ABSTRACT
Transposon mutagenesis is a tool that is widely used for the identification of genes involved in the virulence of bacteria. Until now, transposon mutagenesis in Clostridium perfringens has been restricted to the use of Tn916-based methods with laboratory reference strains. This system yields primarily multiple transposon insertions in a single genome, thus compromising its use for the identification of virulence genes. The current study describes a new protocol for transposon mutagenesis in C. perfringens, which is based on the bacteriophage Mu transposition system. The protocol was successfully used to generate a single-insertion mutant library both for a laboratory strain and for a field isolate. Thus, it can be used as a tool in large-scale screening to identify virulence genes of C. perfringens.
Subject(s)
Bacteriophage mu/genetics , Clostridium perfringens/genetics , DNA, Bacterial/genetics , Electroporation/methods , Mutagenesis, Insertional/methods , Recombination, Genetic , Gene LibraryABSTRACT
AIMS: This paper describes optimization of electrotransformation of Mu transposition complexes into Lactococcus lactis cells and identification of genes affecting nisin production. METHODS AND RESULTS: The highest transformation efficiency, 1.1 x 10(2) transformants microg(-1) of input transposon DNA, was achieved when cells were grown to an OD(600) of 0.5 in the presence of 1.5% of glycine and treated with 20 microg ml(-1) ampicillin for 60 min. Three insertions affecting nisin production, which were identified at nisB, fhuR, and rpiA genes, were screened from a library of approximately 2000 erythromycin-resistant transformants using a nisin bioassay method. NisB is part of the nisin biosynthetic machinery, explaining the loss of nisin production in nisB mutant. FhuR is a transcription regulator involved in sulphur acquisition. Inactivation of fhuR presumably results in a low cellular cystein level, which affects nisin biosynthesis that involves utilization of cystein. RpiA is involved in pentose phosphate pathway and carbon fixation. The rpiA mutant showed reduction in nisin production and slow growth rate. CONCLUSIONS: The results showed that Mu transposition complex mutagenesis can be used to identify genes in L. lactis. Three genes involved in nisin production were identified. SIGNIFICANCE AND IMPACT OF THE STUDY: Expanding the Mu transposition-based mutagenesis to Lactococci adds a new tool for studies of industrially important bacteria.
Subject(s)
Lactococcus lactis/genetics , Mutagenesis, Insertional/methods , Nisin/biosynthesis , Nisin/genetics , Aldose-Ketose Isomerases , Ampicillin , Bacterial Proteins/genetics , Culture Media/chemistry , DNA Transposable Elements , Gene Expression Regulation, Bacterial , Genes, Bacterial , Glycine , Lactococcus lactis/metabolism , Membrane Proteins , Transcription FactorsABSTRACT
Gene targeting into mammalian genomes by means of homologous recombination is a powerful technique for analyzing gene function through generation of transgenic animals. Hundreds of mouse strains carrying targeted alleles have already been created and recent modifications of the technology, in particular generation of conditional alleles, have extended the usefulness of the methodology for a variety of special purposes. Even though the standard protocols, including the construction of gene-targeting vector plasmids, are relatively straightforward, they typically involve time-consuming and laborious gene mapping and/or sequencing steps. To produce various types of gene-targeting constructions rapidly and with minimum effort, we developed a strategy, that utilizes a highly efficient in vitro transposition reaction of phage Mu, and tested it in a targeting of the mouse Kcc2 gene locus. A vast number and different types of targeting constructions can be generated simultaneously with little or no prior sequence knowledge of the gene locus of interest. This quick and efficient general strategy will facilitate easy generation of null, potentially hypomorphic, and conditional alleles. Especially useful it will be in the cases when effects of several exons within a given gene are to be studied, a task that necessarily will involve generation of multiple constructions. The strategy extends the use of diverse recombination reactions for advanced genome engineering and complements existing recombination-based approaches for generation of gene-targeting constructions.
Subject(s)
Bacteriophage mu/genetics , Carrier Proteins/genetics , DNA Transposable Elements/genetics , Gene Targeting , Genetic Vectors , Symporters , Alleles , Animals , Blotting, Western , Carrier Proteins/physiology , Cells, Cultured , DNA Nucleotidyltransferases/genetics , DNA Primers/chemistry , Electroporation , Gene Expression Regulation , In Vitro Techniques , Mice , Mice, Inbred C57BL , Mice, Transgenic , Polymerase Chain Reaction , Recombination, Genetic , Restriction Mapping , K Cl- CotransportersABSTRACT
We present a detailed and quantitative analysis of the functional characteristics of the 1,000-nucleotide segment at the 5' end of the human immunodeficiency virus type 1 (HIV-1) RNA genome. This segment of the viral genome contains several important cis-acting sequences, including the TAR, polyadenylation, viral att site, minus-strand primer-binding site, and 5' splice donor sequences, as well as coding sequences for the matrix protein and the N-terminal half of the capsid protein. The genetic footprinting technique was used to determine quantitatively the abilities of 134 independent insertion mutations to (i) make stable viral RNA, (ii) assemble and release viral RNA-containing viral particles, and (iii) enter host cells, complete reverse transcription, enter the nuclei of host cells, and generate proviruses in the host genome by integration. All of the mutants were constructed and analyzed en masse, greatly decreasing the labor typically involved in mutagenesis studies. The results confirmed the presence of several previously known functional features in this region of the HIV genome and provided evidence for several novel features, including newly identified cis-acting sequences that appeared to contribute to (i) the formation of stable viral transcripts, (ii) viral RNA packaging, and (iii) an early step in viral replication. The results also pointed to an unanticipated trans-acting role for the N-terminal portion of matrix in the formation of stable viral RNA transcripts. Finally, in contrast to previous reports, the results of this study suggested that detrimental mutations in the matrix and capsid proteins principally interfered with viral assembly.
Subject(s)
Genome, Viral , HIV-1/genetics , Virus Replication , Cell Line, Transformed , DNA Footprinting/methods , Genomic Library , HIV-1/physiology , Humans , Mutagenesis, Insertional , RNA Stability , RNA, Viral , Transcription, Genetic , Tumor Cells, Cultured , Virus Assembly , Virus Integration , Virus Replication/geneticsABSTRACT
Retrotransposons are ubiquitous and major components of plant genomes, and are characteristically retroviral-like in their genomic structure and in the major proteins encoded. Nevertheless, few have been directly demonstrated to be transcribed or reverse transcribed. The BARE-1 retrotransposon family of barley (Hordeum vulgare) is highly prevalent, actively transcribed, and contains well conserved functional regions. Insertion sites for BARE-1 are highly polymorphic in the barley genome. Here we show that BARE-1 is translated and the capsid protein (GAG) and integrase (IN) components of the predicted polyprotein are processed into polypeptides of expected size. Some of the GAG sediments as virus-like particles together with IN and with BARE-1 cDNA. Reverse transcriptase activity is also present in gradient fractions containing BARE-1 translation products. Virus-like particles have also been visualized in fractions containing BARE-1 components. Thus BARE-1 components necessary for carrying out the life cycle of an active retrotransposon appear to be present in vivo, and to assemble. This would suggest that post-translational mechanisms may be at work to prevent rapid genome inflation through unrestricted integration.
ABSTRACT
Plant pathogenic Pseudomonas syringae strains harbour a type III secretion pathway suggested to be involved in the delivery of effector proteins from the bacteria into plant cells. During plant interaction, the bacteria apparently produce surface appendages, termed Hrp pili, that are indispensable for the secretion process. We have created an insertion mutation library, as well as deletion mutations to hrpA, the structural gene encoding Hrp pilin. Analysis of the mutants revealed gene regions important for hrpA expression, pilus assembly and pilus-dependent autoagglutination of the bacteria. The majority of insertions in the amino-terminal half of the pilin were tolerated without bacterial interaction with plants being affected, while the carboxy-terminus appeared to be needed for pilus assembly. Insertions in the 5' non-translated region and the first codons within the open reading frame affected mRNA production or stability and abolished protein production.
Subject(s)
Bacterial Proteins/genetics , Escherichia coli Proteins , Pseudomonas/genetics , RNA Helicases , 5' Untranslated Regions , Bacterial Proteins/biosynthesis , Base Sequence , DEAD-box RNA Helicases , DNA Mutational Analysis , DNA, Bacterial/analysis , Fimbriae Proteins , Fimbriae, Bacterial/genetics , Fimbriae, Bacterial/ultrastructure , Gene Deletion , Solanum lycopersicum/microbiology , Membrane Proteins/genetics , Molecular Sequence Data , Mutagenesis, Insertional , Phenotype , Pseudomonas/metabolism , RNA, Messenger/biosynthesisABSTRACT
Transposons are mobile genetic elements and have been utilized as essential tools in genetics over the years. Though highly useful, many of the current transposon-based applications suffer from various limitations, the most notable of which are: (i) transposition is performed in vivo, typically species specifically, and as a multistep process; (ii) accuracy and/or efficiency of the in vivo or in vitro transposition reaction is not optimal; (iii) a limited set of target sites is used. We describe here a genetic analysis methodology that is based on bacteriophage Mu DNA transposition and circumvents such limitations. The Mu transposon tool is composed of only a few components and utilizes a highly efficient and accurate in vitro DNA transposition reaction with a low stringency of target preference. The utility of the Mu system in functional genetic analysis is demonstrated using restriction analysis and genetic footprinting strategies. The Mu methodology is readily applicable in a variety of current and emerging transposon-based techniques and is expected to generate novel approaches to functional analysis of genes, genomes and proteins.
Subject(s)
DNA Transposable Elements/genetics , DNA/analysis , DNA/genetics , Genetic Techniques , Base Sequence , Escherichia coli , Gene Expression Regulation , Genome , Molecular Sequence Data , Proteins/analysis , Proteins/geneticsABSTRACT
A highly efficient DNA sequencing strategy was developed on the basis of the bacteriophage Mu in vitro DNA transposition reaction. In the reaction, an artificial transposon with a chloramphenicol acetyltransferase (cat) gene as a selectable marker integrated into the target plasmid DNA containing a 10.3-kb mouse genomic insert to be sequenced. Bacterial clones carrying plasmids with the transposon insertions in different positions were produced by transforming transposition reaction products into Escherichia coli cells that were then selected on appropriate selection plates. Plasmids from individual clones were isolated and used as templates for DNA sequencing, each with two primers specific for the transposon sequence but reading the sequence into opposite directions, thus creating a minicontig. By combining the information from overlapping minicontigs, the sequence of the entire 10,288-bp region of mouse genome including six exons of mouse Kcc2 gene was obtained. The results indicated that the described methodology is extremely well suited for DNA sequencing projects in which considerable sequence information is on demand. In addition, massive DNA sequencing projects, including those of full genomes, are expected to benefit substantially from the Mu strategy.
Subject(s)
Bacteriophage mu/genetics , Bacteriophage mu/metabolism , DNA Transposable Elements/genetics , Sequence Analysis, DNA/methods , Amino Acid Sequence , Molecular Sequence Data , Physical Chromosome MappingABSTRACT
Central to the Mu transpositional recombination are the two chemical steps; donor DNA cleavage and strand transfer. These reactions occur within the Mu transpososome that contains two Mu DNA end segments bound to a tetramer of MuA, the transposase. To investigate which MuA monomer catalyzes which chemical reaction, we made transpososomes containing wild-type and active site mutant MuA. By pre-loading the MuA variants onto Mu end DNA fragments of different length prior to transpososome assembly, we could track the catalysis by MuA bound to each Mu end segment. The donor DNA end that underwent the chemical reaction was identified. Both the donor DNA cleavage and strand transfer were catalyzed in trans by the MuA monomers bound to the partner Mu end. This arrangement explains why the transpososome assembly is a prerequisite for the chemical steps.
Subject(s)
Bacteriophage mu/genetics , DNA Nucleotidyltransferases/genetics , DNA, Viral/genetics , Recombination, Genetic/physiology , Amino Acid Sequence , Binding Sites/physiology , DNA/metabolism , DNA Damage/physiology , DNA Nucleotidyltransferases/metabolism , DNA-Binding Proteins/metabolism , Genetic Complementation Test , Molecular Sequence Data , TransposasesABSTRACT
A tetramer of the Mu transposase (MuA) pairs the recombination sites, cleaves the donor DNA, and joins these ends to a target DNA by strand transfer. Juxtaposition of the recombination sites is accomplished by the assembly of a stable synaptic complex of MuA protein and Mu DNA. This initial critical step is facilitated by the transient binding of the N-terminal domain of MuA to an enhancer DNA element within the Mu genome (called the internal activation sequence, IAS). Recently we solved the three-dimensional solution structure of the enhancer-binding domain of Mu phage transposase (residues 1-76, MuA76) and proposed a model for its interaction with the IAS element. Site-directed mutagenesis coupled with an in vitro transposition assay has been used to assess the validity of the model. We have identified five residues on the surface of MuA that are crucial for stable synaptic complex formation but dispensable for subsequent events in transposition. These mutations are located in the loop (wing) structure and recognition helix of the MuA76 domain of the transposase and do not seriously perturb the structure of the domain. Furthermore, in order to understand the dynamic behavior of the MuA76 domain prior to stable synaptic complex formation, we have measured heteronuclear 15N relaxation rates for the unbound MuA76 domain. In the DNA free state the backbone atoms of the helix-turn-helix motif are generally immobilized whereas the residues in the wing are highly flexible on the pico- to nanosecond time scale. Together these studies define the surface of MuA required for enhancement of transposition in vitro and suggest that a flexible loop in the MuA protein required for DNA recognition may become structurally ordered only upon DNA binding.
Subject(s)
Bacteriophage mu/enzymology , DNA Nucleotidyltransferases/chemistry , DNA Nucleotidyltransferases/metabolism , DNA, Viral/metabolism , Enhancer Elements, Genetic , Protein Structure, Secondary , Binding Sites , Computer Graphics , DNA, Viral/chemistry , DNA-Binding Proteins/chemistry , DNA-Binding Proteins/metabolism , Helix-Loop-Helix Motifs , Kinetics , Magnetic Resonance Spectroscopy , Mathematics , Models, Molecular , Mutagenesis, Site-Directed , Recombinant Proteins/chemistry , Recombinant Proteins/metabolism , Restriction Mapping , TransposasesABSTRACT
The two chemical steps of phage Mu transpositional recombination, donor DNA cleavage and strand transfer, take place within higher order protein-DNA complexes called transpososomes. At the core of these complexes is a tetramer of MuA (the transposase), bound to the two ends of the Mu genome. While transpososome assembly normally requires a number of cofactors, under certain conditions only MuA and a short DNA fragment are required. DNA requirements for this process, as well as the stability and activity of the ensuing complexes, were established. The divalent cation normally required for assembly of the stable complex could be omitted if the substrate was prenicked, if the flanking DNA was very short or if the two flanking strands were non-complementary. The presence of a single nucleotide beyond the Mu genome end on the non-cut strand was critical for transpososome stability. Donor cleavage additionally required at least two flanking nucleotides on the strand to be cleaved. The flanking DNA double helix was destabilized, implying distortion of the DNA near the active site. Although donor cleavage required Mg2+, strand transfer took place in the presence of Ca2+ as well, suggesting a conformational difference in the active site for the two chemical steps.
Subject(s)
Bacteriophage mu/genetics , DNA Transposable Elements/genetics , DNA, Viral/metabolism , DNA-Binding Proteins/metabolism , Nucleotidyltransferases/metabolism , Base Sequence , Calcium/metabolism , DNA, Viral/chemistry , Macromolecular Substances , Magnesium/metabolism , Molecular Sequence Data , Nucleic Acid Conformation , Recombination, Genetic/physiology , TransposasesABSTRACT
BACKGROUND: Mu transposase (MuA) is a multidomain protein encoded by the bacteriophage Mu genome. It is responsible for translocation of the Mu genome, which is the largest and most efficient transposon known. While the various domains of MuA have been delineated by means of biochemical methods, no data have been obtained to date relating to its tertiary structure. RESULTS: We have solved the three-dimensional solution structure of the DNA-binding domain (residues 1-76; MuA76) of MuA by multidimensional heteronuclear NMR spectroscopy. The structure consists of a three-membered alpha-helical bundle buttressed by a three-stranded antiparallel beta-sheet. Helices H1 and H2 and the seven-residue turn connecting them comprise a helix-turn-helix (HTH) motif. In addition, there is a long nine-residue flexible loop or wing connecting strands B2 and B3 of the sheet. NMR studies of MuA76 complexed with a consensus DNA site from the internal activation region of the Mu genome indicate that the wing and the second helix of the HTH motif are significantly perturbed upon DNA binding. CONCLUSIONS: While the general appearance of the DNA-binding domain of MuA76 is similar to that of other winged HTH proteins, the connectivity of the secondary structure elements is permuted. Hence, the fold of MuA76 represents a novel class of winged HTH DNA-binding domain.
Subject(s)
DNA-Binding Proteins/chemistry , Helix-Loop-Helix Motifs , Nucleotidyltransferases/chemistry , Bacteriophage mu/chemistry , Bacteriophage mu/genetics , Base Sequence , Binding Sites/genetics , DNA, Viral/genetics , DNA-Binding Proteins/genetics , Helix-Loop-Helix Motifs/genetics , Magnetic Resonance Spectroscopy , Models, Molecular , Molecular Sequence Data , Molecular Structure , Nucleotidyltransferases/genetics , Protein Structure, Secondary , Protein Structure, Tertiary , TransposasesABSTRACT
Escherichia coli bacteriophage PRD1 and its relatives contain linear double-stranded DNA genomes, the replication of which proceeds via a protein-primed mechanism. Characteristically, these molecules contain 5'-covalently bound terminal proteins and inverted terminal nucleotide sequences (inverted terminal repeats [ITRs]). The ITRs of each PRD1 phage species have evolved in parallel, suggesting communication between the molecule ends during the life cycle of these viruses. This process was studied by constructing chimeric PRD1 phage DNA molecules with dissimilar end sequences. These molecules were created by combining two closely related phage genomes (i) in vivo by homologous recombination and (ii) in vitro by ligation of appropriate DNA restriction fragments. The fate of the ITRs after propagation of single genomes was monitored by DNA sequence analysis. Recombinants created in vivo showed that phages with nonidentical genome termini are viable and relatively stable, and hybrid phages made in vitro verified this observation. However, genomes in which the dissimilar DNA termini had regained identical sequences were also detected. These observations are explained by a DNA replication model involving two not mutually exclusive pathways. The generality of this model in protein-primed DNA replication is discussed.
Subject(s)
Coliphages/physiology , DNA Replication , DNA, Viral/genetics , Escherichia coli/physiology , Genome, Viral , Repetitive Sequences, Nucleic Acid , Amino Acid Sequence , Base Sequence , Coliphages/genetics , Coliphages/metabolism , Conserved Sequence , DNA, Viral/isolation & purification , Escherichia coli/genetics , Escherichia coli/metabolism , Models, Genetic , Models, Structural , Molecular Sequence Data , Salmonella typhimurium/genetics , Sequence Homology, Nucleic AcidABSTRACT
A single tetramer of Mu transposase (MuA) pairs the recombination sites, cleaves the donor DNA, and joins these ends to a target DNA by strand transfer. Analysis of C-terminal deletion derivatives of MuA reveals that a 30 amino acid region between residues 575 and 605 is critical for these three steps. Although inactive on its own, a deletion protein lacking this region assembles with the wild-type protein. These mixed tetramers carry out donor cleavage but do not promote strand transfer, even when the donor cleavage stage is bypassed. These data suggest that the active center of the transposase is composed of the C-terminus of four MuA monomers; one dimer carries out donor cleavage while all four monomers contribute to strand transfer.
Subject(s)
Bacteriophage phi X 174/metabolism , Nucleotidyltransferases/chemistry , Nucleotidyltransferases/metabolism , DNA, Single-Stranded/metabolism , DNA, Viral/metabolism , Kinetics , Macromolecular Substances , Models, Structural , Nucleotidyltransferases/isolation & purification , Plasmids , Recombinant Proteins/chemistry , Recombinant Proteins/isolation & purification , Recombinant Proteins/metabolism , Sequence Deletion , TransposasesABSTRACT
Bacteriophage PRD1 replicates its DNA by means of a protein-primed replication mechanism. Compared to Mg2+, the use of Mn2+ as the metal activator of the phage DNA polymerase results in a great stimulation of the initiation reaction. The molecular basis of the observed stimulatory effect is an increase in the velocity of the reaction. The phage DNA polymerase is also able to catalyze the formation of the initiation complex in the absence of DNA template. Although the presence of Mn2+ does not affect either the polymerization activity or the processivity of the DNA polymerase, this metal is unable to activate the overall replication of the phage genome. This can be explained by a deleterious effect of Mn2+ on the 3'-5'-exonucleolytic and/or the strand-displacement activity, the latter being an intrinsic function of the viral DNA polymerase required for protein-primed DNA replication.
Subject(s)
Bacteriophages/genetics , DNA Replication/physiology , DNA, Viral/metabolism , DNA-Directed DNA Polymerase/metabolism , Metals/metabolism , Bacteriophages/enzymology , Base Sequence , Cations/metabolism , DNA, Single-Stranded/genetics , DNA, Single-Stranded/metabolism , DNA, Viral/genetics , Exonucleases/metabolism , Molecular Sequence Data , Oligodeoxyribonucleotides/genetics , Oligodeoxyribonucleotides/metabolism , Viral Proteins/genetics , Viral Proteins/metabolismABSTRACT
The bacteriophage PRD1 DNA polymerase gene (gene I) has been cloned into the expression vector pPLH101 under the control of the lambda pL promoter. Tailoring of an efficient ribosome binding site in front of the gene by polymerase chain reaction led to a high level heat-inducible expression of the corresponding gene product (P1) in Escherichia coli cells. Expression was confirmed in vivo by complementation of phage PRD1 DNA polymerase gene mutants and in vitro by formation of the genome terminal protein P8-dGMP replication initiation complex. Expressed PRD1 DNA polymerase was purified to apparent homogeneity in an active form. DNA polymerase, 3'-5'-exonuclease, and P8-dGMP replication initiation complex formation activities cosedimented in glycerol gradient with a protein of 65 kDa, the size expected for PRD1 DNA polymerase. The DNA polymerase was active on DNase I-activated calf thymus DNA, poly(dA).oligo(dT) and poly(dA-dT) primer/templates as well as on native phage PRD1 genome. The 3'-5'-exonuclease activity was specific for single-stranded DNA and released mononucleotides. No 5'-3'-exonuclease activity was detected. The inhibitor/activator spectrum of the PRD1 DNA polymerase was also studied. An in vitro replication system with purified components for bacteriophage PRD1 was established. Formation of the P8-dGMP replication initiation complex was a prerequisite for phage DNA replication, which proceeded from the initiation complex and yielded genome length replication products.
Subject(s)
Bacteriophages/enzymology , DNA-Directed DNA Polymerase/genetics , Bacteriophages/genetics , Base Sequence , Chromatography/methods , Cloning, Molecular , DNA Replication , DNA, Viral , DNA-Directed DNA Polymerase/isolation & purification , DNA-Directed DNA Polymerase/metabolism , Deoxyribonucleotides , Endonucleases/genetics , Endonucleases/metabolism , Genes, Viral , Genetic Complementation Test , Kinetics , Molecular Sequence Data , PlasmidsABSTRACT
Using electroporation with the phage PRD1 genome, we set up a high-frequency DNA transfer system for a linear dsDNA molecule with 5'-covalently linked terminal proteins. The transfer was saturated when more than 100 ng of PRD1 genome was used. Electroporation efficiency was about four orders of magnitude higher than that obtained with transfection. Removal of the terminal protein abolished plaque formation, which could not be rescued by supplying the terminal protein or phage DNA polymerase or both in trans.
Subject(s)
Bacteriophages/genetics , DNA, Recombinant , DNA, Viral/isolation & purification , Escherichia coli/genetics , Genetic Markers , Plasmids , TransfectionABSTRACT
The gene VIII coding for the bacteriophage PRD1 terminal protein P8 has been cloned under the control of the lambda pL promoter. The recombinant plasmid thus obtained (pUSH20) was able to complement a mutation in the phage terminal-protein gene VIII. High expression of the cloned gene from this plasmid could be obtained by raising the growth temperature from 28 to 42 degrees C. This heat induction resulted in an increased synthesis of a protein of 30 kDa, the size expected for the P8 protein. When complemented with an extract of cells carrying the PRD1 DNA polymerase gene, the extract from the cells harboring the plasmid pUSH20 was able to form the P8-dGMP replication initiation complex. The PRD1 replication initiation reaction was optimized and used to detect the biological activity of the expressed terminal protein. Subsequently, P8 protein was purified to almost homogeneity and shown to be biologically functional after the various purification steps.
Subject(s)
Bacteriophages/genetics , Escherichia coli/genetics , Genes, Viral , Viral Proteins/genetics , Viral Structural Proteins/genetics , Genetic Complementation Test , Genotype , Plasmids , Recombinant Proteins/isolation & purification , Restriction Mapping , Salmonella typhimurium/genetics , Viral Proteins/isolation & purificationABSTRACT
Bacteriophage PRD1 is the only protein-primed DNA replication system known to operate in Escherichia coli. The left-genome end of PRD1 contains the early genes for the terminal protein and the DNA polymerase. These genes have been sequenced and the proteins have been produced separately. In this investigation we completed the analysis of the PRD1 early DNA regions by cloning and sequencing the right end genome containing early genes XII and XIX. We compared the structure of the right- and left-terminal regions. The genome organization of both ends was found to be rather uniform. The inverted terminal repeats, the first promoters and the first translation start codons are located almost exactly at the same distance from the genome ends. The PRD1 early gene products, P12 and P19, do not share similarities with proteins found in other protein-primed replication systems.