Community-Onset Clostridioides Difficile Infection in Hospitalized Patients in The Netherlands.

BACKGROUND: Clostridioides difficile infection (CDI) is increasingly reported in the community. The aim of this study was to analyze characteristics of hospitalized patients with community-onset CDI (CO-CDI). METHODS: In the Netherlands, 24 hospitals (university-affiliated and general hospitals) participate in the sentinel CDI surveillance program. Clinical characteristics and 30-day outcomes of hospitalized patients >2 years old diagnosed with CDI are registered. Samples of these patients are sent to the national reference laboratory for polymerase chain reaction ribotyping. Data obtained for this surveillance from May 2012 to May 2018 were used to compare CO-CDI with hospital-onset (HO)-CDI episodes. RESULTS: Of 5405 registered cases, 2834 (52.4%) were reported as HO-CDI, 2174 (40.2%) were CO-CDI, and 339 (6.3%) had onset of symptoms in another healthcare facility (eg, nursing home). The proportion of CO-CDI increased over the years and was lower during winter months. Hospitalized patients with CO-CDI were younger (63.8 vs 68.0 years, P < .001) and more often females (53.0% vs 49.6%, P = .02) than patients with HO-CDI. Median time between onset of symptoms and CDI testing was longer in CO-CDI (4 vs 1 day, P < .001). Similar ribotypes were found in CO-CDI and HO-CDI, but ribotype 001 was more frequent among HO-CDI, whereas ribotype 023 was more frequent in CO-CDI. Six of 7 (85.7%) surgeries due to CDI, 27 of 50 (54%) ICU admissions due to CDI, and 48 of 107 (44.9%) of CDI-associated deaths were attributable to CO-CDI. CONCLUSIONS: Our study demonstrates that patients hospitalized with CO-CDI contribute substantially to the total number of CDI episodes and CDI-associated complications in hospitals, stressing the need for awareness and early testing for CDI in community and outpatient settings and also in patients admitted from community with diarrhoea. Surveillance programs that also target nonhospitalized CDI patients are needed to understand the true burden and dynamics of CDI.

Identification and validation of two peptide markers for the recognition of Clostridioides difficile MLST-1 and MLST-11 by MALDI-MS.

OBJECTIVES: Clostridioides difficile infection (CDI) has become the main cause of nosocomial infective diarrhoea. To survey and control the spread of different C. difficile strains, there is a need for suitable rapid tests. The aim of this study was to identify peptide/protein markers for the rapid recognition of C. difficile strains by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). METHODS: We analysed 44 well-characterized strains, belonging to eight different multi-locus sequence types (MLST), using ultrahigh-resolution Fourier transform ion cyclotron resonance (FTICR) MS. The amino acid sequence of two peptide markers specific for MLST-1 and MLST-11 strains was elucidated by MALDI-TOF-MS/MS. The investigation of 2689 C. difficile genomes allowed the determination of the sensitivity and specificity of these markers. C18-solid-phased extraction was used to enrich the MLST-1 marker. RESULTS: Two peptide markers (m/z 4927.81 and m/z 5001.84) were identified and characterized for MLST-1 and MLST-11 strains, respectively. The MLST-1 marker was found in 786 genomes of which three did not belong to MLST-1. The MLST-11 marker was found in 319 genomes, of which 14 did not belong to MLST-11. Importantly, all MLST-1 and MLST-11 genomes were positive for their respective marker. Furthermore, a peptide marker (m/z 5015.86) specific for MLST-15 was found in 59 genomes. We translated our findings into a fast and simple method that allowed the unambiguous identification of the MLST-1 marker on a MALDI-TOF-MS platform. CONCLUSIONS: MALDI-FTICR MS-based peptide profiling resulted in the identification of peptide markers for C. difficile MLST-1 and MLST-11.

Segmental induction heating of orthopaedic metal implants.

OBJECTIVES: Prosthetic joint infection (PJI) is a devastating complication following total joint arthroplasty. Non-contact induction heating of metal implants is a new and emerging treatment for PJI. However, there may be concerns for potential tissue necrosis. It is thought that segmental induction heating can be used to control the thermal dose and to limit collateral thermal injury to the bone and surrounding tissues. The purpose of this study was to determine the thermal dose, for commonly used metal implants in orthopaedic surgery, at various distances from the heating centre (HC). METHODS: Commonly used metal orthopaedic implants (hip stem, intramedullary nail, and locking compression plate (LCP)) were heated segmentally using an induction heater. The thermal dose was expressed in cumulative equivalent minutes at 43°C (CEM43) and measured with a thermal camera at several different distances from the HC. A value of 16 CEM43 was used as the threshold for thermal damage in bone. RESULTS: Despite high thermal doses at the HC (7161 CEM43 to 66 640 CEM43), the thermal dose at various distances from the HC was lower than 16 CEM43 for the hip stem and nail. For the fracture plate without corresponding metal screws, doses higher than 16 CEM43 were measured up to 5 mm from the HC. CONCLUSION: Segmental induction heating concentrates the thermal dose at the targeted metal implant areas and minimizes collateral thermal injury by using the non-heated metal as a heat sink. Implant type and geometry are important factors to consider, as they influence dissipation of heat and associated collateral thermal injury.Cite this article: B. G. Pijls, I. M. J. G. Sanders, E. J. Kuijper, R. G. H. H. Nelissen. Segmental induction heating of orthopaedic metal implants. Bone Joint Res 2018;7:609-619. DOI: 10.1302/2046-3758.711.BJR-2018-0080.R1.

Zoonotic Transfer of Clostridium difficile Harboring Antimicrobial Resistance between Farm Animals and Humans.

The emergence of Clostridium difficile as a significant human diarrheal pathogen is associated with the production of highly transmissible spores and the acquisition of antimicrobial resistance genes (ARGs) and virulence factors. Unlike the hospital-associated C. difficile RT027 lineage, the community-associated C. difficile RT078 lineage is isolated from both humans and farm animals; however, the geographical population structure and transmission networks remain unknown. Here, we applied whole-genome phylogenetic analysis of 248 C. difficile RT078 strains from 22 countries. Our results demonstrate limited geographical clustering for C. difficile RT078 and extensive coclustering of human and animal strains, thereby revealing a highly linked intercontinental transmission network between humans and animals. Comparative whole-genome analysis reveals indistinguishable accessory genomes between human and animal strains and a variety of antimicrobial resistance genes in the pangenome of C. difficile RT078. Thus, bidirectional spread of C. difficile RT078 between farm animals and humans may represent an unappreciated route disseminating antimicrobial resistance genes between humans and animals. These results highlight the importance of the "One Health" concept to monitor infectious disease emergence and the dissemination of antimicrobial resistance genes.

Non-contact electromagnetic induction heating for eradicating bacteria and yeasts on biomaterials and possible relevance to orthopaedic implant infections: In vitro findings.

OBJECTIVES: Infection of implants is a major problem in elective and trauma surgery. Heating is an effective way to reduce the bacterial load in food preparation, and studies on hyperthermia treatment for cancer have shown that it is possible to heat metal objects with pulsed electromagnetic fields selectively (PEMF), also known as induction heating. We therefore set out to answer the following research question: is non-contact induction heating of metallic implants effective in reducing bacterial load in vitro? METHODS: Titanium alloy cylinders (Ti6Al4V) were exposed to PEMF from an induction heater with maximum 2000 watts at 27 kHz after being contaminated with five different types of micro-organisms: Staphylococcus epidermidis; Staphylococcus aureus; Pseudomonas aeruginosa; spore-forming Bacillus cereus; and yeast Candida albicans. The cylinders were exposed to incremental target temperatures (35°C, 45°C, 50°C, 55°C, 60°C, 65°C, 70°C) for up to 3.5 minutes. RESULTS: There was an average linear heating rate of 0.39°C per second up to the target temperature, and thereafter the target temperature was maintained until the end of the experiment. At 60°C and higher (duration 3.5 minutes), there was a 6-log reduction or higher for every micro-organism tested. At 60°C, we found that the shortest duration of effective induction heating was 1.5 minutes. This resulted in a 5-log reduction or higher for every micro-organism tested. CONCLUSION: Non-contact induction heating of a titanium disk is effective in reducing bacterial load in vitro. These promising results can be further explored as a new treatment modality for infections of metal orthopaedic implants.Cite this article: B. G. Pijls, I. M. J. G. Sanders, E. J. Kuijper, R. G. H. H. Nelissen. Non-contact electromagnetic induction heating for eradicating bacteria and yeasts on biomaterials and possible relevance to orthopaedic implant infections: In vitro findings. Bone Joint Res 2017;6:323-330. DOI: 10.1302/2046-3758.65.BJR-2016-0308.R1.

Molecular typing and antimicrobial susceptibility testing to six antimicrobials of Clostridium difficile isolates from three Czech hospitals in Eastern Bohemia in 2011-2012.

In 2011-2012, a survey was performed in three regional hospitals in the Czech Republic to determine the incidence of Clostridium difficile infections (CDIs) and to characterize bacterial isolates. C. difficile isolates were characterized by PCR ribotyping, toxin genes detection, multiple-locus variable-number tandem-repeat analysis (MLVA), and antimicrobial susceptibility testing to fidaxomicin, vancomycin, metronidazole, clindamycin, LFF571, and moxifloxacin using agar dilution method. The incidence of CDI in three studied hospitals was 145, 146, and 24 cases per 100,000 inhabitants in 2011 and 177, 258, and 67 cases per 100,000 inhabitants in 2012. A total of 64 isolates of C. difficile was available for molecular typing and antimicrobial susceptibility testing. 60.9% of the isolates were classified as ribotype 176. All 41 isolates of ribotypes 176 and 078 were positive for the presence of binary toxin genes. Ribotype 176 also carried 18-bp deletion in the regulatory gene tcdC. Tested isolates of C. difficile were fully susceptible to vancomycin and metronidazole, whereas 65.1% of the isolates were resistant to moxifloxacin. MLVA results indicated that isolates from three different hospitals were genetically related, suggesting transmission between healthcare facilities.

Whole genome sequencing reveals potential spread of Clostridium difficile between humans and farm animals in the Netherlands, 2002 to 2011.

Farm animals are a potential reservoir for human Clostridium difficile infection (CDI), particularly PCR ribotype 078 which is frequently found in animals and humans. Here, whole genome single-nucleotide polymorphism (SNP) analysis was used to study the evolutionary relatedness of C. difficile 078 isolated from humans and animals on Dutch pig farms. All sequenced genomes were surveyed for potential antimicrobial resistance determinants and linked to an antimicrobial resistance phenotype. We sequenced the whole genome of 65 C. difficile 078 isolates collected between 2002 and 2011 from pigs (n = 19), asymptomatic farmers (n = 15) and hospitalised patients (n = 31) in the Netherlands. The collection included 12 pairs of human and pig isolates from 2011 collected at 12 different pig farms. A mutation rate of 1.1 SNPs per genome per year was determined for C. difficile 078. Importantly, we demonstrate that farmers and pigs were colonised with identical (no SNP differences) and nearly identical (less than two SNP differences) C. difficile clones. Identical tetracycline and streptomycin resistance determinants were present in human and animal C. difficile 078 isolates. Our observation that farmers and pigs share identical C. difficile strains suggests transmission between these populations, although we cannot exclude the possibility of transmission from a common environmental source.

Acquisition of Clostridium difficile by piglets.

Clostridium difficile is recognized as an important cause of nosocomial diarrhoea in humans especially in association with administration of antibiotics. In pigs, C. difficile can cause neonatal enteritis and can be isolated from faeces from both diseased and healthy animals. The presented prospective study describes how soon C. difficile can be isolated from newborn piglets after normal parturition and how C. difficile spreads within a pig farm. Six sows, their farrowing crates and their litters at one farm were sampled until C. difficile was found in all piglets. Within 48 h after birth, all 71 piglets became positive for C. difficile (two piglets were already positive within 1h post partum), all sows became positive within 113 h after parturition and the farrowing crates were found intermittently positive. C. difficile could also be detected in air samples and in samples of teats of the sows. All isolates belonged to PCR ribotype 078. Twenty-one C. difficile ribotype 078 isolates, found at the farm, were further analyzed by MLVA (multiple-locus variable-number tandem repeat analysis) and belonged to one clonal complex, except one isolate. To be sure that piglets were not born already infected with C. difficile ribotype 078, 38 caesarean derived piglets were sampled immediately after surgery. All piglets tested negative at delivery and stayed negative for C. difficile ribotype 078 during the 21 days in which they were kept in sterile incubators. This study shows that C. difficile ribotype 078 spreads easily between sows, piglets and the environment. Vertical transmission of C. difficile ribotype 078 was not found and is very unlikely to occur.