2H-SnS2 assembled with petaloid 1T@2H-MoS2 nanosheet heterostructures for room temperature NO2 gas sensing.

In this study, we explored the gas-sensing capabilities of MoS2 petaloid nanosheets in the metallic 1T phase with the commonly investigated semiconducting 2H phase. By synthesizing SnS2 nanoparticles and MoS2 petaloid nanosheets through a hydrothermal method, we achieve notable sensing performance for NO2 gas at room temperature (27 °C). This investigation represents a novel study, and to the best of our knowledge no, prior similar investigations have been reported in the literature for 1T@2HMoS2/SnS2 heterostructures for room temperature NO2 gas sensing. The formed heterostructure between SnS2 nanoparticles and petaloid MoS2 nanosheets exhibits synergistic effects, offering highly active sites for NO2 gas adsorption, consequently enhancing sensor response. Our sensor demonstrated a remarkable sensing response (R a/R g = 7.49) towards 1 ppm of NO2, rapid response time of 54 s, baseline recovery in 345 s, good selectivity and long-term stability, underscoring its potential for practical gas-sensing applications.

2D/1D VSe2/MWCNT hybrid-based electrochemical sensor for carbendazim quantification of environmental, food, and biological samples.

For the first time the sensitive determination of carbendatim (CRB) is reported utilizing a well-designed sensing architecture based on vanadium diselenide-multiwalled carbon nanotube (VSMC). FTIR, XRD, FESEM, EDS, and EIS were employed to evaluate the sensor's structural integrity, and the results demonstrated the successful integration of nanomaterials, resulting in a robust and sensitive electrochemical sensor. Cyclic voltammetry (CV) and chronoamperometric (CA) investigations showed that the sensor best performed at pH 8.0 (BRB) with an excellent detection limit of 9.80 nM with a wide linear range of 0.1 to 10.0 µM. A more thermodynamically viable oxidation of CRB was observed at the VSMC/GCE, with a shift of 200 mV in peak potential towards the less positive side compared with the unmodified GCE. In addition, the sensor demonstrated facile heterogeneous electron transfer, favorable anti-fouling traits in the presence of a wide range of interferents, good stability, and reproducible analytical performance. Finally, the developed sensor was validated for real-time quantification of CRB from spiked water, food, and bio-samples, which depicted acceptable recoveries (98.6 to 101.5%) with RSD values between 0.35 and 2.23%. Further, to derive the possible sensing mechanism, the valence orbitals projected density of states (PDOS) for C, H, and N atoms of an isolated CRB molecule, VSe2 + CNT and VSe2 + CNT + CRB were calculated using density functional theory (DFT) calculations. The dominant charge transfer from the valence 2p-orbitals of the C and N atoms of CRB to CNT is responsible for the electrochemical sensing of CRB molecules.

Unveiling the Hidden Potential of Two-Dimensional Black Phosphorus for Advanced Supercapacitor Applications.

In response to the contemporary energy crisis, researchers have intensified efforts to explore green and renewable energy sources alongside developing robust energy storage devices. Supercapacitors stand out among various storage options due to their high-power density and rapid charge-discharge cycles. However, their lower energy density poses a challenge, leading to exploration of diverse electrode materials, including black phosphorus (BP). BP, with its two-dimensional (2D) layered structure akin to graphene, exhibits exceptional properties, making it a promising candidate for various applications, including energy storage. This Perspective focuses on the properties of BP as an electrode material for supercapacitors, covering electrochemical performance, charge storage mechanisms, and synthesis methods. Challenges such as restacking and stability have prompted innovative strategies to enhance BP-based supercapacitors, both qualitatively and quantitatively. Furthermore, the fabrication of BP-based hybrid nanocomposites with carbonaceous polymers, conducting polymers, and other 2D materials is discussed, highlighting their efficacy as electrode materials along with future outlooks.

Electrochemical Deposition for Cultivating Nano- and Microstructured Electroactive Materials for Supercapacitors: Recent Developments and Future Perspectives.

The globe is currently dealing with serious issues related to the world economy and population expansion, which has led to a significant increase in the need for energy. One of the most promising energy devices for the next generation of energy technology is the supercapacitor (SC). Among the numerous nanostructured materials examined for SC electrodes, inorganic nanosheets are considered to be the most favorable electrode materials because of their excellent electrochemical performance due to their large surface area, very low layer thickness, and tunable diverse composition. Various inorganic nanosheets (NS) such as metal oxides, metal chalcogenides, metal hydroxides, and MXenes show substantial electrochemical activity. Herein, a comprehensive survey of inorganic NS arrays synthesized through the electrodeposition method is reported with the discussion on detailed growth mechanism and their application in the fabrication of SC electrodes/devices for powering flexible and wearable electronics appliances. To begin with, the first section will feature the various types of electrodeposition working mechanism, SC types and their working mechanisms, importance of nanosheet structure for SCs. This review gives a profound interpretation of supercapacitor electrode materials and their performances in different domains. Finally, a perspective on NS array through electrodeposition method applications in diverse fields is extensively examined.

Correction: Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications.

[This corrects the article DOI: 10.1039/D0RA07800J.].

Recent Developments and Future Perspectives of Molybdenum Borides and MBenes.

Metal borides have received a lot of attention recently as a potentially useful material for a wide range of applications. In particular, molybdenum-based borides and MBenes are of great significance, due to their remarkable properties like good electronic conductivity, considerable stability, high surface area, and environmental harmlessness. Therefore, in this article, the progress made in molybdenum-based borides and MBenes in recent years is reviewed. The first step in understanding these materials is to begin with an overview of their structural and electronic properties. Then synthetic technologies for the production of molybdenum borides, such as high-temperature/pressure methods, physical vapor deposition (PVD), chemical vapor deposition (CVD), element reaction route, molten salt-assisted, and selective etching methods are surveyed. Then, the critical performance of these materials in numerous applications like energy storage, catalysis, biosensors, biomedical devices, surface-enhanced Raman spectroscopy (SERS), and tribology and lubrication are summarized. The review concludes with an analysis of the current progress of these materials and provides perspectives for future research. Overall, this review will offer an insightful reference for the understanding molybdenum-based borides and their development in the future.

Construction of Nickel Molybdenum Sulfide/Black Phosphorous 3D Hierarchical Structure Toward High Performance Supercapacitor Electrodes.

Supercapacitors (SCs) with outstanding versatility have a lot of potential applications in next-generation electronics. However, their practical uses are limited by their short working potential window and ultralow-specific capacity. Herein, the facile one-step in-situ hydrothermal synthesis is employed for the construction of a NiMo3S4/BP (black phosphorous) hybrid with a 3D hierarchical structure. After optimization, the NiMo3S4/BP hybrid displays a high specific capacitance of 830 F/g at 1 A/g compared to the pristine NiMo3S4 electrode. The fabricated NiMo3S4/BP//NiCo2S4/Ti3C2Tx asymmetric supercapacitor exhibits a better specific capacitance of 120 F/g at 0.5 A/g, which also demonstrates a high energy density of 54 Wh/kg at 1148.53 W/kg and good cycle stability with capacity retention of 86% and 97% of Coulombic efficiency after 6000 cycles. Further from the DFT simulations, the hybrid NiMo3S4/BP structure shows higher conductivity and quantum capacitance, which demonstrate greater charge storage capability, due to enhanced electronic states near the Fermi level. The lower diffusion energy barrier for the electrolyte K+ ions in the hybrid structure is facilitated by improved charge transfer performance for the hybrid NiMo3S4/BP. This work highlights the potential significance of hybrid nanoarchitectonics and compositional tunability as an emerging method for improving the charge storage capabilities of active electrodes.

Electrostatic co-assembly of FePS3 nanosheets and surface functionalized BCN heterostructures for hydrogen evolution reaction.

Advances in the hydrogen evolution reaction (HER) are intricately connected with addressing the current energy crisis and quest for sustainable energy sources. The necessity of catalysts that are efficient and inexpensive to perform the hydrogen evolution reaction is key to this. Following the ground-breaking discovery of graphene, metal thio/seleno phosphates (MPX3: M - transition metal, P - phosphorus and X - S/Se), two dimensional (2D) materials, exhibit excellent tunable physicochemical, electronic and optical properties, and are expected to be key to the energy industry for years to come. Taking this into account, a facile time-effective electrostatic restacking synthesis procedure has been followed to synthesize a 2D/2D heterostructure (FePS3@BCN) involving FePS3, one of the prominent MPX3 materials, with borocarbonitride (BCN), for hydrogen evolution reaction (HER). The piled up nanosheets of FePS3 and BCN are held together by an electrostatic force, and display extreme robustness under the harsh conditions of HER application. The amalgamated electrocatalyst achieved an overpotential of 187 mV at a current density of 10 mA cm-2 with a shallow Tafel slope of 41 mV dec-1, following the Volmer-Heyrovsky mechanism. The resilience of the electrocatalyst has been examined through chronoamperometric testing for long term stability, and it is stable for more than 14 hours, which shows the excellent electrocatalytic activity for hydrogen evolution reaction owing to the strategic approach to the catalyst design, the use of numerous electrochemically active sites, large surface area and a barrier-free channel for quick ion transfer.

Borocarbonitride-Based Emerging Materials for Supercapacitor Applications: Recent Advances, Challenges, and Future Perspectives.

Supercapacitors have emerged as a promising energy storage technology due to their high-power density, fast charging/discharging capabilities, and long cycle life. Moreover, innovative electrode materials are extensively explored to enhance the performance, mainly the energy density of supercapacitors. Among the two-dimensional (2D) supercapacitor electrodes, borocarbonitride (BCN) has sparked widespread curiosity owing to its exceptional tunable properties concerning the change in concentration of the constituent elements, along with an excellent alternative to graphene-based electrodes. BCN, an advanced nanomaterial, possesses excellent electrical conductivity, chemical stability, and a large specific surface area. These factors contribute to supercapacitors' overall performance and reliability, making them a viable option to address the energy crisis. This review provides a detailed survey of BCN, its structural, electronic, chemical, magnetic, and mechanical properties, advanced synthesis methods, factors affecting the charge storage mechanism, and recent advances in BCN-based supercapacitor electrodes. The review embarks on the scrupulous elaboration of ways to enhance the electrochemical properties of BCN through various innovative strategies followed by critical challenges and future perspectives. BCN, as an eminent electrode material, holds great potential to revolutionize the energy landscape and support the growing energy demands of the future.

Advances in solar energy harvesting integrated by van der Waals graphene heterojunctions.

Graphene has garnered increasing attention for solar energy harvesting owing to its unique features. However, limitations hinder its widespread adoption in solar energy harvesting, comprising the band gapless in the molecular orbital of graphene lattice, its vulnerability to oxidation in oxidative environments, and specific toxic properties that require careful consideration during development. Beyond current challenges, researchers have explored doping graphene with ionic liquids to raise the lifespan of solar cells (SCs). Additionally, they have paid attention to optimizing graphene/Si Schottky junction or Schottky barrier SCs by enhancing the conductivity and work function of graphene, improving silicon's reflectivity, and addressing passivation issues at the surface/interface of graphene/Si, resulting in significant advancements in their power conversion efficiency. Increasing the functional area of graphene-based SCs and designing efficient grid electrodes are also crucial for enhancing carrier collection efficiency. Flaws and contaminants present at the interface between graphene and silicon pose significant challenges. Despite the progress of graphene/Si-based photovoltaic cells still needs to catch up to the efficiency achieved by commercially available Si p-n junction SCs. The low Schottky barrier height, design-related challenges associated with transfer techniques, and high lateral resistivity of graphene contribute to this performance gap. To maximize the effectiveness and robustness of graphene/Si-based photovoltaic cells, appropriate interlayers have been utilized to tune the interface and modulate graphene's functionality. This mini-review will address ongoing research and development endeavors using van der Waals graphene heterojunctions, aiming to overcome the existing limitations and unlock graphene's full potential in solar energy harvesting and smart storage systems.

Recent developments in 2D MXene-based materials for next generation room temperature NO2 gas sensors.

MXenes with distinctive structures, good electrical conductivity and abundant functional groups have shown great potential in the fabrication of high performance gas sensors. Since the sensing mechanism of MXene-based gas sensors often involves a surface-dominant process, they can work at room temperature. In this regard, a significant amount of research has been carried out on MXene-based room temperature gas sensors and they can be viewed as one of the possible materials for NO2 sensing applications in the future. In this review, we focus on the most recent research and improvements in pure MXenes and their nanocomposites for NO2 gas sensing applications. First, we have explored the mechanisms involved in MXenes for NO2 gas sensing. Following that, other ways to tune the MXene sensing performance are investigated, including nanocomposite formation with metal oxides, polymers, and other 2D materials. A comparative analysis of the RT NO2 sensor performance based on MXenes and their hybrids is provided. We also discuss the major challenges of using MXene-related materials and the areas that can further advance in the future for the development of high-performance room temperature NO2 gas sensors.

Room-temperature chemiresistive ammonia sensors based on 2D MXenes and their hybrids: recent developments and future prospects.

Detection of ammonia (NH3) gas at room temperature is essential in a variety of sectors, including pollution monitoring, commercial safety and medical services, etc. Two-dimensional (2D) materials have emerged as fascinating candidates for gas-sensing applications due to their distinct properties. MXenes, a type of 2D transition metal carbides/nitrides/carbonotrides, have drawn the interest of researchers due to their high conductivity, large surface area, and changing surface chemistry. The review begins by describing the NH3 gas-detecting methods of 2D materials and then concentrates on MXene-based sensors, emphasising the benefits that MXenes provide in this context. The study also explains the prime factors involved in evaluating sensor performance, which include sensor response, sensitivity, selectivity, stability, charge transfer values, adsorption energy and response/recovery times. Subsequently, the review covers two main categories: pristine/intercalated MXenes and MXene-based hybrid materials. The review investigates the approaches for improving the sensing characteristics of pristine and intercalated MXenes by introducing MXene hybrids like MXene-metal oxide hybrids, MXene-transition metal dichalcogenides hybrid, MXene-other 2D materials hybrid, MXene-polymers and other hybrids and other MXene-derived materials. In summary, this review offers a thorough overview of current advancements and potential applications for room-temperature ammonia sensors based on 2D MXenes and their hybrids. In order to pave the way for future improvements in MXene-based gas-sensing technology for room temperature ammonia detection, the study concludes by outlining potential future scope and conclusions.

Defect-Engineering of 2D Dichalcogenide VSe2 to Enhance Ammonia Sensing: Acumens from DFT Calculations.

Opportune sensing of ammonia (NH3) gas is industrially important for avoiding hazards. With the advent of nanostructured 2D materials, it is felt vital to miniaturize the detector architecture so as to attain more and more efficacy with simultaneous cost reduction. Adaptation of layered transition metal dichalcogenide as the host may be a potential answer to such challenges. The current study presents a theoretical in-depth analysis regarding improvement in efficient detection of NH3 using layered vanadium di-selenide (VSe2) with the introduction of point defects. The poor affinity between VSe2 and NH3 forbids the use of the former in the nano-sensing device's fabrications. The adsorption and electronic properties of VSe2 nanomaterials can be tuned with defect induction, which would modulate the sensing properties. The introduction of Se vacancy to pristine VSe2 was found to cause about an eight-fold increase (from -012 eV to -0.97 eV) in adsorption energy. A charge transfer from the N 2p orbital of NH3 to the V 3d orbital of VSe2 has been observed to cause appreciable NH3 detection by VSe2. In addition to that, the stability of the best-defected system has been confirmed through molecular dynamics simulation, and the possibility of repeated usability has been analyzed for calculating recovery time. Our theoretical results clearly indicate that Se-vacant layered VSe2 can be an efficient NH3 sensor if practically produced in the future. The presented results will thus potentially be useful for experimentalists in designing and developing VSe2-based NH3 sensors.

Recent Developments and Future Perspective on Electrochemical Glucose Sensors Based on 2D Materials.

Diabetes is a health disorder that necessitates constant blood glucose monitoring. The industry is always interested in creating novel glucose sensor devices because of the great demand for low-cost, quick, and precise means of monitoring blood glucose levels. Electrochemical glucose sensors, among others, have been developed and are now frequently used in clinical research. Nonetheless, despite the substantial obstacles, these electrochemical glucose sensors face numerous challenges. Because of their excellent stability, vast surface area, and low cost, various types of 2D materials have been employed to produce enzymatic and nonenzymatic glucose sensing applications. This review article looks at both enzymatic and nonenzymatic glucose sensors made from 2D materials. On the other hand, we concentrated on discussing the complexities of many significant papers addressing the construction of sensors and the usage of prepared sensors so that readers might grasp the concepts underlying such devices and related detection strategies. We also discuss several tuning approaches for improving electrochemical glucose sensor performance, as well as current breakthroughs and future plans in wearable and flexible electrochemical glucose sensors based on 2D materials as well as photoelectrochemical sensors.

Rational design of selenium inserted 1T/2H mixed-phase molybdenum disulfide for energy storage and pollutant degradation applications.

MoS2based materials are recognized as the promising candidate for multifunctional applications due to its unique physicochemical properties. But presence of lower number of active sites, poor electrical conductivity, and less stability of 2H and 1T MoS2inherits its practical applications. Herein, we synthesized the Se inserted mixed-phase 2H/1T MoS2nanosheets with abundant defects sites to achieve improved overall electrochemical activity. Moreover, the chalcogen insertion induces the recombination of photogenerated excitons and enhances the life of carriers. The bifunctional energy storage and photocatalytic pollutant degradation studies of the prepare materials are carried out. Fabricated symmetric solid-state supercapacitor showed an exceptional capacitance of 178 mF cm-2with an excellent energy density of 8µWh cm-2and power density of 137 mW cm-2, with remarkable capacitance retention of 86.34% after successive 8000 charge-discharge cycles. The photocatalytic dye degradation experiments demonstrate that the prepared Se incorporated 1T/2H MoS2is a promising candidate for dye degradation applications. Further, the DFT studies confirmed that the Se inserted MoS2is a promising electrode material for supercapacitor applications with higherCQdue to a larger density of states near Fermi level as compared to pristine MoS2.

High performance asymmetric supercapacitors based on Ti3C2T x MXene and electrodeposited spinel NiCo2S4 nanostructures.

Spinel metal sulfides have been investigated for a wide range of applications mostly in electrochemical energy storage owing to their better electronic conductivity and high reversible redox activity. Herein, we report a facile fabrication approach for the binder-free supercapacitor electrodes based on spinel NiCo2S4 (NCS) on various substrates such as Cu-foil (CF), Ni-foam (NF), and vertical graphene nanosheets grown on carbon tape (VG) via a single step-controlled electrodeposition technique. The obtained electrodeposited NiCo2S4 grown on Cu-foil (denoted as CF-NCS) in symmetric assembly shows a high specific capacitance of 167.28 F g-1 compared to NCS grown on Ni-foam and VG substrates, whereas, symmetric NiCo2S4 grown on a VG substrate device exhibits better cycling performance (81% for 3000 cycles) compared to CF-NCS and NF-NCS. Furthermore, an asymmetric supercapacitor was assembled in combination with MXene (Ti3C2T x ) as a negative electrode (denoted as TCX). As a result, the CF-NCS//TCX device exhibits a high areal capacitance of 48.6 mF cm-2 at 2 mA cm-2 of current density. We also report good specific capacitance of 54.57 F g-1 at 2 A g-1; in addition, the CF-NCS//TCX assembly delivers maximum areal and gravimetric energy density of 14.86 mWh cm-2 and 14.86 Wh kg-1 respectively. In contrast, the VG-NCS//TCX device showed improved cycling stability with 85% of capacitance retention over 5000 cycles owing to its highly porous structure and multiple conductive networks in the VG substrate and provides structural stability to NCS with fast ion diffusion. This experiment favors 2D MXene as a capacitive electrode that provides a replacement for carbon-based electrodes in asymmetric assembly with superior electrochemical performance. Hence, the hierarchical NCS structure grown on the various substrates in combination with MXene serve as a promising material for energy storage application.

Effect of cobalt doping on the enhanced energy storage performance of 2D vanadium diselenide: experimental and theoretical investigations.

Vanadium Diselenide (VSe2) is a prominent candidate in the 2D transition metal dichalcogenides family for energy storage applications. Herein, we report the experimental and theoretical investigations on the effect of cobalt doping in 1T-VSe2. The energy storage performance in terms of specific capacitance, stability and energy and power density is studied. It is observed that 3% Co doped VSe2exhibits better energy storage performance as compared to other concentrations, with a specific capacitance of âˆ¼193 F g-1in a two-electrode symmetric configuration. First-principles Density Functional Theory based simulations support the experimental findings by suggesting an enhanced quantum capacitance value after the Co doping in the 1T-VSe2. By making use of the advantages of the specific electrode materials, a solid state asymmetric supercapacitor (SASC) is also assembled with MoS2as the negative electrode. The assembled Co-VSe2//MoS2SASC device shows excellent energy storage performance with a maximum energy density of 33.36 Wh kg-1and a maximum power density of 5148 W kg-1with a cyclic stability of 90% after 5000 galvano static charge discharge cycles.

Unveiling and engineering of third-order optical nonlinearities in NiCo2O4 nanoflowers.

In this Letter, we demonstrate for the first time, to the best of our knowledge, NiCo2O4 (NCO) as a novel nonlinear optical material with straightforward potential applications in optical limiting. For the 532 nm nanosecond laser, excited state absorption (ESA) and free-carrier absorption give rise to large ESA coefficient (ßESA) and positive nonlinear n2. On the other hand, when excited with the 800 nm femtosecond laser, two-photon absorption (TPA) takes place, and bound carriers induce strong negative n2. The values of ß and n2 obtained for NCO are found to be higher compared to other conventional transition metal oxides and, therefore, are promising for optics and other photonics applications.

Magnetic gas sensing: working principles and recent developments.

Gas sensors work on the principle of transforming the gas adsorption effects on the surface of the active material into a detectable signal in terms of its changed electrical, optical, thermal, mechanical, magnetic (magnetization and spin), and piezoelectric properties. In magnetic gas sensors, the change in the magnetic properties of the active materials is measured by one of the approaches such as Hall effect, magnetization, spin orientation, ferromagnetic resonance, magneto-optical Kerr effect, and magneto-static wave oscillation effect. The disadvantages of different types of gas sensors include their chemical selectivity and sensitivity to humidity and high-temperature operation. For example, in the case of chemiresistive-type gas sensors, the change in the sensor resistance can drastically vary in the real environment due to the presence of other gas species and the overall electrical effect is quite complex due to simultaneous surface reactions. Further, it is not easy to make stable contacts for powdered samples for the conventional electrical property-based gas sensors. Fire hazard is another issue for the electrical property-based hydrogen gas sensors due to their flammable nature at higher operating temperature. In this regard, to solve these issues, magnetic gas sensor concepts have emerged, in which the magnetic properties of the materials get modified when exposed to gas molecules. In this review article, the working principles, fundamentals, recent developments, and future perspectives in magnetic gas sensors are reviewed. Finally, the prospects and opportunities in these exciting fields are also commented upon based on their current progress.

Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications.

Conducting polymers are extensively studied due to their outstanding properties, including tunable electrical property, optical and high mechanical properties, easy synthesis and effortless fabrication and high environmental stability over conventional inorganic materials. Although conducting polymers have a lot of limitations in their pristine form, hybridization with other materials overcomes these limitations. The synergetic effects of conducting polymer composites give them wide applications in electrical, electronics and optoelectronic fields. An in-depth analysis of composites of conducting polymers with carbonaceous materials, metal oxides, transition metals and transition metal dichalcogenides etc. is used to study them effectively. Here in this review we seek to describe the transport models which help to explain the conduction mechanism, relevant synthesis approaches, and physical properties, including electrical, optical and mechanical properties. Recent developments in their applications in the fields of energy storage, photocatalysis, anti-corrosion coatings, biomedical applications and sensing applications are also explained. Structural properties play an important role in the performance of the composites.