ABSTRACT
Objectives: In general, a terminology shared and agreed by different stakeholders is important to facilitate communication and cooperation. This holds true in the field of vascular ageing for the benefit of global cardiovascular health. The need to promote a common language and understanding across this area was recognised by VascAgeNet, a collaborative network with relevant and diverse expertise in the vascular ageing field, supported by the European Cooperation in Science and Technology. To contribute to the spread of unified terms in the vascular ageing field, a glossary was created by VascAgeNet and this paper describes the systematic process used for its development. Methods: An initial list of terms and preliminary definitions were collated from the network. A dedicated team was created to design the glossary development process, to facilitate its implementation and to maximise outreach and dissemination. The key steps of the process were to determine: (1) the target audience; (2) a list of priority terms; (3) a template structure for definitions; (4) methods for collecting feedback and (5) the dissemination plan. Results: An implementation strategy was provided for each key step and shared within the network; main decisions were agreed by all members of the glossary team. Small groups of definitions were released on a regular basis within a pilot phase including 19 terms (status: 05.09.2023) that were published openly at https://vascagenet.eu/official-glossary. Conclusions: The strategy for creating the first Vascular Ageing Glossary has been successfully designed and developed within VascAgeNet. A pilot phase covering the first publicly available terms was completed. The glossary is a living document, available to the scientific community, which aims to unify the vascular ageing language. Supplementary Information: The online version contains supplementary material available at 10.1007/s44200-023-00041-5.
ABSTRACT
BACKGROUND: Carotid-femoral pulse wave velocity (cfPWV) is the gold standard for noninvasive arterial stiffness assessment, an independent predictor of cardiovascular disease, and a potential parameter to guide therapy. However, cfPWV is not routinely measured in clinical practice due to the unavailability of a low-cost, operator-friendly, and independent device. The current study validated a novel laser Doppler vibrometry (LDV)-based measurement of cfPWV against the reference technique. METHODS: In 100 (50 men) hypertensive patients, cfPWV was measured using applanation tonometry (Sphygmocor) and the novel LDV device. This device has 2 handpieces with 6 laser beams each that simultaneously measure vibrations from the skin surface at carotid and femoral sites. Pulse wave velocity is calculated using ECG for the identification of cardiac cycles. An ECG-independent method was also devised. Cardiovascular risk score was calculated for patients between 40 and 75 years old using the WHO risk scoring chart. RESULTS: LDV-based cfPWV correlated significantly with tonometry (r=0.86, P<0.0001 ECG-dependent [cfPWVLDV_ECG] and r=0.80, P<0.001 ECG-independent [cfPWVLDV_w/oECG] methods). Bland-Altman analysis showed nonsignificant bias (0.65 m/s) and acceptable SD (1.27 m/s) between methods. Intraobserver coefficient of variance for LDV was 4.7% (95% CI, 3.0%-5.5%), and interobserver coefficient of variance was 5.87%. CfPWV correlated significantly with CVD risk (r=0.64, P<0.001; r=0.41, P=0.003; and r=0.37, P=0.006 for tonometry, LDV-with, and LDV-without ECG, respectively). CONCLUSIONS: The study demonstrates clinical validity of the LDV device. The LDV provides a simple, noninvasive, operator-independent method to measure cfPWV for assessing arterial stiffness, comparable to the standard existing techniques. REGISTRATION: URL: https://clinicaltrials.gov/study/NCT03446430; Unique identifier: NCT03446430.
Subject(s)
Carotid-Femoral Pulse Wave Velocity , Vascular Stiffness , Adult , Aged , Female , Humans , Male , Middle Aged , Cardiovascular Diseases/physiopathology , Cardiovascular Diseases/diagnosis , Carotid Arteries/physiopathology , Carotid-Femoral Pulse Wave Velocity/methods , Femoral Artery/physiopathology , Hypertension/physiopathology , Hypertension/diagnosis , Manometry/methods , Manometry/instrumentation , Pulse Wave Analysis/methods , Pulse Wave Analysis/instrumentation , Reproducibility of Results , Vascular Stiffness/physiology , VibrationABSTRACT
Chiari type 1 malformation is a neurological disorder characterized by an obstruction of the cerebrospinal fluid (CSF) circulation between the brain (intracranial) and spinal cord (spinal) compartments. Actions such as coughing might evoke spinal cord complications in patients with Chiari type 1 malformation, but the underlying mechanisms are not well understood. More insight into the impact of the obstruction on local and overall CSF dynamics can help reveal these mechanisms. Therefore, our previously developed computational fluid dynamics framework was used to establish a subject-specific model of the intracranial and upper spinal CSF space of a healthy control. In this model, we emulated a single cough and introduced porous zones to model a posterior (OBS-1), mild (OBS-2), and severe posterior-anterior (OBS-3) obstruction. OBS-1 and OBS-2 induced minor changes to the overall CSF pressures, while OBS-3 caused significantly larger changes with a decoupling between the intracranial and spinal compartment. Coughing led to a peak in overall CSF pressure. During this peak, pressure differences between the lateral ventricles and the spinal compartment were locally amplified for all degrees of obstruction. These results emphasize the effects of coughing and indicate that severe levels of obstruction lead to distinct changes in intracranial pressure.
Subject(s)
Arnold-Chiari Malformation , Cerebrospinal Fluid , Cough , Hydrodynamics , Arnold-Chiari Malformation/cerebrospinal fluid , Arnold-Chiari Malformation/physiopathology , Arnold-Chiari Malformation/complications , Cough/physiopathology , Humans , Computer Simulation , Cerebrospinal Fluid Pressure/physiology , Spinal Cord/physiopathology , FemaleABSTRACT
OBJECTIVE: In young patients, aortic valve disease is often treated by placement of a pulmonary autograft (PA) which adapts to its new environment through growth and remodeling. To better understand the hemodynamic forces acting on the highly distensible PA in the acute phase after surgery, we developed a fluid-structure interaction (FSI) framework and comprehensively compared hemodynamics and wall shear-stress (WSS) metrics with a computational fluid dynamic (CFD) simulation. METHODS: The FSI framework couples a prestressed non-linear hyperelastic arterial tissue model with a fluid model using the in-house coupling code CoCoNuT. Geometry, material parameters and boundary conditions are based on in-vivo measurements. Hemodynamics, time-averaged WSS (TAWSS), oscillatory shear index (OSI) and topological shear variation index (TSVI) are evaluated qualitatively and quantitatively for 3 different sheeps. RESULTS: Despite systolic-to-diastolic volumetric changes of the PA in the order of 20 %, the point-by-point correlation of TAWSS and OSI obtained through CFD and FSI remains high (r > 0.9, p < 0.01) for TAWSS and (r > 0.8, p < 0.01) for OSI). Instantaneous WSS divergence patterns qualitatively preserve similarities, but large deformations of the PA leads to a decrease of the correlation between FSI and CFD resolved TSVI (r < 0.7, p < 0.01). Moderate co-localization between FSI and CFD is observed for low thresholds of TAWSS and high thresholds of OSI and TSVI. CONCLUSION: FSI might be warranted if we were to use the TSVI as a mechano-biological driver for growth and remodeling of PA due to varying intra-vascular flow structures and near wall hemodynamics because of the large expansion of the PA.
Subject(s)
Hemodynamics , Models, Cardiovascular , Pulmonary Artery , Hemodynamics/physiology , Pulmonary Artery/physiology , Pulmonary Artery/physiopathology , Hydrodynamics , Animals , Humans , Computer Simulation , Pulmonary Valve/surgery , Pulmonary Valve/physiology , Autografts , Stress, MechanicalABSTRACT
BACKGROUND: Tendinopathy alters the compositional properties of the Achilles tendon by increasing fluid and glycosaminoglycan content. It has been speculated that these changes may affect intratendinous pressure, but the extent of this relationship remains unclear. Therefore, we aimed to investigate the impact of elevated fluid and glycosaminoglycan content on Achilles tendon intratendinous pressure and to determine whether hyaluronidase (HYAL) therapy can intervene in this potential relationship. METHODS: Twenty paired fresh-frozen cadaveric Achilles tendons were mounted in a tensile-testing machine and loaded up to 5% strain. Intratendinous resting (at 0% strain) and dynamic pressure (at 5% strain) were assessed using the microcapillary infusion technique. First, intratendinous pressure was measured under native conditions before and after infusion of 2 mL physiological saline. Next, 80 mg of glycosaminoglycans were administered bilaterally to the paired tendons. The right tendons were additionally treated with 1500 units of HYAL. Finally, both groups were retested, and the glycosaminoglycan content was analyzed. RESULTS: It was found that both elevated fluid and glycosaminoglycan content resulted in higher intratendinous resting and dynamic pressures (pâ¯<â¯0.001). HYAL treatment induced a 2.3-fold reduction in glycosaminoglycan content (pâ¯=â¯0.002) and restored intratendinous pressures. CONCLUSION: The results of this study demonstrated that elevated fluid and glycosaminoglycan content in Achilles tendinopathy contribute to increased intratendinous resting and dynamic pressures, which can be explained by the associated increased volume and reduced permeability of the tendon matrix, respectively. HYAL degrades glycosaminoglycans sufficiently to lower intratendinous pressures and may, therefore, serve as a promising treatment.
Subject(s)
Achilles Tendon , Glycosaminoglycans , Hyaluronoglucosaminidase , Pressure , Tendinopathy , Achilles Tendon/metabolism , Humans , Tendinopathy/metabolism , Glycosaminoglycans/metabolism , Glycosaminoglycans/analysis , Hyaluronoglucosaminidase/metabolism , Male , Middle Aged , Female , Cadaver , Aged , Adult , Tensile StrengthABSTRACT
Central aortic diastolic pressure decay time constant ( τ ) is according to the two-element Windkessel model equal to the product of total peripheral resistance ( R ) times total arterial compliance ( C ). As such, it is related to arterial stiffness, which has considerable pathophysiological relevance in the assessment of vascular health. This study aimed to investigate the relationship of the constant τ with the product T MBP cPP , given by heart period ( T ) times the ratio of mean blood pressure (MBP) to central pulse pressure ( cPP ). The relationship was derived by performing linear fitting on an in silico population of n1 = 3818 virtual subjects, and was subsequently evaluated on in vivo data (n2 = 2263) from the large Asklepios study. The resulted expression was found to be τ = k ' T MBP cPP , with k ' = 0.7 (R2 = 0.9). The evaluation of the equation on the in vivo human data reported high agreement between the estimated and reference τ values, with a correlation coefficient equal to 0.94 and a normalized RMSE equal to 5.5%. Moreover, the analysis provided evidence that the coefficient k ' is age- and gender-independent. The proposed formula provides novel theoretical insights in the relationship between τ and central blood pressure features. In addition, it may allow for the evaluation of τ without the need for acquiring the entire central blood pressure wave, especially when an approximation of the cPP is feasible. This study adds to the current literature by contributing to the accessibility of an additional biomarker, such as the central diastolic pressure decay time constant, for the improved assessment of vascular ageing.
Subject(s)
Arteries , Vascular Stiffness , Humans , Blood Pressure/physiology , Arteries/physiology , Aorta/physiology , Arterial Pressure , Vascular ResistanceABSTRACT
The advent of high-frame rate imaging in ultrasound allowed the development of shear wave elastography as a noninvasive alternative for myocardial stiffness assessment. It measures mechanical waves propagating along the cardiac wall with speeds that are related to stiffness. The use of cardiac shear wave elastography in clinical studies is increasing, but a proper understanding of the different factors that affect wave propagation is required to correctly interpret results because of the heart's thin-walled geometry and intricate material properties. The aims of this review are to give an overview of the general concepts in cardiac shear wave elastography and to discuss in depth the effects of age, hemodynamic loading, cardiac morphology, fiber architecture, contractility, viscoelasticity, and system-dependent factors on the measurements, with a focus on clinical application. It also describes how these factors should be considered during acquisition, analysis, and reporting to ensure an accurate, robust, and reproducible measurement of the shear wave.
Subject(s)
Cardiology , Elasticity Imaging Techniques , Humans , Predictive Value of Tests , Ultrasonography , MyocardiumABSTRACT
Objective. An elevated interstitial fluid pressure (IFP) can lead to strain-induced stiffening of poroelastic biological tissues. As shear wave elastography (SWE) measures functional tissue stiffness based on the propagation speed of acoustically induced shear waves, the shear wave velocity (SWV) can be used as an indirect measurement of the IFP. The underlying biomechanical principle for this stiffening behavior with pressurization is however not well understood, and we therefore studied how IFP affects SWV through SWE experiments and numerical modeling.Approach. For model set-up and verification, SWE experiments were performed while dynamically modulating IFP in a chicken breast. To identify the confounding factors of the SWV-IFP relationship, we manipulated the material model (linear poroelastic versus porohyperelastic), deformation assumptions (geometric linearity versus nonlinearity), and boundary conditions (constrained versus unconstrained) in a finite element model mimicking the SWE experiments.Main results. The experiments demonstrated a statistically significant positive correlation between the SWV and IFP. The model was able to reproduce a similar SWV-IFP relationship by considering an unconstrained porohyperelastic tissue. Material nonlinearity was identified as the primary factor contributing to this relationship, whereas geometric nonlinearity played a smaller role. The experiments also highlighted the importance of the dynamic nature of the pressurization procedure, as indicated by a different observed SWV-IFP for pressure buildup and relaxation, but its clinical relevance needs to be further investigated.Significance. The developed model provides an adaptable framework for SWE of poroelastic tissues and paves the way towards non-invasive measurements of IFP.
Subject(s)
Elasticity Imaging Techniques , Elasticity Imaging Techniques/methods , Extracellular Fluid/diagnostic imagingABSTRACT
Personalized treatment informed by computational models has the potential to markedly improve the outcome for patients with a type B aortic dissection. However, existing computational models of dissected walls significantly simplify the characteristic false lumen, tears and/or material behavior. Moreover, the patient-specific wall thickness and stiffness cannot be accurately captured non-invasively in clinical practice, which inevitably leads to assumptions in these wall models. It is important to evaluate the impact of the corresponding uncertainty on the predicted wall deformations and stress, which are both key outcome indicators for treatment optimization. Therefore, a physiology-inspired finite element framework was proposed to model the wall deformation and stress of a type B aortic dissection at diastolic and systolic pressure. Based on this framework, 300 finite element analyses, sampled with a Latin hypercube, were performed to assess the global uncertainty, introduced by 4 uncertain wall thickness and stiffness input parameters, on 4 displacement and stress output parameters. The specific impact of each input parameter was estimated using Gaussian process regression, as surrogate model of the finite element framework, and a δ moment-independent analysis. The global uncertainty analysis indicated minor differences between the uncertainty at diastolic and systolic pressure. For all output parameters, the 4th quartile contained the major fraction of the uncertainty. The parameter-specific uncertainty analysis elucidated that the material stiffness and relative thickness of the dissected membrane were the respective main determinants of the wall deformation and stress. The uncertainty analysis provides insight into the effect of uncertain wall thickness and stiffness parameters on the predicted deformation and stress. Moreover, it emphasizes the need for probabilistic rather than deterministic predictions for clinical decision making in aortic dissections.
Subject(s)
Aorta , Aortic Dissection , Humans , Uncertainty , Blood Pressure , Models, Cardiovascular , Stress, MechanicalABSTRACT
Vascular corrosion casting is a method used to visualize the three dimensional (3D) anatomy and branching pattern of blood vessels. A polymer resin is injected in the vascular system and, after curing, the surrounding tissue is removed. The latter often deforms or even fractures the fragile cast. Here, a method is proposed that does not require corrosion, and is based on in situ micro computed tomography (micro-CT) scans. To overcome the lack of CT contrast between the polymer cast and the animals' surrounding soft tissue, hafnium oxide nanocrystals (HfO2 NCs) are introduced as CT contrast agents into the resin. The NCs dramatically improve the overall CT contrast of the cast and allow for straightforward segmentation in the CT scans. Careful design of the NC surface chemistry ensures the colloidal stability of the NCs in the casting resin. Using only 5 m% of HfO2 NCs, high-quality cardiovascular casts of both zebrafish and mice can be automatically segmented using CT imaging software. This allows to differentiate even µ $\umu$ m-scale details without having to alter the current resin injection methods. This new method of virtual dissection by visualizing casts in situ using contrast-enhanced CT imaging greatly expands the application potential of the technique.
ABSTRACT
BACKGROUND: Arterial stiffness, as measured by arterial pulse wave velocity (PWV), is an established biomarker for cardiovascular risk and target-organ damage in individuals with hypertension. With the emergence of new devices for assessing PWV, it has become evident that some of these devices yield results that display significant discrepancies compared with previous devices. This discrepancy underscores the importance of comprehensive validation procedures and the need for international recommendations. METHODS: A stepwise approach utilizing the modified Delphi technique, with the involvement of key scientific societies dedicated to arterial stiffness research worldwide, was adopted to formulate, through a multidisciplinary vision, a shared approach to the validation of noninvasive arterial PWV measurement devices. RESULTS: A set of recommendations has been developed, which aim to provide guidance to clinicians, researchers, and device manufacturers regarding the validation of new PWV measurement devices. The intention behind these recommendations is to ensure that the validation process can be conducted in a rigorous and consistent manner and to promote standardization and harmonization among PWV devices, thereby facilitating their widespread adoption in clinical practice. CONCLUSIONS: It is hoped that these recommendations will encourage both users and developers of PWV measurement devices to critically evaluate and validate their technologies, ultimately leading to improved consistency and comparability of results. This, in turn, will enhance the clinical utility of PWV as a valuable tool for assessing arterial stiffness and informing cardiovascular risk stratification and management in individuals with hypertension.
Subject(s)
Hypertension , Vascular Stiffness , Humans , Pulse Wave Analysis/methods , Arterial Pressure , Hypertension/diagnosis , ArteriesABSTRACT
While transitioning from the acute to chronic phase, the wall of a dissected aorta often expands in diameter and adaptations in thickness and microstructure take place in the dissected membrane. Including the mechanisms, leading to these changes, in a computational model is expected to improve the accuracy of predictions of the long-term complications and optimal treatment timing of dissection patients. An idealized dissected wall was modeled to represent the elastin and collagen production and/or degradation imposed by stress- and inflammation-mediated growth and remodeling, using the homogenized constrained mixture theory. As no optimal growth and remodeling parameters have been defined for aortic dissections, a Latin hypercube sampling with 1000 parameter combinations was assessed for four inflammation patterns, with a varying spatial extent (full/local) and temporal evolution (permanent/transient). The dissected membrane thickening and microstructure was considered together with the diameter expansion over a period of 90 days. The highest success rate was found for the transient inflammation patterns, with about 15% of the samples leading to converged solutions after 90 days. Clinically observed thickening rates were found for 2-4% of the transient inflammation samples, which represented median total diameter expansion rates of about 5 mm/year. The dissected membrane microstructure showed an elastin decrease and, in most cases, a collagen increase. In conclusion, the model with the transient inflammation pattern allowed the reproduction of clinically observed dissected membrane thickening rates, diameter expansion rates and adaptations in microstructure, thus providing guidance in reducing the parameter space in growth and remodeling models of aortic dissections.
Subject(s)
Aortic Aneurysm, Thoracic , Aortic Dissection , Humans , Aorta, Thoracic , Aorta , Inflammation , Elastin , CollagenABSTRACT
Pulse-wave velocity (PWV) can be used to quantify arterial stiffness, allowing for a diagnosis of this condition. Multi-beam laser-doppler vibrometry offers a cheap, non-invasive and user-friendly alternative to measuring PWV, and its feasibility has been previously demonstrated in the H2020 project CARDIS. The two handpieces of the prototype CARDIS device measure skin displacement above main arteries at two different sites, yielding an estimate of the pulse-transit time (PTT) and, consequently, PWV. The presence of multiple beams (channels) on each handpiece can be used to enhance the underlying signal, improving the quality of the signal for PTT estimation and further analysis. We propose two methods for multi-channel LDV data processing: beamforming and beamforming-driven ICA. Beamforming is done by an SNR-weighted linear combination of the time-aligned channels, where the SNR is blindly estimated from the signal statistics. ICA uses the beamformer to resolve its inherent permutation and scale ambiguities. Both methods yield a single enhanced signal at each handpiece, where spurious peaks in the individual channels as well as stochastic noise are well suppressed in the output. Using the enhanced signals yields individual PTT estimates with a low spread compared to the baseline approach. While the enhancement is introduced in the context of PTT estimation, the approaches can be used to enhance signals in other biomedical applications of multi-channel LDV as well.
Subject(s)
Carotid Arteries , Pulse Wave Analysis , Carotid Arteries/diagnostic imaging , Ultrasonography, Doppler , Heart Function Tests , LasersABSTRACT
INTRODUCTION: In vivo estimation of material properties of arterial tissue can provide essential insights into the development and progression of cardiovascular diseases. Furthermore, these properties can be used as an input to finite element simulations of potential medical treatments. MATERIALS AND METHODS: This study uses non-invasively measured pressure, diameter and wall thickness of human common carotid arteries (CCAs) acquired in 103 healthy subjects. A non-linear optimization was performed to estimate material parameters of two different constitutive models: a phenomenological, isotropic model and a structural, anisotropic model. The effect of age, sex, body mass index and blood pressure on the parameters was investigated. RESULTS AND CONCLUSION: Although both material models were able to model in vivo arterial behaviour, the structural model provided more realistic results in the supra-physiological domain. The phenomenological model predicted very high deformations for pressures above the systolic level. However, the phenomenological model has fewer parameters that were shown to be more robust. This is an advantage when only the physiological domain is of interest. The effect of stiffening with age, BMI and blood pressure was present for women, but not always for men. In general, sex had the biggest effect on the mechanical properties of CCAs. Stiffening trends with age, BMI and blood pressure were present but not very strong. The intersubject variability was high. Therefore, it can be concluded that finding a representative set of parameters for a certain age or BMI group would be very challenging. Instead, for purposes of patient-specific modelling of surgical procedures, we currently advise the use of patient-specific parameters.
Subject(s)
Cardiovascular Diseases , Sex Characteristics , Humans , Female , Male , Carotid Artery, Common/physiology , Blood Pressure/physiology , Carotid Arteries/physiologyABSTRACT
High-frequency cardiac ultrasound is the only well-established method to characterize in vivo cardiovascular function in adult zebrafish noninvasively. Pulsed-wave Doppler imaging allows measurements of blood flow velocities at well-defined anatomical positions, but the measurements and results obtained using this technique need to be analyzed carefully, taking into account the substantial baseline variability within one recording and the possibility for operator bias. To address these issues and to increase throughput by limiting hands-on analysis time, we have developed a fully automated processing pipeline. This framework enables the fast, unbiased analysis of all cardiac cycles in a zebrafish pulsed-wave Doppler recording of both atrioventricular valve flow as well as aortic valve flow without operator-dependent inputs. Applying this automated pipeline to a large number of recordings from wild-type zebrafish shows a strong agreement between the automated results and manual annotations performed by an experienced operator. The reference data obtained from this analysis showed that the early wave peak during ventricular inflow is lower for female compared with male zebrafish. We also found that the peaks of the ventricular inflow and outflow waves as well as the peaks of the regurgitation waves are all correlated positively with body surface area. In general, the presented reference data, as well as the automated Doppler measurement processing tools developed and validated in this study will facilitate future (high-throughput) cardiovascular phenotyping studies in adult zebrafish ultimately leading to a more comprehensive understanding of human (genetic) cardiovascular diseases.
Subject(s)
Heart , Zebrafish , Animals , Male , Adult , Female , Humans , Zebrafish/physiology , Heart/diagnostic imaging , Echocardiography/methods , Heart Ventricles/diagnostic imaging , Ultrasonography, Doppler , Blood Flow VelocityABSTRACT
Longitudinal motion of the carotid arterial wall, as measured with ultrasound, has shown promise as an indicator of vascular health. The underlying mechanisms are however not fully understood. We have found, in in vivo studies, that blood pressure has a strong relation to the antegrade longitudinal displacement in early systole. Further, we have identified that a tapered geometry and the intramural friction in-between two parts of a vessel wall influence the longitudinal displacement. We therefore studied the interaction between pressure, vessel geometry and intramural friction, tapered and straight ultrasound phantoms in a paralleled hydraulic bench study and corresponding numerical models. Profound antegrade longitudinal motion was induced in the innermost part of both tapered phantoms and the numerical models, but to a lesser extent when intramural friction was increased in the simulations. Strong correlations (R = 0.82-0.96; p < 1e-3; k = 9.3-14 µm/mmHg) between longitudinal displacement and pulse pressure were found in six of seven regions of interest in tapered phantoms. The motion of the straight phantom and the corresponding numerical model was smaller, on average zero or close to zero. This study demonstrates that tapering of the lumen, low intramural friction, and pressure might be important conducive features to the antegrade longitudinal motion of the arterial wall in vivo.
Subject(s)
Carotid Arteries , Friction , Finite Element Analysis , Carotid Arteries/diagnostic imaging , Carotid Arteries/physiology , Ultrasonography , Blood Pressure/physiologyABSTRACT
OBJECTIVE: The zebrafish is increasingly used as a small animal model for cardiovascular disease, including vascular disorders. Nevertheless, a comprehensive biomechanical understanding of the zebrafish cardiovascular circulation is still lacking and possibilities for phenotyping the zebrafish heart and vasculature at adult - no longer optically transparent - stages are limited. To improve these aspects, we developed imaging-based 3D models of the cardiovascular system of wild-type adult zebrafish. METHODS: In vivo high-frequency echocardiography and ex vivo synchrotron X-ray tomography were combined to build fluid-structure interaction finite element models of the fluid dynamics and biomechanics inside the ventral aorta. RESULTS: We successfully generated a reference model of the circulation in adult zebrafish. The dorsal side of the most proximal branching region was found as the location of highest first principal wall stress and was also a location of low wall shear stress. Reynolds number and oscillatory shear were very low compared to mice and humans. SIGNIFICANCE: The presented wild-type results provide a first extensive biomechanical reference for adult zebrafish. This framework can be used for advanced cardiovascular phenotyping of adult genetically engineered zebrafish models of cardiovascular disease, showing disruptions of the normal mechano-biology and homeostasis. By providing reference values for key biomechanical stimuli (including wall shear stress and first principal stress) in wild-type animals, and a pipeline for image-based animal-specific computational biomechanical models, this study contributes to a more comprehensive understanding of the role of altered biomechanics and hemodynamics in heritable cardiovascular pathologies.
Subject(s)
Cardiovascular Diseases , Zebrafish , Adult , Humans , Animals , Mice , Pilot Projects , Synchrotrons , Aorta/diagnostic imaging , Hemodynamics , Tomography, X-Ray Computed , Models, Cardiovascular , Stress, MechanicalABSTRACT
Arterial pulse waves (PWs) such as blood pressure and photoplethysmogram (PPG) signals contain a wealth of information on the cardiovascular (CV) system that can be exploited to assess vascular age and identify individuals at elevated CV risk. We review the possibilities, limitations, complementarity, and differences of reduced-order, biophysical models of arterial PW propagation, as well as theoretical and empirical methods for analyzing PW signals and extracting clinically relevant information for vascular age assessment. We provide detailed mathematical derivations of these models and theoretical methods, showing how they are related to each other. Finally, we outline directions for future research to realize the potential of modeling and analysis of PW signals for accurate assessment of vascular age in both the clinic and in daily life.
Subject(s)
Arteries , Photoplethysmography , Humans , Arteries/physiology , Photoplethysmography/methods , Pulse Wave Analysis , Models, CardiovascularABSTRACT
Determining proper material parameters from clinical data remains a large, though unavoidable, challenge in patient-specific computational cardiovascular modeling. In an attempt to couple the clinical and modelling practice, this study investigated whether pulse wave velocity (PWV), a clinical arterial stiffness measure, can guide in determining appropriate parameter values for the Gasser-Ogden-Holzapfel (GOH) constitutive model. The reduction and uncertainty analysis was demonstrated on a cylindrical descending thoracic aorta model. Starting from discretized ranges of GOH parameters and using a full factorial design, the parameter sets yielding a physiological PWV (3.5-12.5 m/s) at diastolic pressure (80 mmHg; PWV80) were selected and their PWV at dicrotic notch pressure (110 mmHg; PWV110) was determined. These PWV measures were applied to determine the reduction of the 7D GOH parameter space, the 2D subspaces and the remaining uncertainty in case only PWV80 or both measurements are available. The resulting 12,032 parameter sets lead to a 7D parameter space reduction of ≥ 82.5 % using PWV80, which increased to 96.0 % when including PWV110, in particular at 3.5-8.5 m/s. A similar trend was observed for the remaining uncertainty and the 2D subspaces comprised of medial collagen fiber parameters, while scarce reductions were found for the adventitial and elastin parameters. In conclusion, PWV80 and PWV110 are complementary measures with the potential to reduce the GOH parameter space in arterial models, in particular for media- and collagen-related parameters. Moreover, this approach has the advantage that it allows the estimation of the remaining uncertainty after parameter space reduction.
Subject(s)
Pulse Wave Analysis , Vascular Stiffness , Humans , Pulse Wave Analysis/methods , Biomechanical Phenomena , Blood Flow Velocity/physiology , Arteries , Aorta/physiology , Blood Pressure/physiology , Vascular Stiffness/physiologyABSTRACT
BACKGROUND: The lack of reliable echocardiographic techniques to assess diastolic function in children is a major clinical limitation. Our aim was to develop and validate the intraventricular pressure difference (IVPD) calculation using blood speckle-tracking (BST) and investigate the method's potential role in the assessment of diastolic function in children. METHODS: Blood speckle-tracking allows two-dimensional angle-independent blood flow velocity estimation. Blood speckle-tracking images of left ventricular (LV) inflow from the apical 4-chamber view in 138 controls, 10 patients with dilated cardiomyopathies (DCMs), and 21 patients with hypertrophic cardiomyopathies (HCMs) <18 years of age were analyzed to study LV IVPD during early diastole. Reproducibility of the IVPD analysis was assessed, IVPD estimates from BST and color M mode were compared, and the validity of the BST-based IVPD calculations was tested in a computer flow model. RESULTS: Mean IVPD was significantly higher in controls (-2.28 ± 0.62 mm Hg) compared with in DCM (-1.21 ± 0.39 mm Hg, P < .001) and HCM (-1.57 ± 0.47 mm Hg, P < .001) patients. Feasibility was 88.3% in controls, 80% in DCM patients, and 90.4% in HCM patients. The peak relative negative pressure occurred earlier at the apex than at the base and preceded the peak E-wave LV filling velocity, indicating that it represents diastolic suction. Intraclass correlation coefficients for intra- and interobserver variability were 0.908 and 0.702, respectively. There was a nonsignificant mean difference of 0.15 mm Hg between IVPD from BST and color M mode. Estimation from two-dimensional velocities revealed a difference in peak IVPD of 0.12 mm Hg (6.6%) when simulated in a three-dimensional fluid mechanics model. CONCLUSIONS: Intraventricular pressure difference calculation from BST is highly feasible and provides information on diastolic suction and early filling in children with heart disease. Intraventricular pressure difference was significantly reduced in children with DCM and HCM compared with controls, indicating reduced early diastolic suction in these patient groups.