Exploring fiberglass post numbers for enhanced fatigue resistance in molars without coronary remnants.

This study aimed to assess the fatigue resistance of molars lacking a coronary remnant, using zero, one, two, or three fiberglass posts. Forty caries/crack-free human molars with coronal portions removed at the pulp chamber floor were randomly allocated into four groups (n=10). Following endodontic treatment, posts (Whitepost DC/DC.E 0.5, 1.0, FGM) were silanized (silane agent, Angelus) and cemented with a resin cement (RelyX U200, 3M ESPE). Resin composite cores (Z350, 3M ESPE) were built, and metal crowns were fabricated and cemented using the same luting system. Samples underwent cyclic fatigue testing at 45°, applying load in the occlusal surface at 10 Hz and 100 N initial load for 10,000 cycles, with 50 N increments every 10,000 cycles until failure. Fatigue failure load and cycles for failure data were recorded and subjected to survival analysis through Kaplan-Meier and Mantel-Cox post hoc tests, and Weibull analysis. Fractography patterns of failed crowns were qualitatively analyzed. The group without posts exhibited the lowest fatigue performance (p < 0.05) for both fatigue failure load and cycles to failure. Superior fatigue performance was observed in the three-post group, followed by groups with one or two posts, corroborated by the Weibull characteristic strength parameter. Weibull moduli were similar among conditions. All specimens exhibited failure involving detachment of the restorative set (posts/core/crown) with a portion of the dental remnant, without tooth fracture. Thus, when restoring mandibular molars without crown remnants, the use of fiberglass posts promotes greater fatigue resistance to oblique loads.

Assessing transparency practices in dental randomized controlled trials.

BACKGROUND: To evaluate transparency practices in randomized controlled trials (RCTs) in dentistry. METHODS: This meta-research study included RCTs in dentistry regardless of topic, methods, or level of detail reported. Only studies in English were considered. We searched PubMed for RCTs in dentistry published in English from December 31, 2016, to December 31, 2021. The screening was performed in duplicate, and data extracted included journal and author details, dental specialty, protocol registration, data and code sharing, conflict of interest declaration, and funding information. A descriptive analysis of the data was performed. We generated maps illustrating the reporting of transparency items by country of the corresponding author and a heat table reflecting reporting levels by dental specialty. RESULTS: A total of 844 RCTs were included. Only 12.86% of studies reported any information about data and code sharing. Protocol registration was reported for 50.36% of RCTs. Conflict of interest (83.41%) and funding (71.68%) declarations were present in most studies. Conflicts of interest and funding were consistently reported regardless of country or specialty, while data and code sharing had a low level of reporting across specialties, as well as low dissemination across the world. Protocol registration exhibited considerable variability. CONCLUSIONS: Considering the importance of RCTs for evidence-based dentistry, it is crucial that everyone who participates in the scientific production and dissemination process actively and consistently promotes adherence to transparent scientific standards, particularly registration of protocols, and sharing of data and code.

Influence of CAD-CAM milling strategies on the outcome of indirect restorations: A scoping review.

STATEMENT OF PROBLEM: The influence of computer-aided manufacturing (CAM) parameters and settings on the outcomes of milled indirect restorations is poorly understood. PURPOSE: The purpose of this scoping review was to summarize the current CAM systems, parameters, and setting changes, and their effects on different outcomes of milled indirect restorations and aspects related to their manufacture. MATERIAL AND METHODS: The protocol of this review is available online (https://osf.io/x28ps/). Studies that used at least 2 different parameters (CAM units, number of axes, digital spacers, or protocols with different rotatory instruments, grit-sizes, milling speed, or others) for milling indirect restorations were included. A structured search up to July 2023 was performed by 2 independent reviewers for articles written in English in LILACS, MEDLINE via PubMed, EMBASE, Web of Science, and Scopus. RESULTS: Of 1546 studies identified, 22 were included in the review. Discrepancies were found between the planned and actual measured cement space, with a decreasing linear relationship impacting restoration adaptation at different points. The CEREC MC XL milling machine was the most used system in the included studies, with variations in bur types, milling modes, and number of burs uses affecting internal fit and surface trueness. The results demonstrated the better adaptation of restorations made with 5-axis over 3-axis milling machines. Lithium disilicate and zirconia were the most commonly used materials, and crowns and inlays were popular designs. Marginal and internal adaptation were the primary outcomes assessed using the various techniques. CONCLUSIONS: The study presented a comprehensive exploration of CAM systems and parameters, and their influence on indirect restorations. The planned cement space was not properly reproduced by the milling. Bur characteristics can affect restoration fit and trueness. The 5-axis units seem to result in better-adapted restorations compared with 3- and 4-axis units.

Endorsement of open science practices by dental journals: A meta-research study.

OBJECTIVES: This study evaluates the endorsement of open science practices by dental journals. MATERIALS AND METHODS: This was a meta-research study that included journals listed in the 2021 Journal Citation Reports under Dentistry. A comprehensive evaluation was performed by accessing journal websites to ascertain the availability of publicly accessible instructions to authors in Portuguese, English, or Spanish. A researcher extracted information from the "Instructions for Authors" section, encompassing the journal's impact factor, mention of any reporting guidelines, details on data sharing, acceptance of articles in preprint format, and information regarding study protocol registration. Descriptive data analysis was conducted using the Stata 14.0 program, and an Open Science Score (OSS) (ranging from 0 to 100 %) was calculated for each journal by considering five open science practices. Pearson's correlation test was conducted to determine the relationship between the OSS score and journal impact factor. RESULTS: Ninety journals were included in the study. Most journals (70 %) indicated the mandatory use of reporting guidelines, while 60 % recommended data sharing. Conversely, 46.7 % did not provide information on study protocol registration, and 44.4 % stipulated them as mandatory for authors. Regarding preprints, 50 % of the journals did not provide any information, but 46.7 % confirmed their acceptance. The mean OSS was 52.9 % (standard deviation 26.2). There was a weak correlation (Pearson's correlation coefficient of 0.221) between the journal impact factor and OSS (P-value=0.036). CONCLUSION: This study found varying degrees of endorsement of open science practices among dental journals. CLINICAL SIGNIFICANCE: Dental practitioners rely on high-quality, evidence-based research for informed decision-making. By assessing the endorsement of open science practices, our study contributes to improving the quality and reliability of dental research, ultimately enhancing the evidence base for clinical practice.

Structural Relationships between Asthma and Dental Caries in Children: A Birth Cohort Study in Southern Brazil.

INTRODUCTION: There is an inconclusive causal association between asthma symptoms and dental caries in the primary dentition. This study aimed to investigate, using SEM (structural equation modeling), a possible causal relation between asthma and dental caries in the primary dentition. METHODS: Using data from the 2004 Pelotas Birth Cohort Study, a sub-sample of 1,303 individuals was selected. Dental caries was clinically evaluated at 5 years old based on decayed, missing, and filled tooth (dmft) index criteria. Asthma-related symptoms (wheezing and shortness of breath) at 1- and 4-year-olds composed a latent variable and were the main exposures to caries occurrence. SEM was used to identify possible direct, indirect, and mediated effects of asthma in primary dentition dental caries. RESULTS: The general prevalence of caries at age 5 was 1.95 (SD: 3.56). When comparing the dmft values for children with asthma symptoms and those without, they presented similar values in both periods where asthma symptoms were evaluated (1- and 4-year-old). SEM analysis showed that asthma was neither directly nor indirectly related to dental caries. CONCLUSION: Asthma, using a latent variable constructed based on asthma symptoms, showed no causal effect on dental caries occurrence in the primary dentition.

Assessment of studies on oral manifestations and COVID-19: a meta-research study

This study aimed to evaluate how different study designs influences the presence and characteristics of diagnosis of oral manifestations in patients with COVID-19. Methods: This study is a meta-search conducted with studies evaluating the relationship between patients with oral manifestations and COVID-19. A search was conducted in three databases (PubMed, Web of Science, and Scopus), using terms specific to COVID-19 and oral lesions, including only primary studies. Study selection was undertaken by two reviewers independently. A descriptive analysis was performed. Results: The results included 55 studies in the data synthesis analysis. Most of the studies were case reports and case series. Some of the studies did not relate a biological test to confirm COVID-19. The ulcer lesion and that clinical examination by specialists were the most reported lesion in case reports and case series studies, while taste alterations and patient self-report were more reported in observational studies. Conclusions: This review concluded that the oral lesions in patients with COVID-19 differ according to the study design. The lack of high-quality scientific evidence in the dental literature on COVID-19 makes the findings inconsistent by the lack of sample selection criteria, diagnostic criteria and classification of oral lesions

Exploring fiberglass post numbers for enhanced fatigue resistance in molars without coronary remnants

Abstract This study aimed to assess the fatigue resistance of molars lacking a coronary remnant, using zero, one, two, or three fiberglass posts. Forty caries/crack-free human molars with coronal portions removed at the pulp chamber floor were randomly allocated into four groups (n=10). Following endodontic treatment, posts (Whitepost DC/DC.E 0.5, 1.0, FGM) were silanized (silane agent, Angelus) and cemented with a resin cement (RelyX U200, 3M ESPE). Resin composite cores (Z350, 3M ESPE) were built, and metal crowns were fabricated and cemented using the same luting system. Samples underwent cyclic fatigue testing at 45°, applying load in the occlusal surface at 10 Hz and 100 N initial load for 10,000 cycles, with 50 N increments every 10,000 cycles until failure. Fatigue failure load and cycles for failure data were recorded and subjected to survival analysis through Kaplan-Meier and Mantel-Cox post hoc tests, and Weibull analysis. Fractography patterns of failed crowns were qualitatively analyzed. The group without posts exhibited the lowest fatigue performance (p < 0.05) for both fatigue failure load and cycles to failure. Superior fatigue performance was observed in the three-post group, followed by groups with one or two posts, corroborated by the Weibull characteristic strength parameter. Weibull moduli were similar among conditions. All specimens exhibited failure involving detachment of the restorative set (posts/core/crown) with a portion of the dental remnant, without tooth fracture. Thus, when restoring mandibular molars without crown remnants, the use of fiberglass posts promotes greater fatigue resistance to oblique loads.

Resumo O objetivo deste estudo foi avaliar a resistência à fadiga de molares sem um remanescente coronário, utilizando zero, um, dois ou três pinos de fibra de vidro. Quarenta molares humanos livres de cárie e fissuras, com porções coronárias removidas ao nível do assoalho da câmara pulpar, foram alocados aleatoriamente em quatro grupos (n=10). Após o tratamento endodôntico, os pinos (Whitepost DC/DC.E 0.5, 1.0, FGM) foram silanizados (agente silano, Angelus) e cimentados com um cimento resinoso autoadesivo (RelyX U200, 3M ESPE). Núcleos de resina composta (Z350, 3M ESPE) foram construídos, coroas metálicas foram fabricadas e cimentadas usando o mesmo sistema de cimentação. As amostras foram submetidas a testes de fadiga cíclica a 45°, aplicando carga na superfície oclusal a 10 Hz e carga inicial de 100 N por 10.000 ciclos, com incrementos de 50 N a cada 10.000 ciclos até a ocorrência da falha. Os dados de carga de falha por fadiga e ciclos até a falha foram registrados e submetidos à análise de sobrevivência por meio de testes post hoc de Kaplan-Meier e Mantel-Cox, além de análise de Weibull. Os padrões de fratura das coroas que falharam foram analisados qualitativamente. O grupo sem pinos apresentou o desempenho mais baixo em fadiga (p < 0,05) tanto para carga de falha por fadiga quanto para ciclos até a falha. Um desempenho superior em fadiga foi observado no grupo com três pinos, seguido pelos grupos com um ou dois pinos, corroborado pelo parâmetro de resistência característica de Weibull. Os módulos de Weibull foram semelhantes entre as condições. Todas as amostras apresentaram falha envolvendo desprendimento do conjunto restaurador (pinos/núcleo/coroa) com uma porção do remanescente dentário, sem fratura do dente. Portanto, ao restaurar molares mandibulares sem remanescente coronário, o uso de pinos de fibra de vidro promove uma maior resistência à fadiga a cargas oblíquas.

Metaresearch study highlights the gender gap in randomized controlled trials in dentistry.

BACKGROUND AND OBJECTIVES: This study aimed to assess the gender gap in randomized controlled trials (RCTs) in dentistry in terms of authorship, collaborations, metrics, funding and reporting of good research practice and transparecy. METHODS: The search was performed in PubMed for RCTs restricted to English texts in the dental field, indexed from 12/31/2016 to 12/31/2021. Two reviewers screened the studies in line with the eligibility criteria. A total of 844 articles were included. The name and gender of authors, citation metrics, funding, reporting of characteristics of good research practice and transparency were extracted. We considered "collaboration between authors" when the corresponding author was different from the first author. RESULTS: The proportion of women as first authors was 46.56% and 40.12% for corresponding authors. The analysis showed that when a woman is the corresponding author, the probability of the first author also being a woman is 57% higher compared to the first author being a man. For "protocol registration" and "data sharing," the prevalence of reporting was higher when women were first authors. CONCLUSION: A gender gap in dentistry RCTs was identified and related to the participation of women as first and corresponding authors and the collaboration between authors.

Use of platelet concentrates in oral surgery of patients with osteonecrosis: a scoping review.

The objective of this study was to map, through a scoping review, the evidence available in the literature on the use of platelet concentrates in compromised patients undergoing oral surgeries. Searches were performed in electronic databases for clinical studies with compromised patients undergoing oral surgery who used platelet concentrates. Only studies published in English were included. Two independent researchers carried out the selection of studies. The study design and objective, surgical procedure and platelet concentrate used, systemic involvement, analyzed outcome, and main results were extracted. A descriptive analysis of the data was performed. Twenty-two studies met the eligibility criteria and were included. Case series was the most frequent study design among the included studies (41.0%). In terms of systemic disability, 19 studies reported patients with cancer and related to surgical treatment 16 studies reported patients underwent treatment for osteonecrosis related to the use of the drug. The most used platelet concentrate was pure platelet-rich fibrin (P-PRF). In general, most studies recommend the use of platelet concentrates. Thus, the results of this study suggest that the evidence related to the use of platelet concentrates in compromised patients when undergoing oral surgeries is still initial. Also, most studies assessed the use of platelet concentrates in patients with osteonecrosis.

Use of platelet concentrates in oral surgery of patients with osteonecrosis: a scoping review

Abstract The objective of this study was to map, through a scoping review, the evidence available in the literature on the use of platelet concentrates in compromised patients undergoing oral surgeries. Searches were performed in electronic databases for clinical studies with compromised patients undergoing oral surgery who used platelet concentrates. Only studies published in English were included. Two independent researchers carried out the selection of studies. The study design and objective, surgical procedure and platelet concentrate used, systemic involvement, analyzed outcome, and main results were extracted. A descriptive analysis of the data was performed. Twenty-two studies met the eligibility criteria and were included. Case series was the most frequent study design among the included studies (41.0%). In terms of systemic disability, 19 studies reported patients with cancer and related to surgical treatment 16 studies reported patients underwent treatment for osteonecrosis related to the use of the drug. The most used platelet concentrate was pure platelet-rich fibrin (P-PRF). In general, most studies recommend the use of platelet concentrates. Thus, the results of this study suggest that the evidence related to the use of platelet concentrates in compromised patients when undergoing oral surgeries is still initial. Also, most studies assessed the use of platelet concentrates in patients with osteonecrosis.

Resumo O objetivo do estudo foi mapear, através de uma revisão de escopo, as evidências disponíveis na literatura sobre o uso de agregrantes plaquetários em pacientes comprometidos e que realizaram cirurgias odontológicas. Pesquisas foram realizadas em bases de dados por estudos clínicos com pacientes comprometidos que realizaram cirurgia odontológica e usaram agragantes plaquetários. Apenas estudos em inglês foram incluídos. Dois pesquisadores independentes realizaram a seleção dos estudos. Os seguintes dados foram extraídos: desenho do estudo, objetivo, procedimento cirúrgico, agregante plaquetário usado, envolvimento sistêmico, desfecho analisado e principais resultados. Uma análise descritiva dos dados foi realizada. Vinte e dois estudos preencheram os critérios de elegibilidade e foram incluídos. Série de casos foi o desenho de estudo mais frequente entre os estudos incluídos (41,0%). Em relação ao comprometimento sistêmico, 19 estudos reportaram pacientes com câncer e em relação ao tratamento cirúrgico, 16 estudos reportaram pacientes que realizavam tratamento para osteonecrose relacionada ao uso de medicamentos. O agregante mais utilizado foi o plasma rico em fribina (P-PRF). Em geral, maioria dos estudos recomendou o uso dos agregantes plaquetários. Assim, os resultados desse estudo sugerem que a evidência relacionada ao uso de agregantes plaquetários em pacientes comprometidos que realizam cirurgia odontológica é ainda inicial. Ainda, a maioria dos estudos avaliaram o uso de agregantes plaquetários em pacientes com osteonecrose.

Reporting quality of scoping reviews in dental public health.

BACKGROUND: The study aimed to explore reporting characteristics of scoping reviews in dental public health and the impact of some factors on the reporting quality. METHODS: This study searched for dental public health scoping reviews in PubMed and Scopus without year restrictions and restricted to English-language publications. Study selection was undertaken by two reviewers independently. One reviewer, after training, extracted data from included studies considering general study characteristics and reporting characteristics. The impact of PRISMA-ScR publication, journal endorsement, and use of study protocol on the reporting was explored. RESULTS: Eighty-one scoping reviews were included. Five items presented rates of appropriate reporting higher than 80% considering the overall percentage. Related to the impact of PRISMA-ScR publication, six items were found more often in scoping reviews published after the publication of PRISMA-ScR than in scoping reviews published before the publication of PRISMA-ScR. With regards to journals endorsement, only two reporting characteristics were found more often in scoping reviews published in journals that endorse the PRISMA-ScR statement than in scoping reviews published in non-endorsers journals. Last, regarding the use of the pre-specified protocol, five reporting characteristics presented differences in studies reporting the use of pre-specified protocol than in studies that did not mention the use of a protocol. All differences were statistically significant. CONCLUSIONS: Important information is missing in the included scoping reviews demonstrating crucial reporting problems.

Teaching of composite restoration repair in Brazilian dental schools.

OBJECTIVES: The aim was to investigate aspects of the teaching of restoration repair as a minimally invasive alternative to replacing defective direct composite restorations in undergraduate curricula teaching programs in Brazilian dental schools. METHODS: A 14-item validated survey questionnaire was mailed to directors/coordinators of operative/restorative dentistry teachers of Brazilian Dental Schools. Data were collected on demographic characteristics of the teachers and institutions, together with questions on the teaching of the repair of defective resin-based composite restorations as part of the school curriculum; the rationale behind the teaching; the nature of the teaching (preclinical and/or clinical); how techniques were taught, indications for repair, operative techniques, materials used, patient acceptability and expected longevity of completed repairs. RESULTS: Two hundred and twenty-two (94%) directors/ coordinators of dental curricula in Brazil were contacted. One hundred and thirty-one directors/coordinators (59%) replied, providing the e-mail address from the teacher responsible for the operative/restorative dentistry program in their school. Of these, 104 responded to the questionnaire (79% response rate). Ninety-three (89%) of the participating schools reported teaching composite repairs as an alternative to replacing restorations. Of the theoretical content, 43% was taught at preclinical and clinical levels, whereas most practical experience (53%) was acquired at clinical levels. Eighty-eight schools (95%) reported tooth substance preservation being the main reason for teaching repair techniques. All schools that taught repairs reported high patient acceptability. CONCLUSIONS: The teaching of composite restoration repair as an alternative to restoration replacement is established in undergraduate programs in most of the Brazilian dental schools surveyed. CLINICAL SIGNIFICANCE: The reasons for teaching restoration repair in Brazil were found to be quite unanimous among teachers, especially regarding the preservation of tooth structure. Variations were found in the clinical indications for repair, suggesting the need for further investigations. Monitoring repaired restorations should be encouraged and could contribute to future studies.

Reporting characteristics of systematic review abstracts published in the proceedings of the SBPqO meeting

Aim: This study aimed to assess the reporting characteristics of systematic review abstracts published in the proceedings of the Sociedade Brasileira de Pesquisa Odontológica (SBPqO) meeting. Methods: We selected abstracts published in the SBPqO meeting proceedings of 2019 and 2020, mentioning that a systematic review was conducted in the title, objective or methods sections. One researcher performed the screening and the data extraction after a pilot test training. The following data were extracted: affiliation of the primary author, dental specialization, the term "systematic review" mentioned in the title, reporting of the objective, reporting of eligibility criteria, reporting of information sources, reporting of the number of included studies and if a meta-analysis was performed. A descriptive analysis of the data was performed with data summarized as frequencies. Results: We included 235 abstracts. A total of 20 studies were from the Universidade de Uberlândia (8.5%), and the main specialization was Restorative and Esthetic Dentistry, with 47 studies (20%). Most of the studies mentioned the term "systematic review" in the title (n=219; 93.2%) and reported the objective (n=231; 98.3%). A great majority of studies did not report the eligibility criteria (n=97; 41.3%) or it was classified as unclear (n=96; 40.8%). The great majority of studies only reported the databases searched (n=103; 43.8%) or databases and date of search (n=74; 31.5%). Most of the studies reported the number of included studies (n=204; 86.8%). Conclusion: Based on this study, the reporting characteristics of systematic review abstracts published in the proceedings of the SBPqO meeting are satisfactory. However, there is room for improvement

Influence of connector cross-sectional geometry on the load-bearing capacity under fatigue of implant-supported zirconia fixed partial prosthesis.

STATEMENT OF PROBLEM: Zirconia has been reported to be suitable for multiunit monolithic restorations. However, as the connector region is the weakest part of the system, studies are needed to determine the optimal connector geometry. PURPOSE: The purpose of this in vitro study was to evaluate the load-bearing capacity under fatigue of implant-supported fixed partial prostheses made of monolithic zirconia with different connector cross-sectional geometries. MATERIAL AND METHODS: Three-unit monolithic fixed partial prostheses (from mandibular second premolar to the second molar) were fabricated in zirconia (Zenostar T) by computer-aided design and computer-aided manufacture (CAD-CAM). Different connector cross-sectional geometries, with an area of 9 mm2, were tested (n=10): round, square with rounded angles, or trapezoid with rounded angles. The prostheses were screwed over 2 implants and inserted into acrylic resin bases. The specimens were submitted to a mechanical fatigue test until failure, with load applied to the pontic using the stepwise stress methodology (initial load of 100 N for 5000 cycles, followed by an increase to 200 N for 20 000 cycles, with a subsequent increase of 50 N each step). For data analysis, fatigue failure load (FFL) and cycles for fatigue failure (CFF) were recorded. Failed structures were analyzed by fractography. The Kaplan-Meier test followed by a log-rank Mantel-Cox post hoc test was used to analyze FFL and CFF (α=.05). Weibull analysis was also performed. RESULTS: The round (1065 N) and trapezoid (1010 N) groups presented higher FFL values than the square one (870 N) (P≤.05). For CFF, the round connector (358 777) was better than the square (280 310) (P=.006), and the trapezoid (337 773) was statistically similar to both (P>.05). No difference among groups was observed in Weibull modulus either for CFF or FFL data. All failures were catastrophic, originating at the base of the connector and propagating toward the occlusal surface of the pontic (region under loading). CONCLUSIONS: The connector cross-sectional geometry significantly influenced the mechanical fatigue performance of implant-supported fixed partial prostheses made of monolithic zirconia.

There is room for improvement in the use of scoping reviews in dentistry.

OBJECTIVE: To evaluate the reporting of authors' justifications for choosing the scoping review methodology in oral health. STUDY SELECTION, DATA AND SOURCE: This is a meta-research study about scoping reviews in dentistry. This study searched for reviews in PubMed and Scopus without year restrictions and restricted to English-language publications. Study selection was undertaken by two reviewers independently. Each of these reviewers extracted data from half of the included studies considering general study characteristics and scoping reviews objectives, as well as data about whether or not the authors clearly explained why they chose the scoping review framework. RESULTS: We included 184 articles. Ninety-seven of the reports did not provide a rationale as to why they chose the scoping review method (52.7%). Regarding the reported aims of the studies, 29.9% (n = 29/87) of the scoping reviews presented more than one. When comparing studies reporting the use of the PRISMA-ScR to those not reporting the PRISMA-ScR, there is no difference in the reporting of a clear explanation of why the authors used a scoping review method. CONCLUSION: There is room for improvement in how authors report their justifications for choosing the scoping review method. CLINICAL SIGNIFICANCE: Scoping reviews may be used by researchers who are unaware of this method. Educational initiatives should thus be encouraged.

Factors influencing the clinical performance of the restoration of endodontically treated teeth: An assessment of systematic reviews of clinical studies.

STATEMENT OF PROBLEM: How best to restore endodontically treated teeth is still unclear because many types of material and techniques are involved. PURPOSE: The purpose of this overview of systematic reviews of clinical studies was to assess the available evidence-based literature on the influence of associated clinical factors on the clinical performance (survival, failure rate, or success) of restored endodontically treated teeth. MATERIAL AND METHODS: PubMed, Scopus, and Web of Science were searched from inception until September 27, 2021, to identify systematic reviews. Two reviewers independently screened titles, abstracts, and full-text articles, and each reviewer extracted the data of half of the included studies. A single reviewer with an independent verifier completed the quality appraisal. A descriptive analysis of the collected data was made. RESULTS: A total of 36 systematic reviews fulfilled the inclusion criteria. The factors most assessed were the type of coronal restorative technique (n=22) and type of post (n=22). The results indicated that metal and fiber posts seem to present similar clinical performance, endocrowns could be a suitable restorative option, there is no evidence to confirm whether single crowns are better or worse than direct restoration, the maintenance of the coronal structure is a fundamental factor, and the ferrule effect is still a controversial topic. Most of the studies (n=30, 81%) presented a final Grading of Recommendations, Assessment, Development and Evaluations (GRADE) rating of "critically low." CONCLUSIONS: The post type does not appear to influence the clinical performance of restored endodontically treated teeth. However, conclusive evidence to suggest how different materials or techniques for restoring coronal tooth structure affect the clinical performance of such restorations, as well as the impact of the ferrule effect, is still lacking.

Systematic reviews on the success of dental implants present low spin of information but may be better reported and interpreted: An overview of systematic reviews with meta-analysis.

OBJECTIVE: To estimate the prevalence of spin and completeness of reporting of systematic reviews with metanalysis (SRMAs) in implant dentistry. STUDY DESIGN AND SETTING: Inclusion criteria were SRMAs of randomized clinical trials of implant dentistry on survival, success, or failure rates in humans, with no language restriction. Three databases were searched from inception to May 2021. Main outcomes were prevalence of spin (primary outcome) and completeness of reporting (secondary outcome) in abstracts and full texts. RESULTS: We identified 2481 SRMAs and 45 unique manuscripts were included. There was a low presence of spin in the abstracts and full text, except for adverse events, in which 51.1% (in the abstract) failed to mention any adverse event for summarized interventions. There was an adequate report of SRMAs in the full text except for prospective register (33.3% not reported). However, there was an incomplete report for most items in the abstract considering PRISMA-A checklist. CONCLUSION: In general, the included SRMAs presented a (a) low prevalence of spin (except for adverse events in the abstract); (b) adequate completeness of reporting in the full text (except for prospective register); and (c) incomplete report for most items in the abstracts.