Posttraumatic Cubitus Varus: Respect the Columns.

Posttraumatic cubitus varus is a multiplanar deformity that results from an improperly reduced supracondylar humerus fracture. The prevention of posttraumatic cubitus varus hinges on the stable restoration of all 3 columns of the distal humerus while avoiding malrotation. The collapse of any column leads to varying degrees of deformity in the coronal, sagittal, and/or axial plane. The purpose of this article is to explain the pattern of the deformity and use this to summarize preventative tactics for avoiding its described sequelae. We also summarize, illustrate, and present case examples for the various osteotomies used to correct the deformity, and speculate future directions.

Risk Factors for Revision of External Fixation of Unstable Ankle Injuries.

INTRODUCTION: External fixation of unstable ankle injuries is commonly done by orthopaedic surgeons. An improper technique can negate the benefits of the procedure and necessitate revision. This study sought to determine the risk factors for revision of external fixation of unstable ankle injuries. METHODS: Retrospective cohort at a level I academic trauma center of 120 consecutive patients underwent external fixation of an unstable ankle injury. Exclusion criteria included external fixation for reason other than fracture, inadequate intraoperative imaging, skeletal immaturity, and follow-up less than 30 days. Primary outcome measurement was revision of external fixation within 30 days. RESULTS: Ninety-seven patients met inclusion criteria. Eighteen (18.6%) underwent revision within 30 days of whom 5 (28%, P < 0.001) had a poor reduction intraoperatively. No patients with a good reduction required revision. Revised patients had a significantly higher talar tilt (P < 0.001) and were more likely to lack a first metatarsal pin (P = 0.018). Multivariate analysis revealed talar tilt >0.5° (odds ratio, 22.62; 95% confidence interval, 6.52 to 50.63) as an independent risk factor for revision. DISCUSSION: For external fixation of unstable ankle injuries, poor reduction quality is a risk factor for need for revision surgery. Orthopaedic surgeons should be critical of their final intraoperative assessment to prevent revision.

The effect of body weight on interfragmentary fracture strain in plate fixation of distal femur fractures: A finite element analysis.

INTRODUCTION: Distal femur fractures are difficult to successfully treat due to high rates of nonunion. Obesity is an independent prognostic risk factor for nonunion. Advances in finite element analyses (FEAs) have allowed researchers to better understand the performance and behavior of constructs at the bone-implant interface under a variety of conditions. The purpose of this study is to determine the impact of body weight on fracture strain in a lateral locking plate construct for supracondylar femur fractures and whether additional construct rigidity is beneficial to optimize fracture strain in high body mass patients. HYPOTHESIS: We hypothesized that increased loads would produce a higher interfragmentary strain (IFS), which could be decreased by shortening the working length of the construct. MATERIALS AND METHODS: A 3D finite element analysis was performed on two separate femur models with a comminuted supracondylar distal femur fracture fixed with a lateral distal femoral locking plate in bridging mode with Ansys software. Axial forces were varied to recreate the effect of load from normal and high body mass patients. Working length and screw density of the construct were varied for each condition. Measurements of interfragmentary strain and shear motion (SM) were compared. RESULTS: Doubling the axial load from 70kg (control) to 140kg (high body mass) increased the interfragmentary strain by an average of 76% for the three working lengths (3.38%±1.67% to 4.37%±0.88% at the baseline working length (BWL), 1.42%±1.00% to 2.87%±2.02% at the intermediate working length (IWL) and 0.62%±0.22% to 1.22%±0.42% at the short working length (SWL)). On average, decreasing the working length in the 140kg load reduced the mean IFS to within 15% of the mean IFS of the 70kg load at the longer working length (2.87%±2.02% at IWL 140kg versus 3.38%±1.67% at BWL 70kg and 1.22%±0.45% SWL 140kg versus 1.42±1.00% IWL 70kg). DISCUSSION: Increased axial load increases interfragmentary strain in an AO/OTA 33A distal femur fracture fixed with a lateral distal femoral locking plate. Decreasing the working length of the fixation construct in the high body mass model decreased interfragmentary strain. Higher loading conditions reflective of high body mass patients should be considered in studies investigating optimization of fracture strain. LEVEL OF PROOF: V; Finite Element Analysis (FEA).

Are all Cages Created Equal? Analysis of Cervical Cage Malfunctions Using FDA MAUDE Database.

STUDY DESIGN: Retrospective case series. OBJECTIVE: To characterize failure rates of cervical cages based on manufacturer and design characteristics using the nationwide database of reported malfunctions. BACKGROUND: The Food and Drug Administration (FDA) aims to ensure the safety and efficacy of cervical interbody implants postimplantation; however, intraoperative malfunctions may be overlooked. MATERIALS AND METHODS: The FDA's Manufacturer and User Facility Device Experience database was queried for reports of cervical cage device malfunctions from 2012 to 2021. Each report was categorized based on the failure type, implant design, and manufacturer. Two market analyses were performed. First, "failure-to-market share indices" were generated by dividing the number of failures per year for each implant material by its yearly US market share in cervical spine fusion. Second, "failure-to-revenue indices" were calculated by dividing the total number of failures per year for each manufacturer by their approximate yearly revenue from spinal implants in the US. Outlier analysis was performed to generate a threshold value above which failure rates were defined as greater than the normal index. RESULTS: In total, 1336 entries were identified, and 1225 met the inclusion criteria. Of these, 354 (28.9%) were cage breakages, 54 (4.4%) were cage migrations, 321 (26.2%) were instrumentation-related failures, 301 (24.6%) were assembly failures, and 195 (15.9%) were screw failures. Poly-ether-ether-ketone implants had higher failure by market share indices for both migration and breakage compared with titanium. Upon manufacturer market analysis, Seaspine, Zimmer-Biomet, K2M, and LDR exceeded the failure threshold. CONCLUSION: The most common cause of implant malfunction was breakage. Poly-ether-ether-ketone cages were more likely to break and migrate compared with titanium ones. Many of these implant failures occurred intraoperatively during instrumentation, which underscores the need for FDA evaluation of these implants and their accompanying instrumentation under the appropriate loading conditions before commercial approval.

A novel surgical technique for distal radius fractures using the "mini distractor".

Open reduction and internal fixation of distal radius fractures is one of the most common operations for orthopaedic surgeons. A vital step of the operation is restoring radial height, which can be challenging if the surgeon is operating alone. To address this, we present a novel surgical technique called the distal radius mini distractor. The technique utilizes a compression / distraction device in tandem with a volar locking plate to aid in the reduction of impacted distal radius fractures. The written technique guide is presented alongside intra-operative surgical pictures and fluoroscopy. The objective of this article is to introduce the mini distractor technique, which can be of particular use for the surgeon operating without assistance.

Cross-cultural adaptation, reliability, and validity of the Russian version of the Spine Oncology Study Group Outcomes Questionnaire (SOSGOQ2.0).

OBJECTIVE: The most validated health-related quality-of-life (HRQOL) questionnaire specific to the metastatic spine cancer population is the Spine Oncology Study Group Outcomes Questionnaire version 2 (SOSGOQ2.0). The purpose of this study was to translate and validate a Russian version of the SOSGOQ2.0. METHODS: The SOSGOQ2.0 was translated into Russian and cross-culturally adapted. In this study, 64 eligible patients completed the SOSGOQ2.0_RUS along with the EQ-5D 5 Level, SF-36 quality-of-life questionnaires, and visual analog scale for pain assessment scale (VAS). Internal consistency was measured using Cronbach's alpha, in which a score of 0.65 or higher is acceptable. Test-retest reliability was evaluated by examining the intraclass correlation coefficient (ICC). RESULTS: Included in this study were 64 Russian-speaking patients (median age 59 years) with metastatic spine disease. The most common primary tumors were breast, kidney, and prostate cancers. The overall Cronbach's alpha was 0.87, indicating high internal consistency. The overall ICC for the SOSGOQ2.0_RUS was 0.88 (95% CI 0.81-0.93), indicating high reliability and consistency of the measure. The physical function, pain, and mental health domains of the SF-36 moderately correlated with the same domains of the SOSGOQ2.0_RUS, with correlation coefficients ranging from 0.65 to 0.71. CONCLUSIONS: The SOSGOQ2.0_RUS is a reliable and valid questionnaire for assessing the HRQOL in patients with metastatic spinal tumors. The questionnaire showed high internal consistency, test-retest reliability, and good construct validity when compared with other established questionnaires.

Spinolaminar locking plates improve fixation strength compared to pedicle screws: a biomechanical analysis.

INTRODUCTION: Pedicle screw loosening is a significant complication of posterior spinal fixation, particularly among osteoporotic patients and in deformity constructs. In orthopedic trauma surgery, locking plates and screws have revolutionized the fixation of osteoporotic fractures. We have combined the traumatology principle of fixed-angle locking plate fixation with the spine principles of segmental instrumentation. METHODS: A novel spinolaminar locking plate was designed based on morphometric studies of human thoracolumbar vertebrae. The plates were fixed to cadaveric human lumbar spines and connected to form 1-level L1-L2 or L4-L5 constructs and compared to similar pedicle screw constructs. Pure moment testing was performed to assess range of motion before and after 30,000 cycles of cyclic fatigue. Post-fatigue fixture pullout strength was assessed by applying a continuous axial tensile force oriented to the principal axis of the pedicle until pullout was observed. RESULTS: Spinolaminar plate fixation resulted in superior pullout strength compared to pedicle screws (1,065 ± 400N vs. 714 ± 284N, p = 0.028). Spinolaminar plates performed equivalently to pedicle screws in range of motion reduction during flexion/extension and axial rotation. Pedicle screws outperformed the spinolaminar plates in lateral bending. Finally, no spinolaminar constructs failed during cyclic fatigue testing, whereas one pedicle screw construct did. CONCLUSIONS: The spinolaminar locking plate maintained adequate fixation post-fatigue, particularly in flexion/extension and axial rotation compared to pedicle screws. Moreover, spinolaminar plates were superior to pedicle screw fixation with respect to cyclic fatiguing and pullout strength. The spinolaminar plates offer a viable option for posterior lumbar instrumentation in the adult spine.

Direct Anterior Versus Posterior Approach for Total Hip Arthroplasty Performed for Displaced Femoral Neck Fractures.

OBJECTIVES: To compare perioperative, 90-day, and 1-year postoperative complications and outcomes between the direct anterior approach (DAA) and the posterior approach for total hip arthroplasty in geriatric patients with displaced femoral neck fractures (FNFs). DESIGN: Retrospective cohort study. SETTING: Multicenter Health care Consortium. PATIENTS: Seven-hundred and nine patients 60 years or older with acute displaced FNFs between 2009 and 2021. INTERVENTION: Total hip arthroplasty using either DAA or posterior approach. MAIN OUTCOME MEASUREMENTS: Rates of postoperative complications including dislocations, reoperations, and mortality at 90 days and 1 year postoperatively. Secondary outcome measures included ambulation capacity at discharge, ambulation distance with inpatient physical therapy, discharge disposition, and narcotic prescription quantities (morphine milligram equivalents). RESULTS: Through a multivariable regression analysis, DAA was associated with significantly shorter operative time ( B = -6.89 minutes; 95% confidence interval [CI] -12.84 to -0.93; P = 0.024), lower likelihood of blood transfusion during the index hospital stay (adjusted odds ratios = 0.54; 95% CI 0.27 to 0.96; P = 0.045), and decreased average narcotic prescription amounts at 90 days (B = -230.45 morphine milligram equivalents; 95% CI -440.24 to -78.66; P = 0.035) postoperatively. There were no significant differences in medical complications, dislocations, reoperations, and mortality at 90 days and 1 year postoperatively. CONCLUSION: When comparing the DAA versus posterior approach for total hip arthroplasty performed for displaced FNF, DAA was associated with shorter operative time, lower likelihood of blood transfusion, and lower 90-day postoperative narcotic prescription amounts. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

An Analysis of a Decade of Lumbar Interbody Cage Failures in the United States: A MAUDE Database Study.

STUDY DESIGN: A retrospective case series. OBJECTIVE: This study aims to assess the rates of lumbar interbody cage failures based on their material and manufacturer. SUMMARY OF BACKGROUND DATA: Perioperative lumbar interbody cage malfunctions are underreported events in the spine literature and may result in complications. Although the Food and Drug Administration ensures the safety of these devices under physiological conditions after implantation, these devices may experience nonphysiological conditions during implantation, which may be overlooked. MATERIALS AND METHODS: The MAUDE database was examined for reports of lumbar cage device malfunctions from 2012 to 2021. Each report was categorized based on failure type and implant design. A market analysis was performed by dividing the total number of failures per year for each manufacturer by their approximate yearly revenue from spinal implants in the United States. Outlier analysis was performed to generate a threshold value above which failure rates were defined as greater than the normal index. RESULTS: Overall, 1875 lumbar cage malfunctions were identified. Of these, 1230 (65.6%) were cage breakages, 257 (13.7%) were instrument malfunctions, 177 (9.4%) were cage migrations, 143 (7.6%) were assembly failures, 70 (4.5%) were screw-related failures, and 21 (1.1%) were cage collapses. Of the breakages, 923 (74.9%) occurred during insertion or impaction and 97 entries detailed a medical complication or a retained foreign body. Of the migrations, 155 (88.6%) were identified postoperatively, of which 73 (47.1%) detailed complications and 52 (33.5%) required a revision procedure. Market analysis demonstrated that Medtronic, Zimmer Biomet, Stryker, Seaspine, and K2M exceeded the calculated threshold. CONCLUSIONS: Lumbar cages with polyether ether ketone core material failed more frequently by breakage, whereas titanium surface cages failed more frequently by migration. Failure rates varied depending on the manufacturer. Most cage breakages identified in the present study occurred intraoperatively during implantation. These findings call for a more detailed Food and Drug Administration evaluation of these intraoperative malfunctions before commercial approval. LEVEL OF EVIDENCE: Level 4.

Pyogenic spinal infections warrant a total spine MRI.

Study design: retrospective case series. Objective: the presenting clinical symptoms of spinal infections are often nonspecific and a delay in diagnosis can lead to adverse patient outcomes. The morbidity and mortality of patients with multifocal spinal infections is significantly higher compared to unifocal infections. The purpose of the current study was to analyse the risk factors for multifocal spinal infections. Methods: we conducted a retrospective review of all pyogenic non-tuberculous spinal infections treated surgically at a single tertiary care medical center from 2006-2020. The medical records, imaging studies, and laboratory data of 43 patients during this time period were reviewed and analysed after receiving Institutional Review Board approval. Univariate and multivariate analyses were performed to identify factors associated with a multifocal spinal infection. Results: 15 patients (35 %) had multifocal infections. In univariate analysis, there was a significant association with chronic kidney disease ( p = 0.040 ), gender ( p = 0.003 ), a white blood cell count ( p = 0.011 ), and cervical ( p < 0.001 ) or thoracic ( p < 0 .001) involvement. In multivariate analysis, both cervical and thoracic involvement remained statistically significant ( p = 0.001 and p < 0.001 , respectively). Conclusions: patients with infections in the thoracic or cervical region are more likely to have a multifocal infection. Multifocal pyogenic spinal infections remain a common entity and a total spine MRI should be performed to aid in prompt diagnosis.

Conditional survival after surgery for metastatic tumors of the spine: does prognosis change over time?

PURPOSE: Conditional survival (CS) provides a dynamic prediction of patient survival by incorporating the time an individual has already survived given their disease specific characteristics. The objective of the current study was to estimate CS among patients after surgery for spinal cord compression or spinal instability, as well as stratify CS according to relevant patient- and disease-related characteristics. METHODS: The clinical outcomes of 361 patients undergoing surgical management of metastatic spinal tumors were retrospectively analyzed. Stratification of this cohort according to disease and surgery-specific characteristics allowed for univariate and multivariate statistical analyses of our study population. Observed overall and conditional survival estimates were calculated by the Kaplan-Meier method. RESULTS: 12-month conditional survival in patients undergoing surgical management of metastatic spine tumors increased from 57% at baseline to 70% at 24 months following spine surgery. Overall survival (OS) was influenced by CCI grade, Katagiri tumor type, presence of lung metastasis, type of spine surgery, presence of postoperative systemic therapy and ambulatory status at follow-up. Analyses of OS and CS by prognostic strata were similar with exception of stratification by surgery type. Differences in survival between strata tend to converge over time. Unfavorable factors for OS appear to be less relevant after a period of 24 months following spine surgery. CONCLUSION: Patients after surgery for metastatic tumors of the spine can expect a positive trend in conditional survival as survivorship increases. Even patients with a more severe disease can be encouraged with gains in conditional survival over time. LEVEL OF EVIDENCE: Level IV (retrospective cohort study).

The high-risk hip fracture patient and the palliative care consult : A retrospective study to investigate risks of complications and the utility of a palliative care consult in hip fracture patients undergoing surgical fixation.

We evaluated the utility of a palliative care consult (PCC) in high-risk hip fracture patients. The main result was that a PCC reflects certain risk factors for post-surgical complications and is associated with a delay to surgery in the high-risk patient population that it served. PURPOSE: The objective of this study was to identify risks of complications in surgically managed hip fractures and determine the utility of a PCC in this population, particularly regarding time to the operating room (OR). METHODS: Retrospective cohort at a Level I academic trauma center. RESULTS: Four hundred sixty-two patients were treated surgically for hip fracture. Decreased pre-injury ambulatory status (OR 2.18, 95% CI 1.13-4.20, p = .02), time to OR > 48 h (OR 4.76, 95% CI 1.43-15.87, p = .011), and obtaining a pre-operative PCC (OR 3.03, 95% CI 1.34-6.85, p = .008) were independent risk factors for post-surgical complications. Multivariate risk factors for obtaining a PCC included older age (OR 1.1, CI 1.0-1.1, p = .007), pre-injury ambulatory status (OR 2.2, CI 1.3-3.9, p = .005), renal failure (OR 3.1, CI 1.1-9.0, p = 0.032), and higher ASA category (OR 2.6, CI 1.2-5.5, p = .014). A delay of more than 48 h was associated with being male ( OR 4.6, CI 1.4-15.0, p = .013) or having obtained a PCC (OR 5.5, CI 1.4-22.7, p = .017). CONCLUSIONS: Obtaining a PCC can reflect risks of complications and mortality. It is a valuable resource for use in high-risk patients who are inherently at risk for delays to surgery and should be used judiciously.

Missing the first post-operative visit is an independent risk factor for 90-day complication and re-admission following hip fracture surgery.

Introduction: Knowing the risk factors for poor outcomes following hip fracture surgery is necessary for appropriate patient care. The objective of this study was to determine if the first post-operative visit (POV) following hip fracture surgery is a risk factor for increased mortality, complications, and re-admissions. Methods: This was a retrospective review of 285 patients who underwent operative fixation of a hip fracture at an academic acute care hospital. Outcome measurements were 90-day and one year mortality, 90-day complications, and 90-day re-admission rates in patients who missed or attended their first post-operative visit following hip fracture surgery. Results: 279 patients met inclusion criteria and had sufficient data for analysis, of which 213 (76.3%) made their first post-operative visit. 90-day and one-year mortality were significantly higher in the patients who missed their first POV (31.8% vs. 4.2%; 51.5% vs. 12.7%). Independent risk factors for 90-day complications were missing the first POV, coronary artery disease, and lower pre-injury status (ORs = 10.65, 2.80, 7.89, respectively). Independent risk factors for 90-day re-admission were missing the first POV, chronic obstructive pulmonary disease on home oxygen, and lower re-injury status (ORs = 8.04, 5.44, 5.47, respectively). Conclusion: Missing the first POV was the strongest independent risk factor for 90-day complications and 90-day readmission. Patients who miss their first POV have significantly higher 90-day and one year mortality rates.

Hardware Failure in Spinal Tumor Surgery: A Hallmark of Longer Survival?

OBJECTIVE: Instrumentation failure in spine tumor surgery is a common reason for revision operation. Increases in patient survival demand a better understanding of the hardware longevity. The study objective was to investigate risk factors for instrumentation failure requiring revision surgery in patients with spinal tumors. METHODS: A retrospective cohort from a single tertiary care specialty hospital from January 2005 to January 2021, for patients with spinal primary or metastatic tumors who underwent surgical intervention with instrumentation. Demographic and treatment data were collected and analyzed. Kaplan-Meier analysis was performed for overall survival, and separate univariate and multivariate regression analysis was performed. RESULTS: Three hundred fifty-one patients underwent surgical intervention for spinal tumor, of which 23 experienced instrumentation failure requiring revision surgery (6.6%). Multivariate regression analysis identified pelvic fixation (odds ratio [OR], 10.9), spinal metastasis invasiveness index (OR, 1.11), and survival of greater than 5 years (OR, 3.6) as significant risk factors for hardware failure. One- and 5-year survival rates were 57% and 8%, respectively. CONCLUSION: Instrumentation failure after spinal tumor surgery is a common reason for revision surgery. Our study suggests that the use of pelvic fixation, invasiveness of the surgery, and survival greater than 5 years are independent risk factors for instrumentation failure.