Nanoengineering of mono (Au, Ag) and bimetallic (Ag-Au) alloy nanoparticles for dye degradation and toxicity assessment.

This research entails the synthesis and catalytic exploration of bimetallic nanoparticles combining silver (Ag) and gold (Au). The Au concentration was systematically varied (20%, 40%, 60%, and 80%), alongside the utilization of CTAB surfactant for nanoparticle stabilization. UV visible spectroscopic analysis confirmed the formation and stability of synthesized Au, Ag and bimetallic (Ag-Au) nanoparticles. FESEM further confirmed the formation of uniform sized Au and Ag nanoparticles. Integration of Au into Ag resulted in bimetallic (Ag-Au) alloy nanoparticles with smaller dimensions as compared to individual Au and Ag nanoparticles. EDX spectra and mapping verified the composition of each synthesized bimetallic nanoparticle variant. The catalytic potential of the synthesized nanoparticles was methodically explored using UV-visible spectroscopy. All the synthesized nanoparticles showcased excellent catalytic efficacy. The synergistic effect of the alloyed bimetallic nanoparticles was found promising. Assessment of dye toxicity pre- and post-degradation was conducted using the ECOSAR program, indicating a reduction in dye toxicity following degradation.

Exploration of anode candidacy of Ni0.2Co2.8O4 and integrated Ni0.2Co2.8O4/MWCNTs in supercapacitor and oxygen evolution reaction.

In the current research work, Ni0.2Co2.8O4 and Ni0.2Co2.8/MWCNTs have been synthesized via facile sol-gel and wet impregnation method. The synthesized materials attained the crystalline structures as evident from X-ray diffraction analysis (XRD). The uniform morphology and well dispersion of Ni0.2Co2.8O4 onto MWCNTs was observed via scanning electron microscopy (SEM). The electrochemical investigations for supercapacitor application by cyclic voltammetry (CV), galvanostatic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) revealed that, among both materials, Ni0.2Co2.8O4/MWCNTs has high specific capacitance (CV; 505.8 Fg-1 at 5 mV/s, GCD; 1598 Fg-1 at 0.5 A/g), greater capacitance retention (85 %) at 1000 cycles and has lower charge transfer resistance (Rct; 3.48 Ω cm2). These findings reflected the potential candidacy of Ni0.2Co2.8O4/MWCNTs to be used as anode material in supercapacitor. Further investigations by CV and linear sweep voltammetry (LSV) for oxygen evolution reaction (OER) activity in 1.0 M KOH showed comparatively low over potential of 340 mV @100 mA/cm2 for the same integrated material. Additionally, the lower Tafel slope (47 mV/dec) and solution resistance authenticated it as an appropriate electrocatalyst for OER in water splitting. The CPE (controlled potential electrolysis) revealed the stability of both materials for OER in water oxidation.

A concise overview of advancements in ultrasensitive biosensor development.

Electrochemical biosensing has evolved as a diverse and potent method for detecting and analyzing biological entities ranging from tiny molecules to large macromolecules. Electrochemical biosensors are a desirable option in a variety of industries, including healthcare, environmental monitoring, and food safety, due to significant advancements in sensitivity, selectivity, and portability brought about by the integration of electrochemical techniques with nanomaterials, bio-recognition components, and microfluidics. In this review, we discussed the realm of electrochemical sensors, investigating and contrasting the diverse strategies that have been harnessed to push the boundaries of the limit of detection and achieve miniaturization. Furthermore, we assessed distinct electrochemical sensing methods employed in detection such as potentiometers, amperometers, conductometers, colorimeters, transistors, and electrical impedance spectroscopy to gauge their performance in various contexts. This article offers a panoramic view of strategies aimed at augmenting the limit of detection (LOD) of electrochemical sensors. The role of nanomaterials in shaping the capabilities of these sensors is examined in detail, accompanied by insights into the chemical modifications that enhance their functionality. Furthermore, our work not only offers a comprehensive strategic framework but also delineates the advanced methodologies employed in the development of electrochemical biosensors. This equips researchers with the knowledge required to develop more accurate and efficient detection technologies.

Removal of organic pollutants through hydroxyl radical-based advanced oxidation processes.

The use of Advance Oxidation Process (AOPs) has been extensively examined in order to eradicate organic pollutants. This review assesses the efficacy of photolysis, O3 based (O3/UV, O3/H2O2, O3/H2O2/UV, H2O2/UV, Fenton, Fenton-like, hetero-system) and sonochemical and electro-oxidative AOPs in this regard. The main purpose of this review and some suggestions for the advancement of AOPs is to facilitate the elimination of toxic organic pollutants. Initially proposed for the purification of drinking water in 1980, AOPs have since been employed for various wastewater treatments. AOPs technologies are essentially a process intensification through the use of hybrid methods for wastewater treatment, which generate large amounts of hydroxyl (•OH) and sulfate (SO4·-) radicals, the ultimate oxidants for the remediation of organic pollutants. This review covers the use of AOPs and ozone or UV treatment in combination to create a powerful method of wastewater treatment. This novel approach has been demonstrated to be highly effective, with the acceleration of the oxidation process through Fenton reaction and photocatalytic oxidation technologies. It is clear that Advance Oxidation Process are a helpful for the degradation of organic toxic compounds. Additionally, other processes such as •OH and SO4·- radical-based oxidation may also arise during AOPs treatment and contribute to the reduction of target organic pollutants. This review summarizes the current development of AOPs treatment of wastewater organic pollutants.

Green synthesised AuNps using Ajuga Bracteosa extract and AuNps-Free supernatant exhibited equivalent antibacterial and anticancerous efficacies.

The current study is designed to synthesize gold nanoparticles using Ajuga bracteosa extract, which is a highly known medicinal herb found in the northern Himalayas. The synthesized gold nanoparticles were initially characterized by UV-Vis spectrophotometer, SEM, FTIR, pXRD, and, GC-MS. Antibacterial efficacy of A. bracteosa extract, AuNps, and AuNps-free supernatant activity was checked against highly pathogenic clinical isolates of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa via agar well diffusion method, assuming that supernatant might have active compounds. The Nps-free supernatant showed the maximum antibacterial activity against E. coli (20.8±0.3 mm), Staphylococcus aureus (16.5±0.5), and Pseudomonas aeruginosa (13±0.6). While green synthesized AuNps showed effective antibacterial activity (Escherichia coli (16.4±0.3mm), Staphylococcus aureus (15.05±0.5mm), and Pseudomonas aeruginosa (11.07±0.6mm)) which was high compared to A. bracteosa extract. Anticancer activity was assessed by MTT assay on U87 and HEK293 cell lines. Aj-AuNps have an antigrowth effect on both the cell lines however Aj-AuNps-free supernatant which was also evaluated along with the Aj-AuNps, showed high toxicity toward HEK293 cell line compared to U87. Further, the GC-MS analysis of supernatant showed the presence of resultant toxic compounds after the reduction of gold salt, which include Trichloromethane, Propanoic acid, 2-methyl-, methyl ester, Methyl isovalerate, Pentanoic acid, 2-hydroxy-4-methyl-, Benzene-propanoic acid, and alpha-hydroxy. Based on the observation small molecular weight ligands of Ajuga bracteosa were analyzed in-silico for their binding efficacy towards selected membrane proteins of our target pathogens. RMSD is also calculated for the best docked protein ligand pose. The results revealed that among all listed ligands, Ergosterol and Decacetylajugrin IV have high virtuous binding affinities towards the membrane proteins of targeted pathogens. The current findings revealed that the Aj-AuNps are good antibacterial as well as anticancerous agents while the Nps-free supernatant is also exceedingly effective against resistant pathogens and cancer cell lines.

Green synthesis of lead oxide nanoparticles for photo-electrocatalytic and antimicrobial applications.

Synthesis of nanoparticles (NPs) for many different uses requires the development of environmentally friendly synthesis protocols. In this article, we present a simple and environmentally friendly method to synthesize lead oxide (PbO) NPs from the plant material of the Mangifera indica. Analytical techniques such as spectroscopy, X-ray diffraction, and microscopy were used to characterize the synthesized PbO NPs, and their photo-electrocatalytic and antifungal properties were also evaluated. H2O2 was used to investigate the efficacy of removing methylene blue dye. At a range of pH values, H2O2 was used to study the role of hydroxyl radicals in the breakdown of methylene blue dye. Methylene blue dyes are more easily eliminated due to increased generation of the *OH radical during removal. Dye degradation was also significantly affected by the aqueous medium's pH. Additionally, the electrocatalytic properties of the PbO NPs adapted electrode were studied in CH3COONa aqueous solution using cyclic voltammetry. Excellent electrocatalytic properties of the PbO NPs are shown by the unity of the anodic and cathodic peaks of the modified electrode in comparison to the stranded electrode. Aspergillus flavus, Aspergillus niger, and Candida glabrata were some fungi tested with the PbO NPs. Against A. flavus (40%) and A. niger (50%), and C. glabrata (75%), the PbO NPs display an excellent inhibition zone. Finally, PbO NPs were used in antioxidant studies with the powerful antioxidant 2, 2 diphenyl-1-picrylhydrazyl (DPPH). This study presents a simple and environmentally friendly method for synthesizing PbO NPs with multiple uses, including photo-electrocatalytic and antimicrobial activity.

Flavonoid-DNA binding studies and thermodynamic parameters.

Interactional studies of new flavonoid derivatives (Fl) with chicken blood ds.DNA were investigated spectrophotometrically in DMSO-H2O (9:1 v/v) at various temperatures. Spectral parameters suggest considerable binding between the flavonoid derivatives studied and ds.DNA. The binding constant values lie in the enhanced-binding range. Thermodynamic parameters obtained from UV studies also point to strong spontaneous binding of Fl with ds.DNA. Viscometric studies complimented the UV results where a small linear increase in relative viscosity of the DNA solution was observed with added optimal flavonoid concentration. An overall mixed mode of interaction (intercalative plus groove binding) is proposed between DNA and flavonoids. Conclusively, investigated flavonoid derivatives are found to be strong DNA binders and seem to be promising drug candidates like their natural analogues.

Spectrophotometric analysis of flavonoid-DNA binding interactions at physiological conditions.

Mode of interactions of three flavonoids [morin (M), quercetin (Q), and rutin (R)] with chicken blood ds.DNA (ck.DNA) has been investigated spectrophotometrically at different temperatures including body temperature (310 K) and at two physiological pH values, i.e. 7.4 (human blood pH) and 4.7 (stomach pH). The binding constants, K(f), evaluated using Benesi-Hildebrand equation showed that the flavonoids bind effectively through intercalation at both pH values and body temperature. Quercetin, somehow, showed greater binding capabilities with DNA. The free energies of flavonoid-DNA complexes indicated the spontaneity of their binding. The order of binding constants of three flavonoids at both pH values were found to be K(f(Q)) > K(f(R)) > K(f(M)) and at 310 K.