Expanding the horizons of porphyrin metal-organic frameworks via catecholate coordination: exploring structural diversity, material stability and redox properties.

Porphyrin based Metal-Organic Frameworks (MOFs) have generated high interest because of their unique combination of light absorption, electron transfer and guest adsorption/desorption properties. In this study, we expand the range of available MOF materials by focusing on the seldom studied porphyrin ligand H10TcatPP, functionalized with tetracatecholate coordinating groups. A systematic evaluation of its reactivity with M(iii) cations (Al, Fe, and In) led to the synthesis and isolation of three novel MOF phases. Through a comprehensive characterization approach involving single crystal and powder synchrotron X-ray diffraction (XRD) in combination with the local information gained from spectroscopic techniques, we elucidated the structural features of the solids, which are all based on different inorganic secondary building units (SBUs). All the synthesized MOFs demonstrate an accessible porosity, with one of them presenting mesopores and the highest reported surface area to date for a porphyrin catecholate MOF (>2000 m2 g-1). Eventually, the redox activity of these solids was investigated in a half-cell vs. Li with the aim of evaluating their potential as electrode positive materials for electrochemical energy storage. One of the solids displayed reversibility during cycling at a rather high potential (∼3.4 V vs. Li+/Li), confirming the interest of redox active phenolate ligands for applications involving electron transfer. Our findings expand the library of porphyrin-based MOFs and highlight the potential of phenolate ligands for advancing the field of MOFs for energy storage materials.

Antibacterial Activity of Two Zn-MOFs Containing a Tricarboxylate Linker.

Metal-organic frameworks (MOFs) can be used as reservoirs of metal ions with relevant antibacterial effects. Here, two novel Zn-based MOFs with the formulas [Zn4(µ4-O)(µ-FA)L2] (GR-MOF-8) and [Zn4(µ4-O)L2(H2O)] (GR-MOF-9) (H3L: 5-((4-carboxyphenyl)ethynyl) in isophthalic acid and FA (formate anion) were solvothermally synthetized and fully characterized. The antibacterial activity of GR-MOF-8 and 9 was investigated against Staphylococcus aureus (SA) and Escherichia Coli (EC) by the agar diffusion method. Both bacteria are among the most relevant human and animal pathogens, causing a wide variety of infections, and are often related with the development of antimicrobial resistances. While both Zn-based materials exhibited antibacterial activity against both strains, GR-MOF-8 showed the highest inhibitory action, likely due to a more progressive Zn release under the tested experimental conditions. This is particularly evidenced in the inhibition of SA, with an increasing effect of GR-MOF-8 with time, which is of great significance to ensure the disappearance of the microorganism.

Ti-based robust MOFs in the combined photocatalytic degradation of emerging organic contaminants.

Photocatalysis process is a promising technology for environmental remediation. In the continuous search of new heterogeneous photocatalysts, metal-organic frameworks (MOFs) have recently emerged as a new type of photoactive materials for water remediation. Particularly, titanium-based MOFs (Ti-MOFs) are considered one of the most appealing subclass of MOFs due to their promising optoelectronic and photocatalytic properties, high chemical stability, and unique structural features. However, considering the limited information of the reported studies, it is a hard task to determine if real-world water treatment is attainable using Ti-MOF photocatalysts. In this paper, via a screening with several Ti-MOFs, we originally selected and described the potential of a Ti-MOF in the photodegradation of a mixture of relevant Emerging Organic Contaminants (EOCs) in real water. Initially, two challenging drugs (i.e., the ß-blocker atenolol (At) and the veterinary antibiotic sulfamethazine (SMT)) and four water stable and photoactive Ti-MOF structures have been rationally selected. From this initial screening, the mesoporous Ti-trimesate MIL-100(Ti) was chosen as the most promising photocatalyst, with higher At or SMT individual photodegradation (100% of At and SMT photodegradation in 2 and 4 h, respectively). Importantly, the safety of the formed by-products from the At and SMT photodegradation was confirmed. Finally, the At and SMT photodegradation capacity of MIL-100(Ti) was confirmed under realistic conditions, by using a mixture of contaminants in tap drinking water (100% of At and SMT photodegradation in 4 h), proven in addition its potential recyclability, which reinforces the potential of MIL-100(Ti) in water remediation.

Coupling phytoremediation of Pb-contaminated soil and biomass energy production: A comparative Life Cycle Assessment.

Phytoremediation is an in-situ remediation technology based on the ability of plants to fix pollutants from the soil. In this sense, plants such as Festuca arundinacea are a promising for heavy metal removal in contaminated soils. The present work studies phytoremediation for Pb removal from a contaminated soil located in Spain using F. arundinacea by applying the Life Cycle Assessment (LCA) approach. Two different options for biomass management were assessed: direct disposal in a security landfill (case 1A) and energy recovery (case 1B). For the latter option, cogeneration was simulated using SuperPro Designer 9.5. In addition, traditional treatments such as soil washing (case 2) and excavation + landfill (case 3) were evaluated in terms of environmental impacts by LCA. The former was simulated using SuperPro Designer 9.5, whereas data from literature were used for the latter to perform the LCA. Results showed that biomass disposal in a landfill was the most important contributor to the overall impact in case 1A. In contrast, biomass conditioning and cogeneration were the main steps responsible for environmental impacts in case 1B. Comparing cases 1A and 1B, the energy recovery from biomass was superior to direct landfill disposal, reducing the environmental impacts in most of the studied categories. Regarding the rest of the treatments, chemical production and soil disposal presented the most critical environmental burdens in cases 2 and 3, respectively. Finally, the comparison between the studied cases revealed that phytoextraction + energy recovery was the most environmentally friendly option for the studied conditions, reducing impacts by 30-100%.

Microencapsulated Isoniazid-Loaded Metal-Organic Frameworks for Pulmonary Administration of Antituberculosis Drugs.

Tuberculosis (TB) is an infectious disease that causes a great number of deaths in the world (1.5 million people per year). This disease is currently treated by administering high doses of various oral anti-TB drugs for prolonged periods (up to 2 years). While this regimen is normally effective when taken as prescribed, many people with TB experience difficulties in complying with their medication schedule. Furthermore, the oral administration of standard anti-TB drugs causes severe side effects and widespread resistances. Recently, we proposed an original platform for pulmonary TB treatment consisting of mannitol microspheres (Ma MS) containing iron (III) trimesate metal-organic framework (MOF) MIL-100 nanoparticles (NPs). In the present work, we loaded this system with the first-line anti-TB drug isoniazid (INH) and evaluated both the viability and safety of the drug vehicle components, as well as the cell internalization of the formulation in alveolar A549 cells. Results show that INH-loaded MOF (INH@MIL-100) NPs were efficiently microencapsulated in Ma MS, which displayed suitable aerodynamic characteristics for pulmonary administration and non-toxicity. MIL-100 and INH@MIL-100 NPs were efficiently internalized by A549 cells, mainly localized in the cytoplasm. In conclusion, the proposed micro-nanosystem is a good candidate for the pulmonary administration of anti-TB drugs.

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation.

A new porous titanium(IV) squarate metal-organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H2 amounts for MOF-based materials under simulated sunlight (up to 672 µmol gcatalyst in 22 h) without any activity loss during at least 10 d.

Ion-Exchanged UPG-1 as Potential Electrolyte for Fuel Cells.

Proton-exchange membrane fuel cells are an attractive green technology for energy production. However, one of their major drawbacks is instability of the electrolytes under working conditions (i.e., temperature and humidity). Some metal-organic frameworks (MOFs) have recently emerged as promising alternative electrolyte materials because of their higher stability (compared with the organic polymers currently used as electrolytes), proton conductivity, and outstanding porosity and versatility. Here, we present ionic exchange in a microporous zirconium phosphonate, UPG-1, as an efficient strategy to enhance its conductivity and cyclability. Thus, labile protons of the hybrid structure were successfully replaced by different alkali cations (Li+, Na+, and K+), leading to 2 orders of magnitude higher proton conductivity than the pristine UPG-1 (up to 2.3 × 10-2 S·cm-1, which is comparable with those of the commercial electrolytes). Further, the proton conductivity was strongly influenced by the MOF hydrophilicity and the polarization strength of the cation, as suggested by molecular simulation. Finally, a mixed-matrix membrane containing the best-performing material (the potassium-exchanged one) was successfully prepared, showing moderate proton conductivity (up to 8.51 × 10-3 S·cm-1).

Proton Conductive Zr-Phosphonate UPG-1-Aminoacid Insertion as Proton Carrier Stabilizer.

Proton exchange membrane fuel cells (PEMFCs) are an attractive green technology for energy generation. The poor stability and performances under working conditions of the current electrolytes are their major drawbacks. Metal-Organic Frameworks (MOFs) have recently emerged as an alternative to overcome these issues. Here, we propose a robust Zr-phosphonate MOF (UPG-1) bearing labile protons able to act a priori as an efficient electrolyte in PEMFCs. Further, in an attempt to further enhance the stability and conductivity of UPG-1, a proton carrier (the amino acid Lysine, Lys) was successfully encapsulated within its porosity. The behaviors of both solids as an electrolyte were investigated by a complete experimental (impedance spectroscopy, water sorption) and computational approach (MonteCarlo, water sorption). Compared with the pristine UPG-1, the newly prepared Lys@UPG-1 composite showed similar proton conductivity but a higher stability, which allows a better cyclability. This improved cyclability is mainly related to the different hydrophobic-hydrophilic balance of the Lys@UPG-1 and UPG-1 and the steric protection of the reactive sites of the MOF by the Lys.

Metal-Organic Framework Microsphere Formulation for Pulmonary Administration.

Although nanoscaled metal-organic frameworks (nanoMOFs) are promising drug carriers, their appropriate formulation remains almost unexplored and basically restricted to intravenous routes. Lungs, beneficiating from a large absorption surface and low enzymatic presence, are a very attractive target for both local and systemic delivery. However, pulmonary nanoMOF formulation is a pending and defying task. Thus, we propose a pioneer nanoMOF-based microsphere system as a potential platform for pulmonary administration. A biocompatible nanoMOF was successfully encapsulated in mannitol by a simple and continuous spray-drying technique. Upon intratracheal administration to rats, the resulting formulation, exhibiting optimal properties (i.e., homogeneity, size, density, and spray-drying process yield), was able to release the intact nanoMOF carrier uniformly along the lungs, reaching the bronchioles and alveoli.

Modulation of metal-azolate frameworks for the tunable release of encapsulated glycosaminoglycans.

Glycosaminoglycans (GAGs) are biomacromolecules necessary for the regulation of different biological functions. In medicine, GAGs are important commercial therapeutics widely used for the treatment of thrombosis, inflammation, osteoarthritis and wound healing. However, protocols for the encapsulation of GAGs in MOFs carriers are not yet available. Here, we successfully encapsulated GAG-based clinical drugs (heparin, hyaluronic acid, chondroitin sulfate, dermatan sulfate) and two new biotherapeutics in preclinical stage (GM-1111 and HepSYL proteoglycan) in three different pH-responsive metal-azolate frameworks (ZIF-8, ZIF-90, and MAF-7). The resultant GAG@MOF biocomposites present significant differences in terms of crystallinity, particle size, and spatial distribution of the cargo, which influences the drug-release kinetics upon applying an acidic stimulus. For a selected system, heparin@MOF, the released therapeutic retained its antithrombotic activity while the MOF shell effectively protects the drug from heparin lyase. By using different MOF shells, the present approach enables the preparation of GAG-based biocomposites with tunable properties such as encapsulation efficiency, protection and release.

A highly conductive nanostructured PEDOT polymer confined into the mesoporous MIL-100(Fe).

Despite the higher efficiency, larger color range and faster stimulus response of polymeric electrochromic materials, their poor cyclability strongly hampers their application in optoelectronics. As an original strategy to stabilize and further nanostructure these polymers, herein an efficient encapsulation and in situ polymerization inside highly porous metal-organic frameworks (MOFs) is reported. In particular, the successful accommodation of poly(3,4-ethylendioxythiophene) (PEDOT) and its partially oxidized polarons inside the mesopores of the nontoxic iron trimesate MIL-100(Fe) is convincingly proved by a large panel of experimental techniques. Remarkably, the polymer-MOF interaction occurring for entrapped PEDOT within the pores (deeply assessed by experimental and simulation methods) might be responsible for the enhanced electrical conductivity of the resulting PEDOT@MIL-100(Fe) composite when compared to the insulating MIL-100(Fe) and the conductive free PEDOT. Furthermore, it was possible to observe the electrochromic properties of the PEDOT@MIL-100(Fe) composite, achieving an improved stability and good cyclability as a consequence of the effective protection by the MOF matrix.

A robust monolithic metal-organic framework with hierarchical porosity.

Hierarchical porous UiO-66-NH2 cm-monolithic xero- and aero-gels with a controlled shape and mechanical robustness were successfully produced from ethanolic gels. Their remarkable controlled hierarchical porosity was effectively assessed using N2 sorption, Hg intrusion porosimetry and focused ion beam-scanning electron microscopy methods.

Nanometric MIL-125-NH2 Metal-Organic Framework as a Potential Nerve Agent Antidote Carrier.

The three-dimensional (3D) microporous titanium aminoterephthalate MIL-125-NH2 (MIL: Material of Institut Lavoisier) was successfully isolated as monodispersed nanoparticles, which are compatible with intravenous administration, by using a simple, safe and low-cost synthetic approach (100 °C/32 h under atmospheric pressure) so that for the first time it could be considered for encapsulation and the release of drugs. The nerve agent antidote 2-[(hydroxyimino)methyl]-1-methyl-pyridinium chloride (2-PAM or pralidoxime) was effectively encapsulated into the pores of MIL-125-NH2 as a result of the interactions between 2-PAM and the pore walls being mediated by π-stacking and hydrogen bonds, as deduced from infrared spectroscopy and Monte Carlo simulation studies. Finally, colloidal solutions of MIL-125-NH2 nanoparticles exhibited remarkable stability in different organic media, aqueous solutions at different pH and under relevant physiological conditions over time (24 h). 2-PAM was rapidly released from the pores of MIL-125-NH2 in vitro.