ABSTRACT
Cryopreservation is a critical procedure in autologous hematopoietic stem cell transplantation. Dimethyl sulfoxide (DMSO) is the cryoprotectant of choice. Optimization of the cryopreservation protocol in the past revealed a dramatic loss of cell viability associated with a reduction of the DMSO concentration below 2 vol % in the freezing medium. The cryoprotective mechanism of DMSO is usually ascribed to the ability to suppress ice formation and reduce the adverse effects of the freeze-concentrated solution. This work proposes an alternative hypothesis considering the detrimental impact of NaCl eutectic crystallization on cell viability. Thermoanalytical and microstructural analysis of the DMSO effect on eutectic phase transformation of cryoprotective mixtures revealed a correlation between the loss of cell viability and eutectic NaCl crystallization. DMSO inhibits the eutectic crystallization of NaCl and preserves cell viability. Thermodynamic description of the inhibitory action and possible mechanism of cryoinjury are provided.
Subject(s)
Dimethyl SulfoxideABSTRACT
Precision analysis of the key biological metabolites such as L-lactate has great practical importance for many technological processes in food technology, including beverage production. Here we describe a new, highly selective, and sensitive biosensor for accurate L-lactate assay based on a combination of peroxidase-mimetic nanozymes with microbial lactate oxidase (LOx) immobilized onto the surface of a graphite-rod electrode (GE). The peroxidase-like nanozymes were synthesized using the debris of carbon microfibers (CFs) functionalized with hemin (H) and modified with gold nanoparticles (AuNPs) or platinum microparticles (PtMPs). The nanozyme formed with PtMPs as well as corresponding bioelectrodes based on it (LOx-CF-H-PtMPs/GE) is characterized by preferable catalytic and operational characteristics, so it was selected for the analysis of L-lactate content in real samples of grape must and red wine. The results of the L-lactate analysis obtained by the developed biosensors are highly correlated with a very selective spectrophotometric approach used as a reference. The developed biosensor, due to its high selectivity and sensitivity, is very prospective not only for the beverage industry and food technology, but also for clinical diagnostics and medicine, as well as in other applications where the accurate analysis of L-lactate is highly important.
Subject(s)
Biosensing Techniques , Graphite , Metal Nanoparticles , Lactic Acid/analysis , Peroxidase , Gold/analysis , Prospective Studies , Enzymes, Immobilized/metabolism , Biosensing Techniques/methods , Platinum , Beverages/analysisABSTRACT
The investigated polymeric matrixes consisted of epoxidized linseed oil (ELO), acrylated epoxidized soybean oil (AESO), trimethylolpropane triglycidyl ether (RD1), vanillin dimethacrylate (VDM), triarylsulfonium hexafluorophosphate salts (PI), and 2,2-dimethoxy-2-phenylacetophenone (DMPA). Linseed oil-based (ELO/PI, ELO/10RD1/PI) and soybean oil-based (AESO/VDM, AESO/VDM/DMPA) polymers were obtained by cationic and radical photopolymerization reactions, respectively. In order to improve the cross-linking density of the resulting polymers, 10 mol.% of RD1 was used as a reactive diluent in the cationic photopolymerization of ELO. In parallel, VDM was used as a plasticizer in AESO radical photopolymerization reactions. Positron annihilation lifetime spectroscopy (PALS) was used to characterize vegetable oil-based UV-cured polymers regarding their structural stability in a wide range of temperatures (120-320 K) and humidity. The polymers were used as laccase immobilization matrixes for the construction of amperometric biosensors. A direct dependence of the main operational parameters of the biosensors and microscopical characteristics of polymer matrixes (mostly on the size of free volumes and water content) was established. The biosensors are intended for the detection of trace water pollution with xenobiotics, carcinogenic substances with a very negative impact on human health. These findings will allow better predictions for novel polymers as immobilization matrixes for biosensing or biotechnology applications.
ABSTRACT
The search for new nanoscale materials with predictable properties to target the timely and fast detection of toxic components in wastewater is one of the most promising directions of modern biosensorics. We have shown that TiO2 nanoparticles modified with sulfur significantly improve the main operational parameters of laccase-based electrodes when compared with controls. The nanoparticle samples were labeled as TiO2S(0.75), TiO2S(1.5), and TiO2S(3.0), in which the numbers in parentheses refer to the quantity of H2SO4 (mL) used in the synthesis. The nanoparticles and enzyme were immobilized by means of Nafion film formed on a carbon rod electrode. It was shown that the modification of Nafion film by TiO2 or TiO2S(1.5) nanoparticles does not affect the size of the nanocavities and defect structure of the main polymer matrix as revealed by positron annihilation spectroscopy. It testifies that the structural-morphological difference between the film samples is rather small, and the improving of the sensor operational parameters for TiO2S(1.5)-based laccase electrodes is connected only with the impact of sulfur doping, but not the difference in membrane properties. The developed bioelectrodes were tested for phenol analysis in real communal wastewater samples spiked with these analytes, demonstrating the high accuracy of the assay.
Subject(s)
Biosensing Techniques , Nanoparticles , Biosensing Techniques/methods , Electrodes , Enzymes, Immobilized/chemistry , Laccase/chemistry , Sulfur , Titanium , WastewaterABSTRACT
The temperature dependence of free volume in dimethacrylates (poly2M), cured by direct irradiation (poly2M-A) or via a mask (poly2M-B), and in a thiol-based 2M sample (poly2M-co-EDDT), was investigated by positron annihilation lifetime spectroscopy (PALS) and dilatometry (DIL) to study the influence of thiol regulation on the microstructure via free volume characteristics. It was found that the free volume fraction as determined from experimental data by using the standard spherical approach for the hole shapes showed systematic differences from the analogous quantity as evaluated from the lattice-hole theory. Much better results were obtained for cylindrical holes, which expand 'anisotropically' in poly2M samples and 'isotropically' in the poly2M-co-EDDT resin. In addition, the hydrogen bond changes and the conversion of monomers in cured samples studied by near infra-red spectroscopy (NIR) revealed spectrum-structure correlations for the final cured thermosets.
Subject(s)
Electrons , Sulfhydryl Compounds , Spectrum Analysis/methods , TemperatureABSTRACT
In this work, the phase behavior of cryoprotective mixtures based on dimethyl sulfoxide (DMSO) mixed with a lipid bilayer consisting of dimyristoyl phosphatidylcholine (DMPC) was studied. This system represented a model of a biological cell and its membrane. The aim of the work was to clarify the origin of the cryoprotective action of low-concentrated mixtures (1-10 vol%) DMSO in water, representing mixtures used in cryopreservation in cell therapy. The combination of experimental techniques of differential scanning calorimetry (DSC) and positron annihilation lifetime spectroscopy (PALS) allowed a study of crystallization behavior of water confined in liposomes imitating the intracellular environment. The ability of liposomes to show the fundamental aspects of water phase behavior seen during freezing of biological cells was proved. The presence of an amorphous freeze-concentrated phase of DMSO in the frozen state was confirmed and its possible crystallization into the DMSO trihydrate and ice during thawing was demonstrated. Correlation between the critical temperature range for the loss of cell viability during slow thawing and the temperatures of freeze-concentrated phase crystallization was found. Based on this finding, possible mechanisms of DMSO cryoprotection are discussed with support brought by results for the studied model system. Quantification of the ice phase fraction in the frozen mixtures revealed that even low concentrations of DMSO can induce a considerable decrease in the amount of ice present.
ABSTRACT
Liver fibrosis is a major cause of morbidity and mortality worldwide due to chronic liver damage and leading to cirrhosis, liver cancer, and liver failure. To date, there is no effective and specific therapy for patients with hepatic fibrosis. As a result of their various advantages such as biocompatibility, imaging contrast ability, improved tissue penetration, and superparamagnetic properties, magnetic nanoparticles have a great potential for diagnosis and therapy in various liver diseases including fibrosis. In this review, we focus on the molecular mechanisms and important factors for hepatic fibrosis and on potential magnetic nanoparticles-based therapeutics. New strategies for the diagnosis of liver fibrosis are also discussed, with a summary of the challenges and perspectives in the translational application of magnetic nanoparticles from bench to bedside.
ABSTRACT
Development of artificial enzymes, including nanozymes as an alternative for non-stable and expensive natural enzymes, is a booming field of modern Biosensorics and Biofuel Technology. In this study, we describe fabrication and characterization of sensitive biosensors for the detection of ethanol and glucose based on new micro/nanocomposite electrodes with peroxidase-like activity (nanozyme) coupled with microbial oxidases: alcohol oxidase (AOX) and glucose oxidase (GOX). The nanozyme was synthesized by modification of carbon microfibers (CF) by hemin (H) and gold (Au) nanoparticles. The formation of gold nanoparticles on the surface of hemin-modified carbon microfibers has been confirmed by the UV-Vis and X-ray spectroscopy as well by the SEM analysis. Compared to hemin-only modified electrodes, the resulting micro/nanocomposite CF-H-Au electrodes exhibit a higher specific catalytic activity and a better affinity for H2O2 in solution. The H2O2-sensitive CF-H-Au-modified electrodes showed a higher sensitivity (1.3-2.6-fold) compared with the nearest carbon-derived analogs and were used for the construction of highly sensitive ethanol and glucose biosensors. To eliminate diffusion limitation for substrates, AOX or GOX were fixed on the CF-H-Au-modified electrodes using a highly porous Nafion membrane. The main biosensors' characteristics have been investigated. The developed biosensors were tested for ethanol and glucose analysis in the real samples of both grape must and wine. The results are in good agreement with the results obtained using enzymatic kits as reference approaches.
Subject(s)
Biosensing Techniques , Metal Nanoparticles , Nanocomposites , Electrodes , Enzymes, Immobilized , Ethanol , Glucose , Glucose Oxidase , Gold , Hydrogen Peroxide , Oxidoreductases , PeroxidasesABSTRACT
We report on the reorientation dynamics of small spin probe 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO) in cis-1,4-poly(isoprene) (cis-1,4-PIP10k) from electron spin resonance (ESR) and the free volume of cis-1,4-PIP10k from positron annihilation lifetime spectroscopy (PALS) in relation to the high-frequency relaxations of cis-1,4-PIP10k using light scattering (LS) as well as to the slow and fast processes from broadband dielectric spectroscopy (BDS) and neutron scattering (NS). The hyperfine coupling constant, 2Azz '(T), and the correlation times, τ c(T), of cis-1,4-PIP10k/TEMPO system as a function of temperature exhibit several regions of the distinct spin probe TEMPO dynamics over a wide temperature range from 100 K up to 350 K. The characteristic ESR temperatures of changes in the spin probe dynamics in cis-1,4-PIP10k/TEMPO system are closely related to the characteristic PALS ones reflecting changes in the free volume expansion from PALS measurement. Finally, the time scales of the slow and fast dynamics of TEMPO in cis-1,4-PIP10k are compared with all of the six known slow and fast relaxation modes from BDS, LS and NS techniques with the aim to discuss the controlling factors of the spin probe reorientation mobility in polymer, oligomer and small molecular organic glass-formers.
ABSTRACT
In this study, we describe the fabrication of sensitive biosensor for the detection of phenolic substrates using laccase immobilized onto two types of microporous carbon fibers (CFs). The main characteristics of microporous CFs used for preparation of biosensors are given. Two CFs were characterized by different specific surface area, CFA (<1 m2·g-1) and CFB (1448 m2·g-1), but with comparable size of the micropores estimated by positron annihilation lifetime spectroscopy. The structural analysis was shown that CFA is formed by thin interwoven fibers forming a highly porous structure, as well as CFB - by granular formations with uneven edges that shape a cellulose membrane of lower porosity. The results of amperometric analysis revealed that the laccase-bound CFs possesses better electrochemical behavior for laccase than non-modified rod carbon electrodes (control). Using chronoamperometric analysis, the operational parameters of the CFs-modified bioelectrodes were compared to control bioelectrodes. The bioelectrodes based on CFs have demonstrated 2.4-2.7 folds enhanced maximal current at substrate saturation (Imax) values, 1.2-1.4 folds increased sensitivity and twice wide linearity compared with control bioelectrodes. The sensitivity of the developed CFs-based bioelectrodes was improved compared with the laccase-bound electrodes, described in literature. The developed biosensor was tested for catechol analysis in the real communal wastewater sample.
Subject(s)
Biosensing Techniques , Carbon/chemistry , Catechols/analysis , Electrochemical Techniques , Fungal Proteins/chemistry , Laccase/chemistry , Polyporaceae/enzymology , Wastewater/analysisABSTRACT
A combined investigation of the spin probe TEMPO mobility and the free volume holes in n-propanol (n-PrOH) confined in a regular virgin MCM-41 matrix by means of ESR or PALS techniques, respectively, is reported. Dynamics of spin probe TEMPO alters at several characteristic ESR temperatures which are close to the characteristic PALS ones reflecting the changes in o-Ps annihilation and the related free volume. Correlations between these characteristic ESR and PALS temperatures indicate the common physical origins of the respective changes in the free volume expansion and the TEMPO mobility in the confined liquid n-PrOH. The significant difference in dynamic heterogeneity of TEMPO after confinement and free volume dispersion reflect the strongly altered structural-dynamic relationships in the confined n-PrOH medium with respect to the bulk situation.
ABSTRACT
A microstructural study of bisphenol-A diglycidyl ether (BADGE), prepared via both "classical" and novel photo- and thermally-induced cationic frontal polymerization, can help to understand the relationships between the microstructure of epoxides and their material properties, as well as the propagation of frontal polymerization waves. Microstructural PALS characteristics, such as the ortho-positronium lifetime (τ o-Ps), lifetime distribution, and void fraction, were investigated in relation to the extension of H bonds obtained from ATR/FTIR and the bulk density. The thermal profiles of differently-induced RICFP revealed that photo-triggered propagation is twice as fast as thermally-induced RICFP, with a comparable maximal reaction temperature (â¼283 °C) and heat conductivity. Both RICFP-based samples, induced by UV light and heat, showed a lower τ o-Ps, narrower lifetime distributions, and a reduced void fraction, in comparison to the "classical" cured anhydride-based epoxy sample. These may be the main factors which result in better material properties. In addition, both their radial and angular profiles of free volume fraction confirmed experimentally the rotational movement of the propagating frontal waves and their influence on the microstructural inhomogeneities, and the final material properties.
ABSTRACT
This work investigates the free-volume properties of the dimethyl sulfoxide (DMSO)-water mixtures by positron annihilation lifetime spectroscopy over a wide temperature range of 20-320 K. The processes of melting and solidification of the water, DMSO and the DMSO-water mixtures at 1.8, 2.0 and 10% vol. DMSO respectively were studied. It was found that the recrystallization during heating of the water-DMSO cryoprotective mixtures above 160 K at low DMSO concentrations is affected by the amount of DMSO in the mixture. The amount of amorphous phase formed during cooling influences the hysteresis between cooling and heating cycles which could be crucial for cell survival. Experiments also show the time dependence of crystallization which indicates that rapid heating can suppress this secondary crystallization which is undesirable during the cell thawing process. Similar concentrations of DMSO (1.8% and 2% vol. DMSO in water) where a 2% vol. DMSO mixture secures cell survival but 1.8 vol% does not, showed differences in structural and dynamic properties that are key factors in cell survival. These results were supported by differential scanning calorimetry and low frequency dielectric spectroscopy measurements. The obtained data are in strong agreement with the observed cryoprotective efficacy of the DMSO-water mixtures on living cells.
ABSTRACT
The presented work describes an effective method for 226Ra determination using laboratory- prepared MnO2-SiO2 composite resin. Samples were traced with 133Ba for radium radiochemical recoveries monitoring which were in the range of (77 - 100%). MnO2- SiO2 composite resin was used to collect for 226Ra from water samples (pH = 6.5-7.0). Radium was eluted from the column with 50â¯mL of 4â¯molâ¯L-1 HNO3 at a flow rate of 1.5â¯mLâ¯min-1. Alpha-spectrometric counting of Ba(Ra)SO4 microprecipitate was used for 226Ra determination. The new developed method was used to the 226Ra determination in samples of natural mineral, mountain spring, drinking and natural healing waters from Slovakia and Czech Republic.
ABSTRACT
The microstructural free volume evolution during a photopolymerization process was studied on a commercial photopolymer (SPOT LV) in situ by positron annihilation lifetime spectroscopy (PALS) and concomitant NIR-photorheology. Analysis of the positron lifetime spectra revealed a high sensitivity of the PALS technique to the different phases of photopolymerization associated with different reaction rates as well as to the evolution of microstructural free-volume shrinkage, which was described at the molecular level by the Kohlrausch-Williams-Watts equation. The in situ PALS study of microstructural changes in photopolymerization was related to the vitrification (gel point) accompanied by shrinkage stress registered via NIR-photorheology. The simultaneous NIR measurements yield information on the monomer conversion of SPOT LV, which can be correlated to the occurrence of the gel point and the evolution of the microstructural free volume. This combined study allows us to see deeper into the crosslinking process and its influence on the resulting material characteristics.
ABSTRACT
Slow positron beam and optical absorption measurements are carried out to study structural defects and positronium formation in 40 keV B(+)-implanted polymethylmethacrylate (B:PMMA) with ion doses from 6.25 × 10(14) to 5.0 × 10(16) ions/cm(2). Detailed depth-selective information on defects in implanted samples was obtained by measuring of Doppler broadening of positron annihilation γ rays as a function of incident positron energy and these experimental results were compared with SRIM (stopping and range of ions in matter) simulation results. Two general processes, appearance of free radicals at lower ion doses (<10(16) ions/cm(2)) and carbonization at higher ion doses (>10(16) ions/cm(2)), are considered from the Doppler S-E and W-E dependences in the framework of the concept of defects formation during radiation damage of polymer structure. Probabilities of ortho-positronium (o-Ps) formation are analyzed using S-W plot and slow positron annihilation lifetime measurements. Dose dependence of o-Ps lifetime τ3 and intensity I3 at the incident positron energy of 2.15 keV correlates well with the dose dependence of S-parameter and seems to account for the existence of the expected two processes, i.e., scission of polymer chains and appearance of free radicals preceding the aggregation of the clusters resulting in the formation of network of conjugated bonds at lower ion doses and carbonization at higher ion doses. The increase of optical absorption observed with increasing ion implantation dose also suggests a formation of carbonaceous phase in the ion-irradiated PMMA.