 6 mm or 10 mm-long implants showed similar clinical outcomes in terms of survival and success rates, although 6 mm implants had more decementations.
Subject(s)
Dental Implantation, Endosseous , Dental Prosthesis Design , Dental Prosthesis, Implant-Supported , Jaw, Edentulous, Partially , Alveolar Ridge Augmentation , Follow-Up Studies , HumansABSTRACT
PURPOSE: To compare the clinical outcomes of screw-retained vs cemented single crowns supported by customized zirconia abutments on implants. MATERIALS AND METHODS: Thirty-two patients received implant-supported (Regular Neck, Tissue-Level, Straumann AG), single-tooth restorations with customized zirconia abutments in the anterior areas. Participants were randomly assigned to the screw-retained (full-crown abutment [FCA]) group or the cemented (zirconia crown [ZrC]) group and followed up over a 10-year period. Prosthetic and biologic complications, marginal bone level (MBL), mucosal recession, and pink and white esthetic scores (PES and WES, respectively) were evaluated. RESULTS AND CONCLUSION: There were no implant failures during the study period; after 10 years, 94% of crowns were functional. Prosthetic complications were recorded in both groups (three FCA and two ZrC), and no significant difference was found (P = .65). Two cases of mucositis were recorded, one in each group. Esthetic outcomes were assessed using PES and WES scores. MBL was 0.95 mm in the ZrC group and 0.82 mm in the FCA group, with no significant difference between groups. These encouraging preliminary results need to be confirmed with long-term follow-up on larger study samples.
Subject(s)
Bone Screws , Computer-Aided Design , Dental Abutments , Dental Cements , Dental Implant-Abutment Design , Dental Implants, Single-Tooth , Adult , Aged , Esthetics, Dental , Female , Humans , Male , Middle Aged , Prospective Studies , Time Factors , ZirconiumABSTRACT
INTRODUCTION: Prosthetic complications on implant-supported restorations have been documented in several papers published in the literature. Several manufacturers are present on the market but results are often cumulated and may thus be misleading. The objective of the present review is to assess the prosthetic complications of implant-supported restorations with particular interest of the results obtained with prostheses from different manufacturers. EVIDENCE ACQUISITION: A manual search of Medline/PubMed was carried out up to June 2016, yielding a total of 6832 articles, which were narrowed down to 1450, then 347 abstracts to include 55 papers after full text reading. Papers with at least 5 years of follow-up reporting on prosthetic complications of single and fixed partial prosthesis were included. Prosthetic complications were divided into mechanical and technical complications, and reported in a table. EVIDENCE SYNTHESIS: Overall 14.4% of prosthetic complication was found for a total of 6623 restorations followed for an average of 7.4 years (range 5-16 years). Results where then sorted and compared. Single crowns were affected by 1.4% of mechanical complications and 10.9% of technical complications after a mean of 7.4 years. Fixed partial prosthesis were affected by 2.5% of mechanical complications and 18% of technical complications. Screw-retained and cemented restorations were calculated to have a 5 years rate of complications of 21.2% and 9.3%, respectively, which demonstrated a statistically difference with fisher exact test with P<0.1. Only 3 manufacturers presented more than 10 articles and were directly compared with Fisher's exact test with P<0.1. The incidence of overall complications was estimated to be after 5 years of 11.2%, 10.8% and 13.8% for Straumann, Nobel, and Astratech, respectively, but dividing results in mechanical and technical complications, gave different results. Straumann was estimated to have less mechanical complications after 5 years in respect to Nobel and Astratech, but the three were similar for technical complications. CONCLUSIONS: although studies present very different material and methods and do not report all data, some conclusions can be made. The difference between mechanical complications lead the authors to suppose that there might be a difference in results obtained by different implant abutment connections. It is also noticed that all papers were published by expert clinicians and universities research centers that apply rigid surgical and prosthetic protocols and use original abutments.
Subject(s)
Dental Prosthesis, Implant-Supported/adverse effects , Crowns , Dental Cements , Dental Implantation, Endosseous/adverse effects , Dental Restoration, Permanent/adverse effects , Follow-Up Studies , Humans , Postoperative Complications/classification , Postoperative Complications/etiology , Prospective Studies , Prosthesis Design , Retrospective StudiesABSTRACT
PURPOSE: The aim of the present clinical trial was to analyze, through spectrophotometric digital technology, the influence of the abutment material on the color of the peri-implant soft tissue in patients with thin gingival biotype. MATERIAL AND METHODS: Thirty-seven patients received an endosseous dental implant in the anterior maxilla. At time of each definitive prosthesis delivery, an all-ceramic crown has been tried on gold, titanium and zirconia abutment. Peri-implant soft-tissue color has been measured through a spectrophotometer after the insertion of each single abutment. Also facial peri-implant soft-tissue thickness was measured at the level of the implant neck through a caliper. A specific software has been utilized to identify a standardized tissue area and to collect the data before the statistical analysis in Lab* color space. ΔE parameters of the selected abutments were tested for correlation with mucosal thickness. Pearson correlation test was used. RESULTS: Only 15 patients met the study inclusion criteria on peri-implant soft-tissue thickness. Peri-implant soft-tissue color was different from that around natural teeth, no matter which type of restorative material was selected. Measurements regarding all the abutments were above the critical threshold of ΔE 8.74 for intraoral color distinction by the naked eye. The ΔE mean values of gold and zirconium abutments were similar (11.43 and 11.37, respectively) and significantly lower (P = 0.03 and P = 0.04, respectively) than the titanium abutment (13.55). In patients with a facial soft-tissue thickness ≤2 mm, the ΔE mean value of gold and zirconia abutments was significantly lower than that of titanium abutments (P = 0.03 and P = 0.04, respectively) and much more close to the reference threshold of 8.74. CONCLUSIONS: For peri-implant soft tissue of ≤2 mm, gold or zirconia abutments could be selected in anterior areas treatment. Moreover, the thickness of the peri-implant soft tissue seemed to be a crucial factor in the abutment impact on the color of soft tissues with a thickness of ≤2 mm.
Subject(s)
Dental Abutments , Dental Implantation, Endosseous , Dental Materials , Gingiva/diagnostic imaging , Gold , Titanium , Zirconium , Female , Gingiva/anatomy & histology , Humans , Male , Materials Testing , Middle Aged , Prospective Studies , SpectrophotometryABSTRACT
PURPOSE: The aim of this study was to verify the reliability of a system for the fixed retention of complete maxillary prostheses supported by four implants with a follow-up of 2 years. MATERIAL AND METHODS: Patients were treated between September 2009 and December 2010 with four Straumann Bone Level SLActive implants supporting a complete prosthesis (CPs). The two distal implants were positioned mesially to the maxillary sinus and with a mesio-distal inclination ≤ 30° in order to reduce the distal prosthesis cantilever. An immediate loading surgical protocol was used. The CPs were planned to be fixed to multibase abutments to test their retention for a fixed rehabilitation. Clinical and radiographic parameters as probing pocket depth (PPD), bleeding score (mBI), plaque index (PI), and marginal bone loss (MBL) were assessed at a 1- and 2-year follow-up visits. Moreover, any biological and prosthodontic maintenance events were recorded. Clinical and radiographic parameters changes were analyzed. RESULTS: Twenty-one patients treated with a total of 84 implants completed the 2-year examination period. Four patients were lost to follow up. No technical complication was recorded. Also, no implant, reconstruction, or abutment failures were observed. Therefore, an implant and prosthetic survival rate of 100% were achieved after 2 years. The mean periodontal parameter scores after 2 years of function were 2.6 mm for PPD (SD 0.8 mm), 0.3 for mBI (SD 0.5 mm), and 1.2 for PI (SD 0.4 mm) indexes, respectively. In addition, the mean MBL score measured at the 2-year follow-up visit was -0.34 mm (SD of -0.45 mm). Furthermore, no peri-implant soft tissue inflammation or peri-implant infection was observed. CONCLUSIONS: It has been shown that immediate loading of four implants positioned anteriorly to the maxillary sinus could be a reliable treatment procedure to support fixed complete restorations.
Subject(s)
Dental Prosthesis, Implant-Supported/methods , Maxilla/surgery , Aged , Aged, 80 and over , Female , Follow-Up Studies , Humans , Male , Middle Aged , Prospective StudiesABSTRACT
PURPOSE: The aim of this study was to transfer the provisional restoration emergence profile to the final implant-supported restoration and to buccal gingival margin (BGM) stability after 2 years of function. MATERIALS AND METHODS: A total of 33 patients were recruited for treatment of single gaps by means of 33 implant-supported restorations. Fixed provisional crowns were screwed to the fixture and adjusted until the complete peri-implant soft tissue maturation was achieved. After 12 weeks, a second fixture impression was taken by means of a pick-up customization technique in order to transfer the clinical aspect of the peri-implant soft tissues to the master cast. A definitive restoration was delivered. A standardized method from digital photographs was used to assess the gingival margin modification (BGM) from the provisional (P) to the definitive prosthesis installation at baseline (D0), and after 1 (D1) and 2 years (D2) of function. Also, marginal bone loss (MBL) was calculated after 1 (D1) and 2 years (D2) of definitive restoration function. RESULTS: The BGM index at the time of the final restoration installation (D0) was 0.12 ± 0.33 mm if compared with the BGM position of the provisional restoration (P); it was of 0.12 ± 0.46 mm after 1-year of follow-up (D1) and of 0.31 ± 0.21 after 2 years of function (D2). No significant difference was calculated between measurements in different follow-up visits (p > 0.05). No significant MBL was measured between the baseline (D0) and the 1-year follow-up (p = 0.816) with a mean MBL value of 0.2 ± 0.1 mm. Similar result was calculated after 2 years (p = 0.684) with a mean MBL value of 0.3 ± 0.2. CONCLUSION: A modified impression pick-up may be helpful to reproduce the gingival margin position from the provisional to the definitive restoration. Moreover, the gingival zenith position during the follow-up period seemed to be stable. CLINICAL SIGNIFICANCE: The modification of the standard impression pick-up technique may contribute to reproducing a natural emergence profile of esthetic implant prosthetic restorations (from the provisional to the definitive restoration.) With this technique, implant soft tissues stability around CAD-CAM (computer aided design-computer aided manufacturing) abutments can be easily obtained, and the customized abutment shape may better support the scalloped peri-implant soft tissues architecture, especially in anterior areas.
Subject(s)
Cheek/physiopathology , Dental Impression Technique , Gingiva/physiopathology , Humans , Prospective Studies , Reproducibility of ResultsABSTRACT
PURPOSE: The objectives of this study were to evaluate: (1) the clinical outcome of fresh frozen human allogeneic bone grafts (FFB) used for the reconstruction of severely atrophied edentulous ridges; (2) the survival rate of implants placed in the reconstructed areas; and (3) bone resorption. MATERIALS AND METHODS: During a 2-year period, 19 patients with severely atrophied partially or totally edentulous ridges who were candidates for an implant-supported prosthesis were consecutively enrolled and reconstructed with FFB iliac blocks. Five to 7 months later, 117 implants were placed in the reconstructed areas, and prosthetic rehabilitation was started 5 to 6 months afterward. RESULTS: The mean follow-up of patients after prosthetic loading was 27 months (range, 20 to 32 months). Prior to implant placement, graft exposure with partial or total loss of the graft occurred in four patients. After implant placement, bone graft exposures with partial loss of the grafts occurred in nine patients; in two patients, both grafts and implants were removed. The cumulative survival rate of implants was 90.2%. The mean (± standard deviation) graft resorption before implant placement was 0.98 ± 0.77 mm (range, 0 to 4 mm), while these values were 1.21 ± 1.05 mm (range, 0 to 6 mm) at loading, 1.55 ± 1.57 mm (range, 0 to 8 mm) at 12 months, and 1.93 ± 1.38 mm (range, 1 to 9 mm) at 24 months. CONCLUSION: Within the limits of this study (limited sample of patients and short follow-up), the reconstruction of severely atrophic edentulous ridges with FFB is associated with a relevant incidence of bone exposures and partial or total loss of the grafts, which may compromise the long-term survival of implants placed in the reconstructed areas.
Subject(s)
Alveolar Bone Loss/surgery , Alveolar Ridge Augmentation/methods , Bone Transplantation/methods , Dental Implants , Plastic Surgery Procedures/methods , Aged , Aged, 80 and over , Alveolar Process/surgery , Bone Resorption/surgery , Female , Humans , Ilium/surgery , Jaw, Edentulous/surgery , Male , Middle Aged , Postoperative Period , Prospective Studies , Treatment Outcome , Young AdultABSTRACT
PURPOSE: The purpose of this study was to compare (1) the clinical outcome of the reconstruction of extremely atrophic edentulous maxillae with fresh frozen allogeneic bone (FFB) (group A) and autogenous bone (AB) (group B) iliac blocks; and (2) the peri-implant bone resorption and the survival rate of implants in the two groups. MATERIALS AND METHODS: In a 1-year period, eight patients were treated with FFB and seven with AB iliac grafts. Five to seven months afterward, 108 implants were inserted (59 in group A and 49 in group B). Four to five months afterward, patients were rehabilitated with implant-supported prostheses. The mean follow-up was 24 months. RESULTS: Prior to implant placement, graft exposure occurred in two patients in group A and in one patient in group B. The mean graft resorption prior to implant placement was 0.78 mm and 0.54 mm in group A and B, respectively. After implant placement, bone graft exposures with partial loss of the graft occurred in six out of eight patients in group A and in none of the group B patients. The survival rate of implants was 90.1% and 100% in group A and B, respectively. The mean values of peri-implant bone resorption at the end of the follow-up period were 1.64 mm and 0.92 mm in group A and B, respectively. CONCLUSION: Results of this study seem to demonstrate that FFB does not represent a reliable alternative to AB blocks because of the higher rate of bone exposure and partial loss of the grafts, the lower implant survival, and the higher peri-implant bone resorption in FFB patients.
Subject(s)
Alveolar Bone Loss/surgery , Bone Transplantation/methods , Dental Implantation, Endosseous/methods , Ilium/transplantation , Jaw, Edentulous/surgery , Maxilla/surgery , Adult , Aged , Bone Resorption , Female , Humans , Male , Middle Aged , Prospective Studies , Survival Rate , Treatment OutcomeABSTRACT
OBJECTIVE: The aim of this study was to compare crestal bone-level changes, soft tissue parameters and implant success and survival between small-diameter implants made of titanium/zirconium (TiZr) alloy or of Grade IV titanium (Ti) in edentulous mandibles restored with removable overdentures. MATERIALS AND METHODS: This was a randomized, controlled, double-blind, split-mouth multicenter clinical trial. Patients with edentulous mandibles received two Straumann bone-level implants (diameter 3.3 mm), one of Ti Grade IV (control) and one of TiZr (test), in the interforaminal region. Implants were loaded after 6-8 weeks and removable Locator-retained overdentures were placed within 2 weeks of loading. Modified plaque and sulcus bleeding indices, radiographic bone level, and implant survival and success were evaluated up to 36 months. RESULTS: Of 91 treated patients, 75 completed the three-year follow-up. Three implants were lost (two control and one test implant). The survival rates were 98.7% and 97.3%, and the mean marginal bone level change was -0.78 ± 0.75 and -0.60 ± 0.71 mm for TiZr and Ti Grade IV implants. Most patients had a plaque score of 0 or 1 (54% for test and 51.7% for control), and a sulcus bleeding score of 0 (46.1% for test and 44.9% for control). No significant differences were found between the two implant types for bone-level change, soft tissue parameters, survival and success. CONCLUSIONS: After 36 months, similar outcomes were found between Ti Grade IV and TiZr implants. The results confirm that the results seen at 12 months continue over time.