Influence of pH and dissolved oxygen control strategies on the performance of pilot-scale microalgae raceways using fertilizer or wastewater as the nutrient source.

Dissolved oxygen concentration and pH are controllable and cost-effective variables that determine the success of microalgae-related processes. The present study compares different control strategies for pH and dissolved oxygen in pilot-scale microalgae production systems. Two 80 m2 raceway reactors were used, one operated with freshwater plus fertilizer and the other with wastewater as the nutrient source. Both were in semi-continuous mode at a fixed dilution rate of 0.2 day-1. A comparison between the classical On-Off and more advanced pH control strategies, such as PI and Event-based control, was performed, focusing on biomass productivity and the influence of all the process parameters on microalgae growth; "No control" of pH was also assayed. The results show that Event-based control was the best algorithm when using freshwater plus fertilizer. In contrast, no significant differences were observed using the different control strategies when wastewater was the nutrient source. These experiments were performed through selective control strategy, prioritizing pH over dissolved oxygen; however, it was demonstrated that they did not allow to achieve satisfactory dissolved oxygen removal results, especially for the fertilizer system. After modifying the gas diffuser configuration and improving the mass transfer, independent on-off strategies have been developed, permitting effective control of both variables and increasing productivity by up to 20% in both systems. Concluding, a detailed analysis of the energy demand for each strategy implemented in terms of gas consumption and gas flow to biomass ratio is provided.

Influence of culture media composition on the rheology of microalgae concentrates on a large scale.

The role of microalgae in the production of bioproducts and biofuels, along with their ability to provide a sustainable pathway for wastewater treatment, makes them promising alternatives to conventional processes. Nevertheless, large-scale downstream processing requires an understanding of biomass rheology that needs to be addressed further. This study aimed to characterize microalgal concentrates rheologically in different culture media. The presence of bacteria was quantified by photorespirometry and plate counting techniques. The culture medium was found to significantly influence viscosity, with primary wastewater exhibiting the highest viscosity and seawater plus pig slurry the lowest. The concentration of heterotrophic bacteria was directly related to the viscosity. Extracellular polysaccharides (EPS) in supernatant exhibited an inverse viscosity trend compared to biomass concentrates, with pig slurry cultures having higher concentrations. These findings emphasize the profound influence of culture medium and EPS on the rheology of microalgal biomass, underscoring the need for continued research aimed at facilitating and optimizing large-scale downstream processes within the framework of a circular economy and the attainment of the Sustainable Development Goals (6,8, and 12).

Long-term assessment of the nutrient recovery capacity and biomass productivity of Scenedesmus almeriensis in raceway reactors using unprocessed urban wastewater.

The present work aims to assess the treatment of unprocessed urban wastewater using the microalga Scenedesmus almeriensis. Two 12 m3 raceway reactors, one supplemented by wastewater and the second by chemical fertilizer, operating outdoors in a semi-continuous mode, were used for eight months. Results suggested that S. almeriensis can be produced in wastewater without affecting the photosynthetic apparatus reaching a productivity of 13 g·m-2·day-1 on average in both the systems. Furthermore, the nutrient content in terms of nitrogen, phosphorous and chemical oxygen demand of the wastewater was reduced under the European limitations during most of the period, with an average removal rate of 2.2, 0.2 and 3.0 g·m-2·day-1 respectively. Therefore, raceways demonstrated a high potential for microalgal production and successful biotreatment, proving robust and reliable. Finally, the effect of environmental conditions on biomass productivity of the clean system was evaluated in a model with high accuracy (R2 = 0.9, p = 0.0002).

Profiling microalgal cultures growing on municipal wastewater and fertilizer media in raceway photobioreactors.

Microalgae cultivation is proposed as an effective system for pathogens reduction and wastewater depuration, however, a full characterisation of the risks is still needed. Two raceways were inoculated with Scenedesmus, one using wastewater and the other using a fertilizer medium. Microbial community and pathogen presence were explored by next generation sequencing (NGS), commercial qPCR array and plate counts. These methods proved to be complementary for a full characterization of community structure and potential risks. Media and sampling locations contributed to shape communities and pathogenic loads. The main pathogenic genera detected were Arcobacter and Elizabethkingia (mainly in wastewater) with an important presence of Aeromonas (all samples). A lower presence of pathogens was detected in fertilizer samples, while wastewater showed a reduction from inlet to outlet. Raceways showed potential as an effective biotreatment, with most of the retained pathogens released in the outlet and only a minor part settled in the biomass.

A seasonal simulation approach for culture depth influence on the temperature for different characterized microalgae strains.

Irradiance and temperature are among the most important variables that affect microalgae growth, being both difficult to control in outdoor raceway reactors utilized for large-scale production of microalgae biomass. They are mainly a function of the location of the reactors, thus, producing certain strains of microalgae in inappropriate places conduces to the failure of the systems. To be able to determine important parameters of any microalgae strains on the performance of the culture, such as the influence of irradiance and temperature, is a powerful tool in decision-making processes. In addition, whatever the strain and location, operation strategies must be defined for each specific case, such as the imposed dilution rate and culture depth, both influencing the light availability and temperature of the culture as major variables determining the biomass productivity. In this paper, a simulation-based methodology is proposed to establish the influence of season and culture depth on the 1-year age irradiance and temperature of the culture, and thus on the biomass productivity of different microalgae strains. Up to five of the most frequently produced strains, such as Spirulina platensis, Chlorella vulgaris, Nannochloropsis gaditana, Isochrysis galbana, and Scenedesmus almeriensis have been considered. The challenge is to develop an easy-to-manage decision-making tool for the optimal design and operation of large-scale microalgae facilities. Especially, dates for microalgae production and culture depth at which the reactors must be operated will be provided, being valid for any microalgae strain. The proposed methodology will largely contribute to the risk of investment in this field, then to enlarge the relevance of the microalgae production industry.

Characterisation of the volatile profile of microalgae and cyanobacteria using solid-phase microextraction followed by gas chromatography coupled to mass spectrometry.

Microalgae and microalgae-derived ingredients are one of the top trends in the food industry. However, consumers' acceptance and purchase intention of a product will be largely affected by odour and flavour. Surprisingly, the scientific literature present a very limited number of studies on the volatile composition of microalgae and cyanobacteria. In order to fill the gap, the main objective of the present study was to elucidate the volatile composition of seven microalgal and cyanobacterial strains from marine and freshwaters, with interest for the food industry while establishing its potential impact in odour. Among the seven selected strains, Arthrospira platensis showed the highest abundance and chemical diversity of volatile organic compounds (VOCs). Aldehydes, ketones, and alcohols were the families with the highest diversity of individual compounds, except in Arthrospira platensis and Scenedesmus almeriensis that showed a profile dominated by branched hydrocarbons. Marine strains presented a higher abundance of sulfur compounds than freshwater strains, while the ketones individual profile seemed to be more related to the taxonomical domain. The results of this study indicate that the VOCs composition is mainly driven by the individual strain although some volatile profile characteristics could be influenced by both environmental and taxonomical factors.

Microalgae based wastewater treatment coupled to the production of high value agricultural products: Current needs and challenges.

One of the main social and economic challenges of the 21st century will be to overcome the worlds' water deficit expected by the end of this decade. Microalgae based wastewater treatment has been suggested as a strategy to recover nutrients from wastewater while simultaneously producing clean water. Consortia of microalgae and bacteria are responsible for recovering nutrients from wastewater. A better understanding of how environmental and operational conditions affect the composition of the microalgae-bacteria consortia would allow to maximise nutrient recoveries and biomass productivities. Most of the studies reported to date showed promising results, although up-scaling of these processes to reactors larger than 100 m2 is needed to better predict their industrial relevance. The main advantage of microalgae based wastewater treatment is that valuable biomass with unlimited applications is produced as a co-product. The aim of the current paper was to review microalgae based wastewater treatment processes focusing on strategies that allow increasing both biomass productivities and nutrient recoveries. Moreover, the benefits of microalgae based agricultural products were also discussed.

Annual assessment of the wastewater treatment capacity of the microalga Scenedesmus almeriensis and optimisation of operational conditions.

The depth of the culture and the dilution rate have a striking effect on the biomass productivity and the nutrient recovery capacity of microalgal cultures. The combination of culture depth and dilution rate that allows to maximise the performance of the system depends on environmental conditions. In the current study, a response surface methodology was used to explore the relationship between the two most relevant operational conditions and the biomass productivity achieved in 8.3 m2 pilot-scale raceways operated using urban wastewater. Four polynomial models were developed, one for each season of the year. The software predicted biomass productivities of 12.3, 25.6, 32.7, and 18.9 g·m-2·day-1 in winter, spring, summer, and autumn, respectively. The models were further validated at pilot-scale with R2 values ranging within 0.81 and 0.91, depending on the season. Lower culture depths had the advantage of minimising nitrification and stripping but allow to process a lower volume of wastewater per surface area. Biomass productivity was higher at culture depths of 0.05 m, when compared to 0.12 and 0.20 m, while the optimal dilution rate was season-dependent. Results reported herein are useful for optimising the biomass productivity of raceway reactors located outdoors throughout the year.

Microalgae Derived Astaxanthin: Research and Consumer Trends and Industrial Use as Food.

Astaxanthin is a high-value carotenoid currently being produced by chemical synthesis and by extraction from the biomass of the microalga Haematococcus pluvialis. Other microalgae, such as Chlorella zofingiensis, have the potential for being used as sources of astaxanthin. The differences between the synthetic and the microalgae derived astaxanthin are notorious: not only their production and price but also their uses and bioactivity. Microalgae derived astaxanthin is being used as a pigment in food and feed or aquafeed production and also in cosmetic and pharmaceutical products. Several health-promoting properties have been attributed to astaxanthin, and these were summarized in the current review paper. Most of these properties are attributed to the high antioxidant capacity of this molecule, much higher than that of other known natural compounds. The aim of this review is to consider the main challenges and opportunities of microalgae derived products, such as astaxanthin as food. Moreover, the current study includes a bibliometric analysis that summarizes the current research trends related to astaxanthin. Moreover, the potential utilization of microalgae other than H. pluvialis as sources of astaxanthin as well as the health-promoting properties of this valuable compound will be discussed.

Modeling of photosynthesis and respiration rate for microalgae-bacteria consortia.

In this article, the influence of culture conditions (irradiance, temperature, pH, and dissolved oxygen) on the photosynthesis and the respiration rates of microalgae-bacteria consortia in wastewater treatment was analyzed. Specifically, some short photo-respirometric experiments, simulating outdoor raceway reactors, were performed to evaluate the response of microalgae, heterotrophic bacteria, and nitrifying bacteria to variations in environmental parameters. Results demonstrate that irradiance is the most dominant variable to determine microalgae photosynthesis rates. However, reduction in microalgae activity was not observed at higher irradiance, ruling out the existence of photoinhibition phenomena. Related to heterotrophic and nitrifying bacteria, their activities were strongly affected by the influence of temperature and pH. Moreover, the effect of dissolved oxygen concentrations on microalgae, and bacteria activities was studied, displaying a reduced photosynthetic rate at dissolved oxygen concentrations above 20 mg/L. Data have been used to develop an integrated model for each population (microalgae, heterotrophic bacteria, and nitrifying bacteria) based on considering the simultaneous influence of irradiance, temperature, pH, and dissolved oxygen. The models fit the experimental results in the range of culture conditions tested, and they were validated using data obtained by the simultaneous modifications of the variables. These individual models serve as a basis for developing a global biologic microalgae-bacteria model for wastewater treatment to improve the optimal design and management of microalgae-based processes, especially outdoors, where the cultures are subject to variable daily culture conditions.