ABSTRACT
The Fukushima Daiichi Nuclear Power Plant accident released considerable radionuclides into the environment. Radioactive particles, composed mainly of SiO2, emerged as distinctive features, revealing insights into the accident's dynamics. While studies extensively focused on high-volatile radionuclides like Cs, investigations into low-volatile nuclides such as 90Sr and Pu remain limited. Understanding their abundance in radioactive particles is crucial for deciphering the accident's details, including reactor temperatures and injection processes. Here, we aimed to determine 90Sr and Pu amounts in radioactive particles and provide essential data for understanding the formation processes and conditions within the reactor during the accident. We employed radiochemical analysis on nine radioactive particles and determined the amounts of 90Sr and Pu in these particles. 90Sr and Pu quantification in radioactive particles showed that the 90Sr/137Cs radioactivity ratio (corrected to March 11, 2011) aligned with core temperature expectations. However, the 239+240Pu/137Cs activity ratio indicated nonvolatile Pu introduction, possibly through fuel fragments. Analyzing 90Sr and Pu enhances our understanding of the Fukushima Daiichi accident. Deviations in 239+240Pu/137Cs activity ratios underscore nonvolatile processes, emphasizing the accident's complexity. Future research should expand this data set for a more comprehensive understanding of the accident's nuances.
ABSTRACT
Cesium-bearing microparticles (Cs-BMPs) can reach the human respiratory system after inhalation, resulting in chronic local internal exposure. We previously investigated the spatial distribution of DNA damage induced in areas around a Cs-BMP; however, the biological impacts have not been fully clarified due to the limited amount of data. Here, we investigated the inflammatory signaling and DNA damage responses after local exposure to a Cs-BMP in vitro. We used two normal human lung cell lines, i.e., lung fibroblast cells (WI-38) and bronchial epithelial cells (HBEC3-KT). After 24 h exposure to a Cs-BMP, inflammation was evaluated by immunofluorescent staining for nuclear factor κB (NF-κB) p65 and cyclooxygenase 2 (COX-2). The number of DNA double-strand breaks (DSBs) was also detected by means of phospholylated histone H2AX (γ-H2AX) focus formation assay. Cs-BMP exposure significantly increased NF-κB p65 and COX-2 expressions, which were related to the number of γ-H2AX foci in the cell nuclei. Compared to the uniform (external) exposure to 137Cs γ-rays, NF-κB tended to be more activated in the cells proximal to the Cs-BMP, while both NF-κB p65 and COX-2 were significantly activated in the distal cells. Experiments with chemical inhibitors for NF-κB p65 and COX-2 suggested the involvement of such inflammatory responses both in the reduced radiosensitivity of the cells proximal to Cs-BMP and the enhanced radiosensitivity of the cells distal from Cs-BMP. The data show that local exposure to Cs-BMP leads to biological effects modified by the NF-κB pathway, suggesting that the radiation risk for Cs-BMP exposure can differ from that estimated based on conventional uniform exposure to normal tissues.
ABSTRACT
The structural form and elemental distribution of material originating from different Fukushima Daiichi Nuclear Power Plant reactors (Units 1 and 3) is hereby examined to elucidate their contrasting release dynamics and the current in-reactor conditions to influence future decommissioning challenges. Complimentary computed X-ray absorption tomography and X-ray fluorescence data show that the two suites of Si-based material sourced from the different reactor Units have contrasting internal structure and compositional distribution. The known event and condition chronology correlate with the observed internal and external structures of the particulates examined, which suggest that Unit 1 ejecta material sustained a greater degree of melting than that likely derived from reactor Unit 3. In particular, we attribute the near-spherical shape of Unit 1 ejecta and their internal voids to there being sufficient time for surface tension to round these objects before the hot (and so relatively low viscosity) silicate melt cooled to form glass. In contrast, a more complex internal form associated with the sub-mm particulates invoked to originate from Unit 3 suggest a lower peak temperature, over a longer duration. Using volcanic analogues, we consider the structural form of this material and how it relates to its environmental particulate stability and the bulk removal of residual materials from the damaged reactors. We conclude that the brittle and angular Unit 3 particulate are more susceptible to further fragmentation and particulate generation hazard than the round, higher-strength, more homogenous Unit 1 material.
ABSTRACT
The 2011 accident at Japan's Fukushima Daiichi Nuclear Power Plant released a considerable inventory of radioactive material into the local and global environments. While the vast majority of this contamination was in the form of gaseous and aerosol species, of which a large component was distributed out over the neighbouring Pacific Ocean (where it was subsequently deposited), a substantial portion of the radioactive release was in particulate form and was deposited across Fukushima Prefecture. To provide an underpinning understanding of the dynamics of this catastrophic accident, alongside assisting in the off-site remediation and eventual reactor decommissioning activities, the 'International Particle Analysis Database', or 'IPAD', was established to serve as an interactive repository for the continually expanding analysis dataset of the sub-mm ejecta particulate. In addition to a fully interrogatable database of analysis results for registered users (exploiting multiple search methods), the database also comprises an open-access front-end for members of the public to engage with the multi-national analysis activities by exploring a streamlined version of the data.
Subject(s)
Fukushima Nuclear Accident , Radioactive Pollutants/analysis , Japan , Pacific OceanABSTRACT
Both the three-dimensional internal structure and elemental distribution of near-field radioactive fallout particulate material released during the March 2011 accident at the Fukushima Daiichi Nuclear Power Plant is analysed using combined high-resolution laboratory and synchrotron radiation x-ray techniques. Results from this study allow for the proposition of the likely formation mechanism of the particles, as well as the potential risks associated with their existence in the environment, and the likely implications for future planned reactor decommissioning. A suite of particles is analyzed from a locality 2 km from the north-western perimeter of the site - north of the primary contaminant plume in an area formerly attributed to being contaminated by fallout from reactor Unit 1. The particles are shown to exhibit significant structural similarities; being amorphous with a textured exterior, and containing inclusions of contrasting compositions, as well as an extensive internal void volume - bimodal in its size distribution. A heterogeneous distribution of the various elemental constituents is observed inside a representative particle, which also exhibited a Fukushima-derived radiocesium (134Cs, 135Cs and 137Cs) signature with negligible natural Cs. We consider the structure and composition of the particle to suggest it formed from materials associated with the reactor Unit 1 building explosion, with debris fragments embedded into the particles surface. Such a high void ratio, comparable to geological pumice, suggests such material formed during a rapid depressurisation and is potentially susceptible to fragmentation through attrition.
Subject(s)
Cesium Radioisotopes/chemistry , Radioactive Fallout/analysis , Dust/analysis , Fukushima Nuclear Accident , Japan , Nuclear Power Plants , Radiation Monitoring/methods , Radiography/methods , Soil Pollutants, Radioactive , Synchrotrons , Water Pollutants, Radioactive/analysis , X-RaysABSTRACT
Radioactive particles were released into the environment during the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) accident. Many studies have been conducted to elucidate the chemical composition of released radioactive particles in order to understand their formation process. However, whether radioactive particles contain nuclear fuel radionuclides remains to be investigated. Here, we report the first determination of Pu isotopes in radioactive particles. To determine the Pu isotopes (239Pu, 240Pu and 241Pu) in radioactive particles derived from the FDNPP accident which were free from the influence of global fallout, radiochemical analysis and inductively coupled plasma-mass spectrometry measurements were conducted. Radioactive particles derived from unit 1 and unit 2 or 3 were analyzed. For the radioactive particles derived from unit 1, activities of 239+240Pu and 241Pu were (1.70-7.06) × 10-5 Bq and (4.10-8.10) × 10-3 Bq, respectively and atom ratios of 240Pu/239Pu and 241Pu/239Pu were 0.330-0.415 and 0.162-0.178, respectively. These ratios were consistent with the simulation results from ORIGEN code and measurements from various environmental samples. In contrast, Pu was not detected in the radioactive particles derived from unit 2 or 3. The difference in Pu contents is clear evidence towards different formation processes of radioactive particles, and detailed formation processes can be investigated from Pu analysis.
ABSTRACT
Insoluble radioactive microparticles emitted by the incident at the Fukushima nuclear power plant have drawn keen interests from the viewpoint of radiation protection. Cs-bearing particles have been assumed to adhere in the long term to trachea after aspirated into respiratory system, leading to heterogeneous dose distribution within healthy tissue around the particles. However, the biological effects posed by an insoluble radioactive particle remain unclear. Here, we show cumulative DNA damage in normal human lung cells proximal and distal to the particle (ß-ray and γ-ray-dominant areas, respectively) under localized chronic exposure in comparison with uniform exposure. We put a Cs-bearing particle into a microcapillary tip and placed it onto a glass-base dish containing fibroblast or epithelial cells cultured in vitro. A Monte Carlo simulation with PHITS code provides the radial distribution of absorbed dose-rate around the particle, and subsequently we observed a significant change in nuclear γ-H2AX foci after 24 h or 48 h exposure to the particle. The nuclear foci in the cells distal to the particle increased even under low-dose-rate exposure compared with uniform exposure to 137Cs γ-rays, which was suppressed by a treatment with a scavenger of reactive oxygen species. In contrast, such focus formation was less manifested in the exposed cells proximal to the particle compared with uniform exposure. These data suggest that the localized exposure to a Cs-bearing particle leads to not only disadvantage to distal cells but also advantage to proximal cells. This study is the first to provide quantitative evaluation for the spatial distribution of DNA double strand breaks after the heterogeneous chronic exposure to a Cs-bearing particle in comparison with uniform Cs exposure.
Subject(s)
Cesium Radioisotopes/toxicity , DNA Breaks, Double-Stranded , DNA Damage , DNA/radiation effects , Epithelial Cells/radiation effects , Fibroblasts/radiation effects , Beta Particles/adverse effects , Bronchi/cytology , Cell Line , Cell Line, Transformed , Dose-Response Relationship, Radiation , Epithelial Cells/chemistry , Fibroblasts/chemistry , Free Radical Scavengers , Fukushima Nuclear Accident , Gamma Rays/adverse effects , Gene Expression Regulation/radiation effects , Histones/biosynthesis , Histones/genetics , Humans , Lung/cytology , Particle Size , Reactive Oxygen Species , SolubilityABSTRACT
Here we report the results of multiple analytical techniques on sub-mm particulate material derived from Unit 1 of the Fukushima Daiichi Nuclear Power Plant to provide a better understanding of the events that occurred and the environmental legacy. Through combined x-ray fluorescence and absorption contrast micro-focused x-ray tomography, entrapped U particulate are observed to exist around the exterior circumference of the highly porous Si-based particle. Further synchrotron radiation analysis of a number of these entrapped particles shows them to exist as UO2-identical to reactor fuel, with confirmation of their nuclear origin shown via mass spectrometry analysis. While unlikely to represent an environmental or health hazard, such assertions would likely change should break-up of the Si-containing bulk particle occur. However, more important to the long-term decommissioning of the reactors at the FDNPP (and environmental clean-upon), is the knowledge that core integrity of reactor Unit 1 was compromised with nuclear material existing outside of the reactors primary containment.
ABSTRACT
Scientists face challenge in identifying the radioactive materials which are found as dotted images on various imaging plate (IP) autoradiographic photos of radioactively contaminated materials by the Fukushima Dai-ichi Nuclear Power Plant (F1NPP, or FDNPP) accident, such as air filter, fugitive dust, surface soil, agricultural materials, and water-shed samples. It has been revealed that they are minute particles with distinct morphology and elemental composition with high specific radioactivity, and different from those of the so-called Chernobyl hot particles. Basically, they are glassy particles once molten, composed of Si, O, Fe, Zn etc. with highly concentrated radiocaesium, which can be called as radiocaesium-bearing microparticles (CsMP). At present, CsMP can be classified into two types, Types-A and -B, which are characterized by different specific radioactivity, 134Cs/137Cs ratio, size and morphology, and geographic distribution around F1NPP. Such studies on the CsMP from various aspects have provided valuable information about what happened in the nuclear reactors during the F1NPP accident and fates of the CsMP in the environment. This review first provides a retrospective view on the research history of the CsMP, which is helpful to understand the unique character of the CsMP. Subsequently, more details about the current understanding of the natures of these hot particles, such as origin, morphology, chemical compositions, thermal properties, water-solubility, and secondary migration of CsMP in river and ocean systems are described with future prospects.
Subject(s)
Cesium Radioisotopes/analysis , Radiation Monitoring , Radioactive Fallout/analysis , Soil Pollutants, Radioactive/analysis , Water Pollutants, Radioactive/analysis , Fukushima Nuclear Accident , Japan , Nuclear Power PlantsABSTRACT
The Fukushima Daiichi Nuclear Power Plant (FDNPP) accident released abundant radioactive particles into the surrounding environment. Herein, we analyzed the activity of 90Sr in these particles to estimate the contribution of this radionuclide to the overall radiation exposure and shed light on the processes that occurred during the accident. Seven radioactive particles were isolated from the dust and soil samples collected from areas surrounding the FDNPP, and the minimum/maximum 137Cs activities were determined as 224/4,100 Bq. Based on the size, specific activity, and 134Cs/137Cs activity ratios, we concluded that six of the seven radioactive particles were released from the Unit 1 reactor, while one particle was released from the Unit 3 reactor by a hydrogen explosion. Strontium-90 was detected in all radioactive particles, and the minimal/maximal 90Sr activities were determined as 0.046/1.4 Bq. 137Cs/90Sr activity ratios above 1000 were observed for all seven particles, that is, compared to 137Cs, 90Sr had negligible contribution to the overall radiation exposure. The 137Cs/90Sr activity ratios of the radioactive particles were similar to those of terrestrial environmental samples and were higher for particles released from the Unit 1 reactor than for samples collected from the Unit 1 reactor building, which indicates possibility of additional 90Sr-rich contamination after release of the particles.
Subject(s)
Fukushima Nuclear Accident , Radiation Monitoring , Radioactive Fallout , Soil Pollutants, Radioactive , Cesium Radioisotopes , Dust , Japan , Nuclear Power PlantsABSTRACT
The characterization of radionuclides in Fukushima is important to determine their origins and current state in the environment. Radionuclides exist as fine particles and are mixed with other constituents. A measurement method with both micro-imaging capability and highly selective element detection is necessary to analyze these particles. We developed such an imaging technique using a time-of-flight secondary ion mass spectrometry and wavelength-tunable Ti:Sapphire lasers for the resonance ionization of target elements without mass interference. This is called resonant laser ionization sputtered neutral mass spectrometry. The instrument has a high lateral resolution and a higher ionization selectivity using two-step resonance excitation of Cs with two lasers at different wavelengths. Optimization of the wavelength for resonance ionization using a Cs compound was performed, and a real environmental particle containing radioactive Cs was analyzed. Isotope images of three kinds of Cs were successfully obtained without interfere from Ba isotopes for the first time.
ABSTRACT
A size-resolved, one-dimensional resuspension scheme for soil particles from the ground surface is proposed to evaluate the concentration of radioactivity in the atmosphere due to the secondary emission of radioactive material. The particle size distributions of radioactive particles at a sampling point were measured and compared with the results evaluated by the scheme using four different soil textures: sand, loamy sand, sandy loam, and silty loam. For sandy loam and silty loam, the results were in good agreement with the size-resolved atmospheric radioactivity concentrations observed at a school ground in Tsushima District, Namie Town, Fukushima, which was heavily contaminated after the Fukushima Dai-ichi Nuclear Power Plant accident in March 2011. Though various assumptions were incorporated into both the scheme and evaluation conditions, this study shows that the proposed scheme can be applied to evaluate secondary emissions caused by aeolian resuspension of radioactive materials associated with mineral dust particles from the ground surface. The results underscore the importance of taking soil texture into account when evaluating the concentrations of resuspended, size-resolved atmospheric radioactivity.
Subject(s)
Cesium Radioisotopes/analysis , Fukushima Nuclear Accident , Models, Theoretical , Soil Pollutants, Radioactive/analysis , Soil/chemistry , Dust , Japan , Minerals , Particle Size , Radiation MonitoringABSTRACT
To evaluate the deposition density and extent of subsurface infiltration of (129)I and (137)Cs in the restricted area that was highly contaminated by the accident of Fukushima Dai-ichi Nuclear Power Plant, cumulative inventories of (129)I and (137)Cs, concentrations of (129)I and (137)Cs, and (129)I/(137)Cs ratio in 30-cm-long soil columns were compared with pre-accident levels from the same area. The cores were collected before and after the accident from locations of S-1 (4 km west of FDNPP) and S-2 (8 km west of FDNPP). Deposition densities of (129)I and (137)Cs in the soil following the accident were 0.90-2.33 Bq m(-2) and 0.80-4.04 MBq m(-2), respectively, which were 14-39 and 320-510 times larger than the pre-accident levels of (129)I (59.3-63.3 mBq m(-2)) and (137)Cs (2.51-7.88 kBq m(-2)), respectively. Approximately 90% of accident-derived (129)I and (137)Cs deposited in the 30-cm soil cores was concentrated in the surface layer from 0 to 44-95 kg m(-2) of mass depth (0-4.3-6.2 cm depth) and from 0 to 16-25 kg m(-2) of mass depth (0-1.0-3.1 cm depth), respectively. The relaxation mass depths (h0) of 10.8-11.2 kg m(-2) for (129)I estimated in the previous study were larger than those of 8.1-10.6 kg m(-2) for (137)Cs at both sites, owing to the larger infiltration depth of radioiodine mainly by the gravitational water penetration in the surface soil in our study sites. Approximately 7-9% of the accident-derived (129)I was present in the lower layer from 44 to 100 kg m(-2) (4.3-8.6 cm depth) at S-1, and from 95 to 160 kg m(-2) (6.2-10.2 cm depth) at S-2. Approximately 1% of (137)Cs seems to infiltrate deeper than (129)I in the lower layer at each site in contrast to the surface layer.
Subject(s)
Cesium Radioisotopes/analysis , Fukushima Nuclear Accident , Iodine Radioisotopes/analysis , Radiation Monitoring , Soil Pollutants, Radioactive/analysis , Japan , Nuclear Power Plants , SeasonsABSTRACT
A tremendous amount of radioactivity was discharged because of the damage to cooling systems of nuclear reactors in the Fukushima No. 1 nuclear power plant in March 2011. Fukushima and its adjacent prefectures were contaminated with fission products from the accident. Here, we show a geographical distribution of radioactive iodine, tellurium, and cesium in the surface soils of central-east Japan as determined by gamma-ray spectrometry. Especially in Fukushima prefecture, contaminated area spreads around Iitate and Naka-Dori for all the radionuclides we measured. Distributions of the radionuclides were affected by the physical state of each nuclide as well as geographical features. Considering meteorological conditions, it is concluded that the radioactive material transported on March 15 was the major contributor to contamination in Fukushima prefecture, whereas the radioactive material transported on March 21 was the major source in Ibaraki, Tochigi, Saitama, and Chiba prefectures and in Tokyo.