Speciation and Reactivity of Mono- and Binuclear Ni Intermediates in Aminoquinoline-Directed C-H Arylation and Benzylation.

This paper describes detailed organometallic studies of the aminoquinoline-directed Ni-catalyzed C-H functionalization of 2,3,4,5-tetrafluoro-N-(quinolin-8-yl)benzamide with diaryliodonium reagents. A combination of 19F NMR spectroscopy and X-ray crystallography is used to track and characterize diamagnetic and paramagnetic intermediates throughout this transformation. These provide key insights into both the cyclometalation and oxidative functionalization steps of the catalytic cycle. The reaction conditions (solvent, ligands, base, and stoichiometry) play a central role in the observation of a NiII precyclometalation intermediate as well as in the speciation of the NiII products of C-H activation. Both mono- and binuclear cyclometalated NiII species are observed and interconvert, depending on the reaction conditions. Cyclic voltammetry reveals that the NiII/III redox potentials for the cyclometalated intermediates vary by more than 700 mV depending on their coordination environments, and these differences are reflected in their relative reactivity with diaryliodonium oxidants. The oxidative functionalization reaction affords a mixture of arylated and solvent functionalization organic products, depending on the conditions and solvent. For example, conducting oxidation in toluene leads to the preferential formation of the benzylated product. A series of experiments implicate a NiII/III/IV pathway for this transformation.

Nickel-Based Catalysts for the Selective Monoarylation of Dichloropyridines: Ligand Effects and Mechanistic Insights.

This report describes a detailed study of Ni phosphine catalysts for the Suzuki-Miyaura coupling of dichloropyridines with halogen-containing (hetero)aryl boronic acids. With most phosphine ligands these transformations afford mixtures of mono- and diarylated cross-coupling products as well as competing oligomerization of the boronic acid. However, a ligand screen revealed that PPh2Me and PPh3 afford high yield and selectivity for monoarylation over diarylation as well as minimal competing oligomerization of the boronic acid. Several key observations were made regarding the selectivity of these reactions, including: (1) phosphine ligands that afford high selectivity for monoarylation fall within a narrow range of Tolman cone angles (between 136° and 157°); (2) more electron-rich trialkylphosphines afford predominantly diarylated products, while less-electron rich di- and triarylphosphines favor monoarylation; (3) diarylation proceeds via intramolecular oxidative addition; and (4) the solvent (MeCN) plays a crucial role in achieving high monoarylation selectivity. Experimental and DFT studies suggest that all these data can be explained based on the reactivity of a key intermediate: a Ni0-π complex of the monoarylated product. With larger, more electron-rich trialkylphosphine ligands, this π complex undergoes intramolecular oxidative addition faster than ligand substitution by the MeCN solvent, leading to selective diarylation. In contrast, with relatively small di- and triarylphosphine ligands, associative ligand substitution by MeCN is competitive with oxidative addition, resulting in selective formation of monoarylated products. The generality of this method is demonstrated with a variety of dichloropyridines and chloro-substituted aryl boronic acids. Furthermore, the optimal ligand (PPh2Me) and solvent (MeCN) are leveraged to achieve the Ni-catalyzed monoarylation of a broader set of dichloroarene substrates.

Visible-Light Photocatalytic C-H Amination of Arenes Utilizing Acridine-Lewis Acid Complexes.

This report describes the development of a visible-light photocatalytic system for C(sp2)-H amination that leverages in situ-generated photocatalysts. We demonstrate that the combination of acridine derivatives and Lewis acids forms potent photooxidants that promote the C-H amination of electronically diverse arenes upon irradiation with visible-light (440 nm). A first-generation photocatalyst composed of Sc(OTf)3 and acridine effects the C-H amination of substrates with oxidation potentials ≤ +2.5 V vs SCE with pyrazole, triazole, and pyridine nucleophiles. Furthermore, the simplicity and modularity of this system enable variation of both Lewis acid and acridine to tune reactivity. This enabled the rapid identification of two second-generation photocatalysts (derived from (i) Al(OTf)3 and acridine or (ii) Sc(OTf)3 and a pyridinium-substituted acridine) that catalyze a particularly challenging transformation: C(sp2)-H amination with benzene as the limiting reagent.

Development of High-Throughput Experimentation Approaches for Rapid Radiochemical Exploration.

Positron emission tomography is a widely used imaging platform for studying physiological processes. Despite the proliferation of modern synthetic methodologies for radiolabeling, the optimization of these reactions still primarily relies on inefficient one-factor-at-a-time approaches. High-throughput experimentation (HTE) has proven to be a powerful approach for optimizing reactions in many areas of chemical synthesis. However, to date, HTE has rarely been applied to radiochemistry. This is largely because of the short lifetime of common radioisotopes, which presents major challenges for efficient parallel reaction setup and analysis using standard equipment and workflows. Herein, we demonstrate an effective HTE workflow and apply it to the optimization of copper-mediated radiofluorination of pharmaceutically relevant boronate ester substrates. The workflow utilizes commercial equipment and allows for rapid analysis of reactions for optimizing reactions, exploring chemical space using pharmaceutically relevant aryl boronates for radiofluorinations, and constructing large radiochemistry data sets.

Photo- and Cu-Mediated 11C Cyanation of (Hetero)Aryl Thianthrenium Salts.

We present a photo- and Cu-mediated 11C cyanation of bench-stable (hetero)aryl thianthrenium salts via an aryl radical addition pathway. The thianthrenium substrates can be readily accessed via C-H functionalization, and the radiocyanation protocol proceeds under mild conditions (<50 °C, 5 min) and can be automated using open-source, readily accessible augmentations to existing radiochemistry equipment.

Benchmarking Trisaminocyclopropeniums as Mediators for Anodic Oxidation Reactions.

This report benchmarks a tris(amino)cyclopropenium (TAC) salt as an electron-transfer mediator for anodic oxidation reactions in comparison to two known mediators: a triarylamine and a triarylimidazole derivative. The three mediators have redox potentials, diffusion coefficients, and heterogeneous electron transfer rates similar to those of glassy carbon electrodes in acetonitrile/KPF6. However, they differ significantly in their performance in two electro-organic reactions: anodic fluorination of a dithiane and anodic oxidation of 4-methoxybenzyl alcohol. These differences are rationalized based on variable stability in the presence of reaction components (e.g., NEt3·3HF, lutidine, and Cs2CO3) as well as very different rates of electron transfer with the organic substrate. Overall, this work highlights the advantages and disadvantages of each mediator and provides a foundation for expanding the applications of TACs in electro-organic synthesis moving forward.

Zinc-Mediated Radiosynthesis of Unprotected Fluorine-18 Labelled α-Tertiary Amides.

This report describes the development of a Zn(OTf)2 -mediated method for converting α-tertiary haloamides to the corresponding fluorine-18 labelled α-tertiary fluoroamides with no-carrier-added [18 F]tetramethylammonium fluoride. 1,5,7-Triazabicyclo[4.4.0]dec-5-ene is an essential additive for achieving high radiochemical conversion. Under the optimised conditions, radiofluorination proceeds at sterically hindered tertiary sites in high radiochemical conversions, yields, and purities. This method has been successfully automated and applied to access >200 mCi (>7.4 GBq) of several model radiofluorides. Mechanistic studies led to the development of a new, nucleophilic C-H radiofluorination process using N-sulphonyloxyamide substrates.

Tandem Iridium-Catalyzed C-H Borylation/Copper-Mediated Radiofluorination of Aromatic C-H Bonds with [18F]TBAF.

Direct C-H functionalization of (hetero)aromatic C-H bonds with iridium-catalyzed borylation followed by copper-mediated radiofluorination of the in situ generated organoboronates affords fluorine-18 labeled aromatics in high radiochemical conversions and meta-selectivities. This protocol describes the benchtop reaction assembly of the C-H borylation and radiofluorination steps, which can be utilized for the fluorine-18 labeling of densely functionalized bioactive scaffolds.

Data science enabled discovery of a highly soluble 2,2'-bipyrimidine anolyte for application in a flow battery.

Development of non-aqueous redox flow batteries as a viable energy storage solution relies upon the identification of soluble charge carriers capable of storing large amounts of energy over extended time periods. A combination of metrics including number of electrons stored per molecule, redox potential, stability, and solubility of the charge carrier impact performance. In this context, we recently reported a 2,2'-bipyrimidine charge carrier that stores two electrons per molecule with reduction near -2.0 V vs. Fc/Fc+ and high stability. However, these first-generation derivatives showed a modest solubility of 0.17 M (0.34 M e-). Seeking to improve solubility without sacrificing stability, we harnessed the synthetic modularity of this scaffold to design a library of sixteen candidates. Using computed molecular descriptors and a single node decision tree, we found that minimization of the solvent accessible surface area (SASA) can be used to predict derivatives with enhanced solubility. This parameter was used in combination with a heatmap describing stability to de-risk a virtual screen that ultimately identified a 2,2'-bipyrimidine with significantly increased solubility and good stability metrics in the reduced states. This molecule was paired with a cyclopropenium catholyte in a prototype all-organic redox flow battery, achieving a cell potential up to 3 V.

Deoxyfluorination of Carboxylic Acids via an In Situ Generated Trifluoromethoxide Salt.

An in situ generated pyridinium trifluoromethoxide salt (PyOCF3) is a highly effective deoxyfluorination reagent for the synthesis of acid fluorides. PyOCF3 is formed at room temperature from the reaction of 2,4-dinitro(trifluoromethoxy)benzene with 4-dimethylaminopyridine. PyOCF3 undergoes slow release of fluorophosgene and fluoride, which serve as the electrophile and nucleophile, respectively, for deoxyfluorination. A wide substrate scope and high functional group tolerance are demonstrated. Furthermore, the acid fluorides can be purified by filtration and telescoped to various known reactions.

C-H radiocyanation of bioactive molecules via sequential iodination/copper-mediated cross-coupling.

This report describes a net C-H radiocyanation reaction for the transformation of electron rich (hetero)aromatic substrates into 11CN-labeled products. Electrophilic C(sp2)-H iodination of the (hetero)arene with N-iodosuccinimide is followed by Cu-mediated radiocyanation with K11CN. This sequence is applied to a variety of substrates, including the nucleobases uracil and cytosine, the amino acids tyrosine and tryptophan, and the peptide LYRAGWRAFS, which undergoes selective C-H radiocyanation at the tryptophan (W) residue.

Copper-Mediated Fluoroalkylation of Aryl Bromides and Chlorides Enabled by Directing Groups.

This report describes the reactions between N-heterocyclic carbene copper(I) fluoroalkyl complexes and aryl halides bearing ortho-directing groups. Pyridine, pyrazole, oxazoline, imine, and ester directing groups are shown to dramatically enhance the reactivity of aryl bromides and chlorides with (IPr)CuI-fluoroalkyl complexes (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; fluoroalkyl = difluoromethyl and pentafluoroethyl) to afford aryl-fluoroalkyl coupling products. This approach is leveraged to achieve the Cu-catalyzed directed fluoroalkylation of a series of aryl bromide substrates.

Palladium-Catalyzed Decarbonylative Coupling of (Hetero)Aryl Boronate Esters with Difluorobenzyl Glutarimides.

This report describes the Pd-catalyzed decarbonylative coupling of difluorobenzyl glutarimides with (hetero)aryl boronate esters to yield difluorobenzyl-substituted (hetero)arene products. The use of PAd2Bu as the phosphine ligand in combination with neopentylboronate ester nucleophiles proved critical for the selective formation of the decarbonylative coupling product versus analogous difluorobenzyl ketone. This transformation is effective for electronically diverse (hetero)aryl boronate esters and substituted difluorobenzyl glutarimides.

Indolo[2,3-b]quinoxaline as a Low Reduction Potential and High Stability Anolyte Scaffold for Nonaqueous Redox Flow Batteries.

Redox flow batteries (RFBs) are a promising stationary energy storage technology for leveling power supply from intermittent renewable energy sources with demand. A central objective for the development of practical, scalable RFBs is to identify affordable and high-performance redox-active molecules as storage materials. Herein, we report the design, synthesis, and evaluation of a new organic scaffold, indolo[2,3-b]quinoxaline, for highly stable, low-reduction potential, and high-solubility anolytes for nonaqueous redox flow batteries (NARFBs). The mixture of 2- and 3-(tert-butyl)-6-(2-methoxyethyl)-6H-indolo[2,3-b]quinoxaline exhibits a low reduction potential (-2.01 V vs Fc/Fc+), high solubility (>2.7 M in acetonitrile), and remarkable stability (99.86% capacity retention over 49.5 h (202 cycles) of H-cell cycling). This anolyte was paired with N-(2-(2-methoxyethoxy)-ethyl)phenothiazine (MEEPT) to achieve a 2.3 V all-organic NARFB exhibiting 95.8% capacity retention over 75.1 h (120 cycles) of cycling.

Characterization and Reactivity of Copper(II) and Copper(III) σ-Aryl Intermediates in Aminoquinoline-Directed C-H Functionalization.

Over the past decade, numerous reports have focused on the development and applications of Cu-mediated C-H functionalization reactions; however, to date, little is known about the Cu intermediates involved in these transformations. This paper details the observation and characterization of CuII and CuIII intermediates in aminoquinoline-directed C(sp2)-H functionalization of a fluoroarene substrate. An initial C(sp2)-H activation at CuII occurs at room temperature to afford an isolable anionic cyclometalated CuII complex. This complex undergoes single-electron oxidation with ferrocenium or AgI salts under mild conditions (5 min at room temperature) to afford C(sp2)-C(sp2) or C(sp2)-NO2 coupling products. Spectroscopic studies implicate the formation of a transient diamagnetic CuIII-σ-aryl intermediate that undergoes either (i) a second C(sp2)-H activation at CuIII followed by C-C bond-forming reductive elimination or (ii) reaction with a NO2- nucleophile and C(sp2)-NO2 coupling.

Electroorganic synthesis in aqueous solution via generation of strongly oxidizing and reducing intermediates.

Water is the ideal green solvent for organic electrosynthesis. However, a majority of electroorganic processes require potentials that lie beyond the electrochemical window for water. In general, water oxidation and reduction lead to poor synthetic yields and selectivity or altogether prohibit carrying out a desired reaction. Herein, we report several electroorganic reactions in water using synthetic strategies referred to as reductive oxidation and oxidative reduction. Reductive oxidation involves the homogeneous reduction of peroxydisulfate (S2O82-) via electrogenerated Ru(NH3)62+ at potential of -0.2 V vs. Ag/AgCl (3.5 M KCl) to form the highly oxidizing sulfate radical anion (E0' (SO4˙-/SO42-) = 2.21 V vs. Ag/AgCl), which is capable of oxidizing species beyond the water oxidation potential. Electrochemically generated SO4˙- then efficiently abstracts a hydrogen atom from a variety of organic compounds such as benzyl alcohol and toluene to yield product in water. The reverse analogue of reductive oxidation is oxidative reduction. In this case, the homogeneous oxidation of oxalate (C2O42-) by electrochemically generated Ru(bpy)33+ produces the strongly reducing carbon dioxide radical anion (E0' (CO2˙-/CO2) = -2.1 V vs. Ag/AgCl), which can reduce species at potential beyond the water or proton reduction potential. In preliminary studies, the CO2˙- has been used to homogeneously reduce the C-Br moiety belonging to benzyl bromide at an oxidizing potential in aqueous solution.

A Physical Organic Chemistry Approach to Developing Cyclopropenium-Based Energy Storage Materials for Redox Flow Batteries.

ConspectusRedox flow batteries (RFBs) represent a promising modality for electrical energy storage. In these systems, energy is stored via paired redox reactions of molecules on opposite sides of an electrochemical cell. Thus, a central objective for the field is to design molecules with the optimal combination of properties to serve as energy storage materials in RFBs. The ideal molecules should undergo reversible redox reactions at relatively high potentials (for the molecule that is oxidized during battery charging, called the catholyte) or low potentials (for the species that is reduced during battery charging, called the anolyte). Furthermore, anolytes and catholytes must be highly soluble in the electrolyte solution and stable to extended electrochemical cycling in all battery-relevant redox states. The ideal candidates would undergo more than one reversible electron transfer event. Finally, the optimal structures should be resistant to crossover through a selective separator in order to maintain isolation of the two sides of the cell. This Account describes our design and optimization of organic molecules for this application. We first provide background for the metrics and experiments used to characterize anolytes/catholytes and to progress them toward deployment in flow batteries. We then use our studies of aminocyclopropenium-based catholytes to illustrate this workflow and approach.We identified tris(dimethylamino) cyclopropenium hexafluorophosphate as a first-generation catholyte for nonaqueous RFBs based on literature reports from the 1970s describing its reversible chemical and electrochemical oxidation. Cyclic voltammetry and electrochemical cycling experiments in acetonitrile/LiPF6 confirmed that this molecule undergoes oxidation at relatively high potential (0.86 V versus ferrocene/ferrocenium) and exhibits moderate stability toward charge-discharge cycling. Replacing the methyl groups with isopropyl substituents led to enhanced cycling stability but poor solubility of the radical dication (<0.1 M in acetonitrile). Solubility was optimized using quantitative structure-property relationship modeling, which predicted derivatives with ≥10-fold enhanced solubility. Cyclopropeniums with 300-500 mV higher redox potentials were identified by replacing one of the dialkylamino substituents with a less electron-donating thioalkyl or aryl group. Multielectron catholytes were developed by creating hybrid structures that contain a di(amino) cyclopropenium conjugated with a phenothiazine moeity. Finally, oligomeric tris(amino) cyclopropeniums were designed as crossover resistant catholytes. Optimization of their solubility enabled the deployment of these oligomers in high concentration asymmetric redox flow batteries with energy densities that are comparable to the state-of-the-art commercial aqueous inorganic systems.

Strategies for the Production of [11C]LY2795050 for Clinical Use.

This report describes a comparison of four different routes for the clinical-scale radiosynthesis of the κ-opioid receptor antagonist [11C]LY2795050. Palladium-mediated radiocyanation and radiocarbonylation of an aryl iodide precursor as well as copper-mediated radiocyanation of an aryl iodide and an aryl boronate ester have been investigated. Full automation of all four methods is reported, each of which provides [11C]LY2795050 in sufficient radiochemical yield, molar activity, and radiochemical purity for clinical use. The advantages and disadvantages of each radiosynthesis method are compared and contrasted.

Room-Temperature Copper-Mediated Radiocyanation of Aryldiazonium Salts and Aryl Iodides via Aryl Radical Intermediates.

Radiocyanation is an attractive strategy for incorporating carbon-11 into radiotracer targets, particularly given the broad scope of acyl moieties accessible from nitriles. Most existing methods for aromatic radiocyanation require elevated temperatures (Cu-mediated reactions of aryl halides or organometallics) or involve expensive and toxic palladium complexes (Pd-mediated reactions of aryl halides). The current report discloses a complementary approach that leverages the capture of aryl radical intermediates by a Cu-11CN complex to achieve rapid and mild (5 min, room temperature) radiocyanation. In a first example, aryl radicals are generated via the reaction of a CuI mediator with an aryldiazonium salt (a Sandmeyer-type reaction) followed by radiocyanation with Cu-11CN. In a second example, aryl radicals are formed from aryl iodides via visible-light photocatalysis and then captured by a Cu-11CN species to achieve aryl-11CN coupling. This approach provides access to radiocyanated products that are challenging to access using other methods (e.g., ortho-disubstituted aryl nitriles).