Numerical investigation of chemically reacting jet flow of hybrid nanofluid under the significances of bio-active mixers and chemical reaction.

Jet flows are employed in a variety of applications. It can be found in daily life as well as in agriculture, for example, jet flow assists with irrigation and harvest protection. The current problem is related to the study of energy and mass transference on the hybrid nanoliquid flow with mixed convection effect due to the vertical stretching surface conveying the cobalt ferrite CoFe2O4 and titanium dioxide TiO2 nanoparticles (NPs) with the base fluid water H2O. Further, the role of the chemical reaction, heat source/sink, and activation energy are investigated. By exploiting the idea of the modified Buongiorno model, the thermophoretic and Brownian diffusivity effects have discoursed on the existing flow behavior. The existing mathematical problem is framed with the application of the nonlinear higher-order PDEs. Higher-order PDEs of the mathematical model are changed into highly nonlinear ODEs by using the concepts of suitable similarity transformations. The modified higher-order nonlinear ODEs are cracked by manipulating the bvp4c technique in MATLAB. The impacts of the numerous physical flow parameters on the velocity, energy, and concentration are computed in graphical forms. Key findings from the present problem revealed that the velocity of the nanoliquid and hybrid nanofluid decreased due to greater nanoparticles volume fraction. Furthermore, the heat transportation is greater for mixed convection and thermophoresis parameter.

Darcy Forchheimer flow of CMC-water based hybrid nanofluid due to a rotating stretchable disk.

The flow of fluid over a spinning disk has a broad scope of numerous applications. It is employed in various things, including medical equipment, the braking system of cars, gas turbines, plastic films, and glass production. As a result of these applications, we considered the phenomena of Darcy Forchheimer's three-dimensional flow on TiO2-Fe3O4 nanoparticles suspended in based CMC-water fluid. The influence of thermal radiation and convective conditions is studied. Moreover, the Buongiorno model is utilized to compute the Brownian motion and the thermophoretic effect. To generate the non-dimensionalized governing equations, suitable alterations are put into use. These equations are then utilized with Matlab BVP4c. Graphs are used to analyze the behavior of velocity distributions, and thermal and concentration profiles at different parameter values. In addition, the solutions to the flow problem have been analyzed in terms of several other physical variables on velocity, temperature, concentration, drag force, heat, and mass transfer. According to the findings, it is clear that an escalates in the value of the rotation parameter leads to an increase in the radial velocity and axial velocity. In contrast, an opposite pattern is followed in the Forchheimer number. Finally, some engineering quantities are evaluated numerically and presented in tabular forms.

Analysis of the Time-Dependent magnetohydrodynamic Newtonian fluid flow over a rotating sphere with thermal radiation and chemical reaction.

This article presents the magnetohydrodynamic (MHD) flow of a nanoliquid due to a rotating sphere at a stagnation point. The flow is considered to be influenced by the magnetic field, dissipative, thermally radiative, and chemically reactive. Also, the thermophoretic and Brownian motion influences are taken into consideration. Some restrictions in the present analysis are taken: like there is no-slip and convective conditions, joule heating, Hall effects and buoyancy-driven. The solution of the present analysis is derived through the homotopy analysis method (HAM). The significance of several physical parameters on velocities, thermal and concentration profiles are shown with the help of Figures. Also, the significance of different physical factors on skin frictions, local Nusselt number and Sherwood number are demonstrated with the help of Tables. The outcomes show that the Nusselt number is lower for the larger Brownian motion parameter, Eckert number, and thermophoretic parameter, while the increment in the thermal radiation parameter augmented the Nusselt number. It is established that the increasing rotation, magnetic and positive constant parameters have increased the velocity profiles along the x-direction while reducing the velocity profiles along the z-direction of the nanoliquid flow. The increasing positive constant parameter reduces the thermal graph of the nanoliquid flow. Furthermore, the intensifying Eckert number, thermophoresis, Brownian motion, and thermal radiation factor have escalated the thermal profiles of the nanoliquid flow.

A fractional model of magnetohydrodynamics Oldroyd-B fluid with couple stresses, heat and mass transfer: A comparison among Non-Newtonian fluid models.

The present article aims to extend some of the already existing fluid models to a large class of fluids namely, "Oldroyd-B couple stress fluid (OBCSF)". The main focus of the present work is to combine the existing fluid models in ordered to get a new class of fluid. The unsteady magnetohydrodynamics (MHD) Oldroyd-B fluid (OBF) with couple stresses, porosity, heat and mass transfer is considered in the present analysis. The Oldroyd-B couple stress fluid is assumed to flow in channel. The classical model is fractionalized by considering Atangana-Baleanu (AB) operator in ordered to highlight the memory analysis. To develop closed form solutions the combined (Laplace + Fourier) integrals have been used. The results obtained are portrayed through graphs for all pertinent flow parameters which involved in the present dynamic model. Moreover, the impact of AB time fractional parameter is investigated graphically on flow, temperature and concentration distributions exploiting MATHCAD software. Secondly, for better understanding the present solutions of Oldroyd-B couple stress fluid (OBCSF) are reduced to Odroyd-B fluid (OBF) without couple stresses, Maxwell solutions, Couple stress solutions and Newtonian viscous fluid solutions and the results have been compared for classical and fractional order derivatives. In addition to this a limiting case is carried out by our solutions to already published work which verify our solutions. In addition to this during the analysis we noticed that the flow heat and concentrated get lowered for the escalating numerical values of AB fractional derivatives. Similarly, it is also noticed that the velocity in channel accelerated with the increment of numeric values of pressure, porosity, thermal buoyancy and relaxation time parameter. In the same manner temperature and concertation profiles gets low with the higher values of Prandtl number, Reynold number and fractional operator. Finally, skin friction for momentum equation, Nusselt number for temperature and Sherwood number for concentration have been calculated and given in tabular forms.

A theoretical analysis of the ternary hybrid nanofluid flows over a non-isothermal and non-isosolutal multiple geometries.

The current problem is concerned with the study of magnetohydrodynamic ternary hybrid nanofluid flow over two distinct geometries i.e., cone and wedge. The ternary hybrid nanoliquid with MHD has a lot of engineering and industrial applications. In polymer data processing, cone and wedge geometries are frequently utilized. Therefore, the present problem is designed to the flow of ternary hybrid nanoliquid over multiple geometries. Hybrid nanoliquids performed well in the heat transport rate as compared to the nanoliquid and conventional liquid. Here in this study, the idea of ternary hybrid nanoliquid is introduced to improve the energy and mass transmissions which show more satisfactory results in the thermal and mass transmission performance. The impacts of chemical reaction and thermal radiation are also executed in this model. The formulation of the present study is performed in the form of PDEs which are then transformed into the ODEs by using suitable similarity transformations. The homotopic analysis scheme is implemented for the semi-analytical solution of the existing model. Some major results that materialize from the present simplification are that; the tri-hybrid nanoliquid velocity is greater for the rising nanoparticles volume fractions. The enlargement in radiation parameter enlarged the tri-hybrid nanoliquid thermal profile. The mass transfer rate of the ternary hybrid nanoliquid is lesser for the Schmidt number and chemical reaction. Intensification in nanoparticles volume fractions and radiation parameter has increased the ternary hybrid nanofluid heat rate transfer for both cone and wedge geometries.

A comparative analysis of the time-dependent magnetized blood-based nanofluids flows over a stretching cylinder.

This article explores the analysis of magnetized blood-based nanofluids flows over an extending cylinder. The nanofluid contains copper, copper oxide and iron oxide nanoparticles which are mixed with blood. The mathematical model has been built-up in partial differential equations (PDEs) form and then changed into ordinary different equations by mean of suitable similarity variables and then has been evaluated by homotopy analysis method (HAM). The convergence of the applied technique is presented in graphical form. During the solution process, the influences of physical parameters like magnetic parameter, unsteadiness parameter, curvature parameter and thermal relaxation time parameter on the flow profiles have been investigated and depicted in Figures and Tables. The correctness of the present model has also been presented in tabular form. The results show that the greater curvature factor reduces the radius of cylinder due to which thickness of layer becomes thin at the boundaries and therefore the velocity distribution declines, while the greater curvature parameter has the increasing impact on the temperature distribution for constant wall temperature (CWT) case and decreases the temperature distribution for prescribed surface temperature (PST) case.

The global convergence of spectral RMIL conjugate gradient method for unconstrained optimization with applications to robotic model and image recovery.

In 2012, Rivaie et al. introduced RMIL conjugate gradient (CG) method which is globally convergent under the exact line search. Later, Dai (2016) pointed out abnormality in the convergence result and thus, imposed certain restricted RMIL CG parameter as a remedy. In this paper, we suggest an efficient RMIL spectral CG method. The remarkable feature of this method is that, the convergence result is free from additional condition usually imposed on RMIL. Subsequently, the search direction is sufficiently descent independent of any line search technique. Thus, numerical experiments on some set of benchmark problems indicate that the method is promising and efficient. Furthermore, the efficiency of the proposed method is demonstrated on applications arising from arm robotic model and image restoration problems.

Scrutinization of second law analysis and viscous dissipation on Reiner-RivlinNanofluid with the effect of bioconvection over a rotating disk.

In comparison to Newtonian fluids, non-Newtonian fluids have fascinating features in heat transportation. Here, newly type of Reiner-Rivlinnanoliquid flow over the revolving disk for viscous dissipation (VD) is being explored in a multiple-slip effect. The inclusion of gyrotactic microorganisms in the nanoliquid enhances the tendency of the nanoparticles. The idea of the intended model is enhanced by considering in the impact of activation energy, thermal radiative, heated convective conditions and entropy minimization. The system of nonlinear PDE is constructed into nonlinear ODE's by applying the von-Karman similarity method and later solved numerically using the BVP4c solver which is considered to study the complicated ordinary differential equations. TheInfluence of various parameters is elaborated and plotted physically through the graphical illustration. By contrasting the reported data in the restricted form to a previously published article, the accuracy of the current model has examined. The impact of a non-Newtonian fluid parameter over the velocity field appeared to showdpreciation in it. The results elucidate that when the wall slip coefficient is larger more torque is needed to maintain constant disk revaluation. Surface heat transmission and wall skin friction are computed for a wide variety of factors. These flows have several real world-applications, including modeling cases that occur in oceanography and geophysics, various industrial fields (such as lumber production).