ABSTRACT
Every year, new compounds contained in consumer products, such as detergents, paints, products for personal hygiene, and drugs for human and veterinary use, are identified in wastewater and are added to the list of molecules that need monitoring. These compounds are indicated with the term emerging contaminants (or Contaminants of Emerging Concern, CECs) since they are potentially dangerous for the environment and human health. To date, among the most widely used methodologies for the removal of CECs from the aquatic environment, adsorption processes play a role of primary importance, as they have proven to be characterized by high removal efficiency, low operating and management costs, and an absence of undesirable by-products. In this paper, the adsorption of ibuprofen (IBU), a nonsteroidal anti-inflammatory drug widely used for treating inflammation or pain, was performed for the first time using two different types of geopolymer-based materials, i.e., a metakaolin-based (GMK) and an organic-inorganic hybrid (GMK-S) geopolymer. The proposed adsorbing matrices are characterized by a low environmental footprint and have been easily obtained as powders or as highly porous filters by direct foaming operated directly into the adsorption column. Preliminary results demonstrated that these materials can be effectively used for the removal of ibuprofen from contaminated water (showing a concentration decrease of IBU up to about 29% in batch, while an IBU removal percentage of about 90% has been reached in continuous), thus suggesting their potential practical application.
Subject(s)
Ibuprofen , Water Pollutants, Chemical , Water Purification , Ibuprofen/chemistry , Ibuprofen/isolation & purification , Water Pollutants, Chemical/isolation & purification , Water Pollutants, Chemical/chemistry , Adsorption , Water Purification/methods , Polymers/chemistry , Anti-Inflammatory Agents, Non-Steroidal/chemistry , Anti-Inflammatory Agents, Non-Steroidal/isolation & purification , Wastewater/chemistry , Kaolin/chemistryABSTRACT
This contribution presents the preparation and characterization of new geopolymer-based mortars obtained from recycling waste deriving from the production process and the "end-of-life" of porcelain stoneware products. Structural, morphological, and mechanical studies carried out on different kinds of mortars prepared by using several types of by-products (i.e., pressed burnt and extruded ceramic waste, raw pressed and gypsum resulting from exhausted moulds) point out that these systems can be easily cast, also in complex shapes, and show a more consistent microstructure with respect to the geopolymer paste, with a reduced amount of microcracks. Moreover, the excellent adhesion of these materials to common substrates such as pottery and earthenware, even for an elevated concentration of filler, suggests their use in the field of technical-artistic value-added applications, such as restoration, conservation, and/or rehabilitation of historic monuments, or simply as materials for building revetments. For all these reasons, the proposed materials could represent valuable candidates to try to overcome some problems experienced in the cultural heritage sector concerning the selection of environmentally friendly materials that simultaneously meet art and design technical requirements.
ABSTRACT
The recent introduction of the Next Generation EU packages on the circular economy and the Italian Ecological Transition Plan has further boosted the research of effective routes to design materials with low energy and low environmental impact, in all areas of research, including art and design and cultural heritage. In this work, we describe for the first time the preparation and characterization of a new sustainable adhesive material to be used in the art and design sector, consisting of a geopolymer-based composite with polyvinyl acetate (PVAc), both considered more environmentally acceptable than the analogous inorganic or polymeric materials currently used in this sector. The key idea has been the development of organic-inorganic composites by reacting low molecular weight polymers with the geopolymer precursor to obtain a material with reduced brittleness and enhanced adhesion with common substrates. Structural, morphological, and mechanical studies pointed out the consistent microstructure of the composite materials if compared to the neat geopolymer, showing lower density (up to 15%), improved flexural strength (up to 30%), similar water absorption and a relevant toughening effect (up to 40%). Moreover, the easy pourability in complex shapes and the excellent adhesion of these materials to common substrates suggest their use as materials for restoration, rehabilitation of monuments, and decorative and architectural intervention. The organic-inorganic nature of these new materials also makes them easily recognizable from the support on which they are used, favoring, in line with the dictates of good restoration practices, their possible complete removal. For all these reasons, these new materials could represent promising candidates to overcome the limits related to the creative industry for what concerns the selection of environmentally friendly materials to meet design requirements with low environmental impacts.
ABSTRACT
The topic of sustainability of reinforced concrete structures is strictly related with their durability in aggressive environments. In particular, at equal environmental impact, the higher the durability of construction materials, the higher the sustainability. The present review deals with the possible strategies aimed at producing sustainable and durable reinforced concrete structures in different environments. It focuses on the design methodologies as well as the use of unconventional corrosion-resistant reinforcements, alternative binders to Portland cement, and innovative or traditional solutions for reinforced concrete protection and prevention against rebars corrosion such as corrosion inhibitors, coatings, self-healing techniques, and waterproofing aggregates. Analysis of the scientific literature highlights that there is no preferential way for the production of "green" concrete but that the sustainability of the building materials can only be achieved by implementing simultaneous multiple strategies aimed at reducing environmental impact and improving both durability and performances.
ABSTRACT
A new class of zirconium and hafnium complexes coordinated by linear dianonic tetradentate NSSN ligands is reported. The ligands feature two amide functions coupled with two thioether groups linked by a central flexible ethane bridge and two lateral rigid phenylene bridges and differ for the substituents on the aniline nitrogen atoms, i.e., isopropyl, cyclohexyl, or mesityl substituents: NSSN-iPr, NSSN-Cy, or NSSN-Mes. They were prepared by reacting 2-aminothiophenol with dibromoethane to afford the NSSN ligands without substituents on the aniline nitrogen atoms, which were subsequently alkylated through a reductive amination of acetone or cyclohexanone or palladium-catalyzed cross-coupling reaction with mesityl bromide. The corresponding zirconium and hafnium complexes 1-5 were obtained through a transamination reaction between the neutral ligands and Zr(NMe2)4 or Hf(NMe2)4 [(NSSN-iPr)Zr(NMe2)2 (1), (NSSN-Cy)Zr(NMe2)2 (2), (NSSN-Mes)Zr(NMe2)2 (3), (NSSN-iPr)Hf(NMe2)2 (4), and (NSSN-Cy)Hf(NMe2)2 (5)]. They were characterized in solution by NMR spectroscopy and in solid state by X-ray diffraction analysis (except for 3). All complexes present an octahedral coordination geometry with a fac-fac ligand wrapping and a cis relationship between the other two monodentate ligands. The catalytic performances of 1-5 in the ring-opening polymerization of cyclic esters were investigated. Complex 1 was the most active: its polymerization activity was superior to those generally displayed by zirconium complexes featuring OSSO ligands and compared well with those of the most active group 4 complexes operating in a toluene solution.
ABSTRACT
This research investigates the preparation and characterization of new organic-inorganic geopolymeric foams obtained by simultaneously reacting coal fly ash and an alkali silicate solution with polysiloxane oligomers. Foaming was realized in situ using Si0 as a blowing agent. Samples with density ranging from 0.3 to 0.7 g/cm3 that show good mechanical properties (with compressive strength up to ≈5 MPa for a density of 0.7 g/cm3) along with thermal performances (λ = 0.145 ± 0.001 W/m·K for the foamed sample with density 0.330 g/cm3) comparable to commercial lightweight materials used in the field of thermal insulation were prepared. Since these foams were obtained by valorizing waste byproducts, they could be considered as low environmental impact materials and, hence, with promising perspectives towards the circular economy.
ABSTRACT
For the first time, hybrid organic-inorganic geopolymeric foams were successfully used as monolithic adsorbents for the removal of metallic ions pollutants from wastewaters. The foams were realized by the in situ foaming of a hybrid geopolymer obtained by a reaction of metakaolin and polysiloxane oligomers under strong alkaline conditions and then cured at room temperature. In this way, porous materials with densities ranging from 0.4 to 0.7 g/cm3 and showing good mechanical properties were produced. With the aim of producing self-standing monolithic adsorbents for the removal of metallic ions pollutants from wastewaters, these porous hybrid geopolymers were subjected to a washing pretreatment with ultrapure water, dried, and then used for absorption tests by dipping them into an aqueous solution with an initial concentration of 20 ppm of Pb2+, Cd2+, Cu2+, and Zn2+ ions. Preliminary results indicated that all the tested materials are effective in the adsorption of the tested metal ions and do not release the removed metal ions upon sinking in ultrapure water, even for a very long time. Interestingly, compressive strength tests performed before and after the washing treatments show that the foamed samples remain intact and maintain their physical-mechanical characteristics, suggesting that these kinds of materials are promising candidates for the production of self-standing, monolithic adsorbent substrates that can be easily collected when exhausted, which is a major advantage in comparison with the use of powdered adsorbents. Moreover, since these materials can be obtained by a simple and versatile experimental procedure, they could be easily shaped or directly foamed into precast molds to be used in packed beds as membranes.
ABSTRACT
The preparation and characterization of innovative organic-inorganic hybrid geopolymers, obtained by valorizing coal fly ash generated from thermoelectric power plants, is reported for the first time. These hybrid materials are prepared by simultaneously reacting fly ash and dimethylsiloxane oligomers at 25 °C in a strongly alkaline environment. Despite their lower density, the obtained materials are characterized by highly improved mechanical properties when compared to the unmodified geopolymer obtained without the use of polysiloxanes, hence confirming the effectiveness of the applied synthetic strategy which specifically aims at obtaining hybrid materials with better mechanical properties in respect to conventional ones. This study is an example of the production of new materials by reusing and valorizing waste raw resources and by-products, thus representing a possible contribution towards the circular economy.
Subject(s)
Coal Ash/chemistry , Polymers/chemistry , Siloxanes/chemistry , Mechanical Phenomena , Microscopy, Electron, Scanning , Molecular Structure , Spectrum AnalysisABSTRACT
The preparation and characterization of composite materials based on geopolymers obtained from fly ash and epoxy resins are reported for the first time. These materials have been prepared through a synthetic method based on the concurrent reticulation of the organic and inorganic components that allows the formation of hydrogen bonding between the phases, ensuring a very high compatibility between them. These new composites show significantly improved mechanical properties if compared to neat geopolymers with the same composition and comparable performances in respect to analogous geopolymer-based composites obtained starting from more expensive raw material such as metakaolin. The positive combination of an easy synthetic approach with the use of industrial by-products has allowed producing novel low cost aluminosilicate binders that, thanks to their thixotropicity and good adhesion against materials commonly used in building constructions, could be used within the field of sustainable building.
ABSTRACT
This study presents an experimental overview for the development of photocatalytic materials based on geopolymer binders as catalyst support matrices. Particularly, geopolymer matrices obtained from different solid precursors (fly ash and metakaolin), composite systems (siloxane-hybrid, foamed hybrid), and curing temperatures (room temperature and 60 °C) were investigated for the same photocatalyst content (i.e., 3% TiO2 by weight of paste). The geopolymer matrices were previously designed for different applications, ranging from insulating (foam) to structural materials. The photocatalytic activity was evaluated as NO degradation in air, and the results were compared with an ordinary Portland cement reference. The studied matrices demonstrated highly variable photocatalytic performance depending on both matrix constituents and the curing temperature, with promising activity revealed by the geopolymers based on fly ash and metakaolin. Furthermore, microstructural features and titania dispersion in the matrices were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray (EDS) analyses. Particularly, EDS analyses of sample sections indicated segregation effects of titania in the surface layer, with consequent enhancement or depletion of the catalyst concentration in the active sample region, suggesting non-negligible transport phenomena during the curing process. The described results demonstrated that geopolymer binders can be interesting catalyst support matrices for the development of photocatalytic materials and indicated a large potential for the exploitation of their peculiar features.
ABSTRACT
The title compound,[FeCl2(C18H25N3O2)], has a distorted tetra-hedral Cl2N2 coordination of the Fe(II) atom as a result of the constraints imposed by the 2-[2,2-bis-(4,4-dimethyl-4,5-di-hydro-1,3-oxazol-2-yl)prop-yl]pyridine ligand. The pyridine ring is almost perpendicular to the six-membered chelated ring containing the metal atom [dihedral angle between their mean planes = 88.5â (1)°].
ABSTRACT
The title compound, C22H28N2O6, crystallizes with one half-mol-ecule in the independent unit, the mol-ecule being located on an inversion centre. The penthyl groups are in the all-trans conformation and an almost planar conformation of the whole mol-ecule is observed [maximum deviation from the least-squares plane through all non-H atoms is 0.0229â (17)â Å for an N atom]. The amino groups are involved in intra- and inter-molecular hydrogen bonds. Intra-molecular hydrogen bonding involving the amino group and ester carbonyl helps to lock the syn conformation of the ester with respect to the amino group. In the crystal, N-Hâ¯O hydrogen bonding involving the amino group and the furan and ester carbonyl O atoms self-assembles the mol-ecules into a two-dimensional hydrogen-bonded network parallel to (010) that displays inter-digital packing sustained by alk-yl-alkyl inter-actions.
ABSTRACT
A new, easy and cost-effective synthetic procedure for the preparation of thermosetting melamine-based epoxy resins is reported. By this innovative synthetic method, different kinds of resins can be obtained just by mixing the reagents in the presence of a catalyst without solvent and with mild curing conditions. Two types of resins were synthesized using melamine and a glycidyl derivative (resins I) or by adding a silane derivative (resin II). The resins were characterized by means of chemical-physical and thermal techniques. Experimental results show that all the prepared resins have a good thermal stability, but differ for their mechanical properties: resin I exhibits remarkable stiffness with a storage modulus value up to 830 MPa at room temperature, while lower storage moduli were found for resin II, indicating that the presence of silane groups could enhance the flexibility of these materials. The resins show a pot life higher than 30 min, which makes these resins good candidates for practical applications. The functionalization with silane terminations can be exploited in the formulation of hybrid organic-inorganic composite materials.
Subject(s)
Epoxy Resins/chemical synthesis , Triazines/chemistry , Epoxy Resins/chemistryABSTRACT
The preparation and the characterization of novel geopolymer-based hybrid composites are reported. These materials have been prepared through an innovative synthetic approach, based on a co-reticulation in mild conditions of commercial epoxy based organic resins and a metakaolin-based geopolymer inorganic matrix. This synthetic strategy allows the obtainment of a homogeneous dispersion of the organic particles in the inorganic matrix, up to 25% in weight of the resin. The materials obtained present significantly enhanced compressive strengths and toughness with respect to the neat geopolymer, suggesting their wide utilization for structural applications. A preliminary characterization of the porous materials obtained by removing the organic phase from the hybrid composites by means of heat treatments is also reported. Possible applications of these materials in the field of water purification, filtration, or as lightweight insulating materials are envisaged.
ABSTRACT
In this study the development of a metakaolin based geopolymeric mortar to be used as bonding matrix for external strengthening of reinforced concrete beams is reported. Four geopolymer formulations have been obtained by varying the composition of the activating solution in terms of SiO2/Na2O ratio. The obtained samples have been characterized from a structural, microstructural and mechanical point of view. The differences in structure and microstructure have been correlated to the mechanical properties. A major issue of drying shrinkage has been encountered in the high Si/Al ratio samples. In the light of the characterization results, the optimal geopolymer composition was then applied to fasten steel fibers to reinforced concrete beams. The mechanical behavior of the strengthened reinforced beams was evaluated by four-points bending tests, which were performed also on reinforced concrete beams as they are for comparison. The preliminary results of the bending tests point out an excellent behavior of the geopolymeric mixture tested, with the failure load of the reinforced beams roughly twice that of the control beam.
ABSTRACT
The preparation and characterization of metakaolin-based geopolymer mortars containing an organic epoxy resin are presented here for the first time. The specimens have been prepared by means of an innovative in situ co-reticulation process, in mild conditions, of commercial epoxy based organic resins and geopolymeric slurry. In this way, geopolymer based hybrid mortars characterized by a different content of normalized sand (up to 66% in weight) and by a homogeneous dispersion of the organic resin have been obtained. Once hardened, these new materials show improved compressive strength and toughness in respect to both the neat geopolymer and the hybrid pastes since the organic polymer provides a more cohesive microstructure, with a reduced amount of microcracks. The microstructural characterization allows to point out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars and concretes. A correlation between microstructural features and mechanical properties has been studied too.
ABSTRACT
This work deals with the Dakin-West synthesis, starting from the nucleoamino acid 1-thyminyl acetic acid, as well the NMR, ESI MS, and X-ray characterization of a heteroaromatic compound denominated by us T(2)CO, comprising two thymine moieties anchored to a 2-propanonic unit, the spectroscopic properties of which were studied by UV as a function of temperature and ionic strength. Preliminary binding-studies with molecules of biomedical interest such as nucleic acids and proteins, performed on samples containing T(2)CO, suggested that this molecule is able to interact very weakly with double-stranded RNA, whereas it does not seem to bind other nucleic acids or proteins. Moreover, by studies with fresh human serum we found that T(2)CO is resistant to enzymatic degradation till 24 h, whereas UV metal binding-studies, performed using solutions of copper (II) chloride dihydrate and nickel (II) chloride hexahydrate, revealed a certain ability of T(2)CO to bind copper (II) cation. Finally, by CD spectroscopy we investigated the influence of T(2)CO on the already described supramolecular networks based on L-serine-containing nucleopeptides. More particularly, we found that T(2)CO is able to increase the level of structuration of the non-covalent supramolecular assembly of the chiral nucleopeptides, which is a feature of remarkable interest for the development of innovative drug delivery tools.
Subject(s)
Acetic Acid/chemistry , Drug Carriers/chemical synthesis , Ketones/chemical synthesis , Peptide Nucleic Acids/chemistry , RNA, Double-Stranded/chemistry , Thymine/analogs & derivatives , Cations, Divalent , Circular Dichroism , Copper/chemistry , Crystallography, X-Ray , Humans , Magnetic Resonance Spectroscopy , Molecular Structure , Nickel/chemistry , Osmolar Concentration , Serine/chemistry , Spectrometry, Mass, Electrospray Ionization , Temperature , Thymine/chemical synthesisABSTRACT
The preparation and characterization of new Zn(II) complexes of the type [(PPP)ZnR] in which R = Et (1) or N(SiMe(3))(2) (2) and PPP is a tridentate monoanionic phosphido ligand (PPP-H = bis(2-diphenylphosphinophenyl)phosphine) are reported. Reaction of ZnEt(2) and Zn[N(SiMe(3))(2)](2) with one equivalent of proligand PPP-H produced the corresponding tetrahedral zinc ethyl (1) and zinc amido (2) complexes in high yield. Homoleptic (PPP)(2) Zn complex 3 was obtained by reaction of the precursors with two equivalents of the proligand. Structural characterization of 1-3 was achieved by multinuclear NMR spectroscopy ((1)H, (13)C, and (31)P) and X-ray crystallography (3). Variable-temperature (1)H and (31)Pâ NMR studies highlighted marked flexibility of the phosphido pincer ligand in coordination at the metal center. A DFT calculation on the compounds provided theoretical support for this behavior. The activities of 1 and 2 toward the ring-opening polymerization of ε-caprolactone and of L- and rac-lactide were investigated, also in combination with an alcohol as external chain-transfer agent. Polyesters with controlled molecular parameters (M(n), end groups) and low polydispersities were obtained. A DFT study on ring-opening polymerization promoted by these complexes highlighted the importance of the coordinative flexibility of the ancillary ligand to promote monomer coordination at the reactive zinc center. Preliminary investigations showed the ability of these complexes to promote copolymerization of L-lactide and ε-caprolactone to achieve random copolymers whose microstructure reproduces the composition of the monomer feed.
Subject(s)
Caproates/chemistry , Coordination Complexes/chemistry , Dioxanes/chemistry , Lactones/chemistry , Phosphines/chemistry , Crystallography, X-Ray , Ligands , Magnetic Resonance Spectroscopy , Molecular Structure , Polymerization , Zinc/chemistryABSTRACT
Multilayers and self-assembled monolayers of on-purpose-prepared organometallic thiolates, trans-[Pd(PBu(3))(2)(SCOCH(3))(2)], trans-[(C(6)H(5)C[triple bond]C)Pd(PBu(3))(2)(SCOCH(3))], and trans,trans-[(CH(3)COS)Pd(PBu(3))(2)(C[triple bond]C-C(6)H(4)-C(6)H(4)-C[triple bond]C)(PBu(3))(2)Pd(SCOCH(3))] were deposited onto gold surfaces. High-resolution X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure measurements allowed us to assess the anchoring of the organometallic thiols onto gold substrates; the interaction occurring at the interface; and their molecular orientation on the surface with tilt angles of about 30 degrees-40 degrees, depending on the investigated molecule. The molecule packing density/coverage was also assessed.
Subject(s)
Organometallic Compounds/chemistry , Palladium/chemistry , Sulfhydryl Compounds/chemistry , Absorption , Gold/chemistry , Photoelectron Spectroscopy , Silicon/chemistryABSTRACT
After five decades of largely serendipitous (albeit formidable) progress, catalyst design in Ziegler-Natta olefin polymerization, i.e., the rational implementation of new active species to target predetermined polyolefin architectures, has ultimately become a realistic ambition, thanks to a much deeper fundamental understanding and major advances in the tools of computational chemistry. In this article, we discuss, as a case history, a unique class of stereorigid C2-symmetric bis(phenoxy-amine)Zr(IV) catalysts with controlled kinetic behavior. A large variety of polypropylene microstructures have been obtained with these catalysts by modulating the steric demand of one key substituent, without altering the nature and symmetry of the ancillary ligand framework, under the guidance of computer modeling. This unusual achievement is relevant per se and for the perspective implications in catalyst discovery.