Association of the pr peptides with dengue virus at acidic pH blocks membrane fusion.

Flavivirus assembles into an inert particle that requires proteolytic activation by furin to enable transmission to other hosts. We previously showed that immature virus undergoes a conformational change at low pH that renders it accessible to furin (I. M. Yu, W. Zhang, H. A. Holdaway, L. Li, V. A. Kostyuchenko, P. R. Chipman, R. J. Kuhn, M. G. Rossmann, and J. Chen, Science 319:1834-1837, 2008). Here we show, using cryoelectron microscopy, that the structure of immature dengue virus at pH 6.0 is essentially the same before and after the cleavage of prM. The structure shows that after cleavage, the proteolytic product pr remains associated with the virion at acidic pH, and that furin cleavage by itself does not induce any major conformational changes. We also show by liposome cofloatation experiments that pr retention prevents membrane insertion, suggesting that pr is present on the virion in the trans-Golgi network to protect the progeny virus from fusion within the host cell.

Structure and morphogenesis of bacteriophage T4.

Bacteriophage T4 is one of the most complex viruses. More than 40 different proteins form the mature virion, which consists of a protein shell encapsidating a 172-kbp double-stranded genomic DNA, a 'tail,' and fibers, attached to the distal end of the tail. The fibers and the tail carry the host cell recognition sensors and are required for attachment of the phage to the cell surface. The tail also serves as a channel for delivery of the phage DNA from the head into the host cell cytoplasm. The tail is attached to the unique 'portal' vertex of the head through which the phage DNA is packaged during head assembly. Similar to other phages, and also herpes viruses, the unique vertex is occupied by a dodecameric portal protein, which is involved in DNA packaging.

Interaction of coxsackievirus B3 with the full length coxsackievirus-adenovirus receptor.

Group B coxsackieviruses (CVB) utilize the coxsackievirus-adenovirus receptor (CAR) to recognize host cells. CAR is a membrane protein with two Ig-like extracellular domains (D1 and D2), a transmembrane domain and a cytoplasmic domain. The three-dimensional structure of coxsackievirus B3 (CVB3) in complex with full length human CAR and also with the D1D2 fragment of CAR were determined to approximately 22 A resolution using cryo-electron microscopy (cryo-EM). Pairs of transmembrane domains of CAR associate with each other in a detergent cloud that mimics a cellular plasma membrane. This is the first view of a virus-receptor interaction at this resolution that includes the transmembrane and cytoplasmic portion of the receptor. CAR binds with the distal end of domain D1 in the canyon of CVB3, similar to how other receptor molecules bind to entero- and rhinoviruses. The previously described interface of CAR with the adenovirus knob protein utilizes a side surface of D1.

Molecular replacement--historical background.

A review is given of the mathematical procedures required for a molecular-replacement structure determination. These apply equally to the more frequently encountered situations where a known homologous structure can be used as a search model and to phase determination in the presence of non-crystallographic symmetry (NCS). In general, the former represents improper NCS between two different unit cells, whereas the latter occurs when there is proper NCS within one unit cell.

Cryoelectron-microscopy image reconstruction of symmetry mismatches in bacteriophage phi29.

A method has been developed for three-dimensional image reconstruction of symmetry-mismatched components in tailed phages. Although the method described here addresses the specific case where differing symmetry axes are coincident, the method is more generally applicable, for instance, to the reconstruction of images of viral particles that deviate from icosahedral symmetry. Particles are initially oriented according to their dominant symmetry, thus reducing the search space for determining the orientation of the less dominant, symmetry-mismatched component. This procedure produced an improved reconstruction of the sixfold-symmetric tail assembly that is attached to the fivefold-symmetric prolate head of phi29, demonstrating that this method is capable of detecting and reconstructing an object that included a symmetry mismatch. A reconstruction of phi29 prohead particles using the methods described here establishes that the pRNA molecule has fivefold symmetry when attached to the prohead, consistent with its proposed role as a component of the stator in the phi29 DNA packaging motor.

Structure determination of the head-tail connector of bacteriophage phi29.

The head-tail connector of bacteriophage phi29 is composed of 12 36 kDa subunits with 12-fold symmetry. It is the central component of a rotary motor that packages the genomic dsDNA into preformed proheads. This motor consists of the head-tail connector, surrounded by a phi29-encoded, 174-base, RNA and a viral ATPase protein, both of which have fivefold symmetry in three-dimensional cryo-electron microscopy reconstructions. DNA is translocated into the prohead through a 36 A diameter pore in the center of the connector, where the DNA takes the role of a motor spindle. The helical nature of the DNA allows the rotational action of the connector to be transformed into a linear translation of the DNA. The crystal structure determination of connector crystals in space group C2 was initiated by molecular replacement, using an approximately 20 A resolution model derived from cryo-electron microscopy. The model phases were extended to 3.5 A resolution using 12-fold non-crystallographic symmetry averaging and solvent flattening. Although this electron density was not interpretable, the phases were adequate to locate the position of 24 mercury sites of a thimerosal heavy-atom derivative. The resultant 3.2 A single isomorphous replacement phases were improved using density modification, producing an interpretable electron-density map. The crystallographically refined structure was used as a molecular-replacement model to solve the structures of two other crystal forms of the connector molecule. One of these was in the same space group and almost isomorphous, whereas the other was in space group P2(1)2(1)2. The structural differences between the oligomeric connector molecules in the three crystal forms and between different monomers within each crystal show that the structure is relatively flexible, particularly in the protruding domain at the wide end of the connector. This domain probably acts as a bearing, allowing the connector to rotate within the pentagonal portal of the prohead during DNA packaging.

Interaction of coxsackievirus A21 with its cellular receptor, ICAM-1.

Coxsackievirus A21 (CAV21), like human rhinoviruses (HRVs), is a causative agent of the common cold. It uses the same cellular receptor, intercellular adhesion molecule 1 (ICAM-1), as does the major group of HRVs; unlike HRVs, however, it is stable at acid pH. The cryoelectron microscopy (cryoEM) image reconstruction of CAV21 is consistent with the highly homologous crystal structure of poliovirus 1; like other enteroviruses and HRVs, CAV21 has a canyon-like depression around each of the 12 fivefold vertices. A cryoEM reconstruction of CAV21 complexed with ICAM-1 shows all five domains of the extracellular component of ICAM-1. The known atomic structure of the ICAM-1 amino-terminal domains D1 and D2 has been fitted into the cryoEM density of the complex. The site of ICAM-1 binding within the canyon of CAV21 overlaps the site of receptor recognition utilized by rhinoviruses and polioviruses. Interactions within this common region may be essential for triggering viral destabilization after attachment to susceptible cells.

Combining electron microscopic with x-ray crystallographic structures.

Analgorithm has been developed for placing three-dimensional atomic structures into appropriately scaled cryoelectron microscopy maps. The first stage in this process is to conduct a three-dimensional angular search in which the center of gravity of an X-ray crystallographically determined structure is placed on a selected position in the cryoelectron microscopy map. The quality of the fit is measured by the sum of the density at each atomic position. The second stage is to refine the three angles and three translational parameters for the best (usually 25 to 100) fits. Useful criteria for this refinement include the sum of densities at atomic sites, the lack of atoms in negative or low density, the absence of atomic clashes between symmetry-related positions of the atomic structure, and the distances between identifiable features in the map and their positions on the fitted atomic structure. These refinements generally lead to a convergence of the originally chosen, top scoring fits to just a few (about 3 to 8) acceptable possibilities. Usually, the best remaining fit is clearly superior to any of the others.

Will the polio niche remain vacant?

C-Cluster enteroviruses (C-CEVs), consisting of Coxsackie A viruses (C-CAV1, 11, 13, 15, 17, 18, 19, 20, 21, 22, 24, 24v) and polioviruses (PV1, 2, 3), have been grouped together in relation to their genomic sequences. On the basis of disease syndromes caused in humans, however, C-CAVs and PVs are vastly different: the former cause respiratory disease, just like the major receptor group rhinoviruses (magHRV), whereas PVs, on invasion of the CNS, can cause poliomyelitis. It is assumed that the difference in pathogenesis of C-CEVs is governed predominantly by cellular receptor specificity. C-CAVs use ICAM-1, just like magHRV, whereas PVs uniquely use CD155. Both ICAM-1 and CD155 are Ig-like molecules. Remarkably, based on a phylogenetic analysis of non-structural proteins, CAV 11, 13, 17 and 18 are interleaved with, rather than separated from, the three PV serotypes, e.g. PV1 is more closely related to CAV18 that to PV2. This observation suggests that PVs may have emerged from a pool of C-CAVs by evolving a unique receptor specificity. We have been studying virion structure, virion/receptor interactions, genetics, and the molecular biology of C-CEVs with the objective of identifying the molecular basis of phenotypic diversity of these viruses. Of particular interest is the prospect that C-CEVs can be genetically manipulated to switch their receptor affinity: from CD155 to ICAM-1 for PVs, or from ICAM-1 to CD155 for C-CAVs. We propose a hypothesis that in a world free of poliovirus and anti-poliovirus neutralizing antibodies C-CAVs would be given a greater chance to switch receptor specificity from ICAM-1 to CD155 and thus, to evolve gradually into a new polio-like virus.

Structure of the bacteriophage phi29 DNA packaging motor.

Motors generating mechanical force, powered by the hydrolysis of ATP, translocate double-stranded DNA into preformed capsids (proheads) of bacterial viruses and certain animal viruses. Here we describe the motor that packages the double-stranded DNA of the Bacillus subtilis bacteriophage phi29 into a precursor capsid. We determined the structure of the head-tail connector--the central component of the phi29 DNA packaging motor--to 3.2 A resolution by means of X-ray crystallography. We then fitted the connector into the electron densities of the prohead and of the partially packaged prohead as determined using cryo-electron microscopy and image reconstruction analysis. Our results suggest that the prohead plus dodecameric connector, prohead RNA, viral ATPase and DNA comprise a rotary motor with the head-prohead RNA-ATPase complex acting as a stator, the DNA acting as a spindle, and the connector as a ball-race. The helical nature of the DNA converts the rotary action of the connector into translation of the DNA.

Fitting atomic models into electron-microscopy maps.

Combining X-ray crystallographically determined atomic structures of component domains or subunits with cryo-electron microscopic three-dimensional images at around 22 A resolution can produce structural information that is accurate to about 2.2 A resolution. In an initial step, it is necessary to determine accurately the absolute scale and absolute hand of the cryo-electron microscopy map, the former of which can be off by up to 5%. It is also necessary to determine the relative height of density by using a suitable scaling function. Difference maps can identify, for instance, sites of glycosylation, the position of which helps to fit the component structures into the EM density maps. Examples are given from the analysis of alphaviruses, rhinovirus-receptor interactions and poliovirus-receptor interactions.

Structure of bacteriophage T4 gene product 11, the interface between the baseplate and short tail fibers.

Bacteriophage T4, like all other viruses, is required to be stable while being transmitted from host to host, but also is poised to eject efficiently and rapidly its double-stranded DNA genome to initiate infection. The latter is coordinated by the recognition of receptors on Escherichia coli cells by the long tail fibers and subsequent irreversible attachment by the short tail fibers. These fibers are attached to the baseplate, a multi-subunit assembly at the distal end of the tail. Recognition and attachment induce a conformational transition of the baseplate from a hexagonal to a star-shaped structure. The crystal structure of gene product 11 (gp11), a protein that connects the short tail fibers to the baseplate, has been determined to 2.0 A resolution using multiple wavelength anomalous dispersion with Se. This structure is compared to the trimeric structure of gp9, which connects the baseplate with the long tail fibers. The structure of gp11 is a trimer with each monomer consisting of 218 residues folded into three domains. The N-terminal domains form a central, trimeric, parallel coiled coil surrounded by the middle "finger" domains. The fingers emanate from the carboxy-terminal beta-annulus domain, which, by comparison with the T4 whisker "fibritin" protein, is probably responsible for trimerization. The events leading from recognition of the host to the ejection of viral DNA must be communicated along the assembled trimeric (gp9)(3) attached to the long tail fibers via the trimeric baseplate protein (gp10)(3) to the trimeric (gp11)(3) and the trimeric short tail fibers.

Purification, crystallization and initial X-ray analysis of the head-tail connector of bacteriophage phi29.

The head-tail connector of bacteriophage phi29, an oligomer of gene product 10 (gp10), was crystallized into various forms. The most useful of these were an orthorhombic P22(1)2(1) form (unit-cell parameters a = 143.0, b = 157.0, c = 245.2 A), a monoclinic C2 form (a = 160.7, b = 143.6, c = 221.0 A, beta = 97.8 degrees ) and another monoclinic C2 form (a = 177.0, b = 169.1, c = 185.2 A, beta = 114.1 degrees ). Frozen crystals diffracted to about 3.2 A resolution. There is one connector per crystallographic asymmetric unit in each case. Rotation functions show the connector to be a dodecamer. Translation functions readily determined the position of the 12-fold axis in each unit cell. The structure is being determined by 12-fold electron-density averaging within each crystal and by averaging between the various crystal forms.

Host range and variability of calcium binding by surface loops in the capsids of canine and feline parvoviruses.

Canine parvovirus (CPV) emerged in 1978 as a host range variant of feline panleukopenia virus (FPV). This change of host was mediated by the mutation of five residues on the surface of the capsid. CPV and FPV enter cells by endocytosis and can be taken up by many non-permissive cell lines, showing that their host range and tissue specificity are largely determined by events occurring after cell entry. We have determined the structures of a variety of strains of CPV and FPV at various pH values and in the presence or absence of Ca(2+). The largest structural difference was found to occur in a flexible surface loop, consisting of residues 359 to 375 of the capsid protein. This loop binds a divalent calcium ion in FPV and is adjacent to a double Ca(2+)-binding site, both in CPV and FPV. Residues within the loop and those associated with the double Ca(2+)-binding site were found to be essential for virus infectivity. The residues involved in the double Ca(2+)-binding site are conserved only in FPV and CPV. Our results show that the loop conformation and the associated Ca(2+)-binding are influenced by the Ca(2+) concentration, as well as pH. These changes are correlated with the ability of the virus to hemagglutinate erythrocytes. The co-localization of hemagglutinating activity and host range determinants on the virus surface implies that these properties may be functionally linked. We speculate that the flexible loop and surrounding regions are involved in binding an as yet unidentified host molecule and that this interaction influences host range.

Structure and self-association of the Rous sarcoma virus capsid protein.

BACKGROUND: The capsid protein (CA) of retroviruses, such as Rous sarcoma virus (RSV), consists of two independently folded domains. CA functions as part of a polyprotein during particle assembly and budding and, in addition, forms a shell encapsidating the genomic RNA in the mature, infectious virus. RESULTS: The structures of the N- and C-terminal domains of RSV CA have been determined by X-ray crystallography and solution nuclear magnetic resonance (NMR) spectroscopy, respectively. The N-terminal domain comprises seven alpha helices and a short beta hairpin at the N terminus. The N-terminal domain associates through a small, tightly packed, twofold symmetric interface within the crystal, different from those previously described for other retroviral CAs. The C-terminal domain is a compact bundle of four alpha helices, although the last few residues are disordered. In dilute solution, RSV CA is predominantly monomeric. We show, however, using electron microscopy, that intact RSV CA can assemble in vitro to form both tubular structures constructed from toroidal oligomers and planar monolayers. Both modes of assembly occur under similar solution conditions, and both sheets and tubes exhibit long-range order. CONCLUSIONS: The tertiary structure of CA is conserved across the major retroviral genera, yet sequence variations are sufficient to cause change in associative behavior. CA forms the exterior shell of the viral core in all mature retroviruses. However, the core morphology differs between viruses. Consistent with this observation, we find that the capsid proteins of RSV and human immunodeficiency virus type 1 exhibit different associative behavior in dilute solution and assemble in vitro into different structures.

ICAM-1 receptors and cold viruses.

Human rhinoviruses (HRVs), the single most important etiologic agent of common colds, are small viruses composed of an icosahedral protein shell that encapsidates a single, positive RNA strand. Multiplication of HRVs occurs in the cytoplasm of the host cell. To produce infection, HRVs must first attach to specific cellular receptors embedded in the plasma membrane. Ninety percent of HRVs immunogenic variants use as receptor intercellular adhesion molecule-1 (ICAM-1), a cell surface glycoprotein that promotes intercellular signaling in processes derived from inflammation response. As HRV receptor, ICAM-1 positions the virus to within striking distance of the membrane, and then triggers a conformational change in the virus that ultimately results in delivery of the viral RNA genome into the cytoplasm, across a lipid bilayer. The interaction between ICAM-1 and HRVs has been analyzed by the combination of crystal structures of HRVs and ICAM-1 fragments with electron microscopy reconstructions of the complexes. The resulting molecular models are useful to address questions about receptor recognition, binding specificity, and mechanisms by which ICAM-1 induces virus uncoating.

Interaction of the poliovirus receptor with poliovirus.

The structure of the extracellular, three-domain poliovirus receptor (CD155) complexed with poliovirus (serotype 1) has been determined to 22-A resolution by means of cryo-electron microscopy and three-dimensional image-reconstruction techniques. Density corresponding to the receptor was isolated in a difference electron density map and fitted with known structures, homologous to those of the three individual CD155 Ig-like domains. The fit was confirmed by the location of carbohydrate moieties in the CD155 glycoprotein, the conserved properties of elbow angles in the structures of cell surface molecules with Ig-like folds, and the concordance with prior results of CD155 and poliovirus mutagenesis. CD155 binds in the poliovirus "canyon" and has a footprint similar to that of the intercellular adhesion molecule-1 receptor on human rhinoviruses. However, the orientation of the long, slender CD155 molecule relative to the poliovirus surface is quite different from the orientation of intercellular adhesion molecule-1 on rhinoviruses. In addition, the residues that provide specificity of recognition differ for the two receptors. The principal feature of receptor binding common to these two picornaviruses is the site in the canyon at which binding occurs. This site may be a trigger for initiation of the subsequent uncoating step required for viral infection.

Analysis of three structurally related antiviral compounds in complex with human rhinovirus 16.

Rhinoviruses are a frequent cause of the common cold. A series of antirhinoviral compounds have been developed that bind into a hydrophobic pocket in the viral capsid, stabilizing the capsid and interfering with cell attachment. The structures of a variety of such compounds, complexed with rhinovirus serotypes 14, 16, 1A, and 3, previously have been examined. Three chemically similar compounds, closely related to a drug that is undergoing phase III clinical trials, were chosen to determine the structural impact of the heteroatoms in one of the three rings. The compounds were found to have binding modes that depend on their electronic distribution. In the compound with the lowest efficacy, the terminal ring is displaced by 1 A and rotated by 180 degrees relative to the structure of the other two. The greater polarity of the terminal ring in one of the three compounds leads to a small displacement of its position relative to the other compounds in the hydrophobic end of the antiviral compound binding pocket to a site where it makes fewer interactions. Its lower efficacy is likely to be the result of the reduced number of interactions. A region of conserved residues has been identified near the entrance to the binding pocket where there is a corresponding conservation of the mode of binding of these compounds to different serotypes. Thus, variations in residues lining the more hydrophobic end of the pocket are primarily responsible for the differences in drug efficacies.