Survival of osseointegrated implants: a 10-year retrospective study.

Introduction: New techniques, surgical protocols, dental implant designs, and prosthetic rehabilitation have been used in dentistry, most of which have yielded good results in the literature. This retrospective survey assessed the clinical results of patients rehabilitated with dental implants between January 2011 and December 2021. Load protocols (immediate and conventional), types of connections of the installed implants, external hexagon (EH), and cone morse (MC) were evaluated. Material and methods: Two evaluators were selected and calibrated to perform the analyses. The inclusion criteria were records with complete and legible information of patients rehabilitated with dental implants who were followed for at least 1 year after rehabilita-tion. The medical records were divided into two groups, G1 (implants with conventional load) and G2 (implants with immediate load), and further subdivided according to implant type. Information about the rehabilitation failures was noted and descriptive statistics of the results were obtained. Results: Among the 432 evaluated medical records of patients rehabilitated with implants, the study included 319 records: 223 from women and 96 from men, aged 20-79 years. In total, data were available on 1,227 implants with dimensions of 10-13 mm and diameters of 3.75-4 mm. The G1 (n=1.188) survival rates were 94.95% for EH implants and 99.5% for MC implants. In G2 (n=39), the survival rates were 93.75% for EH implants and 91.3% for MC implants. The implant survival rates were relatively high among all groups evaluated; however, the discrepancy between the number of implants in the groups may compromise the comparison between them. Understanding and respecting the biomechanical and technical principles of each protocol was the main factor influencing the success of rehabilitation. Conclusion: The results of this study showed that, according to medical records, rehabilitation with dental implants showed excellent results regardless of the connection type (EH or MC) or loading protocol (conventional or immediate). The two loading protocols and two connection types had excellent results and scientific support. Therefore, the choice should be based on the clinical needs of each patient.

Antibiofilm effect of cleaning agents for ocular prostheses.

Introduction: This study aimed to evaluate the antibiofilm effect of different agents (neutral soap, 4% chlorhexidine, Efferdent effervescent tablets, 1% triclosan, and citronella essential oil) used for ocular prosthesis cleaning. Material and Methods: Biofilms of S. aureus and S. epidermidis were formed on 60 ocular prosthesis acrylic resin specimens. The specimens were cleaned with the studied agents with different techniques. Microorganism counting was performed. Data were submitted to ANOVA and HSD Tukey-Kramer (p<.01). Results: When compared to the control group, all cleaning protocols promoted a reduction in growth of microorganisms. The 4% chlorhexidine, effervescent tablets, and 1% triclosan cleaning agents eliminated biofilm in all groups. Conclusion: Therefore, immersion in 4% chlorhexidine, effervescent tablets, and 1% triclosan could be the best protocols indicated for ocular prosthesis cleaning due to their ability to eliminate biofilm.

Influence of Light-Curing Glaze and Chlorhexidine Gluconate in the Acrylic Resin Properties: An in situ Study.

This in-situ study aimed to evaluate the chromatic stability, microhardness, and surfacefree energy of chemically activated acrylic resin (CAAR) samples. Eighty CAAR samples were made and each volunteer (n = 20) received two palatal plates with two sides of groups (without and with glaze application). The samples were exposed to two conditions: the control condition (sucrose 30%) and the test condition (sucrose 30% and 0.12% chlorhexidine). The volunteers used the first palatal device (control condition) for seven days and the second palatal device (test condition) for another seven days, with a seven-day break between them. Then, the ΔΕ00, microhardness, and surface-free energy tests were performed. Analysis of Variance and the Tukey test were used (α = 0.05). The control group with glaze showed higher ΔΕ00 compared to the group without the glaze. The test group with glaze had less ΔΕ00 than their respective controls. In both periods, when the glaze was applied, higher microhardness values were found for all groups. Groups with glaze showed lower roughness and higher surface-free energy than groups without the glaze. The values obtained in this study were satisfactory, showing the clinical efficacy of glaze and the use of 0.12% CH for maintaining the physical and mechanical properties of CAAR.

Aquatic pollutants are associated with reproductive alterations and genotoxicity in estuarine fish (Sciades herzbergii - Bloch, 1794) from the Amazon Equatorial Coast.

Estuaries are constantly subject to continuous environmental impacts of human activities, such as fisheries, port or industry, and domestic sewage, with fish being one of the most affected aquatic animals, reflecting the impacts directly on their bodies. Thus, the aim of this study was to carry out the biomonitoring of an estuary located on the Amazonian Equatorial Coast through analysis of PAHs (Polycyclic Aromatic Hydrocarbons) in the water, in addition to trace metals, histopathological alterations and analysis of erythrocyte micronuclei in Sciades herzbergii. S. herzbergii was used as a model species, due to its estuarine-resident behavior. Gonad and gill samples were subjected to histopathological evaluations. The quantification of trace metals was performed in samples of skeletal muscles of the animals collected, where concentrations of Lead (Pb), Copper (Cu), Zinc (Zn), Cadmium (Cd), Magnesium (Mg), Iron (Fe) and Aluminum (Al) were found. Except for Cadmium (Cd), all the concentrations were above the recommended limits. The PAHs analysis revealed the presence of Naphthalene and Acenaphthene in the water samples Histopathological and genotoxic analyses revealed of lesions in 100% of the study specimens. Thus, the histological and genotoxic alterations found in 100% of S. herzbergii specimens captured in São José Bay-MA are potentially associated with PAH concentrations present in the water. These results are potentially associated with the presence of PAH and trace metals, both in water and in animal tissues, inferring a general scenario of environmental contamination which directly implies a risk to the health and survival of the local biota. This study shows the relevance of continuous biomonitoring of estuarine ecosystems, in order to guide authorities regarding sewage management and ensure the evolutionary development of estuarine species, especially fishes of importance in the local cuisine, therefore related to human food security.

Histological biomarkers and biometric data on trahira Hoplias malabaricus (Pisces, Characiformes, Erythrinidae): a bioindicator species in the Mearim river, Brazilian Amazon.

The objective of this study was to evaluate the levels of environmental contamination in a protected area in the Brazilian Amazon. For this, two areas were chosen along the Mearim River: the reference area (A1) and the potentially contaminated area (A2), where water samples were collected, for physicochemical and microbiological analyses, as well as specimens of Hoplias malabaricus, for the evaluation of biometric data and incidence of branchial lesions. The physicochemical analyzes of the water from both areas showed contamination (low levels of dissolved oxygen, tubidity and high iron concentrations, especially in A2). The microbiological analyzes showed that all water samples showed total coliform values higher than those acceptable by CONAMA and WHO (with higher values in A2), in addition to E. coli values higher than those allowed by legislation in A2. Regarding biometric data, male and female fishes were significantly longer and heavier in A1 during the dry and rain seasons and the gonadosomatic index also showed higher values in A1 than in A2 in both seasons. H. malabaricus showed gill lesions of minimal to moderate pathological importance in A1 and A2, indicating that specimens from both areas of the Mearim River showed biological responses to contamination. The observed changes in the water quality, bimetic parameters and the histological analyzes of the specimens of H. malabaricus directly reflect on the quality and health of the fishes in the Mearim River, and point to the urgent need for prevention and remediation of contamination in these ecosystems.

Matteucinol combined with temozolomide inhibits glioblastoma proliferation, invasion, and progression: an in vitro, in silico, and in vivo study.

Glioblastoma is the most prevalent and malignant brain tumor identified in adults. Surgical resection followed by radiotherapy and chemotherapy, mainly with temozolomide (TMZ), is the chosen treatment for this type of tumor. However, the average survival of patients is around 15 months. Novel approaches to glioblastoma treatment are greatly needed. Here, we aimed to investigate the anti-glioblastoma effect of the combination of matteucinol (Mat) (dihydroxyflavanone derived from Miconia chamissois Naudin) with the chemotherapeutic TMZ in vitro using tumor (U-251MG) and normal astrocyte (NHA) cell lines and in vivo using the chick embryo chorioallantoic membrane (CAM) assay. The combination was cytotoxic and selective for tumor cells (28 µg/mL Mat and 9.71 µg/mL TMZ). Additionally, the combination did not alter cell adhesion but caused morphological changes characteristic of apoptosis in vitro. Notably, the combination was also able to reduce tumor growth in the chick embryo model (CAM assay). The docking results showed that Mat was the best ligand to the cell death membrane receptor TNFR1 and to TNFR1/TMZ complex, suggesting that these two molecules may be working together increasing their potential. In conclusion, Mat-TMZ can be a good candidate for pharmacokinetic studies in view of clinical use for the treatment of glioblastoma.

Success rate of short unitary implants installed in atrophic mandible: Integrative Review.

Introduction: In the rehabilitation of total edentulous patients, lack of bone availability in posterior maxillary regions is common due to pneumatization of the maxillary sinus and posterior mandible due to the presence of the lower alveolar nerve. And to rehabilitate this type of patient, one of them is the use of short implants. Methods: The work aims to evaluate the success rate of treatment of short implants through a literature review. The search was carried out in august 2020 in the Pubmed (MedLine), Scopus and Embase databases, using the keywords: extra short implants, short implants, survival rate, single implant, atrophic mandible. The keywords followed the AND or OR criteria previously elaborated by the PICO question. The inclu-sion criteria were: implants with a length of 4 to 8 mm, which were single and in the posterior region of atrophic mandible and which had 5 years of follow-up. Articles were excluded from the review where the implants were splinted, had a follow-up of less than 5 years and considered short implants larger than 8 mm. Results: After the search, 4 articles were separated, which totaled an n = 172 short implants obtaining a success rate of 93.47% in 5 years. After the search, 4 articles were separated, which totaled an n = 172 short implants obtaining a success rate of 93.47% in 5 years. Conclusion: We can conclude that the use of short implants, even in single prostheses, has a high success rate, which can provide the edentulous patient with little bone bioavailability for rehabilitation.

Matteucinol combined with temozolomide inhibits glioblastoma proliferation, invasion, and progression: an in vitro, in silico, and in vivo study

Glioblastoma is the most prevalent and malignant brain tumor identified in adults. Surgical resection followed by radiotherapy and chemotherapy, mainly with temozolomide (TMZ), is the chosen treatment for this type of tumor. However, the average survival of patients is around 15 months. Novel approaches to glioblastoma treatment are greatly needed. Here, we aimed to investigate the anti-glioblastoma effect of the combination of matteucinol (Mat) (dihydroxyflavanone derived from Miconia chamissois Naudin) with the chemotherapeutic TMZ in vitro using tumor (U-251MG) and normal astrocyte (NHA) cell lines and in vivo using the chick embryo chorioallantoic membrane (CAM) assay. The combination was cytotoxic and selective for tumor cells (28 μg/mL Mat and 9.71 μg/mL TMZ). Additionally, the combination did not alter cell adhesion but caused morphological changes characteristic of apoptosis in vitro. Notably, the combination was also able to reduce tumor growth in the chick embryo model (CAM assay). The docking results showed that Mat was the best ligand to the cell death membrane receptor TNFR1 and to TNFR1/TMZ complex, suggesting that these two molecules may be working together increasing their potential. In conclusion, Mat-TMZ can be a good candidate for pharmacokinetic studies in view of clinical use for the treatment of glioblastoma.

Aggregation of hepatic melanomacrophage centers in S. herzbergii (Pisces, Ariidae) as indicators of environmental change and well-being / [Agregação de centros de melanomacrófagos hepáticos em S. herzbergii (Pisces, Ariidae) como indicadores de mudança ambiental e de bem-estar]

The melanomacrophage centers (MMCs) in the liver of fish are indicators of environmental conditions, as they are involved in xenobiotic biotransformation. The objective of this study was to evaluate the number of MMC in the liver of juveniles and adults of Sciades herzbergii from areas with different levels of contamination. The fish were caught at three points (reference - A1, potentially impacted - A2 and contaminated - A3), in São José bay (Maranhão, Brazil), in four samples. The livers were subjected to the standard histological procedure and 5µm sections were stained with hematoxylin-eosin. In livers of A2 adult individuals (260.50±161.50 MMCs / mm²) they presented a greater number of MMCs when compared to A3 adults (60.00 ± 30.10 MMCs / mm²). Juveniles showed considerable values in A1 (100.00 ± 0.00 MMCs/mm²) and A2 (95.33 ± 33.00 MMCs / mm²) compared to juveniles in A3 (49.00±0.00 MMCs/mm²). These high values are unexpected for young people. The average number of MMC correlated with the rainy season in the region. The use of hepatic MMCs as a biomarker of exposure to pollutants, in particular substances from fisheries systems, such as ammonia and nitrite, proved to be adequate to differentiate areas with different levels of impacts.(AU)

Os centros melanomacrófagos (MMCs) no fígado de peixes são indicadores das condições ambientais, pois estão envolvidos na biotransformação xenobiótica. O objetivo deste estudo foi avaliar o número de MMC no fígado de juvenis e adultos de Sciades herzbergii de áreas com diferentes níveis de contaminação. Os peixes foram capturados em três pontos (referência - A1; potencialmente impactado - A2; e contaminado - A3), na baía de São José (Maranhão, Brasil), em quatro amostras. Os fígados foram submetidos ao procedimento histológico padrão e cortes de 5µm foram corados com hematoxilina-eosina. Em fígados de indivíduos adultos A2 (260,50±161,50 MMCs/mm²), eles apresentaram maior número de MMCs quando comparados aos adultos A3 (60,00±30,10 MMCs/mm²). Os juvenis apresentaram valores elevados em A1 (100,00 ± 0,00 MMCs/mm²) e A2 (95,33±33,00 MMCs/mm²) quando comparados aos juvenis em A3 (49,00±0,00 MMCs/mm²). Esses altos valores são inesperados para os jovens. O número médio de MMC correlacionou-se com a época chuvosa na região. A utilização de MMCs hepáticos como biomarcador de exposição a poluentes, em particular substâncias provenientes de sistemas pesqueiros, como amônia e nitrito, mostrou-se adequada para diferenciar áreas com diferentes níveis de impactos.(AU)

Cross-cultural measurement equivalence of the Healthy Eating Index adapted version for children aged 1-2 years.

The objectives of this study were to evaluate the cross-cultural measurement equivalence of the Healthy Eating Index (HEI) for children aged 1-2 years and to analyse the quality of nutrition of preterm infants. This was a cross-sectional study with 106 premature infants attended in two specialised outpatient clinics of university hospitals. The quality of the diet was analysed through an adapted HEI to meet the dietary recommendations of Brazilian children aged 1-2 years. Food consumption was measured by 24-h recalls. The reliability of the instrument was evaluated by internal consistency analysis and inter-observer reliability using Cronbach's α coefficient and κ with quadratic ponderation. The construct validity was evaluated by principal component analysis and by Spearman's correlation coefficient with total energy and consumption of some groups' food. The diet quality was considered adequate when the total HEI score was over 80 points. Cronbach's α was 0·54. Regarding inter-observer reliability, ten items showed strong agreement (κ > 0·8). The item scores had low correlations with energy consumed (r ≤ 0·30), and positive and moderate correlation of fruit (r 0·67), meat (r 0·60) and variety of diet (r 0·57) with total scores. When analysing the overall quality of the diet, most patients need improvement (median 78·7 points), which can be attributed to low total vegetable intake and the presence of ultraprocessed foods in the diet. The instrument showed auspicious psychometric properties, being promising to evaluate the quality of the diet in children aged 1-2 years.

Genetic parameters for weight, morphometry and oviposition of Africanized honeybee queens using simulated data / [Parâmetros genéticos para peso, morfometria e oviposição de abelhas rainhas africanizadas sob simulação]

This study aimed to estimate genetic parameters for simulated data of body weight (BW), abdominal width (AW), abdominal length (AL), and oviposition. Simulation was performed based on real data collected at apiaries in the region of Campo das Vertentes, Minas Gerais, Brazil. Genetic evaluations were performed using single- and two-trait models and (co)variance components were estimated by the restricted maximum likelihood method. The heritability for BW, AW, AL and oviposition were 0.54, 0.47, 0.31 and 0.66, respectively. Positive genetic correlations of high magnitude were obtained between BW and AW (0.80), BW and oviposition (0.69), AW and oviposition (0.82), and AL and oviposition (0.96). The genetic correlations between BW and AL (0.11) and between AW and AL (0.26) were considered moderate and low. In contrast, the phenotypic correlations were positive and high between BW and AW (0.97), BW and AL (0.96), and AW and AL (0.98). Phenotypic correlations of low magnitude and close to zero were obtained for oviposition with AL (0.02), AW (-0.02), and BW (-0.03). New studies involving these characteristics should be conducted on populations with biological data in order to evaluate the impact of selection on traits of economic interest.(AU)

Objetivou-se estimar parâmetros genéticos para dados simulados de peso corporal (PC), largura abdominal (LA), comprimento abdominal (CA) e oviposição (OV). A simulação foi conduzida com base em dados reais, coletados em apiários da região do Campo das Vertentes, Minas Gerais. As estimativas das análises genéticas foram realizadas por modelos uni e bicaracterísticos, sendo os componentes de (co) variância estimados pelo método da máxima verossimilhança restrita. As herdabilidades para PC, LA, CA e OV foram de 0,54, 0,47, 0,31 e 0,66 respectivamente. As correlações genéticas foram positivas e de alta magnitude para PC e LA (0,80), PC e OV (0,69), LA e OV (0,82) e CA e OV (0,96). Para PC e CA (0,11) e LA e CA (0,26), as correlações genéticas foram moderadas e de baixa magnitude. As correlações fenotípicas foram positivas e de alta magnitude para PC e LA (0,97), PC e CA (0,96) e LA e CA (0,98). Para OV e CA (0,02), OV e LA (-0,02) e OV e PC (-0,03), foram encontradas correlações fenotípicas de magnitude baixa e próximas de zero. Novos estudos devem ser realizados em populações com dados biológicos, a fim de se observar o impacto da seleção em características de interesse econômico.(AU)

Biomarcadores enzimáticos e histológicos em brânquias de Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ucididae) indicativos de impactos ambientais em uma região portuária do nordeste do Brasil / [Enzymatic and histological biomarkers in Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ucididae) gills indicative of environmental impacts in a port region of northeastern Brazil]

Objetivou-se neste estudo analisar biomarcadores histológicos e bioquímicos em brânquias de U. cordatus indicativos de impactos na Baía de São Marcos. Caranguejos foram coletados em quatro áreas na Baía de São Marcos: A1= Ilha dos Caranguejos (com baixo impacto); A2= Coqueiro, A3= Porto Grande, A4= Cajueiro (áreas potencialmente impactadas). Mediram-se os dados biométricos de cada exemplar de caranguejo. Amostras de brânquias foram submetidas à técnica histológica padrão e homogeneizadas em tampão fosfato, e o sobrenadante foi utilizado para análise das enzimas glutationa-S-transferase (GST) e catalase (CAT). A biometria indicou que os caranguejos de A1 são significativamente (P<0,05) maiores e mais pesados do que os caranguejos das áreas A2, A3 e A4. As alterações branquiais (rompimento das células pilastras, deformação do canal marginal, deslocamento da cutícula e necrose) foram significativamente (P˂0,05) mais frequentes em caranguejos de A2, A3 e A4 do que nos caranguejos de A1. As atividades enzimáticas da GST e CAT nos caranguejos apresentaram diferença significativa (P<0,05) entre as áreas de coletas, com padrão similar ao observado para as alterações branquiais. Os biomarcadores analisados mostraram que os caranguejos estão sob diferentes níveis de impactos (A4>A3>A2>A1) ao longo da Baía de São Marcos.(AU)

The objective of this study was to analyze histological and biochemical biomarkers in U. cordatus gills indicative of impacts in São Marcos Bay. Crabs were collected from four areas in São Marcos Bay: A1=Ilha dos Caranguejos (with low impact); A2=Coqueiro, A3=Porto Grande, A4=Cajueiro (potentially impacted areas). The biometric data of each specimen was measured. Gill samples were submitted to standard histological technique and homogenized in phosphate buffer, and the supernatant was used for analysis of glutathione S-transferase (GST) and catalase (CAT) enzyme activity. Biometric data indicated that crabs found in A1 are significantly (P<0.05) larger and heavier than crabs found in A2, A3 and A4 areas. Gill alterations (rupture of pilaster cells, Dilation of the marginal channel, Cuticle Rupture and necrosis) were significantly (P˂0.05) more frequent in the crabs in A2, A3 and A4 than crabs in A1. The enzymatic activities of GST and CAT showed significant difference (P<0.05) between the sampling areas, similar to that observed for gill alterations. The biomarkers analyzed showed that the crabs are under different impact levels (A4> A3> A2> A1) along the São Marcos Bay.(AU)

Effect of the Morphology of Tungsten Oxide Embedded in Sodium Alginate/Polyvinylpyrrolidone Composite Beads on the Photocatalytic Degradation of Methylene Blue Dye Solution.

Tungsten oxide nanostructures were modified by oxygen vacancies through hydrothermal treatment. Both the crystalline structure and morphological appearance were completely changed. Spherical WO3·H2O was prepared from tungstic acid solution by aging at room temperature, while rod-like WO3·0.33H2O was prepared by hydrothermal treatment of tungstic acid solution at 120 °C. These structures embedded in sodium alginate (SA)/polyvinylpyrrolidone (PVP) were synthesized as novel porous beads by gelation method into calcium chloride solution. The performance of the prepared materials as photocatalysts is examined for methylene blue (MB) degradation in aqueous solutions. Different operation parameters affecting the dye degradation process, such as light intensity, illumination time, and photocatalyst dosage are investigated. Results revealed that the photocatalytic activity of novel nanocomposite changed with the change in WO3 morphology. Namely, the beads with rod nanostructure of WO3 have shown better effectiveness in MB removal than the beads containing WO3 in spherical form. The maximum degradation efficiency was found to be 98% for WO3 nanorods structure embedded beads, while the maximum removal of WO3 nanospheres structure embedded beads was 91%. The cycling-ability and reuse results recommend both prepared structures to be used as effective tools for treating MB dye-contaminated wastewaters. The results show that the novel SA/PVP/WO3 nanocomposite beads are eco-friendly nanocomposite materials that can be applied as photocatalysts for the degradation of cationic dyes in contaminated water.

Feasibility of energy adaptive angular meshing for perpendicular and parallel magnetic fields in a grid based Boltzmann solver.

PURPOSE: To develop the enabling algorithmic techniques which allow forward-peaked adaptive angular meshing to be compatible with angular advection of magnetic fields within a deterministic Grid Based Boltzmann Solver (GBBS) for MRI-guided radiotherapy, and establish appropriate energy adaptive meshing schemes which minimize total numerical degrees of freedom while preserving high dosimetric accuracy for parallel and perpendicular magnetic fields. METHODS: A framework to independently adapt angular mesh resolution and basis function refinement of forward and backscattering hemispheres is developed, uniquely accommodating angular advection introduced by magnetic fields. Upwind stabilization techniques to accurately transfer fluence between hemispheres having different discretization are established. To facilitate oblique beam and magnetic field orientations, cardinal forward-peaked mesh orientations were devised to balance requirements for acyclic space-angle sweep ordering, while ensuring the beam predominantly overlaps the forward hemisphere. Energy-dependent fluence anisotropy is investigated, leading to adaptive angular meshing schemes for parallel and perpendicular magnetic fields. Calculated dose distributions were validated against GEANT4 Monte Carlo calculations on slab geometry and anthropomorphic phantoms. RESULTS: Forward-peaked and isotropic energy adaptive angular meshing schemes were developed for parallel and perpendicular magnetic fields respectively, which reduce the number of elements solved by 52.8% and 47.7% respectively compared to static discretization using 32 quadratic elements while retaining over 97% of points passing the gamma 1%/1 mm criterion against Monte Carlo. CONCLUSIONS: Techniques to preserve angular upwind-stabilization between hemispheres of a forward-peaked mesh and establish an acyclic directed space-angle sweep graph enabled energy-adaptive meshing schemes to be developed while accurately solving for magnetic fields. This substantially reduced the numerical degrees of freedom while retaining excellent dosimetric agreement with Monte Carlo. These algorithmic underpinnings contribute towards a fast deterministic GBBS for MRI-guided radiotherapy.

Comparison between flapless and open-flap implant placement: a systematic review and meta-analysis.

No consensus has been reached regarding the influence of the flapless and open-flap surgical techniques on the placement of dental implants. This systematic review compared the effects of flapless implant placement and implant placement with elevation of the mucoperiosteal flap in terms of marginal bone loss, implant survival rate and complications rates. This review followed PRISMA guidelines and was registered in PROSPERO with the registration number CRD42017071475. Two independent reviewers performed a comprehensive search of the PubMed/MEDLINE, Scopus, and Cochrane Library databases for studies published until December 2017. The search identified 559 references. After a detailed review, 24 studies were assessed for eligibility. A total of 1025 patients who had received a total of 1873 dental implants were included. There were no significant differences between the flapless and open-flap surgical techniques in terms of implant survival rates (P=0.34; risk ratio (RR): 1.36; confidence interval (CI): 0.72-2.56), marginal bone loss (P=0.23; MD: -0.20; CI: -0.52-0.13), or complication rates (P=0.67; RR: 1.10; CI: 0.70-1.73). The current meta-analysis showed that the implant survival rate, marginal bone levels, and complications of flapless surgery were similar to those of open-flap surgery over a mean follow-up period of 21.62 months.

A novel transport sweep architecture for efficient deterministic patient dose calculations in MRI-guided radiotherapy.

Accurate and efficient patient dose calculations are essential for treatment planning in magnetic resonance imaging guided radiotherapy (MRIgRT). Achieving reasonable performance for a space-angle discontinuous finite element method (DFEM) grid based Boltzmann solver (GBBS) with magnetic fields for clinical MRIgRT applications largely depends on how the transport sweep is orchestrated. Compared to classical Discrete Ordinates, DFEM in angle introduces increased angular degrees of freedom and eliminates ray-effect artifacts. However, the inclusion of magnetic fields introduces additional serial dependencies such that parallelization of the space-angle transport sweeps becomes more challenging. Novel techniques for the transport sweep and right-hand source assembly are developed, predicated on limiting the number of bulk material densities modeled in the transport sweep scatter calculations. Specifically, k-means clustering is used to assign sub-intervals of mass-density for each spatial element to execute the scatter-dose calculations using batched multiplication by pre-inverted transport sweep matrices. This is shown to be two orders of magnitude more efficient than solving each elemental system individually at runtime. Even with discrete material densities used in the transport sweep scatter calculations, accuracy is maintained by optimizing the material density assignments using k-means clustering, and by performing the primary photon fluence calculations (ray-tracing) using the underlying continuous density of the computed tomography (CT) image. In the presence of 0.5 T parallel and 1.5 T perpendicular magnetic fields, this approach demonstrates high levels of accuracy with gamma 1%/1 mm passing rates exceeding 94% across a range of anatomical sites compared to GEANT4 Monte Carlo dose calculations which used continuous densities. This deterministic GBBS approach maintains unconditional stability, produces no ray-effect artifacts, and has the benefit of no statistical uncertainty. Runtime on a non-parallelized Matlab implementation averaged 10 min per beam averaging 80 000 spatial elements, paving way for future development based on this algorithmically efficient paradigm.

Proton beam behavior in a parallel configured MRI-proton therapy hybrid: Effects of time-varying gradient magnetic fields.

PURPOSE: Real-time magnetic resonance (MR) guidance is of interest to various groups globally because the superior soft tissue contrast MR images offer over other x-ray-based imaging modalities. Because of the precision required in proton therapy, proton therapy treatments rely heavily on image guidance. Integrating a magnetic resonance imaging (MRI) into a proton therapy treatment is a challenge. The charged particles (protons) used in proton therapy experience magnetic forces when travelling through the MRI magnetic fields. Given that it is desired that proton beams can be delivered with submillimeter accuracy, it is important that all potential sources of beam displacement are well modeled and understood. This study investigated the behavior of monoenergetic proton beams in the presence of a simulated set of realistic three-dimensional (3D) vector magnetic gradient fields required for spatial localization during imaging. This deflecting source has not been previously investigated. METHODS: Three-dimensional magnetic vector fields from a superconducting 0.5 T open bore MRI magnet model (previously developed in-house) and 3D magnetic fields from an in-house gradient coil model were applied to two types of computer simulations. In all simulations, monoenergetic proton pencil beams (from 80 to 250 MeV) were used. The initial directions of proton beams were varied. In all simulations, the orientation of the B0 field coincided with the positive z-axis in the simulation geometry. The first type of simulation is based on an analytic magnetic force equation (analytic simulations) while the second type is a full Monte Carlo (MC) simulation. The analytic simulations were limited to propagating the proton beams in vacuum but could be rapidly calculated in a desktop computer while the MC simulations were calculated in a cluster computer. The proton beam locations and dose profiles at the central plane (z = 0 cm) with or without magnetic fields were extracted and used to quantify the effect of the presence of the different magnetic fields on the proton beam. RESULTS: The analytic simulations agree with MC results within 0.025 mm, thus acting as the verification of MC calculations. The presence of the B0 field caused the beam to follow a helical trajectory which resulted in angular offsets of 4.9o , 3.6o , and 2.8o for the 80, 150, and 250 MeV, respectively. Magnetic field deflections caused by a rapid MRI sequence (bSSFP, with maximum gradient strength of 40 mT/m) show a pattern of distortion which remained spatially invariant in the MR's field of view. For the 80 MeV beam, this pattern shows a maximum ranged in the y direction of 1.5 mm. The presence of the B0 field during the bSSFP simulations adds the same beam rotation to the observed during the B0 only simulations. CONCLUSION: This investigation reveals that time-varying gradient magnetic fields required for image generation can cause a small spread in the proton beams used in the study which are independent of the effects arising from the B0 field. Further, studies where clinical beam kernels were convolved with this spread show that these magnetic fields are expected to have an insignificant impact on the beam's entrance dose.

Effect of photopolymerized glaze application on bacterial adhesion on ocular acrylic resin surfaces submitted to accelerated ageing.

Conditions of the acrylic resin (AR) surface, such as roughness, can promote a favourable environment for the adhesion of micro-organisms, even on the surface of ocular prostheses. This study evaluated the influence of photopolymerized glaze application on the roughness of ARs and adhesion of Staphylococcus aureus and Staphylococcus epidermidis on ocular AR surfaces submitted to accelerated ageing. Two hundred and eighty-eight samples of white colour (N1) and colourless ARs were distributed in eight groups (n = 9), based on surface treatments (glaze or ARs submitted to only a final polishing), accelerated ageing (before and after) and periods of microbial growth (24- and 48-h). The roughness average (Ra) and total height of roughness profile (Rt) values were greater for the groups with glaze and increased for all groups after ageing. The microbial adhesion among the groups with and without glaze did not present a statistically significant difference. The ageing did not statistically affect the adhesion of Staph. epidermidis, but affected the adhesion of Staph. aureus, which presented an increase after 24 h of growth on only N1 AR with glaze. These results demonstrate that the glaze did not contribute to adhesion of Staph. aureus and Staph. epidermidis, which are responsible for most ocular prosthetic infections. SIGNIFICANCE AND IMPACT OF THE STUDY: Some recent evidence suggested that the surface finish of ocular prostheses influences the accumulation of deposits that can affect the interaction with pathogenic bacteria, increasing the probability of infections. In addition, surface deterioration over time can increase the roughness and, consequently, biofilm formation. Thus, a better understanding of the influence of surface finish on bacterial adhesion becomes extremely important. In this study, we tested a glaze for surface polishing compared to mechanical polishing, before and after ageing. The results suggest that the glaze did not contribute to microbial adhesion and might be useful in preventing possible prosthetic infections.

On the stability in alkaline conditions and electrochemical performance of A2BO4-type cathodes for liquid fuel cells.

Typical direct liquid fuel cells (DLFCs) use a liquid fuel and O2 as the oxidant. However, for applications where O2 is not available (e.g., space and underwater), the gas has been replaced by H2O2 as a liquid oxidant. This work presents a study of various ceramic disc electrodes with K2NiO4 structure and nominal compositions La2NiO4, La2CuO4, La1.9Pr0.1CuO4, La1.9Sr0.1CuO4, La1.8Ce0.2NiO4, La1.9Pr0.1NiO4, La1.8Pr0.2NiO4 and La1.9Sr0.1NiO4 to assess their stability and activity for the hydrogen peroxide reduction reaction (HPRR) in alkaline media. Stability tests conducted in 2 M NaOH show that Ni and Cu are readily dissolved, as occurs for substituting elements such as Sr, in agreement with calculated Pourbaix diagrams. Such degradation affects the surface of the materials, which is depleted of transition metals. This has consequences for the ORR and HPRR activity due to formation of a La-rich passivation layer on the surface. Only La2CuO4 and La1.8Ce0.2NiO4 display HPRR activity at around -0.25 V vs. RHE. An attempt is made to correlate the composition, chemical stability and electrochemical behaviour of these materials based on known molecular-orbital models proposed for the oxygen reduction reaction.