ABSTRACT
Despite rapid technological progress, heavy metal water pollution, particularly arsenic contamination, remains a significant global challenge. The stabilization of trivalent arsenic as neutral arsenite (AsIII) species hinders its removal by conventional adsorption methods. While adsorption of anionic arsenate (AsV) species is in principle more feasible, there are only a few adsorbents capable of adsorbing both forms of arsenic. In this work we study the potential of two well-known families of Metal-Organic Frameworks (MOFs), UiO-66 and MIL-125, to simultaneously adsorb and photo-oxidize arsenic species from water. Our results demonstrate that the formation of AsV ions upon light irradiation promotes the subsequent adsorption of additional AsIII species. Thus, we propose the combined utilization of photocatalysis and adsorption technologies for water remediation purposes.
ABSTRACT
Melt electrowriting (MEW) is an emerging additive manufacturing (AM) technology that enables the precise deposition of continuous polymeric microfibers, allowing for the creation of high-resolution constructs. In recent years, MEW has undergone a revolution, with the introduction of active properties or additional functionalities through novel polymer processing strategies, the incorporation of functional fillers, postprocessing, or the combination with other techniques. While extensively explored in biomedical applications, MEW's potential in other fields remains untapped. Thus, this review explores MEW's characteristics from a materials science perspective, emphasizing the diverse range of materials and composites processed by this technique and their current and potential applications. Additionally, the prospects offered by postprinting processing techniques are explored, together with the synergy achieved by combining melt electrowriting with other manufacturing methods. By highlighting the untapped potentials of MEW, this review aims to inspire research groups across various fields to leverage this technology for innovative endeavors.
ABSTRACT
The incorporation of 3D-printing principles with electrohydrodynamic (EHD) jetting provides a harmonious balance between resolution and processing speed, allowing for the creation of high-resolution centimeter-scale constructs. Typically, EHD jetting of polymer melts offers the advantage of rapid solidification, while processing polymer solutions requires solvent evaporation to transition into solid fibers, creating challenges for reliable printing. This study navigates a hybrid approach aimed at minimizing printing instabilities by combining viscous solutions and achieving rapid solidification through freezing. Our method introduces and fully describes a modified open-source 3D printer equipped with a frozen collector that operates at -35 °C. As a proof of concept, highly concentrated silk fibroin aqueous solutions are processed into stable micrometer scale jets, which rapidly solidify upon contact with the frozen collector. This results in the formation of uniform microfibers characterized by an average diameter of 27 ± 5 µm, a textured surface, and porous internal channels. The absence of instabilities and the notably fast direct writing speed of 42 mm·s-1 enable precise, fast, and reliable deposition of these fibers into porous constructs spanning several centimeters. The effectiveness of this approach is demonstrated by the consistent production of biologically relevant scaffolds that can be customized with varying pore sizes and shapes. The achieved degree of control over micrometric jet solidification and deposition dynamics represents a significant advancement in EHD jetting, particularly within the domain of aqueous polymer solutions, offering new opportunities for the development of intricate and functional biological structures.
Subject(s)
Fibroins , Tissue Scaffolds/chemistry , Polymers/chemistry , Water , Printing, Three-DimensionalABSTRACT
This study demonstrates how either a heated flat or cylindrical collector enables defect-free melt electrowriting (MEW) of complex geometries from high melting temperature polymers. The open-source "MEWron" printer uses nylon-12 filament and combined with a heated flat or cylindrical collector, produces well-defined fibers with diameters ranging from 33 ± 4 to 95 ± 3 µm. Processing parameters for stable jet formation and minimal defects based on COMSOL thermal modeling for hardware design are optimized. The balance of processing temperature and collector temperature is achieved to achieve auxetic patterns, while showing that annealing nylon-12 tubes significantly alters their mechanical properties. The samples exhibit varied pore sizes and wall thicknesses influenced by jet dynamics and fiber bridging. Tensile testing shows nylon-12 tubes are notably stronger than poly(ε-caprolactone) ones and while annealing has limited impact on tensile strength, yield, and elastic modulus, it dramatically reduces elongation. The equipment described and material used broadens MEW applications for high melting point polymers and highlights the importance of cooling dynamics for reproducible samples.
Subject(s)
Tissue Engineering , Tissue Scaffolds , Polymers , NylonsABSTRACT
Acute CrVI water pollution due to anthropogenic activities is an increasing worldwide concern. The high toxicity and mobility of CrVI makes it necessary to develop dual adsorbent/ion-reductive materials that are able to capture CrVI and transform it efficiently into the less hazardous CrIII . An accurate description of chromium speciation at the adsorbent/ion-reductive matrix is key to assessing whether CrVI is completely reduced to CrIII , or if its incomplete transformation has led to the stabilization of highly reactive, transient CrV species within the material. With this goal in mind, a dual ultraviolet-visible and electron paramagnetic spectroscopy approach has been applied to determine the chromium speciation within zirconium-based metal-organic frameworks (MOFs). Our findings point out that the generation of defects at Zr-MOFs boosts CrVI adsorption, whilst the presence of reductive groups on the organic linkers play a key role in stabilizing it as isolated and/or clustered CrIII ions.
