Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters











Database
Language
Publication year range
1.
Polymers (Basel) ; 16(15)2024 Jul 26.
Article in English | MEDLINE | ID: mdl-39125151

ABSTRACT

In this work, we studied the effect of bismuth oxide particle size and its attenuation capacity as a filler additive in epoxy resins. Six samples were prepared according to the amount of microparticles and nanoparticles in the sample and were coded as ERB-1, ERB-2, ERB-3, ERB-4, ERB-5, and ERB-6. One of the composite epoxies contained Bi2O3 microparticles at a 50:50 ratio (ERB-6) and was chosen as the control composite, and the number of microparticles (MPs) was gradually decreased and replaced by nanoparticles (NPs) to produce epoxy-containing Bi2O3 nanoparticles at a 50:50 ratio (ERB-1). The morphological and thermal characteristics of the studied composites were tested. The attenuation capability of the prepared composites, which is determined by the Bi2O3 particle size, was determined experimentally using a semiconductor detector, an HPGe-detector, and three different gamma-ray point sources (Am-241, Co-60, and Cs-137). The linear attenuation coefficient (LAC) of ERB-3, which contained 30% nanoparticles and 20% microparticles, had the highest value compared to the other composites at all the energies discussed, while the ERB-6 composite had the lowest value at all energies. The radiation-shielding efficiency (RSE) of the prepared samples was determined at all discussed energies; at 662 keV, the radiation-shielding efficiency values were 15.97%, 13.94%, and 12.55% for ERB-3, ERB-1, and ERB-6, respectively. The statistics also proved that the attenuation capacities of the samples containing a combination of nanoparticles and microparticles were much superior to those of the samples containing only microparticles or nanoparticles. A ranking of the samples based on their attenuation capacity is as follows: ERB-3 > ERB-4 > ERB-2 > ERB-1 > ERB-5 > ERB-6.

2.
Materials (Basel) ; 14(21)2021 Oct 28.
Article in English | MEDLINE | ID: mdl-34772013

ABSTRACT

The aim of this study is to investigate the radiation shielding properties of novel concrete samples with bulk Bi2O3 and Bi2O3 nanoparticles (Bi2O3 NP) incorporated into its composition. The mass attenuation coefficient of the concrete samples without Bi2O3 and with 5 and 7 wt% bulk Bi2O3 were experimentally determined and were compared against values obtained using the XCOM and Geant4 simulations. Both methods greatly agree with the experimental values. The linear attenuation coefficients (LAC) of blank concrete (C-0), concrete with 5% bulk Bi2O3 (C-B5), and concrete with 5% nanoparticle Bi2O3 (C-N5) were determined and compared at a wide energy range. We found that the LAC follows the trend of C-0 < C-B5 < C-N5 at all the tested energies. Since both C-B5 and C-N5 have a greater LAC than C-0, these results indicate that the addition of Bi2O3 improves the shielding ability of the concretes. In addition, we investigated the influence of nanoparticle Bi2O3 on the LAC of the concretes. The half-value layer (HVL) for the concretes with bulk Bi2O3 and Bi2O3 nanoparticles is also investigated. At all energies, the C-0 has the greatest HVL, while C-N15 has the least. Thus, C-N15 concrete is the most space efficient, while C-0 is the least space efficient. The radiation protection efficiency (RPE) of the prepared concretes was found to decrease with increasing energy for all five samples. For C-0, the RPE decreased from 63.3% at 0.060 MeV to 13.48% at 1.408 MeV, while for C-N15, the RPE decreased from 87.9 to 15.09% for the same respective energies. Additionally, C-N5 had a greater RPE than C-B5, this result demonstrates that Bi2O3 NP are more efficient at shielding radiation than bulk Bi2O3.

3.
Isotopes Environ Health Stud ; 54(4): 392-402, 2018 Aug.
Article in English | MEDLINE | ID: mdl-29529873

ABSTRACT

Beryllium-7 is a radionuclide produced in the upper atmosphere by cosmic-ray spallation with ions of carbon, oxygen and nitrogen. It is one of radionuclides that can be used to trace the fine particulate matter of 2.5-µm diameter (PM2.5) and smaller. In this work, 7Be was determined in leaves of 10 plant species collected from streets, parks and open land and in 5 consecutive rains over Alexandria, Egypt. 7Be levels were also measured in soil covered by each type of plant as well as in the nearest uncovered soil to be reference values to determine its intercepted amount and consequently PM2.5. The lowest interception, 17.7 %, was by Ficus elastica L., while Ficus retusa L. intercepted about 45 %. Radiologically, the annual effective dose due to the usage of Thymelea hirsute plant leaves as a medicine and Nicotiana glauca Graham for smoking were 0.013 and 0.66 µSv, respectively. The observed levels in rainwater indicated that 7Be decreased consecutively from 3.1 Bq kg-1 in the first rain to 0.71 Bq kg-1 in the last one during the 2016/2017 rain season. The wet deposition of 7Be is less than 1 % of its total deposition on the ground.


Subject(s)
Air Pollutants, Radioactive/analysis , Beryllium/analysis , Particulate Matter/analysis , Plants/chemistry , Radiation Monitoring , Radioisotopes/analysis , Rain/chemistry , Soil/chemistry , Egypt , Seasons
SELECTION OF CITATIONS
SEARCH DETAIL