ABSTRACT
The present study investigated the effect of different polymers and manufacturing methods (hot melt extrusion, HME, and spray drying, SD) on the solid state, stability and pharmaceutical performance of amorphous solid dispersions. In the present manuscript, a combination of different binary amorphous solid dispersions containing 20% and 30% of drug loadings were prepared using SD and HME. The developed solid-state properties of the dispersions were evaluated using small- and wide-angle X-ray scattering (WAXS) and modulated differential scanning calorimetry (mDSC). The molecular interaction between the active pharmaceutical ingredients (APIs) and polymers were investigated via infrared (IR) and Raman spectroscopy. The in vitro release profile of the solid dispersions was also evaluated to compare the rate and extend of drug dissolution as a function of method of preparation. Thereafter, the effect of accelerated stability conditions on the physicochemical properties of the solid dispersions were also evaluated. The results demonstrated higher stability of Soluplus® (SOL) polymer-based solid dispersions as compared to hydroxypropyl methylcellulose (HPMC)-based solid dispersions. Moreover, the stability of the solid dispersions was found to be higher in the case of API having high glass transition temperature (Tg) and demonstrated higher interaction with the polymeric groups. Interestingly, the stability of the melt-extruded dispersions was found to be slightly higher as compared to the SD formulations. However, the down-processing of melt-extruded strands plays critical role in inducing the API crystal nuclei formation. In summary, the findings strongly indicate that the particulate properties significantly influence the performance of the product.
ABSTRACT
There is a growing focus on solid-state degradation, especially for its relevance in understanding interactions with excipients. Performing a solid-state degradation of Venetoclax (VEN), we delve into VEN's stability in different solid-state oxidative stress conditions, utilizing Peroxydone™ complex and urea peroxide (UHP). The investigation extends beyond traditional forced degradation scenarios, providing insights into VEN's behavior over 32 h, considering temperature and crystallinity conditions. Distinct behaviors emerge in the cases of Peroxydone™ complex and UHP. The partially crystalline (PC-VEN) form proves more stable with Peroxydone™, while the amorphous form (A-VEN) shows enhanced stability with UHP. N-oxide VEN, a significant degradation product, varies between these cases, reflecting the impact of different oxidative stress conditions. Peroxydone™ complex demonstrates higher reproducibility and stability, making it a promising option for screening impurities in solid-state oxidative stress scenarios. This research not only contributes to the understanding of VEN's stability in solid-state but also aids formulators in anticipating excipient incompatibilities owing to presence of reactive impurities (peroxides) and oxidation in the final dosage form.
Subject(s)
Bridged Bicyclo Compounds, Heterocyclic , Crystallization , Drug Stability , Excipients , Oxidation-Reduction , Sulfonamides , Bridged Bicyclo Compounds, Heterocyclic/chemistry , Crystallization/methods , Sulfonamides/chemistry , Excipients/chemistry , Oxidative Stress , Chemistry, Pharmaceutical/methods , TemperatureABSTRACT
Ball-milling and harsh manufacturing processes often generate crystal disorder which have practical implications on the physical and chemical stabilities of solid drugs during subsequent storage, transport, and handling. The impact of the physical state of solid drugs, containing different degrees/levels of crystal disorder, on their autoxidative stability under storage has not been widely investigated. This study investigates the impact of differing degrees of crystal disorder on the autoxidation of Mifepristone (MFP) to develop a predictive (semi-empirical) stability model. Crystalline MFP was subjected to different durations of ambient ball milling, and the resulting disorder/ amorphous content was quantified using a partial least square (PLS) regression model based on Raman spectroscopy data. Samples of MFP milled to generate varying levels of disorder were subjected to a range of (accelerated) stability conditions, and periodically sampled to examine their recrystallization and degradation extents. Crystallinity was monitored by Raman spectroscopy, and the degradation was evaluated by liquid chromatography. The analyses of milled samples demonstrated a competition between recrystallization and degradation via autoxidation of MFP, to different extents depending on stability conditions/exposure time. The degradation kinetics were analyzed by accounting for the preceding amorphous content, and fitted with a diffusion model. An extended Arrhenius equation was used to predict the degradation of stored samples under long-term (25°C/60% RH) and accelerated (40°C/75% RH, 50°C/75% RH) stability conditions. This study highlights the utility of such a predictive stability model for identifying the autoxidative instability in non-crystalline/partially crystalline MFP, owing to the degradation of the amorphous phases. This study is particularly useful for identifying drug-product instability by leveraging the concept of material sciences.
Subject(s)
Materials Science , Mifepristone , Crystallization , Drug Stability , Calorimetry, Differential ScanningABSTRACT
Oxidative degradation of drugs is one of the major routes of drug substance and drug product instability. Among the diverse routes of oxidation, autoxidation is considered to be challenging to predict and control, potentially due to the multi-step mechanism involving free radicals. C-H bond dissociation energy (C-H BDE) is evidenced to be a calculated descriptor shown to predict drug autoxidation. While computational predictions for the autoxidation propensity of drugs are both swift and possible, no literature to date has highlighted the relationship between the computed C-H BDE and the experimentally-derived autoxidation propensities of solid drugs. The objective of this study is to investigate this missing relationship. The present work is an extension to the previously reported novel autoxidation approach that involves subjecting a physical mixture of pre-milled polyvinyl pyrrolidone (PVP) K-60 and a crystalline drug under high temperature and pressurized oxygen setup. The drug degradation was measured using chromatographic methods. An improved trend between the extent of solid autoxidation and C-H BDE could be observed after normalizing the effective surface area of drugs in the crystalline state, pointing to a positive relationship. Additional studies were conducted by dissolving the drug in N-methyl pyrrolidone (NMP) and exposing the solution under a pressurized oxygen setup at diverse elevated temperatures. Chromatographic results of these samples indicated a similarity in the formed degradation products to the solid-state experiments pointing to the utility of NMP, a PVP monomer surrogate, as a stressing agent for faster and relevant autoxidation screening of drugs in formulations.
ABSTRACT
The C-H bond dissociation energy (BDE) of drug molecules is often used to estimate their relative propensities to undergo autoxidation. BDE calculations based on electronic structures provide a convenient means to estimate the risk for a given compound to degrade via autoxidation. This study aimed to verify the utility of calculated C-H BDEs of a range of drug molecules in predicting their autoxidation propensities, in the solution state. For the autoxidation study, 2,2'-azobis (2-methylpropionitrile) was employed as the solution state stressor, and the experimental reaction rate constants were determined employing ultraperformance liquid chromatographic (UPLC) methods. Reaction rates in the solution state were compared to the calculated C-H BDE values of the respective compounds. The results indicated a poor correlation for compounds in the solution state, and their relative stabilities could not be explained with C-H BDE. On the other hand, a favorable relationship was observed between the relative extent of ionization and the autoxidation rates of the selected compounds. In the solution state, factors such as the type and extent of drug ionization, degree and type of solvation have been shown to contribute to differences in reactivity. By applying the computational method involving the effect of H-atom abstraction and potential ionization sites in the molecule, the calculated C-H BDE should relate better to the experimental autoxidation rates.
Subject(s)
Pharmaceutical Preparations , Thermodynamics , Pharmaceutical Preparations/chemistryABSTRACT
Mechanoactivation has attracted considerable attention in the pharmaceutical sciences due to its ability to generate amorphous materials and solid-state synthetic products without the use of solvent. Although some studies have reported drug degradation during milling, no studies have systematically investigated the use of mechanoactivation in predicting drug degradation in the solid state. Thus, this work explores the autoxidation of drugs in the solid state by comilling amorphous mifepristone (MFP):polyvinylpyrrolidone vinyl acetate (PVPVA) and amorphous olanzapine (OLA):PVPVA. MFP was amorphized by ball milling and OLA by quench cooling techniques. Subsequently, comilling the amorphous drugs in the presence of a 10-fold weight ratio of PVPVA (the excipient containing reactive free radicals) was performed at several milling frequencies to identify the kinetics of mechano-autoxidation over milling durations. Overall, milling led to the degradation of up to 5% drug in the solid state. The autoxidation mechanism was confirmed by performing a stress study in the solution at 50 °C for 5 h, by using a 10 mM azo-bis(isobutyronitrile) (AIBN) as a stressing agent. By deconvoluting the effect of milling frequency and the energy on the extent and kinetics of milling-induced autoxidation of amorphous drugs, it was possible to fit an extended Arrhenius model that allowed extrapolation of mechanoactivated degradation rates (Km) to zero milling frequencies. Further, the autoxidation rates of drugs stored at high temperatures were observed to follow an Arrhenius behavior. A good degree of agreement was observed between the model predictions obtained by mechanoactivation (Km) to the reaction rates observed under accelerated temperatures. Additionally, the impact of adding an antioxidant (e.g., butylated hydroxytoluene) to the mixture during comilling was also examined. This study can be helpful in evaluating the stability of amorphous solids stored in accelerated (non-hermetic) conditions, in screening solid-state autoxidation propensity of drugs, and for the rational selection of antioxidants.
Subject(s)
Povidone , Crystallization , Phase Transition , Temperature , Drug StabilityABSTRACT
The present study deals with the development of dexamethasone (DM)-loaded implants using ester end-capped Resomer RG 502 poly(lactic acid-co-glycolic acid) (PLGA) (502), acid end-capped Resomer RG 502H PLGA (502H), and a 502H:502 mixture (3:1) via hot melt extrusion (HME). The prepared intravitreal implants (20 and 40% DM loaded in each PLGA) were thoroughly investigated to determine the effect of different end-capped PLGA and drug loading on the long-term release profile of DM. The implants were characterized for solid-state active pharmaceutical ingredient (APIs) using DSC and SWAXS, water uptake during stability study, the crystal size of API in the implant matrix using hot-stage polarized light microscopy, and in vitro release profile. The kinetics of PLGA release was thoroughly investigated using quantitative 1H NMR spectroscopy. The polymorph of DM crystal was found to remain unchanged after the extrusion and stability study. However, around 3 times reduction in API particle size was observed after the HME process. The morphology and content uniformity of the RT-stored samples were found to be comparable to the initial implant samples. Interestingly, the samples (mainly 502H) stored at 40 °C and 75% RH for 30 d demonstrated marked deformation and a change in content uniformity. The rate of DM release was higher in the case of 502H samples with a higher drug loading (40% w/w). Furthermore, a simple digital in vitro DM release profile derived for the formulation containing a 3:1 ratio of 502H and 502 was comparable with the experimental release profile of the respective polymer mixture formulation. The temporal development of pores and/or voids in the course of drug dissolution, evaluated using µCT, was found to be a precursor for the PLGA release. Overall, the release profile of DM was found to be dependent on the PLGA type (independent of subtle changes in the formulation mass and diameter). However, the extent of release was found to be dependent on DM loading. Thus, the present investigation led to a thorough understanding of the physicochemical properties of different end-capped PLGAs and the underlying formulation microstructure on the release profile of a crystalline water-insoluble drug, DM, from the PLGA-based implant.
Subject(s)
Lactic Acid , Polyglycolic Acid , Polylactic Acid-Polyglycolic Acid Copolymer , Polyglycolic Acid/chemistry , Lactic Acid/chemistry , Dexamethasone , Water/chemistryABSTRACT
The present study aimed to investigate methods for accelerating autoxidation of crystalline drugs in the solid-state that can potentially predict real-time stability. Solid droperidol (DPD) was selected as the model drug. A common free-radical initiator, 2,2'-azobisisobutyronitrile (AIBN), was used to induce autoxidation in solutions. AIBN decomposes at elevated temperatures to yield carbon-centred cyano-isopropyl free radicals that can auto-oxidize neighboring drug molecules. Although the reaction of AIBN is relatively straightforward in solution, it is less so in solids. In this study, we used solid AIBN mixed with DPD powder in the presence and absence of pressurized oxygen headspace. Samples were prepared directly in the form of binary mixtures with DPD and additionally in the form of powder compact/pellet with DPD. The main challenge in carrying out the reaction was related to the preservation of AIBN at elevated temperatures due to the disintegration of the pellet containing the latter. A commercially available free-radical coated silica particle (i.e., 2,2,6,6-tetramethyl-1-piperinyloxy (TEMPO) or (SiliaCATTM TEMPO)) was tested as a potential stressor, but with limited success to induce autoxidation. The most valuable results were obtained when a physical mixture of pre-milled PVP K-60 containing free radicals and DPD was exposed to elevated oxygen-temperature conditions, which yielded significant degradation of DPD. The study highlights the practical challenges for conducting accelerated solid-state stress studies to assess the autoxidation susceptibility of drugs using traditional free-radical initiators and presents a proof of application of milled PVP with free-radical as a potential alternative.
ABSTRACT
Cellulose acetate (CA) is the main component of controlled-release (CR) coating of formulations such as osmotic-controlled release oral delivery system (OROS) and CR microspheres. Despite multiple applications, there are limited or no reports dealing with the characterization and quantification of CA in the formulated systems. Thus, the present investigation deals with the development of the Quantitative Carbon-13 Nuclear Magnetic Resonance (q13CNMR) spectroscopy method for the determination of CA amount in the CR microsphere formulations. The developed q13CNMR method was also verified using control CA samples from marketed OROS formulation. Thereafter, the concentration of CA in the microspheres was calculated. Furthermore, the impact of different concentrations of CA on the critical quality attributes such as the drug release profile from the formulation was investigated. The study demonstrated the CA coating levels to be inversely proportional to the extent and rate of release of API. The developed q13CNMR method was found to be accurate and precise and can be explored further to investigate the effect of different stability conditions on the degree of polymerization and degradation of CA resulting in altered quality of pharmaceutical products.
Subject(s)
Cellulose , Excipients , Cellulose/analogs & derivatives , Cellulose/chemistry , Delayed-Action Preparations , Magnetic Resonance Spectroscopy , MicrospheresABSTRACT
In the present study, the oxidative degradation behavior of nifedipine (NIF) in amorphous solid dispersions (ASDs) prepared with poly(vinyl pyrrolidone) (PVP) with a short (K30) and a long (K90) chain length was investigated. The ASDs were prepared via dry ball-milling and analyzed using Fourier transform infrared (IR) spectroscopy, X-ray scattering, and differential scanning calorimetry. The ASDs were exposed to accelerated thermal-oxidative conditions using a pressurized oxygen headspace (120 °C for 1 day) and high temperatures at atmospheric pressure (60-120 °C for a period of 42 days). Additionally, solution-state oxidative degradation studies showed that pure NIF degrades to a greater extent than in the presence of PVP. Electronic structure calculations were performed to understand the impact of drug-polymer intermolecular interactions on the autoxidation of drugs. While no drug degradation was observed in freshly prepared ASD samples, alkyl free radicals were detected via electron paramagnetic resonance (EPR) spectroscopy. The free radicals were found to be consumed to a greater extent by PVP K30- than PVP K90-based ASDs upon exposure to high oxygen pressures. This was consistent with the greater solid-state oxidative degradation of NIF observed in ASDs with PVP K30 than with PVP K90. As no drug recrystallization occurred during this study period, the lower glass-transition temperature and presumed greater molecular mobility of PVP K30 and its ASD as compared to the PVP K90 system appear to contribute to the greater drug degradation in PVP-K30-based ASDs. The extent and the rate of oxidative degradation were higher in the case of PVP-K30-based ASD as compared to that in PVP-K90-based ASD, and the overall degradation increased with an increase in temperature. IR spectral analysis of drug-polymer interactions supports the electronic calculations of the oxidation process. We infer that, apart from the initial free radical content, the difference in the extent of drug-polymer intermolecular interactions in ASDs and amorphous stabilization during the forced oxidation experiments contribute to the observed differences in the autoxidative reactivity of the drug in ASDs with different PVP chain lengths. Overall, the chemical degradation of NIF in ASDs with two PVP chain lengths obtained from accelerated solid-state oxidation studies was in qualitative agreement with that obtained from long-term (3 years) storage under ambient conditions. The study highlights the ability of accelerated processes to determine the oxidative degradation behavior of polymeric ASDs and suggests that the polymer chain length could factor into chemical as well as physical stability considerations.
Subject(s)
Nifedipine , Povidone , Calorimetry, Differential Scanning , Polymers/chemistry , Povidone/chemistry , SolubilityABSTRACT
Particle size distribution (PSD), spatial location and particle cluster size of ingredients, polymorphism, compositional distribution of a pharmaceutical product are few of the most important attributes in establishing the drug release-controlling microstructural and solid state properties that would be used to (re)design or reproduce similar products. There are numerous solid-state techniques available for PSD analysis. Laser diffraction (LD) is mostly used to study PSD of raw materials. However, a constraint of LD is the interference between the active pharmaceutical ingredients (API) and excipients, where it is very challenging to measure API size in a tablet. X-ray powder diffraction (XRPD) is widely employed in establishing the polymorphism of API and excipients. This research examined a commercial osmotic tablet in terms of extracting solid state properties of API and functional excipient by Raman Imaging. Establishing repeatability, reproducibility, and sample representativeness when the samples are non-uniform and inhomogeneous necessitates multiple measurements. In such scenarios, when employing imaging-based techniques, it can be time-consuming and tedious. Advanced statistical methodologies are used to overcome these disadvantages and expedite the characterization process. Overall, this study demonstrates that Raman imaging can be employed as a non-invasive and effective offline method for assessing the solid-state characteristics of API and functional excipients in complex dosage forms like osmotic tablets.
Subject(s)
Excipients , Spectrum Analysis, Raman , Particle Size , Reproducibility of Results , TabletsABSTRACT
The present study systematically investigates the effect of annealing conditions and the Kolliphor P 407 content on the physicochemical and structural properties of Compritol (glyceryl behenate) and ternary systems prepared via melt cooling (Kolliphor P 407, Compritol, and a hydrophilic API) representing solid-lipid formulations. The physical properties of Compritol and the ternary systems with varying ratios of Compritol and Kolliphor P 407 were characterized using differential scanning calorimetry (DSC), small- and wide-angle X-ray scattering (SWAXS) and infrared (IR) spectroscopy, and hot-stage microscopy (HSM), before and after annealing. The change in the chemical profiles of different Compritol components as a function of annealing was evaluated using 1H NMR spectroscopy. While no change in the polymorphic form of API and Kolliphor P 407 occurred during annealing, a systematic conversion of the α- to ß-form was observed in the case of Compritol. Furthermore, the polymorphic transformation of Compritol was found to be dependent on the Kolliphor P 407 content. As per the Flory-Huggins mixing theory, higher miscibility was observed in the case of monobehenin-Kolliphor P 407, monobehenin-dibehenin, and dibehenin-tribehenin binary mixtures. The miscibility of Kolliphor P 407 with monobehenin and 1,2-dibehenin was confirmed by 1H NMR analysis. The observed higher miscibility of Kolliphor P 407 with monobehenin and 1,2-dibehenin is proposed as the trigger for the physical separation from the 1,3-diglyceride and triglycerides during melt solidification of the formulations. The phase separation is postulated as the mechanism underlying the formation of a stable ß-polymorphic form (a native form of 1,3-diglyceride) of Compritol upon annealing. This finding is expected to have an important implication for developing stable solid-lipid-surfactant-based drug formulations.
Subject(s)
Excipients , Surface-Active Agents , Calorimetry, Differential Scanning , Drug Compounding , Excipients/chemistry , Phase Transition , Solubility , Surface-Active Agents/chemistryABSTRACT
The present study investigates the chemical composition governing the physical properties of mono- and diglycerides (MDGs) at the microstructural level, as a function of aging and lot-to-lot variability. The physical structure of the MDG plays a vital role in ameliorating the emulsion stability and is widely explored in diverse research horizons related to the pharmaceutical, cosmetic, and food industries. In an effort to understand the mechanism of emulsion stabilization, physical properties were extensively evaluated in selective commercial lots to determine if there is a correlation between the chemical composition of MDG and physical properties. The solid state of the MDG samples with different aging profiles was characterized using X-ray scattering, differential scanning calorimetry, attenuated total reflection-Fourier transform infrared spectroscopy, and NMR relaxometry. Moreover, the kinetic aspect of solid-state transformation was also evaluated via treating MDG samples with a heat-cool cycle. The chemical composition of MDGs was quantified using a quantitative NMR (qNMR) method. Interestingly, the X-ray scattering results demonstrated a change in the MDG polymorphic form and an increase in the %ß content as a function of aging. The increase in the %ß content led to the formation of rigid crystal structures of MDG, as evident from the NMR relaxometry. Chemical quantification of isomeric composition revealed chemical composition change as a potentially critical factor responsible for the altered physical structures of MDG with respect to aging and lot-to-lot variability. The findings correlated the solid-state transformation with the change in the chemical composition of the MDG as a combined effect of aging and lot-to-lot variability. This work serves as a basis to better understand the interdependency of the physicochemical properties of MDG. Furthermore, the present work can also be used as guidance for setting up the specifications of MDG, as per the required polymorphic form for a multitude of applications.
Subject(s)
Diglycerides/chemistry , Excipients/chemistry , Calorimetry, Differential Scanning/methods , Chemistry, Pharmaceutical/methods , Magnetic Resonance Spectroscopy/methods , Spectroscopy, Fourier Transform Infrared/methods , X-Ray Diffraction/methodsABSTRACT
Glycerides are the main components of oils, and fats, used in formulated products in the food and cosmetic industry as well as in the pharmaceutical product industry. However, there is limited literature available on the analysis of the chemical composition of glycerides. The lack of a suitable analytical method for complete chemical profiling of glycerides is one of the bottlenecks in understanding and controlling the change in chemical composition during processing, formulation, and storage. Thus, the aim of the present study is to develop a calibration-free quantitative proton nuclear magnetic resonance (qHNMR) method for the simultaneous quantification of different components of glycerides. The qHNMR method was developed for the quantification of mono-, di-, and triglycerides; their positional isomers; free fatty acids; and glycerol content. The accuracy, precision, and robustness of the developed method were evaluated and were found suitable for the quantitative analysis of five batches of marketed excipient. The study demonstrates the potential of qHNMR method for the quantification of different components of glycerides in various marketed products. The method has the ability to identify the variability of glycerides among different batches and suppliers in terms of chemical composition and also to discern the changes during storage.
Subject(s)
Excipients/chemistry , Glycerides/chemistry , Proton Magnetic Resonance Spectroscopy/methods , Triglycerides/analysisABSTRACT
The present study investigates concomitant processes of solid-state disordering and oxidation of simvastatin during milling. The separate dry ball milling of crystalline and amorphous powders of simvastatin were conducted at ambient temperature for 10 and 60 min each. The relative crystallinity was determined using X-ray scattering and oxidative degradation was analyzed using liquid chromatography. The physical and chemical transformations in the milled powder were evaluated using modulated differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy. The disordering during milling of the crystalline powder was found to progressively decrease the crystallinity. For the amorphous starting material, milling for 10 min induced a large extent of recrystallization, while milling for 60 min largely re-amorphized the powder. This solid-state disordering and/or ordering were accompanied by progressive air oxidation during milling. The infrared spectroscopic analysis revealed the molecular manifestations associated with the physicochemical transformations in the disordered solid states. The melting point of simvastatin depressed systematically with the increase in the degree of disorder as well as the degradation. The in situ cooling in DSC of milled samples from their molten state led to the formation of the co-amorphous phase between the drug and degradation products, which showed a consistent increase in glass transition temperature with the increase in the content of degradation products. The study overall demonstrates the solid-state re-ordering and disordering of crystalline and amorphous simvastatin accompanied by chemical degradation as the consequence of the mechano-activation.
Subject(s)
Hydroxymethylglutaryl-CoA Reductase Inhibitors/chemistry , Simvastatin/chemistry , Calorimetry, Differential Scanning , Differential Thermal Analysis , Drug Compounding , Hydroxymethylglutaryl-CoA Reductase Inhibitors/administration & dosage , Light , Phase Transition , Powders , Scattering, Radiation , Simvastatin/administration & dosage , Spectrophotometry, Infrared , X-RaysABSTRACT
The present work demonstrates the utility of temperature controlled set up with pressurized headspace oxygen as an approach to effectively reduce the time required for solid-state drug-excipient compatibility study. To illustrate the utility, the incompatibility of polyethylene glycol (PEG) and polyethylene oxide (PEO) with Famotidine (Fam) was shown. Owing to thermal and oxidative stress, polyethylene ether moieties of PEG generated reactive impurities, resulting in the degradation of Fam. The chemical degradation was evaluated via liquid chromatography. Around 20% of degradation was observed in the pressurized oxygen set up, whereas, no degradation was found in the absence of oxidative stress. On increasing the excipient fraction, the Fam degradation increased proportionally. Formation of aldehydes and free radicals from excipients were proposed as the precursors for Fam degradation. The generation of aldehydes and free radicals was confirmed by infrared and Electron Spin Resonance (ESR) spectroscopic analysis, respectively. Overall, the present study demonstrated the utility of pressurized oxygen set up as a rapid and routine tool for studying drug-excipient incompatibility at temperatures relevant drug-product manufacture.
Subject(s)
Drug Incompatibility , Excipients/chemistry , Famotidine/chemistry , Polyethylene Glycols/chemistry , Chemistry, Pharmaceutical/methods , Chromatography, Liquid/methods , Feasibility Studies , Oxidative Stress , Oxygen/chemistry , TemperatureABSTRACT
A group of plant specialised metabolites (PSMs) collectively known as unsubstituted B-ring flavanones (UBFs) have previously been found in the foliage of some species from the genus Eucalyptus L'Hér. (Myrtaceae), specifically from the subgenus Eucalyptus (monocalypts). Captive feeding studies using artificial diets suggest that these compounds may potentially influence the feeding preferences of marsupial folivores, such as koalas. Understanding natural variation in the composition and concentration of UBFs in eucalypt foliage is a first step to deciding whether, through their effects on herbivory, they might have broader effects on ecosystem dynamics. We used ESI-LCMS/MS and HPLC to characterise and quantify UBFs in 351 individual trees from 25 monocalypt species. We found large variation in the total UBF concentration both between and within species. For example, the mean concentration of UBFs in Eucalyptus muelleriana was 0.2â¯mgâ¯g-1 dry wt, whereas it was 105.7â¯mgâ¯g-1 dry wt, with a range of 78.2-141.3â¯mgâ¯g-1 dry wt, in Eucalyptus mediocris. Different eucalypt species contained different subsets of ten UBFs, and three species showed potential chemotypic variation between individuals within species. Our results suggest that UBFs naturally vary between monocalypt species and individuals at concentrations that could realistically be expected to affect the feeding dynamics of marsupial eucalypt folivores. UBFs could be measured relatively rapidly and cheaply in future studies using near-infrared reflectance (NIR) spectroscopy, as we were able to successfully predict the total UBF concentration of samples from their NIR spectra, with an r2 value of 0.98 and a standard error of prediction (SEP) of 6.07. This work further solidifies NIR spectroscopy as a powerful tool enabling ecologists to analyse the chemical composition of large numbers of samples.
Subject(s)
Eucalyptus/chemistry , Flavanones/analysis , Flavanones/chemistry , Flavanones/isolation & purification , HydrolysisABSTRACT
Secondary plant metabolites play an important role in providing protection to plants against herbivore insect pests. Keeping in view the increasing importance of biopesticides, the crude extracts from different plants are being investigated for insecticidal activities. Alpinia galanga, a medicinal plant belonging to family Zingiberaceae exhibits a wide range of biological activities. In the present study, crude extracts of A. galanga and its purified compounds i.e. 1'-acetoxychavicol acetate and galangin were evaluated for their effect on various nutritional parameters of Spodoptera litura (Fab.). All the extracts exhibited a significant influence on relative growth and consumption rates as well as efficiency of conversion of ingested and digested food. Ethyl acetate extract was found to be the most effective causing significant reduction in values of RGR, RCR, ECI and ECD of S. litura larvae in comparison to control larvae. The highest concentration of the ethyl acetate extract (2500â¯ppm) resulted in 44.95%, 10.99%, 38.08% and 37.04% decrease respectively in RGR, RCR, ECI and ECD in comparison to control. The purified compounds also showed inhibitory effects on various nutritional parameters. 1'-Acetoxychavicol acetate was found to be more effective in comparison to galangin.
Subject(s)
Alpinia/chemistry , Nutritional Physiological Phenomena/drug effects , Plant Extracts/pharmacology , Spodoptera/drug effects , Animals , Benzyl Alcohols/pharmacology , Biological Control Agents/pharmacology , Flavonoids/pharmacology , Larva/drug effects , Plants, Medicinal/chemistry , Spodoptera/metabolismABSTRACT
The present study investigates effect of linkers [zero length (without linker), short length linker (glycine and lysine) and long length linker (PEG1000, PEG2000 and PEG3500)] on pharmacokinetics and toxicity of docetaxel (DTX) and gemcitabine (GEM) bio-conjugates. Conjugates were synthesized via carbodiimide chemistry and characterized by 1H NMR and FTIR. Conjugation of DTX and GEM via linkers showed diverse physiochemical and plasma stability profile. Cellular uptake mechanism in MCF-7 and MDA-MB-231 cell lines revealed clathrin mediated internalization of bio-conjugates developed by using long length linkers, leading to higher cytotoxicity compared with free drug congeners. DTX-PEG3500-GEM and DTX-PEG2000-GEM demonstrated 4.21 and 3.81-fold higher AUC(0-∞) of GEM in comparison with GEM alone. DTX-PEG2000-GEM and DTX-PEG3500-GEM exhibited reduced hepato-, nephro- and haemolytic toxicity as evident via histopathology, biochemical markers and SEM analysis of RBCs. Conclusively, PEG2000 and PEG3500 significantly improved pharmacokinetics without any sign of toxicity and hence can be explored further for the development of dual-drug conjugates for better therapeutic efficacy.
Subject(s)
Antineoplastic Agents , Deoxycytidine/analogs & derivatives , Taxoids , Animals , Antineoplastic Agents/chemistry , Antineoplastic Agents/pharmacology , Cell Line, Tumor , Cell Survival/drug effects , Deoxycytidine/chemistry , Deoxycytidine/pharmacology , Docetaxel , Drug Combinations , Female , Hemolysis/drug effects , Humans , Polyethylene Glycols/chemistry , Polyethylene Glycols/pharmacology , Rats, Sprague-Dawley , Taxoids/chemistry , Taxoids/pharmacology , GemcitabineABSTRACT
ETHNOPHARMACOLOGICAL RELEVANCE: Ocimum species are traditionally used for the treatment of anxiety, nerve pain, convulsions and a variety of neurodegenerative disorders. The present study was undertaken to evaluate the anti-amnesic effect of O. basilicum L., O. sanctum L. and O. gratissimum L. extracts using in-vitro and in-vivo models. MATERIALS AND METHODS: In-vitro acetylcholinesterase (AChE) inhibitory and antioxidant activities of hydro-methanol extracts of plants were evaluated using Ellman and DPPH and FRAP assays, respectively. The most active extract i.e. O. basilicum extract (OBE) was further explored for the possible anti-amnesic activity in mouse model of scopolamine induced amnesia using behavioral models (elevated plus maze and passive shock avoidance task). Brain AChE activity, oxidative profile and histopathological studies were assessed to outline the anti-amnesic mechanism of the extract. RESULTS: Significant antioxidant and AChE inhibition activity was observed with all prepared extracts and however, OBE showed most marked free radical scavenging, reducing power and AChE inhibition (IC50 0.65±0.15mg/ml) activity. Basil leaves were standardized with respect to content of 7 phenolic acids using a HPLC-PDA method. A TLC densitometric method was employed to determine the quercetin content in the leaves. The in-vivo studies showed that OBE pre-treatment (200 and 400mg/kg, p.o.) reversed the memory deficit induced by scopolamine in mice, evident by significant (p<0.05) decrease in the transfer latency time and increase in step down latency in elevated plus maze and passive shock avoidance task, respectively. Moreover, OBE significantly reduced the brain AChE activity and oxidative stress. Further, histopathological examination of brain tissues displayed decrease in vacuolated cytoplasm and increase in pyramidal cells in hippocampal and cortical regions with OBE pre-treatment. CONCLUSION: OBE possesses antioxidant and AChE inhibitory activity. These biochemical changes are responsible for the anti-amnesic and neuroprotective activities of O. basilicum which may be attributed to the presence of phenolic and flavonoid compounds. This can be developed as an effective anti-amnesic drug.