Effect of ionization on the behavior of n-eicosanephosphonic acid monolayers at the air/water interface. Experimental determinations and molecular dynamics simulations.

Monolayers of n-eicosanephosphonic acid, EPA, were studied using a Langmuir balance and a Brewster angle microscope at different subphase pH values to change the charge of the polar headgroups (Zav) from 0 to -2. Molecular dynamics simulations (MDS) results for |Zav| = 0, 1, and 2 were compared with the experimental ones. EPA monolayers behave as mixtures of mutually miscible species (C20H41-PO3H2, C20H41-PO3H(-), and C20H41-PO3(2-), depending on the subphase pH). The order and compactness of the monolayers decrease when increasing |Zav|, while go from strongly interconnected by phosphonic-phosphonic hydrogen bonds (|Zav| = 0-0.03) through an equilibrium between the total cohesive energy and the electrostatic repulsion between the charged polar groups (0.03 < |Zav| < 1.6) to an entirely ionic monolayer (|Zav| ≈ 2). MDS reveal for |Zav| = 0 that the chains form spiralled nearly rounded structures induced by the hydrogen-bonded network. When |Zav| ≈ 1 fingering domains were identified. When Z ≈ 2, the headgroups are more disordered and distanced, not only in the xy plane but also in the z direction, forming a rough layer and responding to compression with a large plateau in the isotherm. The monolayers collapse behavior is consistent with the structures and domains founds in the different ionization states and their consequent in-plane rigidity: there is a transition from a solid-like response at low pH subphases to a fluid-like response at high pH subphases. The film area in the close-packed state increases relatively slow when the polar headgroups are able to form hydrogen bonds but increases to near twice that this value when |Zav| ≈ 2. Other nanoscopic properties of monolayers were also determined by MDS. The computational results confirm the experimental findings and offer a nanoscopic perspective on the structure and interactions in the phosphonate monolayers.

Intermediate structures for higher level arrangements: catching disk-like micelles in decane phosphonic acid aqueous solutions.

It has been proposed that disk-like micelles may be precursors to the formation of lamellar liquid crystals. The possibility of obtaining n-decane phosphonic acid (DPA) disk-like micelles in aqueous solution without the addition of a second ionic surfactant led us to study in detail the low-concentration range of this system by both a battery of experimental techniques and molecular dynamics (MD) simulations. The experimental results indicate that premicelles with some capacity to solubilize dyes are formed at 0.05 mM. The critical micelle concentration (cmc) was found to be 0.260 ± 0.023 mM, much lower than that previously reported in the literature. Spherical micelles, which immediately grow, leading to disk-like micelles, are probably formed at this concentration. At 0.454 ± 0.066 mM, disk-like micelles become unstable, giving rise to the formation of an emulsion of lamellar mesophase that dominates the system beyond 0.670 ± 0.045 mM. These experimental results were corroborated by MD simulations which, additionally, allow describing the structure of the obtained micelles at atomic level. The analysis of the MD trajectories revealed the presence of strong intermolecular hydrogen bonds between the surfactant headgroups, producing a compact polar layer with low water content. The formation of such H-bond network could explain the ability of this surfactant to form disk-like micelles at concentrations close to the cmc.

The ascorbyl palmitate-polyethyleneglycol 400-water system phase behavior.

Ascorbyl palmitate (Asc16) in polyethyleneglycol 400 (PEG 400)-water mixtures at weight fractions (w/w) between 0.05 and 1.0 were studied by differential scanning calorimetry (DSC) and polarizing microscopy (PM) at different temperatures. The employed PEG 400-water proportions were: 0-25-50% and 75% of polymer. A complete phase diagram was determined for each PEG 400-water mixture. A cubic mesophase and two (probably three) lamellar mesophases were detected in different regions of the phase diagrams. The addition of PEG 400 to the Asc16-water system shifts the limits of the liquid crystalline domains to lower temperature and surfactant concentration. At weight fraction of PEG 400≥50%, the limits of the domain of existence of cubic mesophase shift to low surfactant concentration compared with water-rich systems. The hydrated crystals are Asc16.2·6H(2)O. If the proportion of water is lower than that value, a mixture of hydrated and anhydrous crystals appears. Heating these crystals produce waxy crystals having melted hydrocarbon bilayers retaining their crystalline structure because the polar bilayers are still rigid.

Synthesis of mesoporous silicas in alkaline and acidic media using the systems cetyltrimethylammonium tosylate (CTAT)-Pluronic F127 triblock copolymer and CTAT-Pluronic F68 triblock copolymer as templates.

Mesoporous silica materials were synthesized in alkaline and acidic media, using cetyltrimethylammonium tosylate (CTAT), Pluronic triblock copolymers F127 and F68, and mixtures of CTAT with each copolymer in order to investigate the effects of pH, surfactant concentration, and CTAT/triblock copolymer molar ratios on the morphology and texture of the synthesized materials. The results show that the kind of mesoporous materials and their pore size can be tuned by changing not only the pH but also the proportion of components and the nature of the copolymer. In alkaline synthesis, microscopic bicontinuous materials are obtained, which are composed by nanoscopic plate-like particles having slit-shaped pores. In acidic synthesis, on the contrary, monolithic silicas are obtained. These materials are also composed by nanoscopic plate-like particles having slit-shaped pores, although in some cases, the microscopic structures are formed by fused spherical particles. The inclusion of the triblock copolymer in the template composition causes a transformation from a bimodal to a monomodal pore size distribution, leading to small and nearly round pores which are probably formed by copolymer or copolymer-CTAT mixed micelles. The differences between the systems synthesized by CTAT-Pluronic F127 and CTAT-Pluronic F68 are explained on the basis of the different interactions between each copolymer and CTAT.

Adsorption of paraquat on mesoporous silica modified with titania: effects of pH, ionic strength and temperature.

The adsorption of the herbicide paraquat (PQ(2+)) on the binary system titania-silica has been studied in batch experiments by performing adsorption isotherms under different conditions of pH, supporting electrolyte concentration, and temperature. Adsorption kinetic on the studied material has also been carried out and discussed. PQ(2+) adsorption is very low on the bare silica surface but important on the composed TiO(2)-SiO(2) adsorbent. In this last case, the adsorption increases by increasing pH and decreasing electrolyte concentration. There are no significant effects of temperature on the adsorption. The increase of the adsorption in TiO(2)-SiO(2) seems to be related to an increase in acid sites of the supported titania and to the homogenously dispersion of the TiO(2) nanoparticles over the silica support. The adsorption takes place by direct binding of PQ(2+) to TiO(2) leading to the formation of surface species of the type SiO(2)-TiO(2)-PQ(2+). Electrostatic interactions and charge-transfer and outer-sphere complexes formations seem to play a key role in the adsorption mechanism. The analysis of thermodynamic parameters suggests that the adsorption on TiO(2)-SiO(2) is endothermic and spontaneous in nature.

Remotion of the antibiotic tetracycline by titania and titania-silica composed materials.

Removal of the antibiotic tetracycline (TC) by TiO(2) and the mesoporous binary system TiO(2)-SiO(2) have been studied in batch experiments by performing adsorption isotherms/kinetics and photodegradation kinetics under different conditions of pH, supporting electrolyte concentration, temperature, adsorbent amount, and TiO(2)-loading. On the one hand, the adsorption of TC on the studied materials is strongly dependent on pH, increasing as pH decreases. The adsorption mechanism, controlled by diffusion processes, is strongly related to electrostatic attractions and H-bond formations mainly between amide, carbonylic and phenolic groups of the antibiotic and the functional groups of TiO(2). The adsorption capacity at constant pH increases in the order TiO(2)

Explanation of experimental results of mixed micelles of homologous surfactants through a MM2 bidimensional modeling.

A computational modeling (in gas phase) to study the disposition of the homologous surfactants in a bidimensional simple model of mixed and homogeneous micelles was performed for the case of R-trimethylammonium bromide surfactants with different linear R lengths from R = C(5) to C(17). First, the bidimensional homogeneous (one component) micelle was modeled, and as a second step, heterogeneous (two components) bidimensional micelles were modeled. The difference in the number of carbon atoms between hydrocarbon chains of the surfactants in the heterogeneous micelles, Δn(C), ranged from 2 to 8. Results were contrasted with experimental data obtained at our own laboratory. The exothermic values of the steric energy changes showed strong attraction between components of homologous surfactants mixture, especially when one of the surfactants has a long chain. It may be argued that the inclusion of a shorter surfactant in the mixture and the twisting of the longer surfactant makes the bidimensional arrangement formation more exothermic. All predictions were in agreement with previous experimental results.

Effect of the concentration and composition on the size and shape of micelles of sodium oleate-cetyltrimethylammonium bromide mixtures.

The dependence of the aggregation number (N(agg)) on composition and concentration of sodium oleate-cetyltrimethylammonium bromide mixed micelles as revealed by cyclic voltammetry experiments shows a complex relationship with the total concentration and the composition of surfactant mixtures. This behavior is related to the evolution with composition of the HLB values and with the composition and the excess free energy of mixed micellization, and is explained by the inclusion of the double bonds of oleate chains in the micellar Stern layers. The increase in size probably leads to a reduction of the micelle surface available for the polar headgroups, causing a reduction in the proportion of double bonds in the hydrocarbon-water interface and a change in the mixed micelle composition. Therefore, the generally held supposition that the composition of mixed micelles does not change with concentration seems rather unrealistic.

Thermodynamic and elastic fluctuation analysis of Langmuir mixed monolayers composed by dehydrocholic acid (HDHC) and didodecyldimethylammonium bromide (DDAB).

The physicochemical and elastic properties of Langmuir mixed monolayers composed by dehydrocholic acid (HDHC) and didodecyldimethylammonium bromide (DDAB) were evaluated. The experiments were performed with a constant surface pressure penetration Langmuir balance based on Axisymmetric Drop Shape Analysis (ADSA). The behavior of such amphiphiles in monolayer was clearly non-ideal and would be seriously influenced by the amount of HDHC molecules present. The presence of bile acid type molecules caused the monolayer be more condensed (A(c) diminution) and the intermolecular attractive interactions be stronger (high epsilon(0) values). This fact would be related to H-bond formation between water and carboxilate and carbonile groups in the cholesteric ring and agreed with the existence of laterally structured microdomains at the monolayer (determined by the analysis of the first virial coefficient, b(0)<1, of the state equation). The miscibility of both surfactants in the monolayer, their high bulk hydrophobicity (pi(c)>35 mJ m(-2)) just with the obtained negative values of the free energy of mixing Delta G(mix), and the excess second virial coefficient (b(1))(E) obtained allows us to infer that net attractive interaction existed between HDHC and DDAB molecules at the monolayer and that mixed systems would be able to be used in the formulation of supramolecular assemblies.

Colloidal properties of amiodarone in water at low concentration.

Amiodarone aqueous systems at concentrations C

Reactive dyes remotion by porous TiO2-chitosan materials.

In this work, the aim was to evaluate the remotion (adsorption plus degradation) of two reactive dyes, Methylene Blue (MB) and Benzopurpurin (BP), from aqueous solutions by the utilization of TiO2-chitosan microporous materials. Two different TiO2-chitosan hybrid materials were synthesized: TiO2-Chit A with 280 mg chitosan/gTiO2 and TiO2-Chit B with 46.76 mg chitosan/g TiO2. Adsorption data obtained at different solution temperatures (25, 35, and 45 degrees C) revealed an irreversible adsorption that decrease with the increment of T. Langmuir, Freundlich and Sips isotherm equation were applied to the experimental data. The obtained parameters and correlation coefficient showed that the adsorption of both dyes on TiO2-Chit A at the three work temperatures was best predicted by the Langmuir isotherm, while Sips equation adjusted better to adsorption data on TiO2-Chit B. The adsorption enthalpy was relatively high and varied with T, indicating that interaction between adsorbent and adsorbate molecules was not only physical but chemical. There is a change in the adsorption heat capacity, (Delta(ads)C(p)<0), related with intense hydrophobic interactions. The kinetic adsorption data were processed by the application of Lagergren and Avrami models. It was found that adsorption of both dyes on both adsorbents under the operating conditions was best predicted by Avrami model. The variation of kinetic order, n, and k(av) with T are related to a pore followed by intra particle diffusion control of the adsorption rate. MB photodegradation on both TiO2-chitosan hybrid materials was of 91 (in A) and 41% (in B) and augmented with the chitosan content. For BP can be seen that the process in darkness resulted in a high remotion capacity than in UV light presence.

Spread mixed monolayers of deoxycholic and dehydrocholic acids at the air-water interface, effect of subphase pH. Characterization by axisymmetric drop shape analysis.

Bile acids (deoxycholic and dehydrocholic acids) spread mixed monolayers behavior at the air/water interface were studied as a function of subphase pH using a constant surface pressure penetration Langmuir balance based on the Axisymmetric Drop Shape Analysis (ADSA). We examined the influence of electrostatic, hydrophobic and hydration forces on the interaction between amphiphilic molecules at the interface by the collapse area values, the thermodynamic parameters and equation of state virial coefficients analysis. The obtained results showed that at neutral (pH=6.7) or basic (pH=10) subphase conditions the collapse areas values are similar to that of cholanoic acid and consistent with the cross-sectional area of the steroid nucleus (approximately 40 A(2)). The Gibbs energy of mixing values (DeltaG(mix)<0) and the first virial coefficients of the equation of state (b(0)<1) indicated that a miscible monolayer with laterally structured microdomains existed. The aggregation number (1/b(0)) was estimated within the order of 6 (pH=6.7) and 3 (pH=10). At pH=3.2, acidic subphase conditions, no phase separation occurs (DeltaG(mix)<0) but a high expanded effect of the monolayer could be noted. The mixed monolayer behavior was no ideal and no aggregates were formed (b(0)> or =1). Such behavior indicates that the polar groups of the molecules interacts each other more strongly by repulsive electrostatic forces than with the more hydrophobic part of the molecule.

Effect of double bonds in the formation of sodium dodecanoate and sodium 10-undecenoate mixed micelles in water.

The micellization of an aqueous mixture of sodium dodecanoate (SDD) and sodium 10-undecenoate (SUD) was studied with the theory of mixed micellization. A strong nonideality was found, with a preferential composition of mixed micelles. This phenomenon was interpreted on the basis of the interaction between the vinyl group and water by hydrogen bonding. The importance of the aliphatic pi electrons and water was stated.

Aqueous sodium dehydrocholate-sodium deoxycholate mixtures at low concentration.

The behavior of the sodium dehydrocholate (NaDHC)-sodium deoxycholate (NaDC) mixed system was studied by a battery of methods that examine effects caused by the different components of the system: monomers, micelles, and both components. The behavior of the mixed micellar system was studied by the application of Rubingh's model. The obtained results show that micellar interaction was repulsive when the aggregates were rich in NaDHC. The gradual inclusion of NaDC in micelles led to a structural transformation in the aggregates and the interaction became attractive. The bile salts' behavior in mixed monolayers at the air-solution interface was also investigated. Mixed monolayers are monotonically rich in NaDC, giving a stable and compact adsorbed layer. Results have shown that the interaction in both micelles and monolayer is not ideal and such behavior is assumed to be due to a structural factor in their hydrocarbon backbone.

Are the mixtures of homologous surfactants ideal?

The interaction between homologous surfactants in mixed micelles was studied by the Regular Solution Theory of mixed micelles. The interaction is independent of the nature of the polar head groups and attractive and the interaction parameter betaM depends linearly on the difference in chain length DeltanC. The interaction becomes ideal at DeltanC=0.75+/-0.06. Above DeltanC approximately 5, the dependence remains linear but the slope increased 2.7 times. The phenomenon is explained as the effect of the reduction of the hydrocarbon/water micelle interface and a better packing of the chains in the micelle core, caused by the inclusion of a shorter homologous surfactants. This reduction can be more effective when DeltanC>or=5.

Mesoporous silica-titania composed materials.

Titania mesosized particles were obtained by TiCl4 hydrolysis in Aerosol OT/water/n-hexane microemulsion. These particles were incorporated in surfactant templated silica mesoporous materials of MCM-41 and MCM-50 structures. Results depended on the surfactant: hexadecyltrimethylammonium bromide templated materials retained the honeycomb structure with small modifications in their characteristics. The dodecyltrimethylammonium bromide templated material changed from honeycomb to lamellar structure when the titania particles were included, with dramatic changes in the structure characteristics. The didodecyldimethylammonium bromide templated lamellar structure was retained after TIO2 inclusion, with a slight increase in the specific area, pore diameter and pore walls thickness.

Adsorption of reactive dyes on titania-silica mesoporous materials.

This paper presents a study on the adsorption of two basic dyes, methylene blue (MB) and rhodamine B (RhB), from aqueous solution onto mesoporous silica-titania materials. The effect of dye structure, adsorbent particle size, TiO(2) presence, and temperature on adsorption was investigated. Adsorption data obtained at different solution temperatures (25, 35, and 45 degrees C) revealed an irreversible adsorption that decreased with the increment of T. The presence of TiO(2) augmented the adsorption capacity (q(e)). This would be due to possible degradation of the dye molecule in contact with the TiO(2) particles in the adsorbent interior. The adsorption enthalpy was relatively high, indicating that interaction between the sorbent and the adsorbate molecules was not only physical but chemical. Both Langmuir and Freundlich isotherm equations were applied to the experimental data. The obtained parameters and correlation coefficients showed that the adsorption of the two reactive dyes (MB and RhB) on the adsorbent systems at the three work temperatures was best predicted by the Langmuir isotherm, but not in all cases. The kinetic adsorption data were processed by the application of two simplified kinetic models, first and second order, to investigate the adsorption mechanism. It was found that the adsorption kinetics of methylene blue and rhodamine B onto the mesoporous silica-titania materials surface under different operating conditions was best described by the first-order model.