Conformal antireflection coatings for optical dome covers by atomic layer deposition.

Complex 3D-shaped optics are difficult to coat with conventional technologies. In this research, large top-open optical glass cubes with a 100 mm side length were functionalized to simulate large dome-shaped optics. Antireflection coatings for the visible range (420-670 nm) and for a single wavelength (550 nm) were applied by atomic layer deposition simultaneously on two and six demonstrators, respectively. Reflectance measurements on both the inner and outer glass surfaces confirm a conformal AR coating with a residual reflectance significantly below 0.3% for visible wavelengths and 0.2% for single wavelengths on nearly the entire surface of the cubes.

Combined antifogging and antireflective double nanostructured coatings for LiDAR applications.

To increase the performance of optical systems, a good antireflective coating is required to ensure low reflectance and high transmittance of optical surfaces. Further problems, such as fogging that causes light scattering, negatively affect the image quality. This implies that other functional properties are also required. Presented here is a highly promising combination of an antireflective double nanostructure on top of an antifog coating with long-term stable properties, generated in a commercial plasma-ion-assisted coating chamber. It is demonstrated that the nanostructures do not affect the antifog properties and can be successfully used for many applications.

Optical interference coatings: measurement problem 2022 [Invited].

The 2022 Optical Interference Measurement Problem comprised the determination of the refractive index of a thin tantalum pentoxide film at a wavelength of 532 nm and the characterization of the UV band edge as an optional task.

Atomically Thin Metal-Dielectric Heterostructures by Atomic Layer Deposition.

Heterostructures increasingly attracted attention over the past several years to enable various optoelectronic and photonic applications. In this work, atomically thin interfaces of Ir/Al2O3 heterostructures compatible with micro-optoelectronic technologies are reported. Their structural and optical properties were determined by spectroscopic and microscopic techniques (XRR, XPS, HRTEM, spectroscopic ellipsometry, and UV/vis/NIR spectrophotometry). The XRR and HRTEM analyses reveal a layer-by-layer growth mechanism of Ir in atomic scale heterostructures, which is different from the typical island-type growth of metals on dielectrics. Alongside, XPS investigations imply the formation of Ir-O-Al bonding at the interfaces for lower Ir concentrations, in contrast to the nanoparticle core-shell structure formation. Precisely tuning the ratio of the constituents ensures the control of the dispersion profile along with a transition from effective dielectric to metallic heterostructures. The Ir coating thickness was varied ranging from a few angstroms to films of about 7 nm in the heterostructures. The transition has been observed in the structures containing individual Ir coating thicknesses of about 2-4 nm. Following this, we show epsilon-near-zero metamaterials with tunable dielectric constants by precisely varying the composition of such heterostructures. Overall, a comprehensive study on structural and optical properties of the metal-dielectric interfaces of Ir/Al2O3 heterostructures was addressed, indicating an extension of the material portfolio available for novel optical functionalities.

Acupuncture in Patients with Diabetic Peripheral Neuropathy-Related Complaints: A Randomized Controlled Clinical Trial.

Background: Diabetic polyneuropathy (DPN) is a common complication of diabetes, which presents with a loss of sensorimotor function or pain. This study assessed the effectiveness and safety of acupuncture as a treatment for DPN-related complaints. Methods: In this randomized controlled trial, patients with type II diabetes and symptoms of neuropathy in the lower limbs were included. A total of 12 acupuncture treatments were administered over 8 weeks. The waitlist control group received the same acupuncture treatment starting at week 16 (after baseline). Results: A total of 62 patients were randomized (acupuncture group n = 31; control group n = 31). The primary outcome was overall complaints, and it was reduced with a significant difference of 24.7 on a VAS (CI 95% 14.8;34.7, p < 0.001) between both groups in favor of acupuncture. Reductions were recorded for the secondary outcomes VAS pain, neuropathic pain symptom inventory (NPSI), emotional dimensions of pain, SF-12, and diabetic peripheral neuropathic pain impact (DPNPI) after the intervention and at the follow-ups in the acupuncture group. Adverse reactions were minor and transient. Conclusions: Acupuncture leads to a significant and lasting reduction in DPN-related complaints when compared to routine care and is well tolerated, with minor side effects.

Analysis of very low bacterial counts in small sample volumes using angle-resolved light scattering.

Because of its high sensitivity to even small objects and the quick measurement principle, angle-resolved scattering (ARS) measurements exhibit a promising potential as a rapid analysis tool for bacterial cells at small sample sizes and very low numbers of cells. In this study, investigations on scattered light from various bacterial cell samples revealed applicability down to single cell levels, which is a huge benefit compared to conventional methods that depend on time-consuming cellular growth over several hours or even days. With the proposed setup and data analysis method, it is possible to detect scatter differences among cell types, together with the cell concentration.

Slower progression of amyotrophic lateral sclerosis with external application of a Chinese herbal plaster-The randomized, placebo-controlled triple-blinded ALS-CHEPLA trial.

Background: Amyotrophic lateral sclerosis (ALS) is a chronic neurodegenerative disease characterized by gradually increasing damage to the upper and lower motor neurons. However, definitive and efficacious treatment for ALS is not available, and oral intake in ALS patients with bulbar involvement is complicated due to swallowing difficulties. Hypothesis/purpose: This study investigated whether the external plaster application of the herbal composition Ji-Wu-Li efficiently slows ALS progression because prior studies obtained promising evidence with oral herbal applications. Study design: The randomized, triple-blinded study compared the efficacy, safety, and tolerability of the application of Ji-Wu-Li plaster (JWLP) with placebo plaster (PLAP). Methods: In total, 120 patients with definite ALS, clinically probable ALS, or clinically probable laboratory-supported ALS were randomized in a 1:1 ratio to receive JWLP or PLAP. Patients were treated and observed for 20 weeks. The primary outcome was the ALSFRS-R score, while the secondary outcomes were the ALS-SSIT score and weight loss. Results: The mean±SD decrease in the ALSFRS-R over 20 weeks differed by 0.84 points in a group comparison (JWLP, -4.44 ± 1.15; PLAP, -5.28 ± 1.98; p = 0.005). The mean increase in the ALS-SSIT over 20 weeks differed by 2.7 points in a group comparison (JWLP, 5.361.15; PLAP, 8.06 ± 1.72; p < 0.001). The mean weight loss over 20 weeks differed by 1.65 kg in a group comparison (JWLP, -3.98 ± 2.61; PLAP, -5.63 ± 3.17; p = 0.002). Local allergic dermatitis suspected as causal to the intervention occurred in 10 of 60 participants in the JWLP group and 9 of 60 participants in the PLAP group. Systemic adverse events were mild, temporary, and considered unrelated to the intervention. Conclusion: The JWLP showed clinical efficacy in the progression of ALS, as measured by the ALSFRS-R, ALS-SSIT, and weight loss in a randomized, placebo-controlled trial. Because skin reactions occurred in both groups, the covering material needs improvement. All of the Ji Wu Li herbal ingredients regulate multiple mechanisms of neurodegeneration in ALS. Hence, JWLP may offer a promising and safe add-on therapy for ALS, particularly in patients with bulbar involvement, but a confirmative long-term multicentre study is required.

Topography stitching in the spatial frequency domain for the representation of mid-spatial frequency errors.

Sub-aperture fabrication techniques such as diamond turning, ion beam figuring, and bonnet polishing are indispensable tools in today's optical fabrication chain. Each of these tools addresses different figure and roughness imperfections corresponding to a broad spatial frequency range. Their individual effects, however, cannot be regarded as completely independent from each other due to the concurrent formation of form and finish errors, particularly in the mid-spatial frequency (MSF) region. Deterministic Zernike polynomials and statistical power spectral density (PSD) functions are often used to represent form and finish errors, respectively. Typically, both types of surface errors are treated separately when their impact on optical performance is considered: (i) wave aberrations caused by figure errors and (ii) stray light resulting from surface roughness. To fill the gap between deterministic and statistical descriptions, a generalized surface description is of great importance for bringing versatility to the entire optical fabrication chain by enabling easy and quick exchange of surface topography data between three disciplines: optical design, manufacturing, and characterization. In this work, we present a surface description by stitching the amplitude and unwrapped phase spectra of several surface topography measurements at different magnifications. An alternative representation of surface errors at different regimes is proposed, allowing us to bridge the gap between figure and finish as well as to describe the well-known MSF errors.

Shufeng Jiedu capsule ameliorates olfactory dysfunction via the AMPK/mTOR autophagy pathway in a mouse model of allergic rhinitis.

BACKGROUND: Shufeng Jiedu capsule (SFJDC) has been widely used as a conventional Chinese pharmaceutical agent for various upper respiratory infections, including acute lung injury, acute respiratory distress syndrome and allergic rhinitis (AR). However, its mechanism in AR remains unclear. PURPOSE: The present study aimed to decipher the antiallergic inflammatory effect of SFJDC in an AR model with olfactory dysfunction. Specifically, we wanted to explore whether SFJDC can improve the olfactory abnormality in AR mice and reduce the levels of inflammatory factors in the olfactory epithelium (OE) and olfactory bulb (OB). METHODS: To address the above issues, we constructed an AR model using C57BL/6 mice, which were sensitised and challenged with ovalbumin (OVA) by intraperitoneal injection. SFJDC (0.045 or 0.18 g/kg) was delivered by gavage administration 1 h prior to the intraperitoneal injection of OVA. The control mice received saline alone. Then, the animals were assessed according to the presence of nasal symptoms and nasal inflammation, and a buried food test was used to evaluate olfactory function. The levels of proteins involved in the AMPK/mTOR autophagy pathway in the OE and OB were investigated by western blotting and fluorescence staining. RESULTS: After OVA induction of AR and drug administration, we found that SFJDC significantly ameliorated the nasal symptoms and allergic inflammatory reaction of the nasal mucosa superior to cetirizine. A behavioural test indicated that the mice with AR had olfactory dysfunction, and SFJDC can ameliorate this behavior deficiency. Meanwhile, SFJDC clearly reduced the neuroinflammation level in OE tissue. In addition, SFJDC increased p-mTOR and decreased p-AMPK, beclin1, LC3 and cleaved caspase-3 levels in the OE. CONCLUSIONS: In addition to antibacterial and antiviral activities, SFJDC has marked anti-inflammatory effects in AR mice. Its mechanism of action in the nasal cavity involves inhibition of upregulated anti-inflammatory cytokines, modulation of autophagy and apoptosis levels and regulation of autophagy through the AMPK/mTOR pathway in the OE tissue of AR mice. Hence, SFJDC is a promising drug for AR, and clinical trials should further validate the therapeutic impact of SFJDC on AR with olfactory dysfunction.

Acupuncture improves chemotherapy-induced neuropathy explored by neurophysiological and clinical outcomes - The randomized, controlled, cross-over ACUCIN trial.

BACKGROUND: Chemotherapy-induced peripheral neuropathy (CIPN) is recognized as the second commonest side effect after chemotherapy. Besides neurological deficits and pain, it is a potential reason for terminating chemotherapy. Effective curative treatments of neurodegeneration are lacking. Hitherto, no randomized controlled study used nerve conduction studies (NCS), the gold standard diagnostic tool for peripheral neuropathy, as the primary outcome parameter for evaluating acupuncture for CIPN, which can also measure structural changes. METHODS: The study was carried out at the HanseMerkur Center for TCM at the University Medical Center, Hamburg-Eppendorf. Sixty patients with CIPN were included in the study after physical examination, subjective evaluation and quantitative evaluation by NCS. Subsequently, the patients were randomly assigned to Group 1 (30 patients), which received, in the first period, needle acupuncture and to Group 2 (30 patients), which was assigned to the waiting list in the first period. Group 1 received a standard 10-week bilateral treatment of ST34 (Liangqiu), EX-LE12 (Qiduan) and EX-LE8 (Bafeng). After 14 weeks, both groups were re-evaluated. Using a cross-over design, the patients of Group 2 received the same treatment procedure as Group 1 in the first period. Patients of Group 1 were assigned to the waiting list for the second period. After 28 weeks both groups were re-evaluated. Wilcoxon test was used as a pre-test to rule out carryover effects and to test for differences between acupuncture and the waiting list. Group assignment was not exposed to the statistician and the neurologist. RESULTS: Sural sensory nerve amplitude, and sural nerve conduction velocity, were significantly improved (p < 0.01, effect size (f) 0.55 and 0.49) compared to measurements in the waiting period. Change of NCS of the tibial nerve did not significantly differ in group comparison. Patients reported subjective improvement during acupuncture treatment superior to the waiting period for burning pain, cramps, numbness, frequency of symptoms (all p < 0.01) and unsteadiness of gait (p < 0.05). On physical examination, blind walking, heel-to-toe walking, distal pallhypesthesia (both p < 0.01), and the neuropathy deficit score (p < 0.05) were significantly improved during acupuncture treatment compared to the waiting period. CONCLUSION: Acupuncture can enhance structural regeneration in CIPN as measured by NCS, which is manifested in subjective improvement and neurological findings.

Plasma-Enhanced Atomic Layer Deposition of HfO2 with Substrate Biasing: Thin Films for High-Reflective Mirrors.

Tuning ion energies in plasma-enhanced atomic layer deposition (PEALD) processes enables fine control over the material properties of functional coatings. The growth, structural, mechanical, and optical properties of HfO2 thin films are presented in detail toward photonic applications. The influence of the film thickness and bias value on the properties of HfO2 thin films deposited at 100 °C using tetrakis(dimethylamino)hafnium (TDMAH) and oxygen plasma using substrate biasing is systematically analyzed. The HfO2 films deposited without a substrate bias show an amorphous microstructure with a low density, low refractive index, high incorporation of residual hydroxyl (OH) content, and high residual tensile stress. The material properties of HfO2 films significantly improved at a low bias voltage due to the interaction with oxygen ions accelerated to the film. Such HfO2 films have a higher density, higher refractive index, and lower residual OH incorporation than films without bias. The mechanical stress becomes compressive depending on the bias values. Further increasing the ion energies by applying a larger substrate bias results in a decrease of the film density, refractive index, and a higher residual OH incorporation as well as crystalline inclusions. The comparable material properties of the HfO2 films have been reported using tris(dimethylamino)cyclopentadienyl hafnium (TDMACpH) in a different apparatus, indicating that this approach can be transferred to various systems and is highly versatile. Finally, the substrate biasing technique has been introduced to deposit stress-compensated, crack- and delamination-free high-reflective (HR) mirrors at 355 and 532 nm wavelengths using HfO2 and SiO2 as high and low refractive index materials, respectively. Such mirrors could not be obtained without the substrate biasing during the deposition because of the high tensile stress of HfO2, leading to cracks in thick multilayer systems. An HR mirror for 532 nm wavelength shows a high reflectance of 99.93%, a residual transmittance of ∼530 ppm, and a low absorption of ∼11 ppm, as well as low scattering losses of ∼4 ppm, high laser-induced damage threshold, low mechanical stress, and high environmental stability.

Hybridized Exciton-Photon-Phonon States in a Transition Metal Dichalcogenide van der Waals Heterostructure Microcavity.

Excitons in atomically thin transition-metal dichalcogenides (TMDs) have been established as an attractive platform to explore polaritonic physics, owing to their enormous binding energies and giant oscillator strength. Basic spectral features of exciton polaritons in TMD microcavities, thus far, were conventionally explained via two-coupled-oscillator models. This ignores, however, the impact of phonons on the polariton energy structure. Here we establish and quantify the threefold coupling between excitons, cavity photons, and phonons. For this purpose, we employ energy-momentum-resolved photoluminescence and spatially resolved coherent two-dimensional spectroscopy to investigate the spectral properties of a high-quality-factor microcavity with an embedded WSe_{2} van der Waals heterostructure at room temperature. Our approach reveals a rich multibranch structure which thus far has not been captured in previous experiments. Simulation of the data reveals hybridized exciton-photon-phonon states, providing new physical insight into the exciton polariton system based on layered TMDs.

Shufeng Jiedu, a promising herbal therapy for moderate COVID-19:Antiviral and anti-inflammatory properties, pathways of bioactive compounds, and a clinical real-world pragmatic study.

BACKGROUND: Shufeng Jiedu capsules (SFJDC), a patented herbal drug composed of eight medicinal plants, is used for the treatment of different viral respiratory tract infectious diseases. Based on its antiviral, anti-inflammatory and immunoregulatory activity in acute lung injury, SFJDC might be a promising candidate for the treatment of COVID-19. PURPOSE: To evaluate the antiviral and anti-inflammatory properties and to discover the mechanism of action of SFJDC as a potential drug for the treatment of COVID-19. Furthermore, the study should determine the clinical effectiveness of SFJDC for the treatment of COVID-19. DESIGN: We analyzed the antiviral and anti-inflammatory effects of SFJDC in a HCoV-229E mouse model on lung index, virus load in the lung, the release of cytokines, and on T- and B-lymphocytes. The mechanism of action was further investigated by network analysis. Additionally, we investigated data from a clinical pragmatic real-world study for patients with confirmed COVID-19, to evaluate the clinical effect of SFJDC and to determine the best time to start the treatment. RESULTS: SFJDC significantly reduced the virus load in the lung of HCoV-229E mice (from 1109.29 ± 696.75 to 0 ± 0 copies/ml), decreased inflammatory factors IL-6, IL-10, TNF-α, and IFN-γ in the lung, and increased the amount of CD4+ and CD8+ cells in the blood compared to the model group. Network analysis revealed that SFJDC reduces the activity of NFκB via several signaling pathways. Quercetin, wogonin, and polydatin bind directly to the main protease (Mpro) of SARS-CoV-2. Clinical data showed that SFJDC, added to standard antiviral therapy (AVD), significantly reduced the clinical recovery time of COVID-19 and fatigue (from 3.55 ± 4.09 to 1.19 ± 2.28 days) as well as cough (from 5.67 ± 5.64 to 3.47 ± 3.75) days compared to AVD alone. SFJDC therapy was significantly more effective when used within the first 8 days after the onset of symptoms. CONCLUSION: SFJDC might be a promising drug for the treatment of COVID-19, but large-scale randomized, double-blinded, placebo-controlled clinical trials are needed to complement the real-world evidence. It might be beneficial to start SFJDC treatment as early as possible in suspected cases of COVID-19.

Black and white fused silica: modified sol-gel process combined with moth-eye structuring for highly absorbing and diffuse reflecting SiO2 glass.

Diffuse reflecting (white) and highly absorbing (black) fused silica based materials are presented, which combine volume modified substrates and surfaces equipped with anti-reflective moth-eye-structures. For diffuse reflection, micrometer sized cavities are created in bulk fused silica during a sol-gel process. In contrast, carbon black particles are added to get the highly absorbing material. The moth-eye-structures are prepared by block copolymer micelle nanolithography (BCML), followed by a reactive-ion-etching (RIE) step. The moth-eye-structures drastically reduce the specular reflectance on both diffuse reflecting and highly absorbing samples across a wide spectral range from 250 nm to 2500 nm and for varying incidence angles. The adjustment of the height of the moth-eye-structures allows us to select the spectral position of the specular reflectance minimum, which measures less than 0.1%. Diffuse Lambertian-like scattering and absorbance appear nearly uniform across the selected spectral range, showing a slight decrease with increasing wavelength.

The Course of Mild and Moderate COVID-19 Infections-The Unexpected Long-Lasting Challenge.

BACKGROUND: The course of disease in mild and moderate COVID-19 has many implications for mobile patients, such as the risk of spread of the infection, precautions taken, and investigations targeted at preventing transmission. METHODS: Three hundred thirty-one adults were hospitalized from January 21 to February 22, 2020, and classified as severe (10%) or critical (4.8%) cases; 1.5% died. Two hundred eighty-two (85.2%) mild or moderate cases were admitted to regular wards. Epidemiological, demographic, clinical, chest computed tomography (CT) scan, laboratory, treatment, and outcome data from patient records were analyzed retrospectively. RESULTS: Patients were symptomatic for 9.82±5.75 (1-37) days. Pulmonary involvement was demonstrated on a chest CT scan in 97.9% of cases. It took 16.81±8.54 (3-49) days from the appearance of the first symptom until 274 patients tested virus-negative in naso- and oropharyngeal (NP) swabs, blood, urine, and stool, and 234 (83%) patients were asymptomatic for 9.09±7.82 (1-44) days. Subsequently, 131 patients were discharged. One hundred sixty-nine remained in the hospital; these patients tested virus-free and were clinically asymptomatic because of widespread persisting or increasing pulmonary infiltrates. Hospitalization took 16.24±7.57 (2-47) days; the time interval from the first symptom to discharge was 21.37±7.85 (3-52) days. CONCLUSIONS: With an asymptomatic phase, disease courses are unexpectedly long until the stage of virus negativity. NP swabs are not reliable in the later stages of COVID-19. Pneumonia outlasts virus-positive tests if sputum is not acquired. Imminent pulmonary fibrosis in high-risk groups demands follow-up examinations. Investigation of promising antiviral agents should heed the specific needs of mild and moderate COVID-19 patients.

Influence of seed layers on optical properties of aluminum in the UV range.

The potential of titanium and copper seed layers to enhance the optical properties of aluminum films for ultra-violet (UV) applications is analyzed. The seed layers significantly influence the initial layer growth of aluminum films. For the titanium-seeded aluminum, a surface roughness of 0.34 nm was observed. UV spectral reflectance measurements showed an average higher reflectivity of 4.8% for wavelengths from 120 nm to 200 nm for the aluminum film grown on the titanium seed layer. Furthermore, the titanium-seeded aluminum coatings were stable at an elevated temperature of 225°C and showed no increase in surface roughness or pinholes.

Light scattering characterization of single-layer nanoporous SiO2 antireflection coating in visible light.

Antireflective coatings are widely applied on transparent optical components to reduce reflections at surfaces. Nanoporous silica (NP SiO2) thin films with tailored refractive index properties are used as single-layer antireflective coatings providing nearly zero reflectivity. In this work, light scattering properties of nanoporous silica single-layer antireflective coatings are investigated in order to determine their optical quality by means of total scattering and detailed roughness analysis. Scattering and roughness characterization of the samples coated with different film thicknesses were realized to distinguish the influences of nanopores and surface roughness on scattering losses in the visible (VIS) spectral range. No significant correlation of scattering losses with the film thickness is found, showing negligible influence of the nanopores to the overall scattering properties compared with the dominating effect of interface roughness. Moreover, the scattering losses from coated fused silica glass were observed as low as 20 ppm (0.002%). It is confirmed that NP SiO2 single-layer antireflective coatings are suitable to be used in optics demanding extremely low scattering characteristics.

Optical interference coatings measurement problem 2019 [Invited].

The 2019 Optical Interference Coatings measurement problem comprised the determination of the total backscattering, forward scattering, reflectance, and transmittance spectra of a multilayer system.

Puerariae lobatae root extracts and the regulation of brown fat activity.

BACKGROUND: Obesity is one of the major health problems worldwide. The induction of brown adipocyte formation and activity represents a promising therapeutic option by increasing energy expenditure. Asian herbs have the potential to treat obesity, however, pharmacological effects should be well documented at the molecular level first. HYPOTHESIS: A novel hypothesis-driven screening approach identified the root of Pueraria montana var. lobata (Willd.) Sanjappa & Pradeep (PLR) to have potential effects on obesity by stimulating brown adipocytes. STUDY DESIGN: This study explored the metabolic effects of PLR water extract (PLRE) in a high-fat diet-induced obesity mouse model and characterized its secondary metabolite composition. METHODS: Animals were orally treated daily for two weeks and the bioactivity of PLRE evaluated by measuring various parameters including body weight, circulating metabolites, energy expenditure and insulin sensitivity. The chemical composition of the mains components was obtained by HPLC-MS-ELSD-PDA. Based on the dereplication results and semi-quantitative estimation, pure molecules were selected for tests on adipocytes in vitro. RESULTS: PLRE induces brown adipocyte activity and triggers the formation of brown-like cells in inguinal fat tissue, weight loss, and improved glucose metabolism. These effects are primarily caused by cell-autonomous activation of brown adipocytes and not by autonomic nervous system regulation. Even though the analysis of PLRE revealed puerarin as the most abundant secondary metabolite, it showed no effect on brown adipocyte formation and function. Brown adipocyte activity was induced dose-dependently by two other isoflavones, daidzein, and genistein. Daidzein is present in a very small amount in PLRE, but various glycosidic isoflavones, including puerarin, may release daidzein after metabolism. CONCLUSION: This approach demonstrated the positive effects of PLRE on a diet-induced obesity mouse model and provided clues on the mode of action of PLRE at the molecular level.