Association of Elevated Serum Branched-chain Amino Acid Levels With Longitudinal Skeletal Muscle Loss.

Context: Branched-chain amino acids (BCAA) are substrates for protein synthesis. Although their intake may contribute to an increase in skeletal muscle mass, elevated serum BCAA levels have been reported to be associated with insulin resistance, potentially resulting in decreased skeletal muscle mass. Objective: This study aimed to explore the association between elevated serum BCAA levels and longitudinal skeletal muscle loss. Design and Setting: A cohort analysis was conducted, in which serum amino acids were analyzed in healthy individuals who underwent a medical health checkup at Kameoka Municipal Hospital (HOZUGAWA study), Japan. Patients: Seventy-one participants (37 men and 34 women) underwent follow-up checkups after the baseline visit. The follow-up duration was 1.2 ± .4 years. Main Outcome Measures: The relationship between fasting baseline serum BCAA levels and lifestyle factors, body composition, blood test results, dietary history, and changes in skeletal muscle mass was evaluated. Results: In both men and women, serum BCAA levels were positively correlated with body weight, body mass index, skeletal muscle mass index (SMI), and serum triglycerides but inversely correlated with serum high-density lipoprotein cholesterol. In men, fasting serum BCAA levels were inversely associated with the rate of change in SMI (adjusted ß = -.529, P = .006), and elevated BCAA levels were independently associated with a longitudinal decrease in skeletal muscle mass (odds ratio: 1.740; 95% confidence interval: 1.023-2.960 per 50 nmol/mL serum BCAAs increase). Conclusion: Increased circulating BCAAs could be an indicator of skeletal muscle loss in men.

Inulin reduces visceral adipose tissue mass and improves glucose tolerance through altering gut metabolites.

AIM: Inulin, a soluble dietary fiber, is a source of energy for the host while the metabolites, such as short-chain fatty acids (SCFAs), produced in the gut through bacterial fermentation exerts the anti-obesity effect. In this study, we aimed to apply a metabolomics approach and clarify the role of this soluble dietary fiber on glucose and lipid metabolism under the calorie-matched condition. MATERIALS AND METHODS: Eight-week-old male C57BL/6J mice were fed a high-fat/high-sucrose based diet containing maltodextrin or inulin for 12 weeks through calorie-matched pair feeding. We evaluated glucose tolerance, and energy expenditure using indirect calorimetry, comprehensive metabolites in the content of jejunum, feces, and portal vein serum using gas chromatography-mass spectrometry, and histological changes in the adipose tissue. RESULTS: The inulin group exhibited reduced visceral adipose tissue and smaller size of visceral adipocyte. It also exhibited improved glucose tolerance and an increase in energy expenditure. Reflecting the results of fermentation, the metabolomics analysis revealed an increase in the succinic acid and SCFA contents in both feces and portal vein serum in the inulin group. CONCLUSIONS: Inulin altered the gut metabolites and reduced visceral adipose tissue, thereby resulting in improved glucose tolerance.

Freeze-drying enables homogeneous and stable sample preparation for determination of fecal short-chain fatty acids.

BACKGROUND: The analysis methods for fecal short-chain fatty acids (SCFAs) have evolved considerably. Recently, the role of SCFAs in gastrointestinal physiology and their association with intestinal microbiota and disease were reported. However, the intra-fecal variability and storage stability of SCFAs have not been extensively investigated. The aim of this study was to understand the limitations of the measurement of SCFAs in crude feces and develop a useful pre-examination procedure using the freeze-drying technique. METHODS: SCFAs in crude feces, obtained from healthy volunteers, and freeze-dried feces were determined by derivatization with isobutyl chloroformate, followed by liquid-liquid extraction with hexane, and separation and analysis using gas chromatography-mass spectrometry. RESULTS: Among the SCFAS, the maximum intra-fecal variability was observed for iso-butyrate (coefficient of variation of 37.7%), but the freeze-drying procedure reduced this variability (coefficient of variation of 7.9%). Similar improvements were also observed for other SCFAs. Furthermore, significant decreases in the SCFA amounts were observed with storage at 4 °C for 24 h. CONCLUSIONS: The freeze-drying procedure affords fecal SCFA stability, even with storage at room temperature for 3 d. The freeze-drying procedure allows reliable SCFA measurements without labour-intensive processes. Therefore, the freeze-drying procedure can be applied in basic, clinical, and epidemiological studies.

Direct methyl esterification with 2,2-dimethoxypropane for the simultaneous determination of urinary metabolites of toluene, xylene, styrene, and ethylbenzene by gas chromatography-mass spectrometry.

OBJECTIVES: The purpose of this study was to develop a simple and accurate gas chromatography-mass spectrometry (GC-MS) method for simultaneous determination of four urinary metabolites from four organic solvents, that is, hippuric acid (HA) from toluene, methylhippuric acid (MHA) from xylene, and mandelic acid (MA) and phenylglyoxylic acid (PGA) from styrene or ethylbenzene for biological monitoring. METHODS: The four metabolites were directly methyl-esterified with 2,2-dimethoxypropane and analyzed using GC-MS. The proposed method was validated according to the US Food and Drug Administration guidance. The accuracy of the proposed method was confirmed by analyzing a ClinChek® -Control for occupational medicine (RECIPE Chemicals +Instruments GmbH). RESULTS: Calibration curves showed linearity in the concentration range of 10-1000 mg/L for each metabolite, with correlation coefficients >0.999. For each metabolite, the limits of detection and quantification were 3 mg/L and 10 mg/L, respectively. The recovery was 93%-117%, intraday accuracy, expressed as the deviation from the nominal value, was 92.7%-103.0%, and intraday precision, expressed as the relative standard deviation (RSD), was 1.3%-4.7%. Interday accuracy and precision were 93.4%-104.0% and 1.2%-9.5%, respectively. The analytical values of ClinChek obtained using the proposed method were sufficiently accurate. CONCLUSIONS: The proposed method is a simple and accurate which is suitable for routine analyses that could be used for biological monitoring of occupational exposure to four organic solvents.

A method for routine analysis of urinary 4,4'-methylenebis (2-chloroaniline) by gas chromatography-electron capture detection.

OBJECTIVES: The purpose of this study was to develop a simple and cost-effective method for the determination of urinary 4,4'-methylenebis (2-chloroaniline) (MBOCA) by gas chromatography-electron capture detection (GC-ECD) for biological monitoring of occupational exposure to MBOCA. METHODS: MBOCA was prepared by liquid-liquid extraction after alkaline hydrolysis, derivatized with N-methyl-bis (trifluoroacetamide) and then analyzed using GC-ECD. The proposed method was validated in accordance with the US Food and Drug Administration guidance. RESULTS: The calibration curve showed linearity in the range 1-100 µg/l, with a correlation coefficient of >0.999. The limits of detection and quantification were 0.3 µg/l and 1 µg/l, respectively. The recovery was 94-99%. Intraday accuracy, expressed as the deviation from the nominal value, was 90.5-100.3%, and intraday precision, expressed as the relative standard deviation, was 0.3-2.4%. Interday accuracy and precision were 87.8-100.2% and 0.3-4.1%, respectively. CONCLUSIONS: The proposed method is a simple and cost-effective method suitable for routine analyses and could be useful for biological monitoring of occupational exposure to MBOCA.

Highly sensitive and selective analysis of widely targeted metabolomics using gas chromatography/triple-quadrupole mass spectrometry.

In metabolomics studies, gas chromatography coupled with time-of-flight or quadrupole mass spectrometry has frequently been used for the non-targeted analysis of hydrophilic metabolites. However, because the analytical platform employs the deconvolution method to extract single-metabolite information from co-eluted peaks and background noise, the extracted peak is artificial product depending on the mathematical parameters and is not completely compatible with the pure component obtained by analyzing a standard compound. Moreover, it has insufficient ability for quantitative metabolomics. Therefore, highly sensitive and selective methods capable of pure peak extraction without any complicated mathematical techniques are needed. For this purpose, we have developed a novel analytical method using gas chromatography coupled with triple-quadrupole mass spectrometry (GC-QqQ/MS). We developed a selected reaction monitoring (SRM) method to analyze the trimethylsilyl derivatives of 110 metabolites, using electron ionization. This methodology enables us to utilize two complementary techniques-non-targeted and widely targeted metabolomics in the same sample preparation protocol, which would facilitate the formulation or verification of novel hypotheses in biological sciences. The GC-QqQ/MS analysis can accurately identify a metabolite using multichannel SRM transitions and intensity ratios in the analysis of living organisms. In addition, our methodology offers a wide dynamic range, high sensitivity, and highly reproducible metabolite profiles, which will contribute to the biomarker discoveries and quality evaluations in biology, medicine, and food sciences.

Development of an analytical method for the determination of arsenic in urine by gas chromatography-mass spectrometry for biological monitoring of exposure to inorganic arsenic.

OBJECTIVES: The purpose of this study was to develop an analytical method for the simultaneous determination of inorganic arsenic [As(III) and As(V)] and monomethylarsonic acid (MMA) in urine by gas chromatography-mass spectrometry (GC-MS) for the biological monitoring of exposure to inorganic arsenic. METHODS: Arsenic compounds (after reduction of arsenic to the trivalent state) were derivatized with 2,3-dimercapto-1-propanol and then analyzed using a GC-MS. The proposed method was validated according to the US Food and Drug Administration guidelines. The accuracy of the proposed method was confirmed by analyzing Standard Reference Material (SRM) 2669 (National Institute of Standards and Technology). RESULTS: Calibration curves showed linearity in the range 1-100 µg/l for each of the arsenic species, with correlation coefficients of >0.999. For each of the arsenic species, the limits of detection and quantification were 0.2 µg/l and 1 µg/l, respectively. The recoveries were 96-100%, 99-102% and 99-112% for As(III), As(V) and MMA, respectively. Intraday accuracy and precision were 82.7-99.8% and 0.9-7.4%, respectively. Interday accuracy and precision were 81.3-100.0% and 0.8-9.9%, respectively. The analytical values of SRM 2669 obtained by the proposed method were sufficiently accurate. CONCLUSIONS: The proposed method overcame the disadvantages of high-performance liquid chromatography with inductively coupled plasma mass spectrometry. It was a robust, selective and cost-effective method suitable for routine analyses and could be useful for the biological monitoring of occupational exposure to inorganic arsenic.

Determination method for xylidines in workplace air.

OBJECTIVES: The purpose of this research was to develop a determination method for xylidines (XLDs) in workplace air for risk assessment. METHODS: The characteristics of the proposed method, such as recovery, detection limit, reproducibility, and storage stability of the samples were examined. RESULTS: An air sampler cassette containing two sulfuric acid-treated glass fiber filters was chosen as the sampler. The XLDs were extracted from the sampler filters, derivatized with heptafluorobutyric anhydride, and then analyzed by a gas chromatograph equipped with a mass spectrometer. The average recoveries of XLDs from the spiked sampler were 83-101% for personal exposure monitoring. The recovery after 5 days of storage in a refrigerator exceeded 90%. The overall limit of quantitation (LOQ) was 0.600 g/sample. The relative standard deviation, which represents the overall reproducibility defined as precision, was 0.8-10.3%. CONCLUSIONS: The proposed method enables 4-hour personal exposure monitoring of XLDs at concentrations equaling 0.001-2 times the threshold limit value-time-weighted average (TLV-TWA: 0.5 ppm) adopted by the American Conference of Governmental Industrial Hygienists, and is useful for estimating worker exposure to XLDs.

Determination of dimethyl sulfoxide and dimethyl sulfone in urine by gas chromatography-mass spectrometry after preparation using 2,2-dimethoxypropane.

A method for routinely determination of dimethyl sulfoxide (DMSO) and dimethyl sulfone (DMSO(2)) in human urine was developed using gas chromatography-mass spectrometry. The urine sample was treated with 2,2-dimethoxypropane (DMP) and hydrochloric acid for efficient removal of water, which causes degradation of the vacuum level in mass spectrometer and shortens the life-time of the column. Experimental DMP reaction parameters, such as hydrochloric acid concentration, DMP-urine ratio, reaction temperature and reaction time, were optimized for urine. Hexadeuterated DMSO was used as an internal standard. The recoveries of DMSO and DMSO(2) from urine were 97-104 and 98-116%, respectively. The calibration curves showed linearity in the range of 0.15-54.45 mg/L for DMSO and 0.19-50.10 mg/L for DMSO(2). The limits of detection of DMSO and DMSO(2) were 0.04 and 0.06 mg/L, respectively. The relative standard deviations of intra-day and inter-day were 0.2-3.4% for DMSO and 0.4-2.4% for DMSO(2). The proposed method may be useful for the biological monitoring of workers exposed to DMSO in their occupational environment.

Development of miniaturized hollow-fiber assisted liquid-phase microextraction with in situ acyl derivatization followed by GC-MS for the determination of benzophenones in human urine samples.

A simple and highly sensitive method that involves miniaturized hollow fiber assisted liquid-phase microextraction (HF-LPME) with in situ acyl derivatization and GC-MS was developed for the determination of benzophenone (BP) and related compounds in human urine samples. The limits of detection (S/N = 3) and quantification (S/N > 10) of BPs in human urine samples are 0.01 to 0.05 and 0.05 to 0.2 ng ml(-1), respectively. The average recoveries of BPs (n = 5) in human urine samples spiked with 10 and 50 ng ml(-1) BPs are 93.1 to 106.7% (RSD: 1.5 to 8.4%) and 96.3 to 101.5% (RSD: 3.0 to 7.7%), respectively. When the proposed method was applied to human urine samples, BPs were detected at the sub ng ml(-1) level.

Stir bar sorptive extraction with in situ derivatization and thermal desorption-gas chromatography-mass spectrometry for trace analysis of methylmercury and mercury(II) in water sample.

A method for the trace analysis of methylmercury (MeHg) and Hg(II) in water sample was developed, which involved stir bar sorptive extraction (SBSE) with in situ alkylation with sodium tetraethylborate and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). The limits of quantification of MeHg and Hg(II) are 20 and 10 ng L(-1) (Hg), respectively. The method shows good linearity and the correlation coefficients are higher than 0.999. The average recoveries of MeHg and Hg(II) in tap or river water sample are 102.1-104.3% (R.S.D.: 7.0-8.9%) and 105.3-106.2% (R.S.D.: 7.4-8.5%), respectively. This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of MeHg and Hg(II) in tap and river water samples.

Mercury speciation and analysis in drinking water by stir bar sorptive extraction with in situ propyl derivatization and thermal desorption-gas chromatography-mass spectrometry.

A method for mercury analysis and speciation in drinking water was developed, which involved stir bar sorptive extraction (SBSE) with in situ propyl derivatization and thermal desorption (TD)-GC-MS. Ten millilitre of tap water or bottled water was used. After a stir bar, pH adjustment agent and derivatization reagent were added, SBSE was performed. Then, the stir bar was subjected to TD-GC-MS. The detection limits were 0.01 ng mL(-1) (ethylmercury; EtHg), 0.02 ng mL(-1) (methylmercury; MeHg), and 0.2 ng mL(-1) (Hg(II) and diethylmercury (DiEtHg)). The method showed good linearity and correlation coefficients. The average recoveries of mercury species (n=5) in water samples spiked with 0.5, 2.0, and 6.0 ng mL(-1) mercury species were 93.1-131.1% (RSD<11.5%), 90.1-106.4% (RSD<7.8%), and 94.2-109.6% (RSD<8.8%), respectively. The method enables the precise determination of standards and can be applied to the determination of mercury species in water samples.

Hollow-fiber-supported liquid phase microextraction with in situ derivatization and gas chromatography-mass spectrometry for determination of chlorophenols in human urine samples.

A simple and highly sensitive method that involves hollow-fiber-supported liquid phase microextraction (HF-LPME) with in situ derivatization and gas chromatography-mass spectrometry (GC-MS) was developed for the determination of chlorophenols (CPs) such as 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TrCP), 2,3,4,6-tetrachlorophenol (TeCP) and pentachlorophenol (PCP) in human urine samples. Human urine samples were enzymatically de-conjugated with beta-glucuronidase and sulfatase. After de-conjugation, HF-LPME with in situ derivatization was performed. After extraction, 2 microl of extract was carefully withdrawn into a syringe and injected into the GC-MS system. The limits of detection (S/N=3) and quantification (S/N>10) of CPs in the human urine samples are 0.1-0.2 ng ml(-1) and 0.5-1 ng ml(-1), respectively. The calibration curve for CPs is linear with a correlation coefficient of >0.99 in the range of 0.5-500 ng ml(-1) for DCP and TrCP, and of 1-500 ng ml(-1) for TeCP and PCP, respectively. The average recoveries of CPs (n=6) in human urine samples are 81.0-104.0% (R.S.D.: 1.9-6.6%) with correction using added surrogate standards. When the proposed method was applied to human urine samples, CPs were detected at sub-ng ml(-1) level.

Stir-bar-sorptive extraction, with in-situ deconjugation, and thermal desorption with in-tube silylation, followed by gas chromatography-mass spectrometry for measurement of urinary 4-nonylphenol and 4-tert-octylphenol glucuronides.

A novel method, stir-bar-sorptive extraction (SBSE), with in-situ deconjugation and thermal desorption (TD) with in-tube silylation, followed by gas chromatography-mass spectrometry (GC-MS), for determination of trace amounts of 4-nonylphenol glucuronide (NP-G) and 4-tert-octylphenol glucuronide (OP-G) in human urine, is described. The method involved correction by use of stable isotopically labeled internal standards 4-(1-methyl)octylphenol-d5 (NP-d) and deuterium 4-tert-octylphenol (OP-d). A human urine sample to which beta-glucuronidase had been added was extracted for 90 min at 37 degrees C using a stir bar coated with a 500-microm-thick layer of polydimethylsiloxane (PDMS). NP-G and OP-G were deconjugated, becoming free 4-nonylphenol (NP) and 4-tert-octylphenol (OP). The analytes were then extracted with the PDMS stir bar and the stir bar was subjected to TD with in-tube silylation; this was followed by GC-MS in selected-ion-monitoring (SIM) mode. To optimize the conditions for SBSE with in-situ deconjugation and to test recovery, NP-G and OP-G were synthesized by a biochemical technique in our laboratory. Average recoveries from human urine samples spiked with NP-G and OP-G were between 91.9 and 95.6% with correction using the added surrogate standards. Limits of detection were 0.11 ng mL-1 for NP and 0.01 ng mL-1 for OP. We also measured background levels of NP-G and OP-G in six urine samples from healthy volunteers. NP and OP were detected in the samples at concentrations of 0.62-1.95 ng mL-1 and <0.04-0.18 ng mL-1, respectively.

Liquid phase microextraction with in situ derivatization for measurement of bisphenol A in river water sample by gas chromatography-mass spectrometry.

A new method that involves liquid phase microextraction (LPME) with in situ derivatization and gas chromatography-mass spectrometry (GC-MS) is described for the determination of trace amounts of bisphenol A (BPA) in river water samples. The LPME conditions, such as the type of extraction solvent and the extraction time, are investigated. Then, the extract is directly injected into GC-MS. The detection limit and the quantification limit of BPA in river water sample are 2 and 10pgml(-1) (ppt), respectively. The calibration curve for BPA is linear with a correlation coefficient of >0.999 in the range of 10-10,000pgml(-1). The average recoveries of BPA in river water samples spiked with 100 and 1000pgml(-1) BPA are 104.1 (RSD: 8.9%) and 98.3 (RSD: 3.2%), respectively, with correction using the added surrogate standard, bisphenol A-(13)C(12). This simple, accurate, sensitive and selective analytical method may be applicable to the determination of trace amounts of BPA in liquid samples.

Dual derivatization-stir bar sorptive extraction--thermal desorption--gas chromatography-mass spectrometry for determination of 17beta-estradiol in water sample.

A novel method for the trace analysis of 17beta-estradiol (E2) in river water sample was developed, which involved stir bar sorptive extraction (SBSE) with in situ acylation (first derivatization) and thermal desorption (TD) with quartz wool assisted (QWA) in tube silylation (second derivatization), followed by gas chromatography-mass spectrometry (GC-MS), and is called the "dual derivatization method." The optimum conditions for SBSE with in situ acylation, such as the volume of acetic acid anhydride and the extraction time, were investigated. In addition, the optimum conditions for TD with QWA in tube silylation, such as the volume of N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and the TD temperature and hold time, were investigated as well. The detection limit (S/N = 3) and the quantitation limit (S/N>10) of E2 in the river water sample were 0.5 and 2 pg ml(-1) (ppt), respectively, by the dual derivatization method. In addition, the detection limit was 0.1 pg ml(-1) by using dual derivatization method with multi-shot mode. The calibration curve for E2 was linear in the range of 0.002-10 ng ml(-1) with correlation coefficients >0.999. The average recoveries of E2 (n = 6) at the concentrations of 0.05 and 1.0 ng ml(-1) from the river water sample were 93.1 (RSD: 1.4%) and 98.4% (RSD: 0.8%), respectively, with correction using the added surrogate standard, 17beta-estradiol-(13)C(4). This simple, accurate, sensitive and selective analytical method may be applicable to the determination of trace amounts of E2 in water samples.

Stir bar sorptive extraction with in situ de-conjugation and thermal desorption gas chromatography-mass spectrometry for measurement of 4-nonylphenol glucuronide in human urine sample.

4-Nonylphenol glucuronide (NP-G) in human urine samples was analyzed using stir bar sorptive extraction (SBSE) with in situ de-conjugation by beta-glucuronidase and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). Distilled water (1 ml), 1.0 M ammonium acetate solution (100 microl) and beta-glucuronidase (10,000 units ml(-1), 10 microl) were added to human urine sample (1 ml), and extraction was commenced for 90 min at 37 degrees C while stirring at 250 rpm with a stir bar coated with a 500-microm-thick polydimethylsiloxane (PDMS) layer. Then, the stir bar was subjected to TD-GC-MS in the selected ion monitoring (SIM) mode. The calibration curve was made by SBSE method using 4-nonylphenol (NP) as the standard solution. The method showed good linearity and the correlation coefficients were 0.999 over the concentration range of 5-500 nM. Moreover, to optimize the conditions for SBSE with in situ de-conjugation and the recovery test, NP-G was synthesized by a biochemical technique in our laboratory. The limits of detection (S/N = 3) and quantitation (S/N > 10) for NP were 0.2 ng ml(-1) (1.0 nM) and 1.1 ng ml(-1) (5.0 nM), respectively. The average recoveries in the human urine samples (n = 6) spiked with NP-G at levels of 20 and 100 nM were 104.1 (R.S.D. 7.1%) and 100.6% (R.S.D. 9.2%), respectively, with correction using the added internal standard, 4-(1-methyl) octylphenol-d(5). The method enabled the precise determination of the standard and was applicable to the detection of trace amounts of NP-G in human urine samples.

Stir bar sorptive extraction with in situ derivatization and thermal desorption-gas chromatography--mass spectrometry for measurement of phenolic xenoestrogens in human urine samples.

A high-sensitivity analytical method that uses stir bar sorptive extraction (SBSE) with in situ derivatization and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS) for the simultaneous measurement of trace amounts of phenolic xenoestrogens (PXs), such as 2,4-dichlorophenol (DCP), 4-tert-butylphenol (BP), 4-tert-octylphenol (OP), 4-nonylphenol technical isomers (NP), pentachlorophenol (PCP) and bisphenol A (BPA), in human urine samples was developed. The urine sample (1 ml) was de-conjugated by adding beta-glucuronidase and sulfatase. Then, protein precipitation was performed by the addition of acetonitrile. After centrifugation, the supernatant was diluted with purified water and subjected to SBSE with in situ derivatization and TD-GC-MS. The detection limits of DCP, BP, OP, NP, PCP and BPA in the urine samples were 20, 10, 10, 50, 20 and 20 pg ml-1 (ppt), respectively. The calibration curves for PXs were linear and had correlation coefficients higher than 0.99. The average recoveries of those analytes in the urine samples were higher than 95% (RSD: <10%, n=6) with correction using the added surrogate standards. This simple, accurate, sensitive and selective method can be used in the determination of PXs in human urine samples.

Stir bar sorptive extraction and trace analysis of alkylphenols in water samples by thermal desorption with in tube silylation and gas chromatography-mass spectrometry.

A novel method called thermal desorption (TD) with in tube silylation followed by gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of alkylphenols (APs) in river water samples, is described. APs are extracted from river water samples and concentrated by the stir bar sorptive extraction (SBSE) technique. The stir bar coated with polydimethylsiloxane (PDMS) is added to 2.0 ml water sample and stirring is carried out for 60 min at room temperature (25 degrees C) in the vial. Then, the PDMS stir bar is subjected to TD with in tube silylation followed by GC-MS. The detection limit is of the sub pg ml(-1) (ppt) level. The method shows good linearity and the correlation coefficients are higher than 0.99 for all analytes. The average recoveries of APs are higher than 90% (R.S.D.: 3.6-14.8%, n=6). This simple and sensitive analytical method may be used in the determination of trace amounts of APs in river water samples.

Determination of 2-methylisoborneol and geosmin in aqueous samples by static headspace-gas chromatography-mass spectrometry with ramped inlet pressure.

A method for determining the earthy and musty odors 2-methylisoborneol (2-MIB) and geosmin in drinking water using static headspace-GC-MS is described. To achieve lower detection limits, split ratio was optimized with ramped inlet pressure for large headspace sampling volume. The ramped inlet pressure, which held higher pressure (higher column flow rate) only during injection, allowed us to inject 3-mL volume to GC with very low split ratio (2:1). Although sequential analysis with a stainless steel ion source often changed the mass spectrum of 2-MIB, this spectral change was eliminated by using an inert ion source with a 6 mm drawout plate. The detection limits of this method were 0.36 and 0.14 ng/L, respectively, for 2-MIB and geosmin. The repeatabilities (n = 30) were 6.6 and 4.8%, respectively, at 1 ng/L for 2-MIB and geosmin.