ABSTRACT
The monitoring of benzene and other carcinogenic aromatic volatile compounds at the ppb level requires boosting both the selectivity and sensitivity of the corresponding sensors. A workable solution is the introduction in the devices of preconcentrator units containing molecular receptors. In particular, quinoxaline cavitands (QxCav) resulted in very efficient preconcentrator materials for the BTEX in air to the point that they have been successfully implemented in a commercial sensor. In this work, we report a highly efficient quinoxaline-based preconcentrator material, in which the intrinsic adsorption capacity of the QxCav has been maximized. The new material consists of silica particles covalently coated with a suitable functionalized QxCav derivative (QxCav@SiO2). In this way, all the cavities are exposed to the analyte flux, boosting the performance of the resulting preconcentration cartridge well above that of the pure QxCav. It is noteworthy that the preconcentrator adsorption capacity is independent of the relative humidity of the incoming air.
ABSTRACT
The selectivity and efficiency of benzene and toluene uptake at the gas-solid interface by quinoxaline cavitands is strongly enhanced by partial rigidification of the receptor cavity and immobilization of the cavitand onto silica gel particles.
Subject(s)
Ethers, Cyclic , Quinoxalines , Molecular Conformation , ResorcinolsABSTRACT
Glioblastoma multiforme (GBM) is a lethal malignant tumor accounting for 42% of the tumors of the central nervous system, the median survival being 15 months. At present, no curative treatment is available for GBM and new drugs and therapeutic protocols are urgently needed. In this context, combined therapy appears to be a very interesting approach. The isothiocyanate sulforaphane (SFN) has been previously shown to induce apoptosis and inhibit the growth and invasion of GBM cells. On the other hand, the microRNA miR-15b is involved in invasiveness and proliferation in GBM and its inhibition is associated with the induction of apoptosis. On the basis of these observations, the objective of the present study was to determine whether a combined treatment using SFN and a peptide nucleic acid interfering with miR-15b-5p (PNA-a15b) might be proposed for increasing the pro-apoptotic effects of the single agents. To verify this hypothesis, we have treated GMB U251 cells with SFN alone, PNA-a15b alone or their combination. The cell viability, apoptosis and combination index were, respectively, analyzed by calcein staining, annexin-V and caspase-3/7 assays, and RT-qPCR for genes involved in apoptosis. The efficacy of the PNA-a15b determined the miR-15b-5p content analyzed by RT-qPCR. The results obtained indicate that SFN and PNA-a15b synergistically act in inducing the apoptosis of U251 cells. Therefore, the PNA-a15b might be proposed in a "combo-therapy" associated with SFN. Overall, this study suggests the feasibility of using combined treatments based on PNAs targeting miRNA involved in GBM and nutraceuticals able to stimulate apoptosis.
Subject(s)
Apoptosis/drug effects , Apoptosis/genetics , Gene Expression Regulation, Neoplastic/drug effects , Isothiocyanates/pharmacology , MicroRNAs/genetics , Peptide Nucleic Acids/pharmacology , Sulfoxides/pharmacology , Cell Line, Tumor , Cell Survival/drug effects , Drug Synergism , Glioblastoma , HumansABSTRACT
Liquid biopsy has dramatically changed cancer management in the last decade; however, despite the huge number of miRNA signatures available for diagnostic or prognostic purposes, it is still unclear if dysregulated miRNAs in the bloodstream could be used to develop miRNA-based therapeutic approaches. In one author's previous work, nine miRNAs were found to be dysregulated in early-stage colon cancer (CRC) patients by NGS analysis followed by RT-dd-PCR validation. In the present study, the biological effects of the targeting of the most relevant dysregulated miRNAs with anti-miRNA peptide nucleic acids (PNAs) were verified, and their anticancer activity in terms of apoptosis induction was evaluated. Our data demonstrate that targeting bloodstream up-regulated miRNAs using anti-miRNA PNAs leads to the down-regulation of target miRNAs associated with inhibition of the activation of the pro-apoptotic pathway in CRC cellular models. Moreover, very high percentages of apoptotic cells were found when the anti-miRNA PNAs were associated with other pro-apoptotic agents, such as sulforaphane (SFN). The presented data sustain the idea that the targeting of miRNAs up-regulated in the bloodstream with a known role in tumor pathology might be a tool for the design of protocols for anti-tumor therapy based on miRNA-targeting molecules.
ABSTRACT
Standard protocols for the analysis of circulating tumor DNA (ctDNA) include the isolation of DNA from the patient's plasma and its amplification and analysis in buffered solutions. The application of such protocols is hampered by several factors, including the complexity and time-constrained preanalytical procedures, risks for sample contamination, extended analysis time, and assay costs. A recently introduced nanoparticle-enhanced surface plasmon resonance imaging-based assay has been shown to simplify procedures for the direct detection of tumor DNA in the patient's plasma, greatly simplifying the cumbersome preanalytical phase. To further simplify the protocol, a new dual-functional low-fouling poly-l-lysine (PLL)-based surface layer has been introduced that is described herein. The new PLL-based layer includes a densely immobilized CEEEEE oligopeptide to create a charge-balanced system preventing the nonspecific adsorption of plasma components on the sensor surface. The layer also comprises sparsely attached peptide nucleic acid probes complementary to the sequence of circulating DNA, e.g., the analyte that has to be captured in the plasma from cancer patients. We thoroughly investigated the contribution of each component of the dual-functional polymer to the antifouling properties of the surface layer. The low-fouling property of the new surface layer allowed us to detect wild-type and KRAS p.G12D-mutated DNA in human plasma at the attomolar level (â¼2.5 aM) and KRAS p.G13D-mutated tumor DNA in liquid biopsy from a cancer patient with almost no preanalytical treatment of the patient's plasma, no need to isolate DNA from plasma, and without PCR amplification of the target sequence.
Subject(s)
Neoplasms , Peptide Nucleic Acids , DNA/genetics , Humans , Lysine , Neoplasms/genetics , Surface Plasmon ResonanceABSTRACT
A novel enzyme-labelled voltammetric magnetogenoassay for DNA sensing based on the use of carboxyl-surface coated magnetic microbeads functionalized with PNA probes and subsequent read-out on screen-printed electrode (SPE) substrates was developed. The assay was validated for determination of non-amplified genomic DNA from genetically modified Roundup Ready soy. Outstanding performance with respect to other genoassays requiring preliminary amplification of target DNA via PCR was demonstrated. The analytical performance was also improved compared to previous methods based on the immobilization of the same PNA probes on SPE substrates, since the method was found capable of achieving LOD and LOQ of 415 fM and 995 fM, respectively. The ability of the magnetogenoassay to detect the presence of Roundup Ready soy DNA sequence was tested on genomic DNA extract from European Reference Material soy flours, demonstrating the capability of the method to match the European Union regulation for labelling of food containing a percentage of GM products greater than 0,9%.
Subject(s)
Glycine max , Magnetic Phenomena , DNA, Plant , Microspheres , Plants, Genetically Modified/genetics , Glycine max/geneticsABSTRACT
A novel synthesis of C(2)-modified peptide nucleic acids (PNAs) is proposed, using a submonomeric strategy with minimally protected building blocks, which allowed a reduction in the required synthetic steps. N(3)-unprotected, d-Lys- and d-Arg-based backbones were used to obtain positively charged PNAs with high optical purity, as inferred from chiral GC measurements. "Chiral-box" PNAs targeting the G12D point mutation of the KRAS gene were produced using this method, showing improved sequence selectivity for the mutated- vs wild-type DNA strand with respect to unmodified PNAs.
Subject(s)
Arginine/chemistry , DNA/chemistry , Lysine/chemistry , Peptide Nucleic Acids/chemical synthesis , Molecular Structure , StereoisomerismABSTRACT
RAS mutations in the blood of colorectal cancer (CRC) patients are emerging as biomarkers of acquired resistance to Epidermal Growth Factor Receptor therapy. Unfortunately, reliable assays granting fast, real-time monitoring of treatment response, capable of refining retrospective, tissue-based analysis, are still needed. Recently, several methods for detecting blood RAS mutations have been proposed, generally relying on multi-step and PCR-based, time-consuming and cost-ineffective procedures. By exploiting a liquid biopsy approach, we developed an ultrasensitive nanoparticle-enhanced plasmonic method for detecting ~1 aM RAS single nucleotide variants (SNVs) in the plasma of CRC patients. The assay does not require the extraction of tumor DNA from plasma and detects it in volumes as low as 40 µL of plasma, which is at least an order of magnitude smaller than that required by state of the art liquid biopsy technologies. The most prevalent RAS mutations are detected in DNA from tumor tissue with 100% sensitivity and 83.33% specificity. Spike-in experiments in human plasma further encouraged assay application on clinical specimens. The assay was proven in plasma from CRC patients and healthy donors, and full discrimination between mutated DNA from patients over wild-type DNA from healthy volunteers was obtained thus demonstrating its promising avenue for cancer monitoring based on liquid biopsy.
Subject(s)
Biosensing Techniques , Cell-Free Nucleic Acids/isolation & purification , Colorectal Neoplasms , ras Proteins/genetics , Colorectal Neoplasms/diagnosis , Colorectal Neoplasms/genetics , DNA, Neoplasm/genetics , Humans , Mutation , Polymerase Chain Reaction , Retrospective StudiesABSTRACT
Peptide nucleic acids (PNAs) have been demonstrated to be very useful tools for gene regulation at different levels and with different mechanisms of action. In the last few years the use of PNAs for targeting microRNAs (anti-miRNA PNAs) has provided impressive advancements. In particular, targeting of microRNAs involved in the repression of the expression of the cystic fibrosis transmembrane conductance regulator (CFTR) gene, which is defective in cystic fibrosis (CF), is a key step in the development of new types of treatment protocols. In addition to the anti-miRNA therapeutic strategy, inhibition of miRNA functions can be reached by masking the miRNA binding sites present within the 3'UTR region of the target mRNAs. The objective of this study was to design a PNA masking the binding site of the microRNA miR-145-5p present within the 3'UTR of the CFTR mRNA and to determine its activity in inhibiting miR-145-5p function, with particular focus on the expression of both CFTR mRNA and CFTR protein in Calu-3 cells. The results obtained support the concept that the PNA masking the miR-145-5p binding site of the CFTR mRNA is able to interfere with miR-145-5p biological functions, leading to both an increase of CFTR mRNA and CFTR protein content.
Subject(s)
Cystic Fibrosis Transmembrane Conductance Regulator/metabolism , MicroRNAs/metabolism , Peptide Nucleic Acids/metabolism , 3' Untranslated Regions/genetics , Binding Sites/genetics , Cell Line , Cystic Fibrosis Transmembrane Conductance Regulator/genetics , Humans , MicroRNAs/geneticsABSTRACT
The available active surface area and the density of probes immobilized on this surface are responsible for achieving high specificity and sensitivity in electrochemical biosensors that detect biologically relevant molecules, including DNA. Here, we report the design of gold-coated, silicon micropillar-structured electrodes functionalized with modified poly-l-lysine (PLL) as an adhesion layer to concomitantly assess the increase in sensitivity with the increase of the electrochemical area and control over the probe density. By systematically reducing the center-to-center distance between the pillars (pitch), denser micropillar arrays were formed at the electrode, resulting in a larger sensing area. Azido-modified peptide nucleic acid (PNA) probes were click-reacted onto the electrode interface, exploiting PLL with appended oligo(ethylene glycol) (OEG) and dibenzocyclooctyne (DBCO) moieties (PLL-OEG-DBCO) for antifouling and probe binding properties, respectively. The selective electrochemical sandwich assay formation, composed of consecutive hybridization steps of the target complementary DNA (cDNA) and reporter DNA modified with the electroactive ferrocene functionality (rDNA-Fc), was monitored by quartz crystal microbalance. The DNA detection performance of micropillared electrodes with different pitches was evaluated by quantifying the cyclic voltammetric response of the surface-confined rDNA-Fc. By decrease of the pitch of the pillar array, the area of the electrode was enhanced by up to a factor 10.6. A comparison of the electrochemical data with the geometrical area of the pillared electrodes confirmed the validity of the increased sensitivity of the DNA detection by the design of the micropillar array.
Subject(s)
DNA/analysis , Immobilized Nucleic Acids/chemistry , Peptide Nucleic Acids/chemistry , Biosensing Techniques/instrumentation , Biosensing Techniques/methods , DNA/genetics , Electrochemical Techniques/instrumentation , Electrochemical Techniques/methods , Electrodes , Gold/chemistry , Immobilized Nucleic Acids/genetics , Nucleic Acid Hybridization , Peptide Nucleic Acids/genetics , Polylysine/chemistry , Silicon/chemistryABSTRACT
Sulforaphane (SFN) is one of most important dietary constituents of broccoli (Brassica oleracea) and other cruciferous vegetables, which have been reported to exhibit health benefits, including prevention and therapy of cancer, such as colorectal carcinoma (CRC). The objective of this study was to determine whether the anticancer effect of SFN on colon cancer HT-29 cell line could be improved by the combined treatment with molecules inhibiting microRNAs (miRNAs) involved in CRC. As miRNA inhibiting molecules we focused on peptide-nucleic acids (PNAs). As miRNA to be targeted, miR-15b-5p was selected on the basis of several information present in the literature and confirming that miR-15b-5p is overexpressed in colon cancer patients, and that its targeting decreases cell migration and metastasis in colorectal cancer. In this article, we described for the first time the efficacy of targeting miR-15b-5p by using a PNA against miR-15b-5p (R8-PNA-a15b), functionalized with an octoarginine peptide (R8) for maximizing cellular uptake. The miR-15b-5p downregulation in the colon cancer HT-29 cell line was associated with inhibition of in vitro cell growth and activation of the proapoptotic pathway, demonstrated by a sharp increase of late apoptotic cells in HT-29-treated cell populations. A second conclusion of this study is that the R8-PNA-a15b might be proposed in "combo-therapy" associated with SFN. To our knowledge, no report is available in the literature on a combination between SFN and miRNA-targeting molecules. Our data demonstrate that this combined treatment leads to a very high proportion of apoptotic HT-29 cells (over 85%), a value higher than the sum of the values of apoptotic cells obtained after singularly administered regents (either SFN or R8-PNA-a15b).
Subject(s)
Antineoplastic Combined Chemotherapy Protocols/pharmacology , Apoptosis/drug effects , Isothiocyanates/pharmacology , MicroRNAs/genetics , Peptide Nucleic Acids/pharmacology , Sulfoxides/pharmacology , Apoptosis/genetics , Arginine/chemistry , Cell Proliferation/drug effects , Dose-Response Relationship, Drug , Drug Synergism , Gene Expression Regulation, Neoplastic , HT29 Cells , Humans , MicroRNAs/antagonists & inhibitors , MicroRNAs/metabolism , Oligopeptides/chemistry , Peptide Nucleic Acids/chemistry , Peptide Nucleic Acids/genetics , Peptide Nucleic Acids/metabolismABSTRACT
A new amperometric sandwich-format genosensor has been implemented on single-walled carbon nanotubes screen printed electrodes (SWCNT-SPEs) and compared in terms of performance with analogous genoassays developed using the same methodology on non-nanostructured glassy carbon platforms (GC-SPE). The working principle of the genosensors is based on the covalent immobilization of Peptide Nucleic Acid (PNA) capture probes (CP) on the electrode surface, carried out through the carboxylic functions present on SWCNT-SPEs (carboxylated SWCNT) or electrochemically induced on GC-SPEs. The sequence of the CP was complementary to a 20-mer portion of the target DNA; a second biotin-tagged PNA signalling probe (SP), with sequence complementary to a different contiguous portion of the target DNA, was used to obtain a sandwich hybrid with an Alkaline Phosphatase-streptavidin conjugate (ALP-Strp). Comparison of the responses obtained from the SWCNT-SPEs with those produced from the non-nanostructured substrates evidenced the remarkable enhancement effect given by the nanostructured electrode platforms, achieved both in terms of loading capability of PNA probes and amplification of the electron transfer phenomena exploited for the signal transduction, giving rise to more than four-fold higher sensitivity when using SWCNT-SPEs. The nanostructured substrate allowed to reach limit of detection (LOD) of 71 pM and limit of quantitation (LOQ) of 256 pM, while the corresponding values obtained with GC-SPEs were 430 pM and 1.43 nM, respectively.
ABSTRACT
A novel amperometric genosensor based on PNA probes covalently bound on the surface of Single Walled Carbon Nanotubes - Screen Printed Electrodes (SWCNT-SPEs) was developed and validated in samples of non-amplified genomic DNA extracted from genetically modified (GM)-Soy. The sandwich assay is based on a first recognition of a 20-mer portion of the target DNA by a complementary PNA Capture Probe (CP) and a second hybridization with a PNA Signalling Probe (SP), with a complementary sequence to a different portion of the target DNA. The SP was labelled with biotin to measure current signal by means of a final incubation of an Alkaline Phosphatase-streptavidin conjugate (ALP-Strp). The electrochemical detection was carried out using hydroquinone diphosphate (HQDP) as enzymatic substrate. The genoassay provided a linear range from 250â¯pM to 2.5â¯nM, LOD of 64â¯pM and LOQ of 215â¯pM Excellent selectivity towards one base mismatch (1-MM) or scrambled (SCR) sequences was obtained. A simple protocol for extraction and analysis of non-amplified soybean genomic DNA without sample treatment was developed and validated. Our study provides insight into how the outstanding recognition efficiency of PNAs can be combined with the unique properties of CNTs in terms of signal response enhancement for direct detection of genomic DNA samples at the level of interest without previous amplification.
Subject(s)
Biosensing Techniques/methods , DNA, Plant/analysis , Glycine max/genetics , Nanotubes, Carbon/chemistry , Nucleic Acid Probes/chemistry , Peptide Nucleic Acids/chemistry , Plants, Genetically Modified/genetics , DNA, Plant/genetics , Electrochemical Techniques/methods , Electrodes , Limit of Detection , Nucleic Acid Hybridization , Nucleic Acid Probes/genetics , Peptide Nucleic Acids/genetics , Plants, Genetically Modified/chemistry , Glycine max/chemistryABSTRACT
The immobilization of biomolecules onto polymeric surfaces employed in the fabrication of biomedical and biosensing devices is generally a challenging issue, as the absence of functional groups in such materials does not allow the use of common surface chemistries. Here we report the use of modified poly-l-lysine (PLL) as an effective method for the selective modification of polymeric materials with biomolecules. Cyclic olefin polymer (COP), Ormostamp, and polydimethylsiloxane (PDMS) surfaces were patterned with modified PLLs displaying either biotin or maleimide functional groups. Different patterning techniques were found to provide faithful microscale pattern formation, including micromolding in capillaries (MIMIC) and a hydrogel-based stamping device with micropores. The surface modification and pattern stability were tested with fluorescence microscopy, contact angle and X-ray photoelectron spectroscopy (XPS), showing an effective functionalization of substrates stable for over 20 days. By exploiting the strong biotin-streptavidin interaction or the thiol-maleimide coupling, DNA and PNA probes were displayed successfully on the surface of the materials, and these probes maintained the capability to specifically recognize complementary DNA sequences from solution. The printing of three different PNA-thiol probe molecules in a microarray fashion allowed selective DNA detection from a mixture of DNA analytes, demonstrating that the modified PLL methodology can potentially be used for multiplexed detection of DNA sequences.
ABSTRACT
Biosensors and materials for biomedical applications generally require chemical functionalization to bestow their surfaces with desired properties, such as specific molecular recognition and antifouling properties. The use of modified poly(l-lysine) (PLL) polymers with appended oligo(ethylene glycol) (OEG) and thiol-reactive maleimide (Mal) moieties (PLL-OEG-Mal) offers control over the presentation of functional groups. These reactive groups can readily be conjugated to, for example, probes for DNA detection. Here we demonstrate the reliable conjugation of thiol-functionalized peptide nucleic acid (PNA) probes onto predeposited layers of PLL-OEG-Mal and the control over their surface density in the preceding synthetic step of the PLL modification with Mal groups. By monitoring the quartz crystal microbalance (QCM) frequency shifts of the binding of complementary DNA versus the density of Mal moieties grafted to the PLL, a linear relationship between probe density and PLL grafting density was found. Cyclic voltammetry experiments using Methylene Blue-functionalized DNA were performed to establish the absolute probe density values at the biosensor surfaces. These data provided a density of 1.2 × 1012 probes per cm2 per % of grafted Mal, thus confirming the validity of the density control in the synthetic PLL modification step without the need of further surface characterization.
Subject(s)
Biosensing Techniques , DNA/chemistry , Molecular Probes , Polylysine/chemistry , Peptide Nucleic Acids/chemistry , Quartz Crystal Microbalance Techniques , Surface PropertiesABSTRACT
Silicon nanowire chips can function as sensors for cancer DNA detection, whereby selective functionalization of the Si sensing areas over the surrounding silicon oxide would prevent loss of analyte and thus increase the sensitivity. The thermal hydrosilylation of unsaturated carbon-carbon bonds onto H-terminated Si has been studied here to selectively functionalize the Si nanowires with a monolayer of 1,8-nonadiyne. The silicon oxide areas, however, appeared to be functionalized as well. The selectivity toward the Si-H regions was increased by introducing an extra HF treatment after the 1,8-nonadiyne monolayer formation. This step (partly) removed the monolayer from the silicon oxide regions, whereas the Si-C bonds at the Si areas remained intact. The alkyne headgroups of immobilized 1,8-nonadiyne were functionalized with PNA probes by coupling azido-PNA and thiol-PNA by click chemistry and thiol-yne chemistry, respectively. Although both functionalization routes were successful, hybridization could only be detected on the samples with thiol-PNA. No fluorescence was observed when introducing dye-labeled noncomplementary DNA, which indicates specific DNA hybridization. These results open up the possibilities for creating Si nanowire-based DNA sensors with improved selectivity and sensitivity.
Subject(s)
Nanowires/chemistry , Oxides/chemistry , Peptide Nucleic Acids/chemistry , Silicon Compounds/chemistry , Silicon/chemistry , Alkynes/chemistry , Click Chemistry , DNA/chemistry , Nucleic Acid HybridizationABSTRACT
A synthetic strategy for the production of polyfunctional PNAs bearing substituent groups both on the nucleobase and on the backbone C5 carbon of the same monomer is described; this is based on the use of a tris-orthogonally protected monomer and subsequent solid-phase selective functionalization. This strategy can be used for synthesizing PNAs that are not readily accessible by use of preformed modified monomers. As an example, a PNA-based probe that undergoes a switch in its fluorescence emission upon hybridization with a target oligonucleotide, induced by tailor-made movement of two pyrene substituent groups, was synthesized.