Biologics, theranostics, and personalized medicine in drug delivery systems.

The progress in human disease treatment can be greatly advanced through the implementation of nanomedicine. This approach involves targeted and cell-specific therapy, controlled drug release, personalized dosage forms, wearable drug delivery, and companion diagnostics. By integrating cutting-edge technologies with drug delivery systems, greater precision can be achieved at the tissue and cellular levels through the use of stimuli-responsive nanoparticles, and the development of electrochemical sensor systems. This precision targeting - by virtue of nanotechnology - allows for therapy to be directed specifically to affected tissues while greatly reducing side effects on healthy tissues. As such, nanomedicine has the potential to transform the treatment of conditions such as cancer, genetic diseases, and chronic illnesses by facilitating precise and cell-specific drug delivery. Additionally, personalized dosage forms and wearable devices offer the ability to tailor treatment to the unique needs of each patient, thereby increasing therapeutic effectiveness and compliance. Companion diagnostics further enable efficient monitoring of treatment response, enabling customized adjustments to the treatment plan. The question of whether all the potential therapeutic approaches outlined here are viable alternatives to current treatments is also discussed. In general, the application of nanotechnology in the field of biomedicine may provide a strong alternative to existing treatments for several reasons. In this review, we aim to present evidence that, although in early stages, fully merging advanced technology with innovative drug delivery shows promise for successful implementation across various disease areas, including cancer and genetic or chronic diseases.

Engineering carrier nanoparticles with biomimetic moieties for improved intracellular targeted delivery of mRNA therapeutics and vaccines.

Biological membrane-engineered lipid nanoparticles (LNP) have shown enormous potential as vehicles for drug delivery due to their outstanding biomimetic properties. To make these nanoparticles more adaptable to complex biological systems, several methods and cellular sources have been adopted to introduce biomembrane-derived moieties onto LNP and provide the latter with more functions while preserving their intrinsic nature. In this review, we focus on LNP decoration with specific regard to mRNA therapeutics and vaccines. The bio-engineering approach exploits a variety of biomembranes for functionalization, such as those derived from red blood cells, white blood cells, cancer cells, platelets, exosomes, and others. Biomembrane engineering could greatly enhance efficiency in targeted drug delivery, treatment, and diagnosis of cancer, inflammation, immunological diseases, and a variety of pathologic conditions. These membrane-modification techniques are expected to advance biomembrane-derived LNP into wider applications in the future.

Lipid Nanoparticles Loading Steroidal Alkaloids of Tomatoes Affect Neuroblastoma Cell Viability in an In Vitro Model.

Tomato by-products represent a good source of phytochemical compounds with health properties, such as the steroidal glycoalkaloid α-tomatine (α-TM) and its aglycone tomatidine (TD). Both molecules have numerous beneficial properties, such as potential anticancer activity. Unfortunately, their therapeutic application is limited due to stability and bioavailability issues. Therefore, a valid strategy seems to be their encapsulation into Solid Lipid Nanoparticles (SLN). The nanoformulations containing α-TM (α-TM-SLN) and TD (TD-SLN) were prepared by solvent-diffusion technique and subsequently characterized in terms of technological parameters (particle size, polydispersity index, zeta potential, microscopy, and calorimetric studies). To assess the effect of α-TM and TD on the percentage of cellular viability in Olfactory Ensheathing Cells (OECs), a peculiar glial cell type of the olfactory system used as normal cells, and in SH-SY5Y, a neuroblastoma cancer cell line, an MTT test was performed. In addition, the effects of empty, α-TM-SLN, and TD-SLN were tested. Our results show that the treatment of OECs with blank-SLN, free α-TM (0.25 µg/mL), and TD (0.50 µg/mL) did not induce any significant change in the percentage of cell viability when compared with the control. In contrast, in SH-SY5Y-treated cells, a significant decrease in the percentage of cell viability when compared with the control was found. In particular, the effect appeared more evident when SH-SY5Y cells were exposed to α-TM-SLN and TD-SLN. No significant effect in blank-SLN-treated SH-SY5T cells was observed. Therefore, SLN is a promising approach for the delivery of α-TM and TD.

Ketorolac Loaded Poly(lactic-co-glycolic acid) Coating of AZ31 in the Treatment of Bone Fracture Pain.

Biodegradable metal alloys may be successfully used to support bone repair, avoiding second surgery commonly needed when inert metal alloys are used. Combining a biodegradable metal alloy with a suitable pain relief agent could improve patient quality of life. AZ31 alloy was coated using a poly(lactic-co-glycolic) acid (PLGA) polymer loaded with ketorolac tromethamine using the solvent casting method. The ketorolac release profile from the polymeric film and the coated AZ31 samples, the PLGA mass loss of polymeric film, and the cytotoxicity of the optimized coated alloy were assessed. The coated sample showed a ketorolac release that was prolonged for two weeks, which was slower than that of just the polymeric film, in simulated body fluid. PLGA mass loss was complete after a 45-day immersion in simulated body fluid. The PLGA coating was able to lower AZ31 and ketorolac tromethamine cytotoxicity observed in human osteoblasts. PLGA coating also prevents AZ31 cytotoxicity, which was identified in human fibroblasts. Therefore, PLGA was able to control ketorolac release and protect AZ31 from premature corrosion. These characteristics allow us to hypothesize that the use of ketorolac tromethamine-loaded PLGA coating on AZ31 in the management of bone fractures can favor osteosynthesis and relief pain.

Effect of Cocoa Roasting on Chocolate Polyphenols Evolution.

Cocoa and chocolate antioxidants might contribute to human health through, for instance, blood flow improvement or blood pressure and glycemia reduction, as well as cognitive function improvement. Unfortunately, polyphenol content is reduced during cocoa fermentation, drying, roasting and all the other phases involved in the chocolate production. Here, we investigated the evolution of the polyphenol content during all the different steps of chocolate production, with a special emphasis on roasting (3 different roasting cycles with 80, 100, and 130 °C as maximum temperature). Samples were followed throughout all processes by evaluating the total polyphenols content, the antioxidant power, the epicatechin content, and epicatechin mean degree of polymerization (phloroglucinol adducts method). Results showed a similar trend for total polyphenol content and antioxidant power with an unexpected bell-shaped curve: an increase followed by a decrease for the three different roasting temperatures. At the intermediate temperature (100 °C), the higher polyphenol content was found just after roasting. The epicatechin content had a trend similar to that of total polyphenol content but, interestingly, the mean degree of polymerization data had the opposite behavior with some deviation in the case of the highest temperature, probably due to epicatechin degradation. It seems likely that roasting can free epicatechin from oligomers, as a consequence of oligomers remodeling.

Turning Microbial AhR Agonists into Therapeutic Agents via Drug Delivery Systems.

Developing therapeutics for inflammatory diseases is challenging due to physiological mucosal barriers, systemic side effects, and the local microbiota. In the search for novel methods to overcome some of these problems, drug delivery systems that improve tissue-targeted drug delivery and modulate the microbiota are highly desirable. Microbial metabolites are known to regulate immune responses, an observation that has resulted in important conceptual advances in areas such as metabolite pharmacology and metabolite therapeutics. Indeed, the doctrine of "one molecule, one target, one disease" that has dominated the pharmaceutical industry in the 20th century is being replaced by developing therapeutics which simultaneously manipulate multiple targets through novel formulation approaches, including the multitarget-directed ligands. Thus, metabolites may not only represent biomarkers for disease development, but also, being causally linked to human diseases, an unexploited source of therapeutics. We have shown the successful exploitation of this approach: by deciphering how signaling molecules, such as the microbial metabolite, indole-3-aldehyde, and the repurposed drug anakinra, interact with the aryl hydrocarbon receptor may pave the way for novel therapeutics in inflammatory human diseases, for the realization of which drug delivery platforms are instrumental.

Biodrug Delivery Systems: Do mRNA Lipid Nanoparticles Come of Age?

As an appealing alternative to treat and prevent diseases ranging from cancer to COVID-19, mRNA has demonstrated significant clinical effects. Nanotechnology facilitates the successful implementation of the systemic delivery of mRNA for safe human consumption. In this manuscript, we provide an overview of current mRNA therapeutic applications and discuss key biological barriers to delivery and recent advances in the development of nonviral systems. The relevant challenges that LNPs face in achieving cost-effective and widespread clinical implementation when delivering mRNA are likewise discussed.

Development of a new indole derivative dry powder for inhalation for the treatment of biofilm-associated lung infections.

The aim of this work was to produce an inhalable dry powder formulation of a new anti-biofilm compound (SC38). For this purpose, chitosan was used as a polymeric carrier and l-leucine as a dispersibility enhancer. SC38 was entrapped by spray-drying into previously optimized chitosan microparticles. The final formulation was fully characterized in vitro in terms of particle morphology, particle size and distribution, flowability, aerodynamic properties, anti-biofilm activity and effects on lung cell viability. The SC38-loaded chitosan microparticles exhibited favorable aerodynamic properties with emitted and respirable fractions higher than 80 % and 45 % respectively. The optimized formulation successfully inhibited biofilm formation at microparticle concentrations starting from 20 µg/mL for methicillin-sensitive and 100 µg/mL for methicillin-resistant Staphylococcus aureus and showed a relatively safe profile in lung cells after 72 h exposure. Future in vivo tolerability and efficacy studies are needed to unravel the potential of this novel formulation for the treatment of difficult-to-treat biofilm-mediated lung infections.

Pulmonary drug delivery technology enables anakinra repurposing in cystic fibrosis.

Inflammation is a key pathological driver in cystic fibrosis (CF). Current therapies are ineffective in treating and preventing the escalation of inflammatory events often exacerbated by superimposed infection. In this work, we propose a novel treatment based on the pulmonary administration of anakinra, a non-glycosylated recombinant form of IL-1Ra. An inhalable dry powder of anakinra was successfully developed to meet the specific needs of lung drug delivery. The new formulation was investigated in vitro for aerodynamic performances and activity and in vivo for its pharmacological profile, including the pharmacokinetics, treatment schedule, antimicrobial and anti-inflammatory activity and systemic toxicity. The protein was structurally preserved inside the formulation and retained its pharmacological activity in vitro immediately after preparation and over time when stored at ambient conditions. Anakinra when delivered to the lungs showed an improved and extended therapeutic efficacy in CF models in vivo as well as higher potency compared to systemic delivery. Peripheral side effects were significantly reduced and correlated with lower serum levels compared to systemic treatment. These findings provide proof-of-concept demonstration for anakinra repurposing in CF through the pulmonary route.

Development of spray-dried N-acetylcysteine dry powder for inhalation.

N-acetylcysteine (NAC) has both antioxidant and immunomodulatory activities and has been used as adjuvant therapy in several viral infections. Recently, NAC attracted attention for its possible role in reducing the affinity of the spike protein receptor binding domain to angiotensin-converting enzyme (ACE2) receptors. Since only NAC solutions are available for inhalation, the purpose of the work was to develop a NAC dry powder for inhalation using mannitol or leucine as excipient. The powder was successfully produced using co-spray-drying with leucine. ATR-FTIR analyses evidenced spectral variations ascribed to the formation of specific interactions between NAC and leucine. This effect on the NAC environment was not evident for NAC-mannitol powders, but mannitol was in a different polymorphic form compared to the supplied material. Both the feedstock concentration and the leucine content have an impact on the powder aerodynamic features. In particular, to maximize the respirable fraction, it is preferable to produce the powder starting from a 0.5 % w/v feedstock solution using 33 to 50 % w/w leucine content. The NAC-leucine powder was stable for ten months maintaining NAC content of 50 % (w/w) and about 200 µg of NAC was able to deposit on a transwell insert, useful for future in vitro studies.

Unconventional Extraction of Total Non-Polar Carotenoids from Pumpkin Pulp and Their Nanoencapsulation.

Pumpkin is considered a functional food with beneficial effects on human health due to the presence of interesting bioactives. In this research, the impact of unconventional ultrasound-assisted extraction (UAE) and microwave-assisted extraction techniques on the recovery of total non-polar carotenoids from Cucurbita moschata pulp was investigated. A binary (hexane:isopropanol, 60:40 v/v) and a ternary (hexane:acetone:ethanol, 50:25:25 v/v/v) mixture were tested. The extracts were characterized for their antioxidant properties by in vitro assays, while the carotenoid profiling was determined by high-performance liquid chromatography coupled with a diode array detector. UAE with the binary mixture (30 min, 45 °C) was the most successful extracting technique, taking into consideration all analytical data and their correlations. In parallel, solid lipid nanoparticles (SLN) were optimized for the encapsulation of the extract, using ß-carotene as a reference compound. SLN, loaded with up to 1% ß-carotene, had dimensions (~350 nm) compatible with increased intestinal absorption. Additionally, the ABTS ((2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay showed that the technological process did not change the antioxidant capacity of ß-carotene. These SLN will be used to load an even higher percentage of the extract without affecting their dimensions due to its liquid nature and higher miscibility with the lipid with respect to the solid ß-carotene.

Wound Dressing: Combination of Acacia Gum/PVP/Cyclic Dextrin in Bioadhesive Patches Loaded with Grape Seed Extract.

The success of wound treatment is conditioned by the combination of both suitable active ingredients and formulation. Grape seed extract (GSE), a waste by-product obtained by grape processing, is a natural source rich in many phenolic compounds responsible for antioxidant, anti-inflammatory, and antimicrobial activities and for this reason useful to be used in a wound care product. Bioadhesive polymeric patches have been realized by combining acacia gum (AG) and polyvinylpyrrolidone (PVP). Prototypes were prepared by considering different AG/PVP ratios and the most suitable in terms of mechanical and bioadhesion properties resulted in the 9.5/1.0 ratio. This patch was loaded with GSE combined with cyclic dextrin (CD) to obtain the molecular dispersion of the active ingredient in the dried formulation. The loaded patch resulted mechanically resistant and able to release GSE by a sustained mechanism reaching concentrations able to stimulate keratinocytes' growth, to exert both antibacterial and antioxidant activities.

Exploring Taxifolin Polymorphs: Insights on Hydrate and Anhydrous Forms.

Taxifolin, also known as dihydroquercetin, possesses several interesting biological properties. The purpose of the study was to identify polymorphs of taxifolin prepared using crystallization in different solvents. Data from X-ray powder diffraction, differential scanning calorimetry, and thermogravimetry enabled us to detect six different crystalline phases for taxifolin. Besides the already known fully hydrated phase, one partially hydrated phase, one monohydrated phase, two anhydrous polymorphs, and one probably solvated phase were obtained. The unit cell parameters were defined for three of them, while one anhydrous polymorph was fully structurally characterized by X-ray powder diffraction data. Scanning electron microscopy and hot stage microscopy were also employed to characterize the crystallized taxifolin powders. The hydrate and anhydrous forms showed remarkable stability in drastic storage conditions, and their solubility was deeply evaluated. The anhydrous form converted into the hydrate form during the equilibrium solubility study and taxifolin equilibrium solubility was about 1.2 mg/mL. The hydrate taxifolin intrinsic dissolution rate was 56.4 µg cm-2 min-1. Using Wood's apparatus, it was not possible to determine the intrinsic dissolution rate of anhydrous taxifolin that is expected to solubilize more rapidly than the hydrate form. In view of its high stability, its use can be hypothesized.

Dry Powder Inhalers in the Digitalization Era: Current Status and Future Perspectives.

During the last decades, the term "drug delivery systems" (DDSs) has almost fully replaced previously used terms, such as "dosage forms", in an attempt to emphasize the importance of the drug carrier in ensuring the claimed safety and effectiveness of the product. However, particularly in the case of delivery devices, the term "system", which by definition implies a profound knowledge of each single part and their interactions, is not always fully justified when using the DDS term. Within this context, dry powder inhalers (DPIs), as systems to deliver drugs via inhalation to the lungs, require a deep understanding of the complex formulation-device-patient interplay. As of now and despite the progress made in particle engineering and devices design, DPIs' clinical performance is limited by variable patients' breathing patterns. To circumvent this pitfall, next-generation DPIs should ideally adapt to the different respiratory capacity of individuals across age, health conditions, and other related factors. In this context, the recent wave of digitalization in the health care and industrial sectors may drive DPI technology towards addressing a personalized device-formulation-patient liaison. In this review, evolving technologies are explored and analyzed to outline the progress made as well as the gaps to fill to align novel DPIs technologies with the systems theory approach.

Exploiting Food-Grade Mesoporous Silica to Preserve the Antioxidant Properties of Fresh Olive Mill Wastewaters Phenolic Extracts.

Fresh olive mill wastewaters phenolic extracts are of great interest as preservatives or fortifying ingredients but are characterized by limited stability. The purpose of this study was to use mesoporous silica to enhance their stability and preserve their antioxidant properties. The phenolic extracts were characterized for their composition by HPLC-DAD and included in a mesoporous matrix with or without a lipid coating. The inclusion complexes were characterized in terms of total phenolic content, radical scavenging capacity and in vitro antioxidative activity and cell compatibility. Besides, inclusion complex stability under different storage conditions (22 and 37 °C, 75% relative humidity, 1 month) was evaluated. The inclusion process was nearly quantitative and modified neither the total phenolic content nor the total antioxidant capacity. None of the inclusion complex concentrations assayed on the HT29 cell line showed toxicity. Moreover, HT29 cells treated with the inclusion complex exhibited a significant antioxidant effect, while the lipid coating impaired the antioxidant activity. The complexes without lipid were stable under all the investigated conditions, while the lipid-coated products were less stable under the more drastic conditions. Overall, inclusion complexes in mesoporous silica have suitable characteristics to be used for different applications, including food supplementation.

Leaves and Fruits Preparations of Pistacia lentiscus L.: A Review on the Ethnopharmacological Uses and Implications in Inflammation and Infection.

There is an increasing interest in revisiting plants for drug discovery, proving scientifically their role as remedies. The aim of this review was to give an overview of the ethnopharmacological uses of Pistacia lentiscus L. (PlL) leaves and fruits, expanding the search for the scientific discovery of their chemistry, anti-inflammatory, antioxidative and antimicrobial activities. PlL is a wild-growing shrub rich in terpenoids and polyphenols, the oil and extracts of which have been widely used against inflammation and infections, and as wound healing agents. The more recurrent components in PlL essential oil (EO) are represented by α-pinene, terpinene, caryophyllene, limonene and myrcene, with high variability in concentration depending on the Mediterranean country. The anti-inflammatory activity of the oil mainly occurs due to the inhibition of pro-inflammatory cytokines and the arachidonic acid cascade. Interestingly, the capacity against COX-2 and LOX indicates PlL EO as a dual inhibitory compound. The high content of polyphenols enriching the extracts provide explanations for the known biological properties of the plant. The protective effect against reactive oxygen species is of wide interest. In particular, their anthocyanins content greatly clarifies their antioxidative capacity. Further, the antimicrobial activity of PlL oil and extracts includes the inhibition of Staphylococcus aureus, Escherichia coli, periodontal bacteria and Candida spp. In conclusion, the relevant scientific properties indicate PlL as a nutraceutical and also as a therapeutic agent against a wide range of diseases based on inflammation and infections.

Taxifolin and gastro-adhesive microparticles containing taxifolin promotes gastric healing in vivo, inhibits Helicobacter pylori in vitro and proton pump reversibly in silico.

Taxifolin (3,5,7,3,4-pentahydroxy flavanone or dihydroquercetin, Tax) was identified as a gastroprotective compound and a gastroadhesive formulation was recently developed to prolong its residence time and release in the stomach. So, the gastric healing effectiveness of Tax and gastro-mucoadhesive microparticles containing Tax (MPTax) against the acetic acid induced-gastric ulcer in rats was investigated in this study. Moreover, the interactions between Tax and H+/K+-ATPase were investigated in silico, and its anti- H. pylori activity was determined in vitro. The oral treatment with MPTax (81.37 mg/kg, containing 12.29% of Tax) twice a day for seven days reduced the ulcer area by 63%, compared to vehicle-treated group (Veh: 91.9 ± 10.3 mm2). Tax (10 mg/kg, p.o) reduced the ulcer by 40% but with a p = 0.07 versus Veh group. Histological analysis confirmed these effects. Tax and MPTax increased the gastric mucin amount, reduced the myeloperoxidase activity, and increased the glutathione reduced content at ulcer site. However, only MPTax decreased the lipoperoxide accumulation at ulcer site. Besides, Tax and MPTax normalize the catalase and glutathione S-transferase activity. Tax showed reversible interaction with H+/K+-ATPase in silico and its anti-H. pylori effects was confirmed (MIC = 625 µg/mL). These results suggest that the antiulcer property of Tax involves the strengthening of the gastric protective factors in parallel to its inhibitory interaction with H+/K+-ATPase and H. pylori. Considering that ulcer healing action displayed by Tax was favored by gastroadhesive microparticles, this approach seems to be promising for its oral delivery to treat acid-peptic diseases.

Tumor Targeting by Peptide-Decorated Gold Nanoparticles.

Cancer remains one of the most important challenges in biomedical sciences. Chemotherapeutic agents are very potent molecules that exhibit a significant level of toxicity in numerous tissues of the body, particularly in those characterized by high proliferative activity, such as the bone marrow. The scenario is even more complex in the case of the central nervous system, and in particular brain tumors, where the blood brain barrier limits the efficacy of drug therapies. Integrins, transmembrane proteins widely expressed in different types of cancer (glioblastoma, melanoma, and breast cancer), regulate the angiogenic process and play a pivotal role in tumor growth and invasion. Here, we report a nanotechnology strategy based on the use of AuNPs decorated with an arginine-glycine-aspartic acid-like peptide for the diagnosis and treatment of cancer. Two hours after administration in mice, the accumulation of the peptide-decorated NPs in the subcutaneous tumor was ∼4-fold higher than that of uncoated particles and ∼1.4-fold higher than that of PEGylated particles. Also, in the case of the intracranial tumor model, interesting results were obtained. Indeed, 2 h after administration, the amount of peptide-decorated particles in the brain was 1.5-fold that of undecorated particles and 5-fold that of PEGylated particles. In conclusion, this preliminary study demonstrates the high potential of this carrier developed for diagnostic and therapeutic applications.

Dynamics of Clay-Intercalated Ibuprofen Studied by Solid State Nuclear Magnetic Resonance.

In designing drug delivery systems with improved release properties and bioavailability, the dynamic features of the active pharmaceutical ingredient can be crucial for the final product properties. In this work, we aimed at obtaining the first characterization of the molecular dynamic properties of one of the most common nonsteroidal anti-inflammatory drug, ibuprofen, intercalated in hydrotalcite, an interesting inorganic carrier. By exploiting a variety of solid state NMR techniques, including 1H and 13C MAS spectra and T1 relaxation measurements, performed at variable temperature and carrying out a synergic analysis of all results, it has been possible to ascertain that the mobility of ibuprofen within the carrier is remarkably increased. In particular, strong indications have been obtained that ibuprofen molecules, in addition to internal interconformational dynamics, experience an overall molecular motion. Also considering that ibuprofen is "anchored" to the charged surface of the hydrotalcite layers through its carboxylate moiety, such motion could be a wobbling-in-a-cone. Activation energies and correlation times of all the motions of intercalated ibuprofen have been determined.

D-leucine microparticles as an excipient to improve the aerosolization performances of dry powders for inhalation.

The objective of the work was to produce a new excipient based on D-leucine to improve the aerosolization properties of the poorly flowable micronized budesonide. The D-leucine powders produced by a nano spray-dryer were characterized in terms of dimensions, morphology, thermal behavior, X-ray powder diffraction and infrared spectroscopy. Then, micronized budesonide was mixed with the different leucine powders obtained or commercial D-leucine at different weight ratios (1:1, 5:1, 10:1) to investigate their aerodynamic characteristics using a glass twin-stage impinger. Commercial D-leucine powder is composed of large flattened crystals of about 30 µm with ~3 µm thickness, while micronized budesonide appeared as small irregular crystals. After spray-drying, D-leucine particles appeared wrinkled and porous. Particle sizes were mainly influenced by the amino acid concentration. Aerodynamic assessment showed that D-leucine was able to improve the aerodynamic behavior of micronized budesonide from about 28 to 45% emitted fraction. The best aerodynamic properties were obtained with D-leucine powdered from a water:ethanol (1:1, v:v) solution and using micronized budesonide:leucine weight ratio of 5:1. The direct physical mixing of the atomized D-leucine with the micronized active pharmaceutical ingredient is a valid and economic alternative for the production of carrier-free dry powders for inhalation.