ABSTRACT
BACKGROUND AND OBJECTIVE: This paper presents the quantitative comparison of three generative models of digital staining, also known as virtual staining, in H&E modality (i.e., Hematoxylin and Eosin) that are applied to 5 types of breast tissue. Moreover, a qualitative evaluation of the results achieved with the best model was carried out. This process is based on images of samples without staining captured by a multispectral microscope with previous dimensional reduction to three channels in the RGB range. METHODS: The models compared are based on conditional GAN (pix2pix) which uses images aligned with/without staining, and two models that do not require image alignment, Cycle GAN (cycleGAN) and contrastive learning-based model (CUT). These models are compared based on the structural similarity and chromatic discrepancy between samples with chemical staining and their corresponding ones with digital staining. The correspondence between images is achieved after the chemical staining images are subjected to digital unstaining by means of a model obtained to guarantee the cyclic consistency of the generative models. RESULTS: The comparison of the three models corroborates the visual evaluation of the results showing the superiority of cycleGAN both for its larger structural similarity with respect to chemical staining (mean value of SSIM â¼ 0.95) and lower chromatic discrepancy (10%). To this end, quantization and calculation of EMD (Earth Mover's Distance) between clusters is used. In addition, quality evaluation through subjective psychophysical tests with three experts was carried out to evaluate quality of the results with the best model (cycleGAN). CONCLUSIONS: The results can be satisfactorily evaluated by metrics that use as reference image a chemically stained sample and the digital staining images of the reference sample with prior digital unstaining. These metrics demonstrate that generative staining models that guarantee cyclic consistency provide the closest results to chemical H&E staining that also is consistent with the result of qualitative evaluation by experts.
Subject(s)
Deep Learning , Microscopy , Staining and Labeling , Benchmarking , Eosine Yellowish-(YS) , Image Processing, Computer-AssistedABSTRACT
This article presents a review after an exhaustive search that yielded 23 works carried out in the last decade for the availability of optical microscopes with open hardware as a low-cost alternative to commercial systems. These works were developed with the aim of covering needs within several areas such as: Bio Sciences research in institutions with limited resources, diagnosis of diseases and health screenings in large populations in developing countries, and training in educational contexts with a need for high availability of equipment and low replacement cost. The analysis of the selected works allows us to classify the analyzed solutions into two main categories, for which their essential characteristics are enumerated: portable field microscopes and multipurpose automated microscopes. Moreover, this work includes a discussion on the degree of maturity of the solutions in terms of the adoption of practices aligned with the development of Open Science. RESEARCH HIGHLIGHTS: Concise review on low-cost microscopes for developing Open Science, exposing the role of smartphone-based microscopy. The work classifies microscopes in two main categories: (1) portable field microscopes, and (2) multipurpose automated microscopes.
Subject(s)
Microscopy , SmartphoneABSTRACT
Breast cancer diagnosis is still done by observation of biopsies under the microscope. The development of automated methods for breast TMA classification would reduce diagnostic time. This paper is a step towards the solution for this problem and shows a complete study of breast TMA classification based on colour models and texture descriptors. The TMA images were divided into four classes: i) benign stromal tissue with cellularity, ii) adipose tissue, iii) benign and benign anomalous structures, and iv) ductal and lobular carcinomas. A relevant set of features was obtained on eight different colour models from first and second order Haralick statistical descriptors obtained from the intensity image, Fourier, Wavelets, Multiresolution Gabor, M-LBP and textons descriptors. Furthermore, four types of classification experiments were performed using six different classifiers: (1) classification per colour model individually, (2) classification by combination of colour models, (3) classification by combination of colour models and descriptors, and (4) classification by combination of colour models and descriptors with a previous feature set reduction. The best result shows an average of 99.05% accuracy and 98.34% positive predictive value. These results have been obtained by means of a bagging tree classifier with combination of six colour models and the use of 1719 non-correlated (correlation threshold of 97%) textural features based on Statistical, M-LBP, Gabor and Spatial textons descriptors.
Subject(s)
Breast Neoplasms/pathology , Carcinoma/pathology , Tissue Array Analysis/standards , Adipose Tissue/pathology , Data Interpretation, Statistical , Female , Humans , Reproducibility of ResultsABSTRACT
Breast cancer is the most common type of cancer and the fifth leading cause of death in women over 40. Therefore, prompt diagnostic and treatment is essential. In this work a TMA Computer Aided Diagnosis (CAD) system has been implemented to provide support to pathologists in their daily work. For that purpose, the tool covers each and every process from the TMA core image acquisition to their individual classification. The first process includes: tissue core location, segmentation and rigid registration of digital microscopic images acquired at different magnifications (5x, 10x, 20x, 20x and 40x) from different devices. The classification process allows performing the core classification selecting different types of color models, texture descriptors and classifiers. Finally, the cores are classified into three categories: malignant, doubtful and benign.
Subject(s)
Algorithms , Breast Neoplasms/pathology , Image Interpretation, Computer-Assisted/methods , Microscopy/methods , Pattern Recognition, Automated/methods , Tissue Array Analysis/methods , Female , Humans , Reproducibility of Results , Sensitivity and Specificity , Spain , Support Vector MachineABSTRACT
Advances in digital pathology are generating huge volumes of whole slide (WSI) and tissue microarray images (TMA) which are providing new insights into the causes of cancer. The challenge is to extract and process effectively all the information in order to characterize all the heterogeneous tissue-derived data. This study aims to identify an optimal set of features that best separates different classes in breast TMA. These classes are: stroma, adipose tissue, benign and benign anomalous structures and ductal and lobular carcinomas. To this end, we propose an exhaustive assessment on the utility of textons and colour for automatic classification of breast TMA. Frequential and spatial texton maps from eight different colour models were extracted and compared. Then, in a novel way, the TMA is characterized by the 1st and 2nd order Haralick statistical descriptors obtained from the texton maps with a total of 241 × 8 features for each original RGB image. Subsequently, a feature selection process is performed to remove redundant information and therefore to reduce the dimensionality of the feature vector. Three methods were evaluated: linear discriminant analysis, correlation and sequential forward search. Finally, an extended bank of classifiers composed of six techniques was compared, but only three of them could significantly improve accuracy rates: Fisher, Bagging Trees and AdaBoost. Our results reveal that the combination of different colour models applied to spatial texton maps provides the most efficient representation of the breast TMA. Specifically, we found that the best colour model combination is Hb, Luv and SCT for all classifiers and the classifier that performs best for all colour model combinations is the AdaBoost. On a database comprising 628 TMA images, classification yields an accuracy of 98.1% and a precision of 96.2% with a total of 316 features on spatial textons maps.
Subject(s)
Breast Neoplasms/classification , Breast Neoplasms/pathology , Colorimetry/methods , Microscopy/methods , Pattern Recognition, Automated/methods , Tissue Array Analysis/methods , Algorithms , Color , Female , Humans , Image Enhancement/methods , Image Interpretation, Computer-Assisted/methods , Machine Learning , Reproducibility of Results , Sensitivity and Specificity , Terminology as TopicABSTRACT
The field of anatomic pathology has experienced major changes over the last decade. Virtual microscopy (VM) systems have allowed experts in pathology and other biomedical areas to work in a safer and more collaborative way. VMs are automated systems capable of digitizing microscopic samples that were traditionally examined one by one. The possibility of having digital copies reduces the risk of damaging original samples, and also makes it easier to distribute copies among other pathologists. This article describes the development of an automated high-resolution whole slide imaging (WSI) system tailored to the needs and problems encountered in digital imaging for pathology, from hardware control to the full digitization of samples. The system has been built with an additional digital monochromatic camera together with the color camera by default and LED transmitted illumination (RGB). Monochrome cameras are the preferred method of acquisition for fluorescence microscopy. The system is able to digitize correctly and form large high resolution microscope images for both brightfield and fluorescence. The quality of the digital images has been quantified using three metrics based on sharpness, contrast and focus. It has been proved on 150 tissue samples of brain autopsies, prostate biopsies and lung cytologies, at five magnifications: 2.5×, 10×, 20×, 40×, and 63×. The article is focused on the hardware set-up and the acquisition software, although results of the implemented image processing techniques included in the software and applied to the different tissue samples are also presented.
Subject(s)
Brain/pathology , Image Processing, Computer-Assisted/methods , Lung/anatomy & histology , Lung/pathology , Microscopy/methods , Prostate/pathology , Automation , Autopsy , Brain/anatomy & histology , Female , Humans , Image Processing, Computer-Assisted/instrumentation , Male , Microscopy/instrumentation , Prostate/anatomy & histology , SoftwareABSTRACT
This paper describes a specific tool for automatically segmenting and archiving of tissue microarray (TMA) cores in microscopy images at different magnifications. TMA enables researchers to extract the small cylinders of a single tissue (core sections) from histological sections and arrange them in an array on a paraffin block such that hundreds can be analyzed simultaneously. A crucial step to improve the speed and quality of this process is the correct localization of each tissue core in the array. However, usually the tissue cores are not aligned in the microarray, the TMA cores are incomplete and the images are noisy and with distorted colors. We develop a robust framework to handle core sections under these conditions. The algorithms are able to detect, stitch, and archive the TMA cores at different magnifications. Once the TMA cores are segmented they are stored in a relational database allowing their processing for further studies of benign-malignant classification. The method was shown to be reliable for handling the TMA cores and therefore enabling further large-scale molecular pathology research.
Subject(s)
Biopsy/methods , Histocytological Preparation Techniques/methods , Image Processing, Computer-Assisted/methods , Microscopy/methods , Algorithms , Databases, Factual , Histocytochemistry , Humans , Neoplasms/chemistry , ROC CurveABSTRACT
Given that angiogenesis and lymphangiogenesis are strongly related to prognosis in neoplastic and other pathologies and that many methods exist that provide different results, we aim to construct a morphometric tool allowing us to measure different aspects of the shape and size of vascular vessels in a complete and accurate way. The developed tool presented is based on vessel closing which is an essential property to properly characterize the size and the shape of vascular and lymphatic vessels. The method is fast and accurate improving existing tools for angiogenesis analysis. The tool also improves the accuracy of vascular density measurements, since the set of endothelial cells forming a vessel is considered as a single object.
Subject(s)
Endothelial Cells , Image Processing, Computer-Assisted , Neoplasms , Neovascularization, Pathologic , Animals , Blood Vessels/metabolism , Blood Vessels/pathology , Endothelial Cells/metabolism , Endothelial Cells/pathology , Humans , Image Processing, Computer-Assisted/instrumentation , Image Processing, Computer-Assisted/methods , Lymphatic Vessels/metabolism , Lymphatic Vessels/pathology , Neoplasms/blood supply , Neoplasms/metabolism , Neoplasms/pathology , Neovascularization, Pathologic/metabolism , Neovascularization, Pathologic/pathologyABSTRACT
Grid technology has enabled clustering and access to, and interaction among, a wide variety of geographically distributed resources such as supercomputers, storage systems, data sources, instruments as well as special devices and services, realizing network-centric operations. Their main applications include large scale computational and data intensive problems in science and engineering. Grids are likely to have a deep impact on health related applications. Moreover, they seem to be suitable for tissue-based diagnosis. They offer a powerful tool to deal with current challenges in many biomedical domains involving complex anatomical and physiological modeling of structures from images or large image databases assembling and analysis. This chapter analyzes the general structures and functions of a Grid environment implemented for tissue-based diagnosis on digital images. Moreover, it presents a Grid middleware implemented by the authors for diagnostic pathology applications. The chapter is a review of the work done as part of the European COST project EUROTELEPATH.
Subject(s)
Image Processing, Computer-Assisted/methods , Information Storage and Retrieval/methods , Telepathology/trends , HumansABSTRACT
An essential and indispensable component of automated microscopy framework is the automatic focusing system, which determines the in-focus position of a given field of view by searching the maximum value of a focusing function over a range of z-axis positions. The focus function and its computation time are crucial to the accuracy and efficiency of the system. Sixteen focusing algorithms were analyzed for histological and histopathological images. In terms of accuracy, results have shown an overall high performance by most of the methods. However, we included in the evaluation study other criteria such as computational cost and focusing curve shape which are crucial for real-time applications and were used to highlight the best practices.
Subject(s)
Histological Techniques/methods , Microscopy/instrumentation , Microscopy/methods , Pathology/instrumentation , Pathology/methods , Algorithms , Brain/pathology , Humans , Image Processing, Computer-Assisted , Light , Lung/pathology , Male , Prostate/pathologyABSTRACT
Grid technology has enabled the clustering and the efficient and secure access to and interaction among a wide variety of geographically distributed resources such as: supercomputers, storage systems, data sources, instruments and special devices and services. Their main applications include large-scale computational and data intensive problems in science and engineering. General grid structures and methodologies for both software and hardware in image analysis for virtual tissue-based diagnosis has been considered in this paper. This methods are focus on the user level middleware. The article describes the distributed programming system developed by the authors for virtual slide analysis in diagnostic pathology. The system supports different image analysis operations commonly done in anatomical pathology and it takes into account secured aspects and specialized infrastructures with high level services designed to meet application requirements. Grids are likely to have a deep impact on health related applications, and therefore they seem to be suitable for tissue-based diagnosis too. The implemented system is a joint application that mixes both Web and Grid Service Architecture around a distributed architecture for image processing. It has shown to be a successful solution to analyze a big and heterogeneous group of histological images under architecture of massively parallel processors using message passing and non-shared memory.