Smart Chemometric­Assisted Spectrophotometric Approaches for Simultaneous Quantification of Tertiary Combination Recommended for COVID-19 Supportive Treatments with Their Greenness Assessment.

BACKGROUND: There is an increasing interest of scientific community in developing innovative methodologies for their analysis needs within green analytical chemistry framework. UV spectrophotometry is one of the most promising eco-friendly methods, which is integrated with advanced chemometric tools to enhance the selectivity of the analysis of complex mixtures with severe overlapped signals. OBJECTIVES: Simultaneous determination of a triple-combination of pseudoephedrine hydrochloride (PSE), carbinoxamine maleate (CRX), and paracetamol (PAR) using an artificial intelligence system and multivariate calibration methods. This combination is recently recommended for COVID-19 home-treated patients as part of a symptomatic treatment. METHODS: Namely, the suggested models are: Artificial Neural Networks, Partial Least Squares, and Principal Component Regression. The proposed algorithms were optimized and developed with the aid of a five-level, three-factor experimental design. RESULTS: The investigated methods were applied over the concentration range of 100-180 µg/mL, 18-16 µg/mL, and 4-12 µg/mL for PSE, CRX, and PAR, respectively. The models validation results demonstrated excellent recoveries (around 98 to 102%), signaling the approaches outstanding resolution capacity for the cited compounds in the presence of common excipients. The outcomes of the studied methods were statistically compared to the official approaches, and no significant difference was found. CONCLUSION: The suggested models were efficiently employed to determine the selected drugs in their combined tablets without any initial separation steps. The impact of these methods on the environment was evaluated via greenness tools, namely; National Environmental Method Index, Raynie and Driver's green assessment method, analytical Eco-Scale, Green Analytical Procedure Index, and Analytical Greenness Metric. HIGHLIGHTS: Green chemometric quality assessment of PSE, CRX, and PAR in their pure and pharmaceutical dosage forms. The established approaches are innovative, sustainable, smart, fast, selective, and cost-effective. These models are potential green nominees for routine analysis of the investigated mixture in quality control laboratories.

Novel RP-HPLC-DAD approach for simultaneous determination of chlorphenoxamine hydrochloride and caffeine with their related substances.

Ensuring the quality control of active pharmaceutical ingredients is crucial for drug products being introduced into the market. Even for established drugs, it is necessary to maintain a cutting-edge impurity control system. To analyze caffeine and chlorphenoxamine hydrochloride in their binary mixture, as well as theophylline and chlorphenoxamine N-oxide as related substances, a reversed phase-high performance liquid chromatography combined with a diode array detector system was created. The chromatographic separation was conducted using a C18 X-select Waters® column. The mobile phase consisted of 20.0 mM potassium dihydrogen phosphate modified to pH 3 with o-phosphoric acid and methanol. A gradient elution program was adopted at a flow rate of 1.3 mL/min and detected at a wavelength of 222 nm. The present methodology demonstrates a concentration ranging from 2-60, 1-80, 0.5-20 to 0.4-20 µg/mL for chlorphenoxamine hydrochloride, caffeine, chlorphenoxamine N-Oxide and theophylline, respectively. Chlorphenoxamine N-Oxide, being an impurity of chlorphenoxamine was prepared by refluxing intact drug with 5% H2O2 for 24 h at 100 °C. One of the objectives of the analytical community is to promote the adoption of green analysis methods, which involve the development of environmentally friendly techniques. The levels of greenness and whiteness were evaluated using four specific tools: Eco-Scale System, GAPI, AGREE, and RGB tool. Furthermore, we have evaluated the greenness of the analytical method presented and compared its performance and greenness to that of the approach described in the literature. In this study, results from CPX and CAF analysis were compared to those obtained in a previous study. The result shows that there is no notable variation in precision and accuracy. The proposed method was validated in accordance with the requirements of ICH.

A novel green spectrofluorimetric method for simultaneous determination of antazoline and tetryzoline in their ophthalmic formulation.

A novel spectrofluorimetric method has been developed for determination of antazoline (ANT) and tetryzoline (TET) in their pharmaceutical formulation. A combined application of synchronous spectrofluorimetry and second derivative mathematical treatment was developed. The proposed method depends on reacting the cited drugs with dansyl chloride (DNS-Cl) being a suitable derivatizing agent generating highly fluorescent derivatives measured at emission wavelengths of 703.0 and 642.0 nm after excitation wavelengths of 350.0 and 320.0 nm for ANT and TET, respectively. The joint use of synchronous spectrofluorimetry with second derivative mathematical treatment is for the first time to be developed and optimized in aid of using fluorescence data manager software generating second derivative peak amplitudes at 556.5 nm for ANT and 516.7 nm for TET. Linear responses have been represented over a wide range of concentration (0.5-12.0 µg/mL for ANT and 0.5-10.0 µg/mL for TET). Additionally, statistical comparison of the developed method with the official ones has been carried out where no significant difference was found. Additionally, greenness profile assessment was accomplished by means of four metric tools. Indeed, the method developed is found to be precise, sensitive, and discriminating to assess the cited drugs for regular analysis.

A Novel Spectrofluorimetric Determination of Antazoline and Xylometazoline in their Ophthalmic Formulation; Green Approach and Evaluation.

A green developed spectrofluorimetric method has been applied for Antazoline (ANT) and Xylometazoline (XLO) determination in both pharmaceutical formulation and pure form. The developed method is synchronous spectrofluorimetry coupled with the second derivative mathematical tool for the determination of antazoline and xylometazoline in their dosage form. The developed method depends on reacting the cited drugs with dansyl chloride, a suitable derivatizing agent, to generate highly fluorescent derivatives. The products formed were measured at emission wavelengths; 703.0 and 712.0 nm after being excited at wavelengths; 350.0 and 355.0 nm for antazoline and xylometazoline, respectively. Synchronous spectrofluorimetry coupled with second derivative mathematical tool was developed and optimized using fluorescence data manager software generating second derivative peak amplitudes at 556.5 nm for antazoline and 598.0 nm for xylometazoline. Linear responses have been represented over a wide range of concentration 0.5-12.0 µg/mL for antazoline and 0.1-10.0 µg/mL for xylometazoline, correspondingly. Method validation was successfully applied. Additionally, statistical comparison of developed method with official ones has been carried out where no significant difference was found. Evaluation of the method's greenness was proven using several assessment tools. Indeed, the method developed is found to be precise, sensitive, and discriminating to assess the cited drugs for regular analysis.

Exquisite integration of quality-by-design and green analytical approaches for simultaneous determination of xylometazoline and antazoline in eye drops and rabbit aqueous humor, application to stability study.

This work implements a stability indicating HPLC method developed to simultaneously determine xylometazoline (XYLO) and antazoline (ANT) in their binary mixture, rabbit aqueous humor and cited drug's degradates by applying analytical quality-by-design (AQbD) combined with green analytical chemistry (GAC) experiment for the first time. This integration was designed to maximize efficiency and minimize environmental impacts, as well as energy and solvent consumption. Analytical quality-by-design was applied to achieve our aim starting with evaluation of quality risk and scouting analysis, tracked via five parameters chromatographic screening using Placket-Burman design namely: pH, temperature, organic solvent percentage, flow rate, and wavelength detection. Recognizing the critical method parameters was done followed by optimization employing central composite design and Derringer's desirability toward assess optimum conditions that attained best resolution with satisfactory peak symmetry with short run time. Optimal chromatographic separation was attained by means of an XBridge® C18 (4.6 × 250 mm, 5 µm) column through isocratic elution using a mobile phase consists of phosphate buffer (pH 3.0): ethanol (60:40, by volume) at a 1.6 mL/min flow rate and 230.0 nm UV detection. Linearity acquired over a concentration range of 1.0-100.0 µg/mL and 0.5-100.0 µg/mL for XYLO and ANT, respectively. Furthermore, imperiling cited drugs' stock solutions to stress various conditions and satisfactory peaks of degradation products were obtained indicating that cited drugs are vulnerable to oxidative degradation and basic hydrolysis. Degradates' structures were elucidated using mass spectrometry. Applying various assessment tools; namely: analytical greenness (AGREE), green analytical procedure index (GAPI), analytical eco-scale, and national environmental method index (NEMI), Greenness method's evaluation was applied and proved to be green. In fact, the developed method is established to be perceptive, accurate, and selective to assess cited drugs for routine analysis.

Green TLC-Densitometric Method for Simultaneous Determination of Antazoline and Tetryzoline: Application to Pharmaceutical Formulation and Rabbit Aqueous Humor.

Ophthalmic pharmaceutical preparation containing antazoline (ANT) and tetryzoline (TET) is prescribed widely as an over the counter medication for allergic conjunctivitis treatment. Development of a selective, simple and environmentally friendly thin-layer chromatographic method established to determine both ANT and TET in their pure forms, pharmaceutical formulation and spiked aqueous humor samples. By using silica gel plates and means of a developing system consists of ethyl acetate:ethanol (5:5, by volume), the studied drugs separation was achieved, and scanning was carried out at 220.0 nm for the separated bands with a 0.2-18.0 µg/band concentration range for each of ANT and TET. Standard addition technique application was carried out to determine the proposed method validity. Statistical comparison was made between the proposed method and the official methods ANT and TET showing no significant difference concerning accuracy and precision. Furthermore, greenness profile assessment was accomplished by means of four metric tools, namely, analytical greenness, green analytical procedure index, analytical eco-scale and national environmental method index.Highlights.

Spectrophotometric platform windows' exploitation for the green determination of Alcaftadine in presence of its oxidative degradation product.

This study presents the determination of Alcaftadine (ALF) in its oxidative degradation product presence by applying comprehensive study comparative of four different green stability indicating spectrophotometric approaches through successful exploitation of different spectrophotometric platform windows. Window I; based on absorption spectrum zero order data manipulation using the newly developed extended absorbance difference (EAD). Window II; based on derivative spectra by second order derivative (D2) data manipulation. Window III; based on ratio spectra applying constant multiplication (CM) and absorptivity centering via factorized ratio difference spectrum (ACT-FSRΔP) methods data manipulation. Finally, window IV; based on derivative of ratio spectrum by virtue of first derivative of ratio spectral (DD1) method data manipulation. Calibration curves construction were over linearity range; 1.0-14.0 µg/mL for ALF. The proposed methods accuracy, precision, and linearity range were determined and validated as per ICH guidelines. Moreover, they were able to analyze ALF in raw form, dosage form and in existence of its oxidative degradation product. Statistical comparisons were done between the proposed methods and the reported one showing no significant difference concerning accuracy and precision. Furthermore, greenness profile assessment was accomplished by means of four metric tools; namely: analytical greenness (AGREE), green analytical procedure index (GAPI), analytical eco-scale, and national environmental method index (NEMI).

Novel solid-contact ion-selective electrode based on a polyaniline transducer layer for determination of alcaftadine in biological fluid.

Fabrication of a novel ion selective electrode for determining alcaftadine was achieved. The glassy carbon electrode (GCE) was utilized as a substrate in fabrication of an electrochemical sensor containing polyaniline (PANI) as an ion-to-electron transducer layer. A PVC polymeric matrix and nitrophenyl-octyl-ether were employed in designing the ion-sensing membrane (ISM). Potential stability was improved and minimization of electrical signal drift was achieved for inhibition of water layer formation at the electrode interface. Potential stability was achieved by inclusion of PANI between the electronic substrate and the ion-sensing membrane. The sensor's performance was evaluated following IUPAC recommendations. The sensor dynamic linear range was from 1.0 × 10-2 to 1.0 × 10-6 mol L-1 and it had a 6.3 × 10-7 mol L-1 detection limit. The selectivity and capabilities of the formed alcaftadine sensor were tested in the presence of its pharmaceutical formulation excipients as well as its degradation products. Additionally, the sensor was capable of quantifying the studied drug in a rabbit aqueous humor. Method's greenness profile was evaluated by the means of Analytical Greenness (AGREE) metric assessment tool.

Novel Spectrophotometric Approaches for the Simultaneous Quantification of Ternary Common Cold Mixture Containing Paracetamol with a Challenging Formulation Ratio: Greenness Profile Evaluation.

BACKGROUND: Common cold and cough preparations represent a huge segment of the global pharmaceutical market. Recently, cold/cough formulations containing paracetamol (PAR) have attracted significant attention as PAR has been implemented into the supportive treatment of mild cases of COVID-19 as the first-line antipyretic. From a literature review, no method has been reported yet for simultaneous estimation of PAR, pseudoephedrine hydrochloride (PSE) and carbinoxamine maleate (CRX) in any matrix. Thus, there is an urgent need for smart and green methods that would enable quantification of the cited components in their challenging ratio. OBJECTIVES: The aim of this work is to develop and validate the first UV spectrophotometric methods for simultaneous determination of the selected drugs taking into consideration the list of challenges including the highly overlapping features and spectral interferences in the cited mixture. METHODS: Namely, the proposed methods are: direct spectrophotometry, dual wavelength, first derivative, derivative ratio, ratio difference, constant center coupled with spectrum subtraction, and the constant multiplication method paired with spectrum subtraction. RESULTS: These methods were linear over the concentration range of 2.5-35, 1.5-20, and 4.5-35 µg/mL for PAR, PSE and CRX, respectively. These methods fulfill the validity parameters according to International Conference on Harmonization (ICH) guidelines. The results obtained were statistically benchmarked to the official ones where no significant difference was noticed. CONCLUSION: The developed methods are successfully applied for concurrent quantification of the studied components in the marketed dosage form without interference from matrix excipients. The impact on the environment was assessed by five green metrics, namely a recent Analytical greenness (AGREE) metric algorithm based on the green analytical chemistry framework, Green Analytical Procedure Index (GAPI), Eco-Scale, Assessment of Green Profile (AGP), and National Environmental Methods Index (NEMI). HIGHLIGHTS: Eco-friendly and successive spectrophotometric methods were firstly developed in this work, for the simultaneous quantification of PAR, PSE and CRX. These approaches incorporate a simple enrichment-aided technique to augment their spectrophotometric signals, facilitating the accurate quantitation of the minor component in the cited mixture.

Fingerprinting and iso-absorptive resolution techniques for the spectrally overlapping Dutasteride and Silodosin mixture: Content uniformity testing along with greenness profile assessment.

The realm of spectrophotometric analysis has witnessed a remarkable progress in inventing faster and simpler resolution techniques for spectrally overlapping drug mixtures. Eco-friendly and progressive spectrophotometric methods were firstly developed in this work, for the simultaneous determination of Dutasteride (DUT) and Silodosin (SLD) in their newly-marketed dosage form. The proposed methods focused on the unique spectral features of this mixture including spectral extension of SLD over DUT spectrum as well as existence of iso-absorptive points. By such way, the methods were classified into two categories; the first one was "fingerprint resolution techniques" including constant extraction coupled with spectrum subtraction and ratio subtraction coupled with constant multiplication methods. The former represented a new modification to the classical constant extraction method where one divisor and lower steps were manipulated instead. The second category was "iso-absorptive resolution techniques", such as absorptivity centering, absorbance subtraction and amplitude modulation methods. Different solvents were investigated where ethanol was found to be the optimum one regarding drugs solubility, signal sensitivity and environmental, health & safety (EHS) score. Validity of the suggested methods was assessed as per ICH-guidelines and found to be linear over concentration ranges of 5.0-90.0 µg/mL for DUT and 5.0-120.0 µg/mL for SLD. The methods were successfully applied for quantifying the cited drugs in their combined dosage form and evaluating their content uniformity. Moreover, the insignificant statistical difference between the proposed methods and official HPLC ones encourages the utilization of such spectrophotometric methods as greener and faster candidates, especially in modest quality control laboratories. Methods' greenness profile was finally guaranteed through several assessment tools, namely; national environmental methods index (NEMI), analytical eco-scale, green analytical procedure index (GAPI) and analytical greenness (AGREE) metric.

Trade-off efficacy and data processing strategy in the power of spectral resolution of co-formulated antihypertensive pharmaceuticals.

Versatile, extraction-free univariate spectrophotometric methods have been modified to get effective spectral resolution of mixtures in accordance with their feature challenges. The proposed methods have been applied and validated for analyzing some antihypertensive medicines in their co-formulated medicinal products. Two mixtures have been used: the first one [Mix I (OLM/ADB)] is composed of Olmesartan medoxomil (OLM) and Amlodipine besylate (ADB) with partly-overlapped spectra while the second [Mix II (TEL/HCT)] is made up Telmisartan (TEL) and Hydrochlorothiazide (HCT) with total-overlapped spectra. Induced dual wavelength, absorbance correction and ratio subtraction coupled with constant multiplication methods were applied to Mix I (OLM/ADB), while dual wavelength, advanced absorbance subtraction and constant center coupled with spectrum subtraction methods were applied to Mix II (TEL/HCT). Calibration graphs were established with good correlation coefficients. The methods exhibit significant advantages as simplicity, sensitivity, minimal data manipulation besides optimum robustness. Selectivity was inspected using lab-mixtures with diverse ratios. Accuracy, precision and repeatability were found to be within the acceptable limits. The proposed methods are good enough to be used for co-assay of analytes in combined forms without any interfering from excipients. Moreover, all results were estimated in accordance with ICH criteria and successfully compared with those of the reported methods applying t-test and F-test at 95% confidence level. Generally, these methods can be used efficiently for routine quality control testing.

Novel feature extraction approach for achieving potential spectral resolution: Green analytical application on zofenopril calcium and hydrochlorothiazide in their spectrally overlapping binary mixture.

A novel and green spectrophotometric method, namely constant extraction, based on extracting a spectral feature value (constant ratio) has been developed and validated for simultaneous estimation of a binary mixture of zofenopril calcium (ZOF) and hydrochlorothiazide (HCT) in their bulk and marketable formulation. A comparative study between this newly developed method and four long-established ones; ratio difference, ratio subtraction coupled with constant multiplication, advanced amplitude modulation and absorbance subtraction has been carried out giving very promising results. Various analytical performance parameters like linearity, accuracy, precision, and robustness were investigated in accordance with ICH (Q2B). Satisfying optimized instrumental parameters; absorbance of ZOF and HCT were linearly increased for the previously mentioned methods in a concentration range 5.0-35.0 and 3.0-20.0 µg/mL, respectively showing correlation coefficients ≥0.9990. Moreover, specificity has been checked through analyzing synthetic mixtures of the studied analytes. Feasibility has been successfully assessed by simultaneous quantification of both analytes in the commercially available formulation. As well, validity was examined and no interference from common excipients was noticed. Observed data has been statistically compared with those of the published one concluding that no significant variations between both results have been indicated. Furthermore, greenness profile of these methods was assessed by analytical Eco-Scale and found superior to that of the reported HPLC method as an even greener approach for the simultaneous analysis of ZOF and HCT.

Developing spectral numerical factor technique for the determination of amlodipine besylate and the latest generation of statins in their new pharmaceutical combination.

Spectral numerical factor techniques have been developed for quantification of a new pharmaceutical combination. Five simple, fast and accurate spectrophotometric methods using spectral factor manipulation have been tested and validated so as to determine quantitatively a new fixed-dose combination tablet containing both amlodipine besylate (ADB) and rosuvastatin calcium (ROS). Namely, these methods are induced dual wavelength, absorbance correction, absorbance subtraction, amplitude correction and advanced amplitude subtraction. Their corresponding spectral factors are equality, absorption, absorbance, amplitude and unity factor, respectively. Calibration curves of ADB and ROS were set up for all the previously mentioned methods under the optimum conditions in a concentration range of 3.0-21.0 µg/mL with correlation coefficients ≥0.9990. Selectivity was calculated by analyzing laboratory-prepared synthetic blends of the cited drugs. A comparative study between these methods and the reported ones has been carried out statistically forming a judgment that the difference between both results is totally insignificant. Actually, the suggested spectral factor technique is so effective for use in routine laboratory essay owing to its simplicity, rapidity and precision. Generally, the proposed factor procedures have the ability to run smoothly without any interference from additives that may deteriorate analysis efficiency of a pharmaceutical combination.