ABSTRACT
Previous research on cold-formed steel (CFS) battened columns has identified the critical factors influencing their performance and accordingly, their limiting values for improved performance have been recommended. However, these studies involved connecting battens to the chords (channels) via their flanges, leaving the slenderest component disconnected from the web. This study introduces a novel hooped-batten (tubular-element) that links both webs and flanges of the chords together, thereby improving the structural integrity of the built-up system and curtailing the half-wave buckling length in the webs. As a result, axial strength and stability in these built-up columns may improve adequately. Firstly, a numerical model of a conventional CFS battened column was developed in ABAQUS and verified against test results on the same reported in literature. Afterward, the validated model was used to simulate the behaviour of CFS built-up columns with hooped-battens. Two key parameters i.e., unbraced chord slenderness and overall column slenderness were varied to explore their influence on the axial behaviour of built-up columns in terms of peak strengths, failure modes and load-displacement characteristics. The performance of the hooped-battened columns was compared with the identical conventional battened columns, which reflects that the former exhibits superior strength and stability characteristics over the latter.