Elucidating hematological profile and electrolyte balance in oral cancer patients.

BACKGROUND: Oral cancer is a serious health issue in both the developing and developed worlds, and it is one of the most common forms of cancer of the head and neck. In accordance with the 2017 World Health Organization classification, oral cancer can affect any part of the mouth, including the buccal mucosa, the front two-thirds of the tongue, the lip, the palate, the vestibule, the alveolus, the floor of the mouth, and the gingivae. Hematology and electrolyte balance have been proposed as tumor indicators and paths into cancer's genesis. Examining the patient's blood count and electrolyte levels in order to better understand their oral cancer. METHODS: Electrolyte abnormalities are common in cancer patients and may be caused by the disease itself or by treatment. Hyponatremia is the most frequent electrolyte problem in cancer patients, and it is typically caused by the syndrome of improper ADH secretion. Although electrolyte problems are associated with a worse prognosis for cancer patients, timely and effective therapy has the potential to enhance both short- and long-term results and quality of life. Hematological tests on patients with oral cancer, including differential cell count, white blood cell count, and hemoglobin level. RESULTS: Compared to healthy controls, oral cancer patients show statistically significant differences in a number of biochemical parameters, including electrolytes (sodium, P<0.05; potassium, P=0.89; chloride, P<0.05); differential count (neutrophils, P<0.05; basophils, P<0.05). A significant risk factor for cancer patients is an electrolyte imbalance, which has been linked to inappropriate anti-diabetic hormone release. CONCLUSIONS: Clinicians will find these shifts in electrolytic level helpful in diagnosing and tracking oral cancer. Potentially malignant oral disorders and Oral squamous cell carcinoma may be better predicted using a combination of TLC, neutrophil, and lymphocyte counts, as shown in this study.

Prediction of Interactomic HUB Genes in Periodontitis With Acute Myocardial Infarction.

BACKGROUND: Acute myocardial infarction (AMI) risk correlates with C-reactive protein (CRP) levels, suggesting systemic inflammation is present well before AMI. Studying different types of periodontal disease (PD), extremely common in individuals at risk for AMI, has been one important research topic. According to recent research, AMI and PD interact via the systemic production of certain proinflammatory and anti-inflammatory cytokines, small signal molecules, and enzymes that control the onset and development of both disorders' chronic inflammatory reactions. This study uses machine learning to identify the interactome hub biomarker genes in acute myocardial infarction and periodontitis. METHODS: GSE208194 and GSE222883 were chosen for our research after a thorough search using keywords related to the study's goal from the gene expression omnibus (GEO) datasets. DEGs were identified from the GEOR tool, and the hub gene was identified using Cytoscape-cytohubba. Using expression values, Random Forest, Adaptive Boosting, and Naive Bayes, widgets-generated transcriptomics data, were labelled, and divided into 80/20 training and testing data with cross-validation. ROC curve, confusion matrix, and AUC were determined. In addition, Functional Enrichment Analysis of Differentially Expressed Gene analysis was performed. RESULTS: Random Forest, AdaBoost, and Naive Bayes models with 99%, 100%, and 75% AUC, respectively. Compared to RF, AdaBoost, and NB classification models, AdaBoost had the highest AUC. Categorization algorithms may be better predictors than important biomarkers. CONCLUSIONS: Machine learning model predicts hub and non-hub genes from genomic datasets with periodontitis and acute myocardial infarction.

Gingival health, plaque accumulation, and restoration outcomes in deciduous anterior teeth: evaluating zirconia crowns versus composite resin strip crowns.

BACKGROUND: Zirconia crowns, resembling crystals and with enamel-like aesthetics, are recent entrants in pediatric restorative dentistry. Despite growing use, their empirical efficacy remains under-explored. The aim of this study is to compare resin composite strip crowns and premanufactured zirconia crowns on primary maxillary incisors. METHODS: In the Pediatric Dental Clinics, 240 primary maxillary incisors (69 patients) were treated with either zirconia (120 teeth) or composite strip crowns (120 teeth). Evaluations of gingival health, plaque, secondary caries, restoration failure, and opposing teeth wear occurred at 3, 6, and 12-month intervals. RESULTS: At 3 months, zirconia crowns showed less gum bleeding (P=0.006) and plaque. Through 6 and 12 months, zirconia crowns exhibited fewer failures but higher opposing teeth wear. Strip crowns indicated greater tooth material loss. CONCLUSIONS: Zirconia crowns demonstrated superior gingival health and durability over composite resin strip crowns but caused increased wear on opposing teeth.

The Effects of a Cool Saline Solution Irrigation on Mandibular Third Molar Extraction Site: A Postoperative Split-Mouth Evaluation.

OBJECTIVE: This study aimed to evaluate the effects of sterile saline solution irrigation (lavage) performed after mandibular third molar extraction on postoperative complications, utilizing a split-mouth randomized clinical trial design. METHODS: Seventeen healthy participants requiring bilateral mandibular third molar extraction were enrolled in this single-center study. In each participant, one impacted third molar was designated as the experimental group and subjected to saline lavage at 4 °C. In contrast, the control group was the other impacted third molar, undergoing saline lavage at 25 °C. Various parameters, including postoperative pain, mouth opening, and facial swelling, were assessed using standardized measures and three-dimensional facial scanning at multiple time points. RESULTS: The average age of participants was 26.66 ± 4.1 years, with no postoperative complications observed in either group. The duration of surgery did not significantly differ between groups. Postoperative pain was significantly reduced in the experimental group during the immediate postoperative period compared with the control group, but this difference diminished over time. No significant differences were observed in mouth opening or facial swelling between groups at any time. CONCLUSION: In site 4 °C, sterile saline solution irrigation after mandibular third molar extraction may effectively reduce early postoperative complications, particularly pain, without prolonging surgical duration.

Digital denture with mucostatic base and functional borders: A cast-free digital technique.

Digital complete dentures fabricated using a mucostatic impression, like intraoral scans, are desirable for their beneficial effect on long-term residual ridge stability but may have less retention than those fabricated with a mucocompressive impression. Border molding procedure may improve initial retention, thus favoring adaptation to new dentures, especially in cases where neuromuscular dysfunctions may diminish the patient's ability to cope with adapting to existing motor patterns or learn new ones. However, a mucocompressive impression may cause higher residual ridge resorption, thus resulting in a retention decrease over time. A desirable combination would be a digital denture with a mucostatic intaglio surface obtained from intraoral scans and functional borders. A cast-free digital workflow for that is demonstrated in this technical report.

Indications for Dental Specialists for Treating Obstructive Sleep Apnea with Mandibular Advancement Devices: A Narrative Review.

Obstructive sleep apnea (OSA) syndrome is characterized by repeated airway collapse during sleep. It determines cardiovascular, pulmonary, and neurocognitive consequences and is associated with several daytime and nighttime symptoms that influence the patient's quality of life. The contribution of the dental specialist in the clinical management of OSA patients entails participating in the screening process as diagnostic sentinels and providing adequate treatment using mandibular advancement devices (MADs). Since the treatment of OSA requires a multidisciplinary approach, including different medical specialists, dentists should have a comprehensive understanding of medical and dental factors that influence the strategy and effectiveness of OSA treatment with MAD. Such expertise is crucial in determining the appropriate treatment indications and helps clinicians establish a consolidated position within the multidisciplinary OSA team. In this regard, this review summarizes the evidence of the clinical indications for MAD treatment and provides the dental specialist with helpful information about medical, functional, and other relevant factors that should be considered during diagnosis, treatment plan, and follow-up stages. Information retrieved was organized and discussed, generating specific domains/queries oriented to the clinical management of OSA patients from the clinical perspective of dental specialists.

Accuracy of temporomandibular disorders diagnosis evaluated through the diagnostic criteria for temporomandibular disorder (DC/TDM) Axis II compared to the Axis I evaluations: a systematic review and meta-analysis.

BACKGROUND: The temporomandibular joint (TMJ) is a complex joint that facilitates mandibular movements during speech, chewing, and swallowing activities. The Axis I evaluation of the DC/TMD focuses on assessing physical diagnoses related to TMDs. It includes an assessment of pain and functional limitations, such as jaw opening range, joint sounds, and joint tenderness. The Axis II evaluation of the DC/TMD provides information on the patient's psychological status and quality of life. This Systematic Review with Meta-Analysis aimed to evaluate the accuracy of Temporomandibular Disorders diagnosis considered through the Diagnostic Criteria for Temporomandibular Disorder (DC/TDM) axis II compared to the Axis I evaluations. METHODS: A search was made in PubMed, Web of Science and Lilacs for articles published from the inception until 20 January 2023. We applied the Population, Exposure, Comparator, and Outcomes (PECO) model [1] to assess document eligibility. Only studies that evaluated patients by DC/TMD Axis I and Axis II were considered. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the odds ratio (OR) between the two groups (Axis I and Axis II). RESULTS: Fifty-one articles were selected because of the search. Four papers were excluded before the screening: 2 pieces were not in English, and two were reviewed. The remaining 47 articles were selected for the title and abstract screening to evaluate whether they met the PECO criteria. Among these, four papers were established; the overall effect showed that there was no difference in TMD diagnosis between Axis I and Axis II (RR 1.17; 95% CI: 0.80- 1.71; Z:0.82; P = .41), suggesting that there is no difference between Axis I and Axis II. CONCLUSION: In conclusion, DC/TMD is an effective tool for the diagnosis of TMD. It improves the accuracy of TMD diagnosis, allows for the classification of subtypes, and assesses psychosocial factors that may impact the development or maintenance of TMD symptoms.

Medium-term effects of rapid maxillary expansion on nasal cavity and pharyngeal airway volumes considering age as a factor: A retrospective study.

OBJECTIVES: The medium-term effects of rapid maxillary expansion (RME) on nasal cavity (NC) and upper airway (UA) dimensions based on chronological age are still unclear. This retrospective study evaluated the medium-term changes occurring in the NC and pharyngeal airways (PA) after RME in two distinct age-based cohorts of patients. METHODS: This retrospective study included 48 subjects who underwent RME grouped in two cohorts: a 6-9-year-old group (EEG group: early expansion group - 25 subjects) and an 11-14-year-old group (LEG group: late expansion group - 23 subjects). NC and PA volumes were analyzed from CBCT imaging segmentation before RME (T0) and twelve months after RME (T1). The amount of maxillary expansion (PW) and minimal cross-sectional area (CSmin) were also considered. RESULTS: All PAs' volumetric sub-regions, CSmin and PW showed a significant volumetric increment (p < 0.05). Inter-group comparisons showed significant differences (p < 0.05) for nasopharynx and CSmin parameters (p < 0.05), while no significant changes were recorded for the other UA's sub-regions and PW (p > 0.05). According to a deviation analysis, part of the UA increase (more marked for the nasopharynx area) may have occurred due to reduced adenotonsillar tissues, which were larger in the EEG group. CONCLUSIONS: Twelve months after treatment, clinicians should not expect changes in the UAs dimensions to be solely related to treatment effects of RME; instead, normal craniofacial growth changes and spontaneous regression of the adenotonsillar tissue could represent the most significant factors influencing UAs changes. CLINICAL SIGNIFICANCE: From the clinical perspective, the results of the present study encourage caution when considering the therapeutic effects of RME on airways dimensions.

Survivability of endodontically treated cracked tooth: A systematic review.

BACKGROUND: Literature evidence describes various treatment protocols that have been employed for the effectiveness in improving survival and addressing associated symptoms of cracked teeth. OBJECTIVE: This systematic review investigates the survivability of endodontically treated cracked teeth and associated assessments, focusing on various treatment protocols. METHODS: The PRISMA guidelines were utilised for guiding the article selection framework of this review. A comprehensive search of relevant literature was conducted in May 2023 across various databases, and studies meeting the inclusion criteria were selected. Data extraction, guided by a standardized form, captured crucial details, including study characteristics, treatment protocols, and treatment outcomes, enhancing the consistency and accuracy of information collection. Data extraction and synthesis was done by two reviewers independently. The Newcastle Ottawa tool was used to measure the methodological quality of the study. Six observational studies were eventually included. RESULTS: Mandibular molars are particularly prone to developing cracks, with research indicating a heightened susceptibility to this dental issue. Studies reveal that endodontically treated cracked teeth boast robust overall survival rates ranging from 75.8% to 100%. The risk of bias assessment, utilizing the Newcastle Ottawa scale, indicated a moderate risk across studies, highlighting the necessity for careful interpretation of findings. CONCLUSION: Endodontically treated cracked teeth show marked success in survival, with the incorporation of crowns post-endodontic treatment significantly enhancing longevity and resilience.

Prediction of interactomic hub genes in PBMC cells in type 2 diabetes mellitus, dyslipidemia, and periodontitis.

BACKGROUND AND OBJECTIVE: In recent years, the complex interplay between systemic health and oral well-being has emerged as a focal point for researchers and healthcare practitioners. Among the several important connections, the convergence of Type 2 Diabetes Mellitus (T2DM), dyslipidemia, chronic periodontitis, and peripheral blood mononuclear cells (PBMCs) is a remarkable example. These components collectively contribute to a network of interactions that extends beyond their domains, underscoring the intricate nature of human health. In the current study, bioinformatics analysis was utilized to predict the interactomic hub genes involved in type 2 diabetes mellitus (T2DM), dyslipidemia, and periodontitis and their relationships to peripheral blood mononuclear cells (PBMC) by machine learning algorithms. MATERIALS AND METHODS: Gene Expression Omnibus datasets were utilized to identify the genes linked to type 2 diabetes mellitus(T2DM), dyslipidemia, and Periodontitis (GSE156993).Gene Ontology (G.O.) Enrichr, Genemania, and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were used for analysis for identification and functionalities of hub genes. The expression of hub D.E.G.s was confirmed, and an orange machine learning tool was used to predict the hub genes. RESULT: The decision tree, AdaBoost, and Random Forest had an A.U.C. of 0.982, 1.000, and 0.991 in the R.O.C. curve. The AdaBoost model showed an accuracy of (1.000). The findings imply that the AdaBoost model showed a good predictive value and may support the clinical evaluation and assist in accurately detecting periodontitis associated with T2DM and dyslipidemia. Moreover, the genes with p-value < 0.05 and A.U.C.>0.90, which showed excellent predictive value, were thus considered hub genes. CONCLUSION: The hub genes and the D.E.G.s identified in the present study contribute immensely to the fundamentals of the molecular mechanisms occurring in the PBMC associated with the progression of periodontitis in the presence of T2DM and dyslipidemia. They may be considered potential biomarkers and offer novel therapeutic strategies for chronic inflammatory diseases.

Evaluation and assessment of the survival of tooth implant supported prosthesis in tooth and implant supported rehabilitation cases with metal frameworks.

INTRODUCTION: Over the years, implant therapy has been a commonly used treatment option for individuals who are partially or totally edentulous, with a long-term success rate of over 90%. With significant advancements in biomaterials and technology, implant dentistry can now conduct prosthetic rehabilitations in the majority of patients catering to all types of needs. However, in order to meet the demands of a patient base that is always growing, new trends in implantology are emerging in recent years that are focused on minimally invasive surgery and financial sustainability. In certain clinical scenarios, connecting teeth and implants to support fixed partial prosthesis (FPPs) may be a predictable and workable course of treatment. MATERIALS AND METHODS: 22 patients were selected for this study who had tooth and implant supported prosthesis placed as a final restoration. Out of these 22 patients; 12 were male and 10 were female patients. Implants were placed following proper protocol and if grafting procedures were required they were carried out. A second stage surgical procedure was carried out and delayed loading protocols were followed. The statistical analysis was done using the IBM SPSS 24.0, Chicago, USA. The survival of the implants and teeth were measured by the Kaplan Meier survival scale. Bone loss was assessed at baseline(upon loading), 12 months and 24 months. RESULTS: The implant survival rate was measured at 6 months, 12 months, 18 months and 24 months. At 24 months, one implant showed failure, so the survival rate of the implants were 95.4%. Bone loss of 1 mm was seen around one implant at 12 months. Bone loss of 1 and 2 mm was present around two implants and one implant respectively at 24 months. CONCLUSION: From the results of this study, we can conclude that tooth implant supported prosthesis show very good survival when used in rehabilitation cases.

Prevalence of obstructive sleep apnoea syndrome in oncological patients: A systematic review and meta-analysis.

BACKGROUND: Obstructive sleep apnoea syndrome (OSAS) has garnered increasing attention in recent years due to its potential association with cancer. This systematic review and meta-analysis aimed to assess the prevalence of OSAS in cancer patients through a comprehensive analysis of existing literature. METHODS: This systematic review and meta-analysis, conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol, aimed to evaluate the prevalence of OSAS in cancer patients. A comprehensive search of electronic databases was performed to identify relevant studies published up to September 2021. Eligible studies reporting on the prevalence of OSAS in cancer patients, encompassing various study designs, were included in the analysis. Pooled estimates of the odds ratios (OR) with 95% confidence intervals (CIs) were calculated using a random effects model. Heterogeneity among the studies was assessed using the I2 statistic. RESULTS: Seventeen studies fulfilled the inclusion criteria and were subsequently included in the review. The prevalence of OSAS in cancer patients was estimated to have an overall OR of 0.80 (95% CI: 0.75-0.85). In comparison with non-cancer patients, cancer patients had a statistically significant greater risk of OSAS, as indicated by the total estimated RR for the prevalence of OSAS in cancer patients, which was 0.89 (95% CI: 0.86-0.92). Nonetheless, there was a significant amount of heterogeneity (I2 = 96%) among the studies. CONCLUSION: The overall data analysed in this review indicates that patients with cancer had far reduced likelihood of developing OSAS than individuals without cancer. However, the significant variation across the included studies highlights the need for additional investigation to fully clarify the complex association between OSAS and cancer incidence. These results emphasise how critical it is to identify OSAS as a possible comorbidity in cancer patients, one that should be taken into account for clinical management and ongoing research.

Pregnancy related factors and temporomandibular disorders evaluated through the diagnostic criteria for temporomandibular disorders (DC/TMD) axis II: a cross sectional study.

INTRODUCTION: Temporomandibular disorder (TMD) is a multifaceted condition impacting the chewing system, with its frequency varying across different age groups and showing a higher incidence in women. The involvement of estrogen in TMD has been examined due to the presence of estrogen receptors in the TMJ area. However, the exact effect of estrogen on TMD is complex. During pregnancy, marked by significant hormonal fluctuations, the impact on TMD has been hypothesized but remains unclear due to inconsistent results from various studies. METHODS: In this cross-sectional study, we enrolled 32 pregnant women consecutively. We gathered information on demographics, TMD evaluations (using the Graded Chronic Pain Scale, Jaw Functional Limitation Scale-20, and Oral Behaviors Checklist), and mental health assessments (including Patient Health Questionnaire-9, Patient Health Questionnaire-15, and Generalized Anxiety Disorder-7). We employed descriptive statistics to summarize continuous and categorical data and used t-tests and chi-square tests for comparisons. We also conducted multivariate linear regression, adjusted for demographic factors, to investigate correlations. RESULTS: The study group mainly consisted of women aged 30-35 (40.6%) and 25-30 (18.8%). Most participants had completed high school (50%) and were married (71.9%). A notable association was found between younger women (under 30) and higher levels of somatic symptoms (p = 0.008) and generalized anxiety (p = 0.015). Women in their second trimester showed lower severity of somatic symptoms (p = 0.04). A significant link was also observed between depression severity and somatic symptom severity (p = 0.01). However, we found no significant correlations with other TMD-related health aspects. DISCUSSION: Our study identified significant associations between psychosomatic and psychological symptoms with variables like age and pregnancy trimester in pregnant women. However, it notably failed to establish a clear relationship between pregnancy-related factors and the severity of temporomandibular disorders (TMD). More comprehensive studies with larger participant pools are necessary to further validate and expand these findings.

Prenatal incidence of cleft lip/palate and cocaine abuse in parents: a systematic review and meta-analysis.

BACKGROUND: The study aimed to investigate the association between maternal cocaine abuse during pregnancy and the prevalence of cleft lip/palate (CL/P) in offspring, synthesizing existing evidence through a systematic review and meta-analysis. CL/P is a congenital craniofacial anomaly with complex etiology, and prior research has suggested potential links between maternal cocaine use and CL/P. However, these associations remain inconclusive. METHODS: A comprehensive literature search was conducted to identify relevant studies published up to the study's cutoff date in September 2021. Several databases were systematically searched using predefined search terms. Inclusion criteria were set to encompass studies reporting on the prevalence of CL/P in infants born to mothers with a history of cocaine use during pregnancy, with a comparison group of non-cocaine-using mothers. Data were extracted, and a meta-analysis was performed using a random-effects model to calculate pooled odds ratios (OR) and relative risks (RR) with their respective 95% confidence intervals (CI). RESULTS: The review included data from 4 studies that met the inclusion criteria. The combined OR from two studies was 0.05 (95% CI: 0.00, 4.41), which does not suggest a statistically significant association between prenatal cocaine exposure and the incidence of CL/P due to the confidence interval crossing the null value. Additionally, the combined RR was 0.17 (95% CI: 0.04, 0.66), indicating a statistically significant decrease in the risk of CL/P associated with prenatal cocaine exposure. These results, with an OR that is not statistically significant and an RR suggesting decreased risk, should be interpreted with caution due to considerable heterogeneity and variability among the included studies' findings. Further research is needed to clarify these associations. CONCLUSION: The findings from this systematic review and meta-analysis suggest that maternal cocaine use during pregnancy is not a statistically significant independent risk factor for the development of CL/P in offspring. These results underscore the multifactorial nature of CL/P etiology and emphasize the importance of considering other genetic, environmental, and nutritional factors in understanding the condition's origins. While the study provides important insights, limitations such as data heterogeneity and potential confounders should be acknowledged. Future research should adopt rigorous study designs and explore a broader range of potential risk factors to comprehensively elucidate CL/P development.

Dental implant survival in epidermolysis bullosa patients: A systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions.

Background: Epidermolysis bullosa (EB) is a genetic syndrome afflicting skin and mucous membranes. The manifestation depends on the form: in mild conditions, occasionally, vesicular-bullous lesions of the oral cavity may be present, which heal spontaneously without leaving scars. Patients following joint rupture have scars that limit food intake and restrict quality of life. This study aims to evaluate the possibility of carrying out an implant therapy and the success rate of this therapy. Methods: Until January 3, 2000, PubMed, Web of Science, and Lilacs were searched. Clinical studies were selected that considered implant therapy in patients with epidermolysis bullosa. Articles were therefore selected that addressed oral health and implant survival in patients with epidermolysis, with no differentiation between the various subtypes. A risk of bias assessment was performed through Cochrane. Results: Twenty-one studies were found after the investigation. Only five were chosen to create the current systematic study; 16 articles were skipped over. 10 papers were disregarded because they had been reviewed; 4 were ignored because they contained case studies; and two were omitted because they were not written in English. The results show that implant survival is at around 97%. Conclusions: Patients with epidermolysis bullosa can be treated with implant therapy without the risk of an increased implant failure rate. Indicate the main conclusions or interpretations.

Evaluation and assessment of the wettabilty and water contact angle of modified poly methyl methacrylate denture base materials against PEEK in cast partial denture framework: an in vitro study.

INTRODUCTION: The prevalence of adults with partially dental arches is expected to be more than imagined and patients requiring replacement of missing teeth are slowly increasing in number too. Removable partial dentures are known to provide for substantial replacement for the missing teeth with also added advantages when compared to fixed or implant prosthesis, mainly in elderly patients. Denture base material performance and durability are greatly influenced by wettability and water contact angle. In the case of dentures; adequate moisture distribution is necessary to ensure excellent wettability which has an influence on comfort and oral health. The purpose of conducting this study was to find out whether the advancements made using PEEK (Polyether ether ketone) would prove to be more beneficial than the current upgrades in the current material spectrum. MATERIALS AND METHODS: This study was performed under in vitro conditions. All the fabrication and processing was done only by one operator. The materials used were divided into three groups each comprising 20 samples. Group A was modified polymethylmethacrylate (Bredent Polyan), Group B was polyoxymethylene acetal resin (Biodentaplast) and Group C was PEEK. An Ossila Goniometer was used to measure the contact angle. The three types of liquids used for the testing included distilled water, natural saliva and mouth wetting solution (Wet Mouth Liquid, ICPA India). Human saliva was collected from an individual with no medical conditions and normal salivary secretion. RESULTS: The data was analyzed using One-way ANOVA test and a pairwise comparison using the Post Hoc Tukey's Honest Significant Difference. Table 1 consists of the mean water contact angles of the denture base materials and mean contact angles of various denture base materials. In saliva, mouth wetting solution and distilled water, the highest mean and least mean contact angle was seen in Polyan and Biodentaplast respectively. A signicant difference was seen between PEEK and Polyan and Biodentaplast and Polyan on further comparison. CONCLUSION: From the resources and the materials at our disposal, it could be concluded that Polyan, Biodentaplast and PEEK and could be used as viable options in cast partial denture framework.

Applications of artificial intelligence in the utilisation of imaging modalities in dentistry: A systematic review and meta-analysis of in-vitro studies.

Background: In the past, dentistry heavily relied on manual image analysis and diagnostic procedures, which could be time-consuming and prone to human error. The advent of artificial intelligence (AI) has brought transformative potential to the field, promising enhanced accuracy and efficiency in various dental imaging tasks. This systematic review and meta-analysis aimed to comprehensively evaluate the applications of AI in dental imaging modalities, focusing on in-vitro studies. Methods: A systematic literature search was conducted, in accordance with the PRISMA guidelines. The following databases were systematically searched: PubMed/MEDLINE, Embase, Web of Science, Scopus, IEEE Xplore, Cochrane Library, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and Google Scholar. The meta-analysis employed fixed-effects models to assess AI accuracy, calculating odds ratios (OR) for true positive rate (TPR), true negative rate (TNR), positive predictive value (PPV), and negative predictive value (NPV) with 95 % confidence intervals (CI). Heterogeneity and overall effect tests were applied to ensure the reliability of the findings. Results: 9 studies were selected that encompassed various objectives, such as tooth segmentation and classification, caries detection, maxillofacial bone segmentation, and 3D surface model creation. AI techniques included convolutional neural networks (CNNs), deep learning algorithms, and AI-driven tools. Imaging parameters assessed in these studies were specific to the respective dental tasks. The analysis of combined ORs indicated higher odds of accurate dental image assessments, highlighting the potential for AI to improve TPR, TNR, PPV, and NPV. The studies collectively revealed a statistically significant overall effect in favor of AI in dental imaging applications. Conclusion: In summary, this systematic review and meta-analysis underscore the transformative impact of AI on dental imaging. AI has the potential to revolutionize the field by enhancing accuracy, efficiency, and time savings in various dental tasks. While further research in clinical settings is needed to validate these findings and address study limitations, the future implications of integrating AI into dental practice hold great promise for advancing patient care and the field of dentistry.

A scanning electron microscopy investigation of the precision of three orthodontic bracket slot systems.

OBJECTIVE: One of the most imprortant factors in achieving ideal teeth positions is the precision of the slot dimensions of orthodontic brackets into the archwires are inserted.This study aimed to assess the accuracy of the dimensions of orthodontic bracket slots and molar buccal tube apertures and to compare them with the specifications provided by the manufacturers. METHOD: A total of sixty brackets and ten molar buccal tubes with varying slot heights were examined using a scanning electron microscope from the mesial side. The dimensions and morphology of these bracket slots and buccal tubes apertures were assessed using the AutoCAD Software. A one-sample t-test was conducted to compare the measurements with the values provided by the manufacturer. RESULTS: The findings of the present study indicated that the height of the measured bracket slots and buccal tube apertures dimensions were significantly larger than the actual dimensions and exhibiting divergent walls. On the other hand, the depth of the brackets slots showed significantly smaller values than the actual one. CONCLUSION: A need for careful consideration when selecting a commercially accessible brand for everyday use is essential as certain materials may not meet acceptable standards.

The effectiveness of chitosan as a hemostatic in dentistry in patients with antiplatelet/anticoagulant therapy: systematic review with meta-analysis.

Hemorrhage control is a crucial aspect of dental procedures, and achieving efficient hemostasis remains a key challenge. The advent of hemostatic dressings has revolutionized the field of dentistry by providing effective and convenient solutions for managing bleeding in vari-ous dental scenarios. This article aims to provide an overview of hemostatic dressings, their mechanisms of action, and their diverse applications in dentistry. We applied the following Pop-ulation, Exposure, Comparator, and Outcomes (PICO) model to assess the document eligibility. A literature search was performed on major search engines, using keywords. At the end of the search, 3 articles were selected that matched the PICO. Three items were selected after the screen-ing process, and bleeding times were analyzed between the control group and the study group. The overall effect showed a substantial and statistically significant difference with bleeding time in favour of HDD-treated patients, showing that this garrison is very useful in controlling bleed-ing for patients taking anticoagulants and antiplatelets (Mean difference - 5.61; C.I. -5.70, - 5.52); Overall, hemostatic dressings have revolutionized the management of bleeding in dentistry, offering a promising solution to achieve optimal hemostasis, improve treatment outcomes, and enhance patient care, particularly Hemcon.

A comparative evaluation of physical properties of CAD/CAM complete denture resins- an in vitro study.

BACKGROUND: In dentistry, there is a growing preference for computer-aided design and computer-aided manufacturing (CAD/CAM) systems over traditional laboratory procedures. However, there is not much literature comparing various CAD/CAM materials. Thus, this study aimed to assess and compare the color stability and hardness of gingival and tooth colored milled and 3D-printed acrylic resins. MATERIALS AND METHODS: Four types of CAD/CAM materials were prepared: 3D-printed pink shade (PP), milled polymenthymethacrylate (PMMA) pink shade (MP), 3D-printed tooth shade (PT) and milled PMMA tooth shade (MT) (n = 6). For hardness, disc shaped samples of 15 mm × 2 mm and for color stability, bar shaped samples of 65mmx10mmx2.5 mm were prepared and polished. Vickers hardness test was performed in a microhardness tester. Color stability test was done by immersing in coffee solution and coca cola for 7 days. Day 0 and day 7 measurements were recorded using a digital spectrophotometer and the change in color was calculated. For statistical analysis, one-way ANOVA and Tukey's post hoc tests were done. RESULTS: For color stability, milled PMMA was superior to 3D-printed resin samples. Milled pink and tooth shade samples had similar color stability, whereas 3D-printed tooth shade samples were more color stable as compared to pink shade 3D-printed samples. For hardness, milled tooth shade PMMA was the most superior one, followed by 3D-printed tooth shade, whereas pink shade milled PMMA and 3D-printed resin samples had similar hardness values and were inferior to the tooth shade CAD/CAM materials. CONCLUSION: Color stability of milled PMMA is superior to that of 3D-printed resins. Hardness of tooth shade milled and 3D-printed resins is more than that of pink shade milled and 3D-printed resins.