ABSTRACT
Hydrogels find widespread applications in biomedicine because of their outstanding biocompatibility, biodegradability, and tunable material properties. Hydrogels can be chemically functionalized or reinforced to respond to physical or chemical stimulation, which opens up new possibilities in the emerging field of intelligent bioelectronics. Here, the state-of-the-art in functional hydrogel-based transistors and memristors is reviewed as potential artificial synapses. Within these systems, hydrogels can serve as semisolid dielectric electrolytes in transistors and as switching layers in memristors. These synaptic devices with volatile and non-volatile resistive switching show good adaptability to external stimuli for short-term and long-term synaptic memory effects, some of which are integrated into synaptic arrays as artificial neurons; although, there are discrepancies in switching performance and efficacy. By comparing different hydrogels and their respective properties, an outlook is provided on a new range of biocompatible, environment-friendly, and sustainable neuromorphic hardware. How potential energy-efficient information storage and processing can be achieved using artificial neural networks with brain-inspired architecture for neuromorphic computing is described. The development of hydrogel-based artificial synapses can significantly impact the fields of neuromorphic bionics, biometrics, and biosensing.
ABSTRACT
Correction for 'Flax fibre reinforced alginate poloxamer hydrogel: assessment of mechanical and 4D printing potential' by Charles de Kergariou et al., Soft Matter, 2024, 20, 4021-4034, https://doi.org/10.1039/D4SM00135D.
ABSTRACT
The mechanical and printing performance of a new biomaterial, flax fibre-reinforced alginate-poloxamer based hydrogel, for load-bearing and 4D printing biomedical applications is described in this study. The-self suspendable ability of the material was evaluated by optimising the printing parameters and conducting a collapse test. 1% of the flax fibre weight fraction was sufficient to obtain an optimum hydrogel composite from a mechanical perspective. The collapse test showed that the addition of flax fibres allowed a consistent print without support over longer distances (8 and 10 mm) than the unreinforced hydrogel. The addition of 1% of flax fibres increased the viscosity by 39% and 129% at strain rates of 1 rad s-1 and 5 rad s-1, respectively, compared to the unreinforced hydrogel. The distributions of fibre size and orientation inside the material were also evaluated to identify the internal morphology of the material. The difference of coefficients of moisture expansion between the printing direction (1.29 × 10-1) and the transverse direction (6.03 × 10-1) showed potential for hygromorphic actuation in 4D printing. The actuation authority was demonstrated by printing a [0°; 90°] stacking sequence and rosette-like structures, which were then actuated using humidity gradients. Adding fibres to the hydrogel improved the repeatability of the actuation, while lowering the actuation authority from 0.11 mm-1 to 0.08 mm-1. Overall, this study highlighted the structural and actuation-related benefits of adding flax fibres to hydrogels.
ABSTRACT
PU foams are versatile materials that find applications in a wide range of products, from upholstery to packaging and construction. These foams consist primarily of two components, polyol and prepolymer, and their concentrations play a crucial role in determining their physical and mechanical properties. A second-order mixture design approach is used in this work to identify the significant components and their contributions on the physical-mechanical properties of biodegradable castor oil-based foams. The experimental design includes three components: two types of polyols and one prepolymer. These components are varied in nine distinct conditions to evaluate their effects on properties such as expansion rate, bulk density, compressive strength, and tensile strength. The Scheffé's quadratic model coefficients exhibit R-squared values higher than 0.84 in most cases. Chemical analysis using infrared spectroscopy confirms the successful formation of the urethane bond during the manufacturing process. The biobased foams developed in this work have densities ranging between 61 and 100 kg m-3, compressive modulus of 11-15 MPa and compressive strength between 273 and 429 kPa. The tensile modulus varies between 3.2 and 4.9 MPa, with a tensile strength in the range of 370-500 kPa. These results highlight the potential of biodegradable castor oil-based foams as promising alternative materials to traditional synthetic foams.
ABSTRACT
Composite materials are used in a substantial number of products. Environmental concerns highlight the need for the inclusion of recovered waste in their formulation, thus reducing their carbon footprint. These solutions raise the need to confirm the mechanical characteristics of these materials, avoiding unwanted failures. In this work, the authors present an experimental study on the drilling effects on fibrous-particulate hybrid composites made of glass/carbon fabrics and three different micro-inclusions: silica particles, recycled carbon fibre powder and cement. The mechanical features of the plates are confirmed by thrust force monitoring during drilling and by flexural testing. The range of results confirm the mechanical outcomes due to machining. The plates with monolithic carbon fabric or with carbon fabric plies in the outer plies returned higher mechanical characteristics. The plates with micro-inclusions had enhanced the flexural strength by 23% and 10%, in 40% and 60% fabric plates, respectively. The results demonstrate that the use of alternative formulations with micro-inclusions from recovered waste can contribute both to the reduction of the mechanical degradation of drilled hybrid composites and to environmental purposes by avoiding the increase in landfill waste.
ABSTRACT
Acoustic metamaterials are increasingly being considered as a viable technology for sound insulation. Fractal patterns constitute a potentially groundbreaking architecture for acoustic metamaterials. We describe in this work the behaviour of the transmission loss of Hilbert fractal metamaterials used for sound control purposes. The transmission loss of 3D printed metamaterials with Hilbert fractal patterns related to configurations from the zeroth to the fourth order is investigated here using impedance tube tests and Finite Element models. We evaluate, in particular, the impact of the equivalent porosity and the relative size of the cavity of the fractal pattern versus the overall dimensions of the metamaterial unit. We also provide an analytical formulation that relates the acoustic cavity resonances in the fractal patterns and the frequencies associated with the maxima of the transmission losses, providing opportunities to tune the sound insulation properties through control of the fractal architecture.
ABSTRACT
Classical approaches to enhance auxeticity quite often involve exploring or designing newer architectures. In this work, simple geometrical features at the member level are engineered to exploit non-classical nonlinearities and improve the auxetic behaviour. The structural elements of the auxetic unit cell are here represented by thin strip-like beams, or thin-walled tubular beams. The resulting nonlinear stiffness enhances the auxeticity of the lattices, especially under large deformations. To quantify the influence of the proposed structural features on the resulting Poisson's ratio, we use here variational asymptotic method (VAM) and geometrically exact beam theory. The numerical examples reveal that 2D re-entrant type micro-structures made of thin strips exhibit an improvement in terms of auxetic behaviour under compression. For the auxetic unit cell with thin circular tubes as members, Brazier's effect associated with cross-sectional ovalisation improves the auxetic behaviour under tension; the enhancement is even more significant for the 3D re-entrant geometry. Thin strip-based auxetic unit cells were additively manufactured and tested under compression to verify the numerical observations. The experimentally measured values of the negative Poisson's ratio are in close agreement with the numerical results, revealing a 66% increase due to the nonlinearity. Simulation results showcase these alternative approaches to improve the auxetic behaviour through simple geometric engineering of the lattice ribs.
ABSTRACT
The appreciation of how conventional and fossil-based materials could be harmful to our planet is growing, especially when considering single-use and non-biodegradable plastics manufactured from fossil fuels. Accordingly, tackling climate change and plastic waste pollution entails a more responsible approach to sourcing raw materials and the adoption of less destructive end-of-life pathways. Livestock animals, in particular ruminants, process plant matter using a suite of mechanical, chemical and biological mechanisms through the act of digestion. The manure from these "living bioreactors" is ubiquitous and offers a largely untapped source of lignocellulosic biomass for the development of bio-based and biodegradable materials. In this review, we assess recent studies made into manure-based cellulose materials in terms of their material characteristics and implications for sustainability. Despite the surprisingly diverse body of research, it is apparent that progress towards the commercialisation of manure-derived cellulose materials is hindered by a lack of truly sustainable options and robust data to assess the performance against conventional materials alternatives. Nanocellulose, a natural biopolymer, has been successfully produced by living bioreactors and is presented as a candidate for future developments. Life cycle assessments from non-wood sources are however minimal, but there are some initial indications that manure-derived nanocellulose would offer environmental benefits over traditional wood-derived sources.
Subject(s)
Cellulose , Manure , Animals , Environmental Pollution , Plastics , BioreactorsABSTRACT
Electroadhesion has shown the potential to deliver versatile handling devices because of its simplicity of actuation and rapid response. Current electroadhesion systems have, however, significant difficulties in adapting to external objects with complex shapes. Here, a novel concept of metasurface is proposed by combining the use of natural fibers (flax) and shape memory epoxy polymers in a hygromorphic and thermally actuated composite (HyTemC). The biobased material composite can be used to manipulate adhesive surfaces with high precision and controlled environmental actuation. The HyTemC concept is preprogrammed to store controllable moisture and autonomous desorption when exposed to the operational environment, and can reach predesigned bending curvatures up to 31.9 m-1 for concave and 29.6 m-1 for convex shapes. The actuated adhesive surface shapes are generated via the architected metasurface structure, incorporating an electroadhesive component integrated with the programmable biobased materials. This biobased metasurface stimulated by the external environment provides a large taxonomy of shapesâfrom flat, circular, single/double concave, and wavy, to piecewise, polynomial, trigonometric, and airfoil configurations. The objects handled by the biobased metasurface can be fragile because of the high conformal matching between contacting surfaces and the absence of compressive adhesion. These natural fiber-based and environmentally friendly electroadhesive metasurfaces can significantly improve the design of programmable object handling technologies, and also provide a sustainable route to lower the carbon and emission footprint of smart structures and robotics.
ABSTRACT
Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.
Subject(s)
Ionic Liquids , Nanocomposites , Electrolytes/chemistry , Ionic Liquids/chemistry , Polymers/chemistry , Solvents/chemistryABSTRACT
This data article presents four experimental sets of results related to flax fibre composites with epoxy shape memory polymer matrix: water vapor absorption, mass diffusion immersed in water, hygroscopic expansion, mechanical properties. The water vapor absorption tests are described in raw data related to four types of laminates with weights measured at different relative humidity (0%, 9%, 33%, 44%,75%, 85% and 100%). The mass diffusion experiments are related to weights of immersed samples over time. The unidirectional composite hygroscopic expansion is also measured along the fibre longitude and transverse directions. The mechanical properties of flax composite at various temperatures (20°C, 40°C, 60°C, 80°C and 100°C) and humidity environments (50% and immersed) are also described. Load-displacement diagrams of the hygromorph composites are converted into stress-strain diagrams via a compliance calibration, from which the tensile moduli are extracted. The data presented in this article can provide a benchmark for the development of new models, or for the determination of other properties via post processing. The detailed interpretation of the data can be found in [1]. The data is available in the Mendeley Data repository at [2].
ABSTRACT
Removal of hazardous herbicides from the aqueous solution is critical for overcoming health-related issues across the wider population. In the current work, we have prepared sodium alginate (SAlg), dextrin, and acrylic acid (AA) based cross-linked hydrogels, composed of bentonite incorporated in the biocompatible hydrogel matrix. This hydrogel composite can remove highly toxic herbicide paraquat (PQ). As-synthesised hydrogel (SAlg/dextrin-cl-PAA) and hydrogel composite (SAlg/dextrin-cl-PAA/bentonite) were further analysed by infra-red spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA/DSC). For the first time, PQ adsorption onto sodium and dextrin-based hydrogel was also evaluated. The measured highest removal capacities were 76.923 and 90.909 mg g-1 for the SAlg/dextrin-cl-PAA and SAlg/dextrin-cl-PAA/bentonite, respectively. Pseudo-second-order (PSO) and Langmuir isotherm models have shown to be best suited for accurately describing the adsorption mechanism. A thermodynamics study verified that the adsorption of PQ on adsorbents is spontaneous, favourable and exothermic. Moreover, reusability analysis shows that the adsorbents possess good reproducibility even after six successive cycles. The adsorption results demonstrate that the synthesised adsorbents are very efficient for removing herbicides (PQ) from wastewater.
Subject(s)
Herbicides , Water Pollutants, Chemical , Acrylates , Adsorption , Alginates , Bentonite , Dextrins , Hydrogels , Hydrogen-Ion Concentration , Kinetics , Paraquat , Reproducibility of ResultsABSTRACT
Penta-graphene (PG) is a new theoretical two-dimensional metastable carbon allotrope composed entirely of carbon pentagons. In this paper, molecular dynamics simulations are performed to investigate the effects of the hydrogenation on the tensile and shear mechanical properties, together with the failure mechanism of PG with vacancy defects. The results show that hydrogenation can effectively tune the mechanical properties and failure mechanism of PG with vacancy defects. The defective PG (DPG) with low hydrogenation coverages exhibits obvious plastic deformation features under tensile and shear loading, and pentagon-to-polygon structural transformation is observed, while complete hydrogenation can change the failure mechanism of DPG from plastic deformation to brittle fracture. Both the tensile and shear moduli and elastic limit of DPG first decrease dramatically and then increase slowly with the increase of hydrogenation coverage, while tensile and shear strain increases almost monotonically with rising hydrogenation coverage. Complete hydrogenation can result in large enhancement of tensile and shear elastic stress limit and strain. These results may provide an important guideline for effectively tuning the mechanical properties of PG and other two-dimensional nanomaterials.
ABSTRACT
Penta-graphene is a new two-dimensional metastable carbon allotrope composed entirely of carbon pentagons with unique electronic and mechanical properties. In this work we evaluate the mechanical properties of new classes of defective penta-graphene (DPG) subjected to tensile and shear loading by using molecular dynamics simulations. The types of defects considered here are monovacancy at either 4-coordinated C1 site or 3-coordinated C2 site, and double vacancy (DV). We focus in particular on the effects of the different topologies of defects and their concentrations on the elastic constants and the nonlinear mechanics of this allotropic form of carbon. The results indicate that DPG has a plastic behavior similar to pristine penta-graphene, which is caused by the irreversible pentagon-to-polygon structural transformation occurring during tensile and shear loading. The tensile and shear moduli decrease linearly with the concentration of defects. Monotonic reductions of the tensile yield and shear stresses are also present but less pronounced, while the yield strains are unaffected. Penta-graphene with 4-coordinated and DVs feature a change of the Poisson's ratio from negative to positive when the defect concentration rises to about 3% and 6%. Temperature can trigger structural reconstruction for free-standing DPG. The critical transition temperature increases due to the vacancy defects and the defects can delay the structure transition. These findings are expected to provide important guidelines for the practical applications of penta-graphene based micro/nano electromechanical systems.
ABSTRACT
The extent to which biologic payloads can be effectively delivered to cells is a limiting factor in the development of new therapies. Limitations arise from the lack of pharmacokinetic stability of biologics in vivo. Encapsulating biologics in a protective delivery vector has the potential to improve delivery profile and enhance performance. Coacervate microdroplets are developed as cell-mimetic materials with established potential for the stabilization of biological molecules, such as proteins and nucleic acids. Here, the development of biodegradable coacervate microvectors (comprising synthetically modified amylose polymers) is presented, for the delivery of biologic payloads to cells. Amylose-based coacervate microdroplets are stable under physiological conditions (e.g., temperature and ionic strength), are noncytotoxic owing to their biopolymeric structure, spontaneously interacted with the cell membrane, and are able to deliver and release proteinaceous payloads beyond the plasma membrane. In particular, myoglobin, an oxygen storage and antioxidant protein, is successfully delivered into human mesenchymal stem cells (hMSCs) within 24 h. Furthermore, coacervate microvectors are implemented for the delivery of human bone morphogenetic protein 2 growth factor, inducing differentiation of hMSCs into osteoprogenitor cells. This study demonstrates the potential of coacervate microdroplets as delivery microvectors for biomedical research and the development of new therapies.
Subject(s)
Bone Morphogenetic Protein 2 , Cell Differentiation/drug effects , Drug Delivery Systems/methods , Mesenchymal Stem Cells/metabolism , Amylose/chemistry , Biopolymers/chemistry , Bone Morphogenetic Protein 2/chemistry , Bone Morphogenetic Protein 2/pharmacokinetics , Bone Morphogenetic Protein 2/pharmacology , Cells, Cultured , HumansABSTRACT
Cactus fibres have previously shown unusual mechanical properties in terms of bending and axial stiffness due to their hierarchical structural morphology. Bioinspiration from those cactus fibres could potentially generate architected materials with exciting properties. To that end we have built bioinspired artificial analogues of cactus fibres to evaluate their mechanical properties. We have generated 3D printed specimens from rendered models of the cactus structure using two different printing techniques to assess the reproducibility of the structural topology. Bioinspired additive manufactured materials with unusual mechanical properties constitute an ever-evolving field for applications ranging from novel wing designs to lightweight plant-inspired analogues. The cactus-inspired 3D printed specimens developed here demonstrate an unusually high bending to axial stiffness ratios regardless of the manufacturing method used. Moreover, when compared to their equivalent beam analogues the cactus specimens demonstrate a significant potential in terms of specific (weight averaged) flexural modulus. Imaging of the artificial cactus reinforcements has enabled the generation of a one-dimensional reduced order finite element model of the cactus structure, with a distribution of cross sections along the length that simulate the inertia and mechanical behaviour of the cactus topology. The novel bioinspired material structure shows an excellent reproducibility across different manufacturing methods and suggest that the tree-like topology of the cactus fibre could be very suited to applications where high bending to axial stiffness ratios are critical.
Subject(s)
Biomimetic Materials , Cactaceae , Printing, Three-Dimensional , Reproducibility of ResultsABSTRACT
Smart biomaterials with an inherent capacity to elicit specific behaviors in lieu of biological prompts would be advantageous for regenerative medicine applications. In this work, we employ an electrospinning technique to model the in vivo nanofibrous extracellular matrix (ECM) of cartilage using a chondroinductive cellulose and silk polymer blend (75:25 ratio). This natural polymer composite is directly electrospun for the first time, into nanofibers without post-spun treatment, using a trifluoroacetic acid and acetic acid cosolvent system. Biocompatibility of the composite nanofibres with human mesenchymal stem cells (hMSCs) is demonstrated and its inherent capacity to direct chondrogenic stem cell differentiation, in the absence of stimulating growth factors, is confirmed. This chondrogenic stimulation could be countered biochemically using fibroblast growth factor-2, a growth factor used to enhance the proliferation of hMSCs. Furthermore, the potential mechanisms driving this chondroinduction at the cell-biomaterial interface is investigated. Composite substrates are fabricated as two-dimensional film surfaces and cultured with hMSCs in the presence of chemicals that interfere with their biochemical and mechanical signaling pathways. Preventing substrate surface elasticity transmission resulted in a significant downregulation of chondrogenic gene expression. Interference with the classical chondrogenic Smad2/3 phosphorylation pathway did not impact chondrogenesis. The results highlight the importance of substrate mechanical elasticity on hMSCs chondroinduction and its independence to known chondrogenic biochemical pathways. The newly fabricated scaffolds provide the foundation for designing a robust, self-inductive, and cost-effective biomimetic biomaterial for cartilage tissue engineering.
ABSTRACT
The preparation of ultra-thin CFRP laminates, which incorporate a cycloaliphatic epoxy resin reinforced with polyhedral oligomeric silsesquioxane (POSS) reagent nanofiller, using out-of-autoclave procedure is reported. The influence of the amount of POSS within the laminate on the mechanical properties and surface roughness of the laminates is analysed before and after exposure to atomic oxygen (AO) to simulate the effects of low Earth orbit (LEO). The addition of 5 wt% POSS to the base epoxy leads to an increase in both flexural strength and modulus, but these values begin to fall as the POSS content rises, possibly due to issues with agglomeration. The addition of POSS offers improved resistance against AO degradation with the laminates containing 20 wt% POSS demonstrating the lowest erosion yield (1.67 × 10-24 cm2/atom) after the equivalent of a period of 12 months in a simulated LEO environment. Exposure to AO promotes the formation of a silicon-rich coating layer on the surface of the laminate, which in turn reduces roughness and increases stiffness, as evidenced by measurements of flexural properties and spectral data after exposure.
Subject(s)
Epoxy Resins/chemistry , Nanocomposites/chemistry , Oxygen/chemistry , Carbon Fiber/chemistry , Cyclization , Elastic Modulus , Organosilicon Compounds/chemistry , Plastics/chemistry , Spectrum Analysis , Surface PropertiesABSTRACT
The microwave properties of composites containing Fe-based ferromagnetic microwires and carbon fibres have been investigated as part of a campaign to bring added functionalities into structural composites. A transmission window observed in 1-6 GHz demonstrates double-negative (DNG), i.e., metamaterial characteristics in the composites containing short-cut carbon fibres and a parallel array of microwires; the metamaterial characteristic is due to the ferromagnetic resonance and a plasmonic behaviour, as short carbon fibres are proved to ameliorate DNG properties through enhancing the impedance of the composites. In parallel, magnetically tunable metamaterial features are realised in composites containing continuous carbon fibres and microwires, which can be switched on/off via rotating the electrical excitation direction. Such structural composites integrated with metamaterial features (termed as metacomposites) are potentially useful for active cloaking applications among others.
ABSTRACT
Origami in engineering is gaining interest for its potential as deployable or shape-adaptive structures. Practical systems could employ a network of actuators distributed across the structure to induce these deformations. Selecting the actuator locations requires an understanding of how the effect of a single actuator propagates spatially in an origami structure. We combine experimental results, finite element analysis, and reduced-order bar-and-hinge models to show how a localized static actuation decays elastically in Miura-ori tubes and sheets. We observe a strain reversal, before the origami structure springs back to the initial configuration further away from the point of actuation. The strain reversal is the result of bending of the facets, while the spring back requires in-plane facet deformations.