Are Microplastics a Macro Issue? A Review on the Sources of Contamination, Analytical Challenges and Impact on Human Health of Microplastics in Food.

In recent years, human populations' exposure to microplastics via foods is becoming a topic of concern. Although microplastics have been defined as "emerging contaminants", their occurrence in the environment and food is quite dated. This systematic review aims to investigate the discrepancies which are characterizing the research in the microplastics field in foods, with particular regard to sample preparations, microplastics' concentrations and their effect on humans. For the selection of papers, the PRISMA methodology was followed. Discrepancies in the methodological approaches emerged and in the expression of the results as well, underlying the urgency in the harmonization of the methodological approaches. Uncertainties are still present regarding the adverse effects of microplastics on the human body. The scientific evidence obtained thus far is, in fact, not sufficient to demonstrate a concrete negative effect. This review has clearly underlined the need to standardise laboratory approaches to obtain useful results for better food safety management.

Dataset of PAHs determined in home-made honey samples collected in Central Italy by means of DLLME-GC-MS and cluster analysis for studying the source apportionment.

This paper would like to show all the data related to an intensive field campaign focused on the characterization of the Polyaromatic Hydrocarbons (PAHs) composition profile in almost 60 honey samples collected in Central Italy. The analytical data here reported are the base for a study aimed to identify the pollution sources in a region. 22 PAHs were analyzed by means of ultrasound-vortex-assisted dispersive liquid-liquid micro-extraction (DLLME) procedure followed by a triple quadrupole gas chromatograph/mass spectrometer (GC-MS). A chemometrics approach has been carried out for evaluating all the data: in particular, principal component analysis and cluster analysis has been used both for the identification of the main natural/anthropogenic pollutants affecting a site and for evaluating the air quality.

PAHs presence and source apportionment in honey samples: Fingerprint identification of rural and urban contamination by means of chemometric approach.

The quality of honey is assessed through the determination of some commodity parameters: a certain importance is to be attributed to the absence of contaminating residues, in particular of Polycyclic Aromatic Hydrocarbons (PAHs). This paper deeply investigates the presence of 22 PAHs in 57 honey samples collected in Central Italy and identifies the possible source apportionment and fingerprint identification by DLLME-GC-MS analysis and a chemometric approach. Cluster Analysis and Principal Component Analysis have allowed to identify the main PAHs responsible of the contamination, benzo[a]anthracene and phenanthrene, characteristics pollutants of areas constantly exposed. The entire database has been compared to similar ones present in literature, particularly data from Serbia and Belgrado samples. The PCA applied to overall the data confirms the combustion to be the main contamination source in Italian samples whereas highlights the importance of the role of naphthalene, added during beekeeping practices in the other data-set.

Fast and Reliable Determination of Phthalic Acid Esters in the Blood of Marine Turtles by Means of Solid Phase Extraction Coupled with Gas Chromatography-Ion Trap/Mass Spectrometry.

The presence of phthalic acid esters (PAEs) in marine environments is an important issue. These chemicals are able to affect marine organisms, particularly marine turtles, and to act as endocrine disrupters. In this paper, for the first time, a simple and reproducible analytical method based on solid-phase extraction (SPE) coupled with gas chromatography-ion trap/mass spectrometry (GC-IT/MS) was developed for the extraction of phthalates from the blood of marine turtles. The extraction was obtained by using C18 phthalates-free as the stationary phase. In order to individuate the best working conditions for the extraction, the adsorption isotherms and breakthrough curves were studied. The overall analytical methodology was validated in terms of limit of detection (LOD, 0.08-0.6 ng mL-1), limit of quantification (LOQ, 0.4-0.8 ng mL-1), and correlation coefficients (>0.9933). By using this procedure, percentage recoveries ranging from 89 to 103% were achieved. The precision parameters (intra-day and inter-day) were studied, and the obtained values were smaller than 12.5%. These data confirm the goodness of the proposed analytical methodology, which is applied to real samples.

Halogenated Volatile Organic Compounds in Water Samples and Inorganic Elements Levels in Ores for Characterizing a High Anthropogenic Polluted Area in the Northern Latium Region (Italy).

This paper shows a characterization of the organic and inorganic fraction of river waters (Tiber and Marta) and ores/soil samples collected in the Northern Latium region of Italy for evaluating the anthropogenic/natural source contribution to the environmental pollution of this area. For organic compounds, organochloride volatile compounds in Tiber and Marta rivers were analyzed by two different clean-up methods (i.e., liquid-liquid extraction and static headspace) followed by gas chromatography-electron capture detector (GC-ECD) analysis. The results show very high concentrations of bromoform (up to 1.82 and 3.2 µg L-1 in Tiber and Marta rivers, respectively), due to the presence of greenhouse crops, and of chloroform and tetrachloroethene, due to the presence of handicrafts installations. For the qualitative and quantitative assessment of the inorganic fraction, it is highlighted the use of a nuclear analytical method, instrumental neutron activation analysis, which allows having more information as possible from the sample without performing any chemical-physical pretreatment. The results have evidenced high levels of mercury (mean value 88.6 µg g-1), antimony (77.7 µg g-1), strontium (12,039 µg g-1) and zinc (103 µg g-1), whereas rare earth elements show levels similar to the literature data. Particular consideration is drawn for arsenic (414 µg g-1): the levels found in this paper (ranging between 1 and 5100 µg g-1) explain the high content of such element (as arsenates) in the aquifer, a big issue in this area.

Analytical Method Development and Chemometric Approach for Evidencing Presence of Plasticizer Residues in Nectar Honey Samples.

Over the years, anthropogenic sources have increasingly affected food quality. One of the most sensitive and nutritional matrices affected by chemical contamination is honey, due to the use of acaricides. Recently, the attention has moved to the presence of phthalates (PAEs) and bisphenol A (BP-A), molecules present in plastic materials used both in the production phase and in the conservation of honey. In this study, an analytical method for the simultaneous determination of PAEs (dimethyl phthalate DMP, diethyl phthalate DEP, diisobutyl phthalate DiBP, dibutyl phthalate DBP, bis(2-ethylhexyl) phthalate DEHP, and di-n-octyl-phthalate DnOP) and BP-A was developed. The extraction technique is the ultrasound-vortex-assisted dispersive liquid-liquid microextraction (UVA-DLLME), using 150 µL of toluene as an extraction solvent, followed by the gas chromatography coupled with ion trap mass spectrometry analysis (GC-IT/MS). The developed method is sensitive, reliable, and reproducible: it shows high correlation coefficients (R > 0.999); limits of detection (LODs) less than 11 ng·g-1; limits of quantification (LOQs) less than 16 ng·g-1; repeatability below 3.6%, except BP-A (11.6%); and accuracy below 4.8%, except BP-A (17.6%). The method was applied to 47 nectar honey samples for evidencing similarities among them. The chemometric approach based on Hierarchical Cluster Analysis and Principal Component Analysis evidenced some similitudes about sample origin as well as marked differences between PAE and BP-A sources.

Analytical Scheme for Simultaneous Determination of Phthalates and Bisphenol A in Honey Samples Based on Dispersive Liquid-Liquid Microextraction Followed by GC-IT/MS. Effect of the Thermal Stress on PAE/BP-A Levels.

In this paper, an analytical protocol was developed for the simultaneous determination of phthalates (di-methyl phthalate DMP, di-ethyl phthalate DEP, di-isobutyl phthalate DiBP, di-n-butyl phthalate DBP, bis-(2-ethylhexyl) phthalate DEHP, di-n-octyl phthalate DNOP) and bisphenol A (BPA). The extraction technique used was the ultrasound vortex assisted dispersive liquid-liquid microextraction (UVA-DLLME). The method involves analyte extraction using 75 µL of benzene and subsequent analysis by gas chromatography combined with ion trap mass spectrometry (GC-IT/MS). The method is sensitive, reliable, and reproducible with a limit of detection (LOD) below 13 ng g-1 and limit of quantification (LOQ) below 22 ng g-1 and the intra- and inter-day errors below 7.2 and 9.3, respectively. The method developed and validated was applied to six honey samples (i.e., four single-use commercial ones and two home-made ones. Some phthalates were found in the samples at concentrations below the specific migration limits (SMLs). Furthermore, the commercial samples were subjected to two different thermal stresses (24 h and 48 h at 40 °C) for evidence of the release of plastic from the containers. An increase in the phthalate concentrations was observed, especially during the first phase of the shock, but the levels were still within the limits of the regulations.

Natural products such as adhesives in oil paintings.

The study and analysis of the materials employed in artistic paintings provide deeper knowledge about the history of the work of art, including restoration efforts made in the past, and the development of painting techniques through the centuries. Gas chromatography coupled to mass spectrometry is the main analytical technique employed, as it proved to be the most suitable technique for the analysis of complex mixtures, thanks to its combination of sensitivity, wide range of applicability and versatility. Further, µFT-IR technique has also been employed to get a preliminary screening of the samples taken from paintings. In this paper, the analytical protocol based on these two techniques has been applied for analysing natural terpenic resins; its performance has been tested on microsamples collected from paintings of valuable artistic interest.

Simultaneous determination of organophosphorus pesticides and phthalates in baby food samples by ultrasound-vortex-assisted liquid-liquid microextraction and GC-IT/MS.

Baby foods are either a soft, liquid paste or an easily chewed food since babies lack developed muscles and teeth to chew effectively. Babies typically move to consuming baby food once nursing or formula is not sufficient for the child's appetite. Some commercial baby foods have been criticized for their contents. This article focuses on the simultaneous determination of organophosphorus pesticides and phthalates by means of a method based on ultrasound-vortex-assisted liquid-liquid microextraction coupled with gas chromatography-ion trap mass spectrometry (GC-IT/MS). The protocol developed allowed the determination of six phthalates [dimethyl phthalate, diethyl phthalate, dibutyl phthalate, isobutyl cyclohexyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate] and 19 organophosphorus pesticides. Freeze-dried product samples (0.1-0.2 g) were dissolved in 10 mL of warm distilled water along with 5 µL of an internal standard (anthracene at 10 mg mL-1 in acetone): the choice of extraction solvent was studied, with the most suitable being n-heptane, which is used for phthalate determination in similar matrices. The solution, held for 5 min in a vortex mixer and for 6 min in a 100-W ultrasonic bath to favor solvent dispersion and consequently analyte extraction, was centrifuged at 4000 rpm for 30 min. Then 1 µL was injected into the GC-IT/MS system (SE-54 capillary column; length 30 m, inner diameter 250 µm, film thickness 0.25 µm). All analytical parameters investigated are discussed in depth. The method was applied to real commercial freeze-dried samples: significant contaminant concentrations were not found. Graphical abstract Simultaneous and sensitive determination of organophosphorus pesticides and phthalates in baby foods by the ultrasound-vortex-assisted liquid-liquid microextraction Öªgas chromatography-ion trap mass spectrometry procedure. 1 methacrifos, 2 pirofos, 3 phorate, 4 seraphos, 5 diazinon, 6 etrimphos, 7 dichlofenthion, 8 chlorpyrifos-methyl, 9 pirimiphos-methyl, 10 malathion, 11 chlorpyrifos, 12 parathion-ethyl, 13 pirimiphos-ethyl, 14 bromophos, 15 chlorfenvinphos, 16 bromophos-ethyl, 17 stirophos, 18 diethion, 19 coumaphos, A dimethyl phthalate, B diethyl phthalate, C dibutyl phthalate, D butyl cyclohexyl phthalate, E benzyl butyl phthalate, F bis(2-ethylhexyl) phthalate, IS internal standard.

Fast analysis of phthalates in freeze-dried baby foods by ultrasound-vortex-assisted liquid-liquid microextraction coupled with gas chromatography-ion trap/mass spectrometry.

This paper is focused on the determination of phthalates (PAEs), compounds "plausibly" endocrine disruptors, in baby food products by means of a method based on ultrasound-vortex-assisted liquid-liquid microextraction coupled with GC-IT/MS (UVALLME-GC-IT/MS). Particularly, the whole procedure allows the determination of six phthalates such as DMP, DEP, DBP, iBcEP, BBP and DEHP. After dissolution of 0.1g product sample and addition of anthracene as Internal Standard, 250µL of n-heptane are used as extraction solvent. The solution, held for 5min on the vortex mixer and for 6min in an ultrasonic bath at 100W for favoring the solvent dispersion and consequently the analyte extraction, is centrifuged at 4000rpm for 30min. About 100µL of heptane are recovered and 1µL is injected into the GC-IT/MS. All the analytical parameters investigated are deeply discussed: under the best conditions, the percentage recoveries range between 96.2 and 109.2% with an RSD ≤10.5% whereas the Limit of Detections (LODs) and the Limit of Quantifications (LOQs) are below 11 and 20ngg-1, respectively, for all the PAEs except for iBcEP (23 and 43ngg-1, respectively). The linear dynamic range of this procedure is between 10 and 5000ngg-1 with R2 ≥0.92. The method has been applied to real commercial freeze-dried samples (chicken and turkey meats) available on the Italian pharmaceutical market: three PAEs were preliminary identified, i.e. DEP (14ngg-1), DBP (11ngg-1) and DEHP (64ngg-1).

Visible light caffeic acid degradation by carbon-doped titanium dioxide.

The removal of the phenolic compound, caffeic acid, by photodegradation has been investigated using carbon-doped titanium dioxide particles as a photocatalyst under visible light. UV-vis absorption spectroscopy and gas chromatography-ion trap mass spectrometry analyses revealed a substrate concentration dependence of the removal of caffeic acid from a water solution. The k2 and t(0.5) parameters of each reaction were calculated by fitting kinetics data to a second-order kinetic adsorption model. To evaluate the photodegradation event, the effect of the adsorption process on the whole degradation was also monitored in the absence of light. Adsorption isotherm studies supported by ζ potential and scanning electron microscopy data demonstrated the pivotal role of the absorption mechanism. It was found that the whole photodegradation process is governed by a synergic mechanism in which adsorption and photodegradation are involved. This study, centered on the removal of caffeic acid from aqueous solutions, highlights the potential application of this technology for the elimination of phenolic compounds from olive mill wastewater, a fundamental goal in both the agronomical and environmental fields.

GC models for separation optimization in pressure-tunable tandem capillary columns operated isothermally: part 2: control experiments using a new capillary column interface.

In the previous part of this study, a significant improvement of the fundamental relationships that control GC resolution in a pressure-tunable assembly operating in isothermal conditions inside a single oven was made. A theoretical approach for the correct choice of the working temperature was proposed for the first time. In this second part of our report, a new interfacing device has been proposed for a rapid and reliable alignment of the two columns at the midpoint junction. Moreover, the results of a series of experimental tests have confirmed the validity of the proposed mathematical models.

Study of XAD-2 adsorbent for the enrichment of trace levels of phthalate esters in hydroalcoholic food beverages and analysis by gas chromatography coupled with flame ionization and ion-trap mass spectrometry detectors.

An analytical method based on solid-phase extraction (SPE) with Amberlite XAD-2 adsorbent used as stationary phase for determining phthalate esters (PAEs) in hydroalcoholic food beverages by GC-FID (and peak confirmation by GC-IT/MS) has been set up. The XAD-2 resin shows excellent properties for determining PAEs in solutions at very large alcoholic range (10-40% v/v): 500mL of hydroalcoholic solution spiked with a PAE mixture solution (20pgµL(-1) of each PAE) and containing 25gL(-1) of NaCl are passed onto a cartridge containing 500mg XAD-2 adsorbent and re-extracted for GC analysis. The effects of NaCl concentration (0, 12, 25 and 50gL(-1)) and different solvents (CS2, toluene, acetone, n-hexane, ethyl acetate) are extensively studied as well the PAE recoveries both in hydroalcoholic aqueous solutions (ranging between 94% and 103% with a Relative Standard Deviation, RSD, below 8.3) and spiked (5, 10 and 25pgµL(-1) of each PAE) real samples (between 90% and 106% with a RSD below 9.9). The correlation coefficients (R(2)) of each PAE vary between 0.9830 and 0.9950 and they are calculated in the linear range 5-100pgµL(-1). The limits of detection (LOD) in GC-FID vary between 1.21 and 2.51pgµL(-1) (RSD⩽11.1) whereas the Limits of Quantification (LOQ) range between 2.42 and 5.03pgµL(-1) (RSD⩽8.9) whereas the infra-day and inter-day repeatabilities calculated as RSD for hydroalcoholic solutions, are between 6.5% and 13.7%.

Rapid and simple determination of acrylamide in conventional cereal-based foods and potato chips through conversion to 3-[bis(trifluoroethanoyl)amino]-3-oxopropyl trifluoroacetate by gas chromatography coupled with electron capture and ion trap mass spectrometry detectors.

A new, simple, rapid and fully validated method based on gas chromatography coupled with Electron capture and ion trap mass spectrometry detectors (GC-ECD and GC-IT/MS) is presented for quantitative analysis of acrylamide contaminant in conventional cereal-based foods and potato chips. Before analysis acrylamide was efficiently derivatized with trifluoroacetic anhydride, the effects of temperature, reaction time and catalyst on the acylation reaction were evaluated. Chromatographic analysis was performed on SE-54 capillary column; good retention and peak response of the acrylamide derivative achieved under the optimal conditions. The analytical method has been fully validated by assessment of the following parameters: LODs and LOQs (1 and 25ngg(-1) by GC-ECD and 2 and 36ngg(-1) by GC-IT/MS, with a Relative Standard Deviations <4 and <6, respectively), linearity (R(2) above 0.981 in the range 0.005-50µgg(-1)) and extraction recovery (ranging between 91% and 99%, RSD below 4.0, for acrylamide spiked at levels of 1, 20, 50 and 100ngg(-1)). Furthermore, the method proposed requires no clean-up step of the acrylamide derivative to be performed prior to injection. The developed method has been successfully applied to determine acrylamide in different commercial cereal-based foods (including French fries and potato chips).

Deep investigation on inorganic fraction of atmospheric PM in Mediterranean area by neutron and photon activation analysis.

BACKGROUND: Anthropogenic activities introduce materials increasing levels of many dangerous substances for the environmental quality and being hazardous to human health. Major attention has been given to those elements able to alter the environment and endanger human health.The airborne particulate matter pollutant is considered one of the most difficult task in environmental chemistry for its complex composition and implications complicating notably the behavior comprehension. So, for investigating deeply the elemental composition we used two nuclear techniques, Neutron Activation Analysis and Photon Activation Analysis, characterized by high sensitivity, precision and accuracy. An important task has been devoted to the investigation of Quality Control (QC) and Quality Assurance (QA) of the methodology used in this study.This study was therefore extended as far back as possible in time (from 1965 until 2000) in order to analyze the trend of airborne concentration of pollutant elements in connection with the industrial and lifestyle growth during the entire period. RESULTS: Almost all the elements may be attributed to long-range transport phenomena from other natural and/or anthropogenic sources: this behavior is common to all the periods studied even if a very light decreasing trend can be evidenced from 1970 to 2002. Finally, in order to investigate a retrospective study of elements in PM10 and their evolution in relationship with the natural or anthropogenic origins, we have investigated the Enrichment Factors. The study shows the EF trends for some elements in PM10 during four decades. CONCLUSIONS: The two nuclear techniques have allowed to reach elevated sensibility/accuracy levels for determining elements at very low concentrations (trace and ultra-trace levels). The element concentrations determined in this study do not basically show a significant level of attention from a toxicological point of view.

GC models for separation optimization in pressure-tuneable tandem capillary columns operated isothermally. Part 1: Theoretical aspects.

GC column selectivity can be continuously adapted to suit analytical needs using a flow-tuneable tandem system. Its application for the separation of complex mixtures requires a deep understanding of the theory in this area. Although a number of researchers have developed specific models, a general and exhaustive theory is still missing. In this paper, we have made an implementation of pre-existing models on tandem-column assemblies operated isothermally. In particular, we have investigated the effect of column length and diameter, phase thickness, and oven temperature on chromatographic parameters, such as capacity factor, selectivity, and intrinsic resolution. A new approach for the correct choice of the working temperature has been proposed.

Validation of a novel derivatization method for GC-ECD determination of acrylamide in food.

This paper proposes a new method for quantitative analysis of acrylamide in cereal-based foods and potato chips. The method uses reaction with trifluoroacetic anhydride, and analyses the resulting derivative by use of gas chromatography with electron-capture detection (GC-ECD). The effects of derivatization conditions, including temperature, reaction time, and catalyst, on the acylation reaction were evaluated. Chromatographic analysis was performed on an SE-54 capillary column. Under the optimum conditions, good retention and peak response were achieved for the acrylamide derivative. The analytical method was fully validated by assessment of LODs and LOQs (1 ng g(-1) and 25 ng g(-1), with relative standard deviations (RSD) 2.1 and 3.6, respectively), linearity (R = 0.9935 over the range 0.03-10 µg g(-1)), and extraction recovery (>96%, with RSD below 2.0, for acrylamide spiked at 1, 20, 50, and 100 ng g(-1); 99.8% for acrylamide content >1000 ng g(-1)). The method requires no clean-up of the acrylamide derivative before injection. The method has been successfully used to determine acrylamide levels in different commercial cereal-based foods, French fries, and potato chips.

Rapid analysis of six phthalate esters in wine by ultrasound-vortex-assisted dispersive liquid-liquid micro-extraction coupled with gas chromatography-flame ionization detector or gas chromatography-ion trap mass spectrometry.

An Ultrasound-Vortex-Assisted Dispersive Liquid-Liquid Micro-Extraction (USVADLLME) procedure coupled with Gas Chromatography-Flame Ionization Detector (GC-FID) or Gas Chromatography-Ion Trap Mass Spectrometry (GC-IT/MS) is proposed for rapid analysis of six phthalate esters in hydroalcoholic beverages (alcohol by volume, alc vol(-1), ≤40%). Under optimal conditions, the enrichment factor of the six analytes ranges from 220- to 300-fold and the recovery from 85% to 100.5%. The limit of detection (LOD) and limit of quantification (LOQ) are ≥0.022 µg L(-1) and ≥0.075 µg L(-1), respectively. Intra-day and inter-day precisions expressed as relative standard deviation (RSD), are ≤8.2% and ≤7.0%, respectively. The whole proposed methodology has demonstrated to be simple, reproducible and sensible for the determination of trace phthalate esters in red and white wine samples.

Surface-sampling and analysis of TATP by swabbing and gas chromatography/mass spectrometry.

The method of sample recovery for trace detection and identification of explosives plays a critical role in several criminal investigations. After bombing, there can be difficulties in sending big objects to a laboratory for analysis. Traces can also be searched for on large surfaces, on hands of suspects or on surfaces where the explosive was placed during preparatory phases (e.g. places where an IED was assembled, vehicles used for transportation, etc.). In this work, triacetone triperoxide (TATP) was synthesized from commercial precursors following reported methods. Several portions of about 6mg of TATP were then spread on different surfaces (e.g. floors, tables, etc.) or used in handling tests. Three different swabbing systems were used: a commercial swab, pre-wetted with propan-2-ol (isopropanol) and water (7:3), dry paper swabs, and cotton swabs wetted with propan-2-ol. Paper and commercial swabs were also used to sample a metal plate, where a small charge of about 4g of TATP was detonated. Swabs were sealed in small glass jars with screw caps and Parafilm(®) M and sent to the laboratory for analysis. Swabs were extracted and analysed several weeks later by gas chromatography/mass spectrometry. All the three systems gave positive results, but wetted swabs collected higher amounts of TATP. The developed procedure showed its suitability for use in real cases, allowing TATP detection in several simulations, including a situation in which people wash their hands after handling the explosive.

Sampling of organophosphorus pesticides at trace levels in the atmosphere using XAD-2 adsorbent and analysis by gas chromatography coupled with nitrogen-phosphorus and ion-trap mass spectrometry detectors.

This paper shows an analytical methodology based on solid-phase extraction by XAD-2 adsorbent and gas chromatography (GC) coupled with nitrogen-phosphorus (NPD) and ion-trap mass spectrometry detectors (ITMS) in negative chemical ionization (NCI) mode analyses for investigating organophosphorus pesticides (OPs) at trace levels (in nanograms per cubic meter) in the atmosphere: in particular, we set up a procedure for analyzing 38 OPs. For the analytical methodology linearity responses have been obtained in GC-NPD (r > 0.9982) and GC-NCI/ITMS (r > 0.9974) in a large linearity range (0.10-500 pg µL(-1) in both cases) whereas the limits of detection range between 0.01 and 0.03 pg µL(-1) in both the techniques with a relative standard deviation (RSD) below 9.0 in both cases. Particular attention has been devoted to investigate the effect of different solvents (n-hexane, benzene, chloroform, carbon disulfide, acetonitrile) on the OP recovery as well the breakthrough volumes have been evaluated (100% recovery up to 4,286 L g(-1)). The study has also investigated the OP recoveries at different sampling flow rates (1.5 and 2.0 L min(-1)) for determining the optimal conditions for sample collection. Finally, the whole approach has been successfully applied to real samples collected in four different areas in the Molise region (Central Italy) during different seasons: the results show that parathion-ethyl, dimethoate, omethoate, and malathion are present in all periods at low levels (ranging between 70 and 10 ng m(-3)): their levels in such periods can be correlated with spraying as well atmospheric conditions favoring the dispersion/accumulation of these pollutants.