The Role of αvß3 Integrin in Cancer Therapy Resistance.

A relevant challenge for the treatment of patients with neoplasia is the development of resistance to chemo-, immune-, and radiotherapies. Although the causes of therapy resistance are poorly understood, evidence suggests it relies on compensatory mechanisms that cells develop to replace specific intracellular signaling that should be inactive after pharmacological inhibition. One such mechanism involves integrins, membrane receptors that connect cells to the extracellular matrix and have a crucial role in cell migration. The blockage of one specific type of integrin is frequently compensated by the overexpression of another integrin dimer, generally supporting cell adhesion and migration. In particular, integrin αvß3 is a key receptor involved in tumor resistance to treatments with tyrosine kinase inhibitors, immune checkpoint inhibitors, and radiotherapy; however, the specific inhibition of the αvß3 integrin is not enough to avoid tumor relapse. Here, we review the role of integrin αvß3 in tumor resistance to therapy and the mechanisms that have been proposed thus far. Despite our focus on the αvß3 integrin, it is important to note that other integrins have also been implicated in drug resistance and that the collaborative action between these receptors should not be neglected.

Blockage of αvß3 integrin in 3D culture of triple-negative breast cancer and endothelial cells inhibits migration and discourages endothelial-to-mesenchymal plasticity.

Breast cancer is a relevant cause of mortality in women and its triple-negative subtype (TNBC) is usually associated with poor prognosis. During tumor progression to metastasis, angiogenesis is triggered by the sprouting of endothelial cells from pre-existing vessels by a dynamic chain of events including VE-cadherin downregulation, actin protrusion, and integrin-mediated adhesion, allowing for migration and proliferation. The binding of tumoral and tumor-associated stromal cells with the extracellular matrix through integrins mediates angiogenic processes and certain integrin subtypes, such as the αvß3 integrin, are upregulated in hypoxic TNBC models. Integrin αvß3 inhibition by the high-affinity binding disintegrin DisBa-01 was previously demonstrated to induce anti-tumoral and anti-angiogenic responses in traditional 2D cell assays. Here, we investigate the effects of integrin αvß3 blockage in endothelial and TNBC cells by DisBa-01 in 3D cultures under two oxygen conditions (1% and 20%). 3D cultures created using non-adhesive micromolds with Matrigel were submitted to migration assay in Boyden chambers and fluorescence analysis. DisBa-01 inhibited cell migration in normoxia and hypoxia in both MDA-MB-231 and HUVEC spheroids. Protein levels of integrin αvß3 were overexpressed in HUVEC spheroids compared to MDA-MB-231 spheroids. In HUVEC 3D cultures, sprouting assays in collagen type I were decreased in normoxia upon DisBa-01 treatment, and VE-cadherin levels were diminished in HUVEC spheroids in hypoxia and upon DisBa-01 treatment. In conclusion, the blockage of integrin αvß3 by DisBa-01 inhibits cell migration in 3D culture and interferes with tumor-derived responses in different oxygen settings, implicating its crucial role in angiogenesis and tumor progression.

3D printed bioabsorbable composite scaffolds of poly (lactic acid)-tricalcium phosphate-ceria with osteogenic property for bone regeneration.

The fabrication of customized implants by additive manufacturing has allowed continued development of the personalized medicine field. Herein, a 3D-printed bioabsorbable poly (lactic acid) (PLA)- ß-tricalcium phosphate (TCP) (10 wt %) composite has been modified with CeO2 nanoparticles (CeNPs) (1, 5 and 10 wt %) for bone repair. The filaments were prepared by melt extrusion and used to print porous scaffolds. The nanocomposite scaffolds possessed precise structure with fine print resolution, a homogenous distribution of TCP and CeNP components, and mechanical properties appropriate for bone tissue engineering applications. Cell proliferation assays using osteoblast cultures confirmed the cytocompatibility of the composites. In addition, the presence of CeNPs enhanced the proliferation and differentiation of mesenchymal stem cells; thereby, increasing alkaline phosphatase (ALP) activity, calcium deposition and bone-related gene expression. Results from this study have shown that the 3D printed PLA-TCP-10%CeO2 composite scaffold could be used as an alternative polymeric implant for bone tissue engineering applications: avoiding additional/revision surgeries and accelerating the regenerative process.

Effect of Silicon Dioxide and Magnesium Oxide on the Printability, Degradability, Mechanical Strength and Bioactivity of 3D Printed Poly (Lactic Acid)-Tricalcium Phosphate Composite Scaffolds.

BACKGROUND: Poly (lactic acid) (PLA) is a biodegradable polyester that has been exploited for a variety of biomedical applications, including tissue engineering. The incorporation of ß-tricalcium phosphate (TCP) into PLA has imparted bioactivity to the polymeric matrix. METHODS: We have modified a 90%PLA-10%TCP composite with SiO2 and MgO (1, 5 and 10 wt%), separately, to further enhance the material bioactivity. Filaments were prepared by extrusion, and scaffolds were fabricated using 3D printing technology associated with fused filament fabrication. RESULTS: The PLA-TCP-SiO2 composites presented similar structural, thermal, and rheological properties to control PLA and PLA-TCP. In contrast, the PLA-TCP-MgO composites displayed absence of crystallinity, lower polymeric molecular weight, accelerated degradation ratio, and decreased viscosity within the 3D printing shear rate range. SiO2 and MgO particles were homogeneously dispersed within the PLA and their incorporation increased the roughness and protein adsorption of the scaffold, compared to a PLA-TCP scaffold. This favorable surface modification promoted cell proliferation, suggesting that SiO2 and MgO may have potential for enhancing the bio-integration of scaffolds in tissue engineering applications. However, high loads of MgO accelerated the polymeric degradation, leading to an acid environment that imparted the composite biocompatibility. The presence of SiO2 stimulated mesenchymal stem cells differentiation towards osteoblast; enhancing extracellular matrix mineralization, alkaline phosphatase (ALP) activity, and bone-related genes expression. CONCLUSION: The PLA-10%TCP-10%SiO2 composite presented the most promising results, especially for bone tissue regeneration, due to its intense osteogenic behavior. PLA-10%TCP-10%SiO2 could be used as an alternative implant for bone tissue engineering application.

Human HSP70-escort protein 1 (hHep1) interacts with negatively charged lipid bilayers and cell membranes.

Human Hsp70-escort protein 1 (hHep1) is a cochaperone that assists in the function and stability of mitochondrial HSPA9. Similar to HSPA9, hHep1 is located outside the mitochondria and can interact with liposomes. In this study, we further investigated the structural and thermodynamic behavior of interactions between hHep1 and negatively charged liposomes, as well as interactions with cellular membranes. Our results showed that hHep1 interacts peripherally with liposomes formed by phosphatidylserine and cardiolipin and remains partially structured, exhibiting similar affinities for both. In addition, after being added to the cell membrane, recombinant hHep1 was incorporated by cells in a dose-dependent manner. Interestingly, the association of HSPA9 with hHep1 improved the incorporation of these proteins into the lipid bilayer. These results demonstrated that hHep1 can interact with lipids also present in the plasma membrane, indicating roles for this cochaperone outside of mitochondria.

Comparison of hydrophilic and hydrophobic nano topographic surfaces of titanium alloys on pre-osteoblastic cell interaction.

This work aimed to assess the influence of different structured substrates with hydrophilic and hydrophobic properties on micro and nano topographies developed on titanium alloys over pre-osteoblastic cell behavior. Nano topography influences small dimension levels of cell morphology by inducing filopodia formation in cell membranes, irrespectively to the wettability behavior of the surface. Therefore, micro and nanostructured surfaces of titanium-based samples using different techniques of surface modification processing, such as chemical treatments, micro-arc anodic oxidation (MAO), and MAO combined to laser irradiation were developed. Isotropic and anisotropic texture morphologies, wettability, topological parameters and compositional alterations were measured after the surface treatments. Finally, cell viability, adhesion and morphological responses were assessed to investigate the influence of distinct topologies on osteoblastic cells aiming to encounter the conditions to better promote mineralization events. Our study demonstrated that the hydrophilic behavior improves cell adhesion, amplified when effective surface area increases. Surfaces presenting nano topography have a direct influence on cell morphology and play a key role for filopodia formation.

Integrative perspective of the healthy aging process considering the metabolome, cardiac autonomic modulation and cardiorespiratory fitness evaluated in age groups.

The aging process causes changes at all organic levels. Although metabolism, cardiac autonomic modulation (CAM), and cardiorespiratory fitness (CRF) are widely studied as a function of age, they are mainly studied in isolation, thus making it difficult to perceive their concomitant variations. This study aimed to investigate the integrated changes that occur in the metabolome, CAM, and CRF throughout aging in apparently healthy individuals. The subjects (n = 118) were divided into five groups according to age (20-29, 30-39, 40-49, 50-59, and 60-70 years old) and underwent blood collection, autonomic assessment, and a cardiopulmonary exercise test for metabolomics analysis using mass spectrometry and nuclear magnetic resonance, cardiac autonomic modulation analysis, and CRF by peak oxygen consumption analysis, respectively. The Tukey's post hoc and effect size with confidence interval were used for variables with a significant one-way ANOVA effect (P < 0.01). The main changes were in the oldest age group, where the CRF, valine, leucine, isoleucine, 3-hydroxyisobutyrate, and CAM reduced and hippuric acid increased. The results suggest significant changes in the metabolome, CAM, and CRF after the age of sixty as a consequence of aging impairments, but with some changes in the metabolic profile that may be favorable to mitigate the aging deleterious effects.

Improving 3-hydroxypropionic acid production in E. coli by in silico prediction of new metabolic targets.

3-Hydroxypropionic acid (3-HP) production from renewable feedstocks is of great interest in efforts to develop greener processes for obtaining this chemical platform. Here we report an engineered E. coli strain for 3-HP production through the ß-alanine pathway. To obtain a new strain capable of producing 3-HP, the pathway was established by overexpressing the enzymes pyruvate aminotransferase, 3-hydroxyacid dehydrogenase, and L-aspartate-1-decarboxylase. Further increase of the 3-HP titer was achieved using evolutionary optimizations of a genome-scale metabolic model of E. coli containing the adopted pathway. From these optimizations, three non-intuitive targets for in vivo assessment were identified: L-alanine aminotransferase and alanine racemase overexpression, and L-valine transaminase knock-out. The implementation of these targets in the production strain resulted in a 40% increase in 3-HP titer. The strain was further engineered to overexpress phosphoenolpyruvate carboxylase, reaching 0.79 ± 0.02 g/L of 3-HP when grown using glucose. Surprisingly, this strain produced 63% more of the desired product when grown using a mixture of glucose and xylose (1:1, C-mol), and gene expression analysis showed that the cellular adjustment to consume xylose had a positive impact on 3-HP accumulation. Fed-batch culture with xylose feeding led to a final titer of 29.1 g/L. These results reinforce the value of computational methods in strain engineering, enabling the design of more efficient strategies to be assessed. Moreover, higher production of 3-HP under a sugar mixture condition points towards the development of bioprocesses based on renewable resources, such as hemicellulose hydrolysates.

Small Extracellular Vesicles from Hypoxic Triple-Negative Breast Cancer Cells Induce Oxygen-Dependent Cell Invasion.

Hypoxia, a condition of low oxygenation frequently found in triple-negative breast tumors (TNBC), promotes extracellular vesicle (EV) secretion and favors cell invasion, a complex process in which cell morphology is altered, dynamic focal adhesion spots are created, and ECM is remodeled. Here, we investigated the invasive properties triggered by TNBC-derived hypoxic small EV (SEVh) in vitro in cells cultured under hypoxic (1% O2) and normoxic (20% O2) conditions, using phenotypical and proteomic approaches. SEVh characterization demonstrated increased protein abundance and diversity over normoxic SEV (SEVn), with enrichment in pro-invasive pathways. In normoxic cells, SEVh promotes invasive behavior through pro-migratory morphology, invadopodia development, ECM degradation, and matrix metalloprotease (MMP) secretion. The proteome profiling of 20% O2-cultured cells exposed to SEVh determined enrichment in metabolic processes and cell cycles, modulating cell health to escape apoptotic pathways. In hypoxia, SEVh was responsible for proteolytic and catabolic pathway inducement, interfering with integrin availability and gelatinase expression. Overall, our results demonstrate the importance of hypoxic signaling via SEV in tumors for the early establishment of metastasis.

Fabrication, morphological, mechanical and biological performance of 3D printed poly(ϵ-caprolactone)/bioglass composite scaffolds for bone tissue engineering applications.

Several techniques, such as additive manufacturing, have been used for the manufacture of polymer-ceramic composite scaffolds for bone tissue engineering. A new extruder head recently developed for improving the manufacturing process is an experimental 3D printer Fab@CTI that enables the use of ceramic powders in the processing of composite materials or polymer blends. Still, the manufacturing process needs improvement to promote the dispersion of ceramic particles in the polymer matrix. This article addresses the manufacture of scaffolds by 3D printing from mixtures of poly(ϵ-caprolactone) (PCL) and a glass powder of same composition of 45S5Bioglass®, labeled as synthesized bioglass (SBG), according to two different methods that investigated the efficiency of the new extruder head. The first one is a single extrusion process in a Fab@CTI 3D printer, and the other consists in the pre-processing of the PCL-SBG mixture in a mono-screw extruder with a Maddock® element, followed by direct extrusion in the experimental Fab@CTI 3D printer. The morphological characterization of the extruded samples by scanning electron microscope showed an architecture of 0°/90° interconnected struts and suitable porosity for bone tissue engineering applications. Scaffolds fabricated by two methods shows compressive modulus ranging from 54.4 ± 14.2 to 155.9 ± 20.4 MPa, results that are compatible to use in bone tissue engineering. Cytotoxicity assays showed non-toxic effects and viability forin vitroMG-63 cell proliferation. Alizarin Red staining test showed calcium deposition in all scaffolds, which suggests PCL/SBG composites promising candidates for use in bone tissue engineering. Results of cell morphology suggest more cell growth and adhesion for scaffolds fabricated using the pre-processing in a mono-screw extruder.

Effects of Moderate-Intensity Physical Training on Skeletal Muscle Substrate Transporters and Metabolic Parameters of Ovariectomized Rats.

A deficit of estrogen is associated with energy substrate imbalance, raising the risk of metabolic diseases. Physical training (PT) is a potent metabolic regulator through oxidation and storage of substrates transported by GLUT4 and FAT CD36 in skeletal muscle. However, little is known about the effects of PT on these carriers in an estrogen-deficit scenario. Thus, the aim of this study was to determine the influence of 12 weeks of PT on metabolic variables and GLUT4 and FAT CD36 expression in the skeletal muscle of animals energetically impaired by ovariectomy (OVX). The trained animals swam 30 min/day, 5 days/week, at 80% of the critical load intensity. Spontaneous physical activity was measured biweekly. After training, FAT CD36 and GLUT4 expressions were quantified by immunofluorescence in the soleus, as well as muscular glycogen and triglyceride of the soleus, gluteus maximus and gastrocnemius. OVX significantly reduced FAT CD36, GLUT4 and spontaneous physical activity (p < 0.01), while PT significantly increased FAT CD36, GLUT4 and spontaneous physical activity (p < 0.01). PT increased soleus glycogen, and OVX decreased muscular triglyceride of gluteus maximus. Therefore, OVX can cause energy disarray through reduction in GLUT4 and FAT CD36 and their muscle substrates and PT prevented these metabolic consequences, masking ovarian estrogen's absence.

The Effects of αvß3 Integrin Blockage in Breast Tumor and Endothelial Cells under Hypoxia In Vitro.

Breast cancer is characterized by a hypoxic microenvironment inside the tumor mass, contributing to cell metastatic behavior. Hypoxia induces the expression of hypoxia-inducible factor (HIF-1α), a transcription factor for genes involved in angiogenesis and metastatic behavior, including the vascular endothelial growth factor (VEGF), matrix metalloproteinases (MMPs), and integrins. Integrin receptors play a key role in cell adhesion and migration, being considered targets for metastasis prevention. We investigated the migratory behavior of hypoxia-cultured triple-negative breast cancer cells (TNBC) and endothelial cells (HUVEC) upon αvß3 integrin blocking with DisBa-01, an RGD disintegrin with high affinity to this integrin. Boyden chamber, HUVEC transmigration, and wound healing assays in the presence of DisBa-01 were performed in hypoxic conditions. DisBa-01 produced similar effects in the two oxygen conditions in the Boyden chamber and transmigration assays. In the wound healing assay, hypoxia abolished DisBa-01's inhibitory effect on cell motility and decreased the MMP-9 activity of conditioned media. These results indicate that αvß3 integrin function in cell motility depends on the assay and oxygen levels, and higher inhibitor concentrations may be necessary to achieve the same inhibitory effect as in normoxia. These versatile responses add more complexity to the role of the αvß3 integrin during tumor progression.

New insights into the discovery of drugs for triple-negative breast cancer metastasis.

INTRODUCTION: Triple-negative breast cancer (TNBC) is of great concern due to its aggressiveness and lack of targeted therapy. For these reasons, TNBC is one of the main causes of death in women, mainly due to metastases. Tumor dissemination has highlighted a set of possible targets, with extensive research into new single-target drugs, in addition to drug repurposing strategies, being undertaken to discover new classes of potential inhibitors of metastasis. AREAS COVERED: The authors here describe the main proposed targets and the bases of their pharmacological inhibition with different chemical compounds. The authors also discuss the state-of-the-art from the latest clinical trials and highlight other potential targets for metastatic TNBC. EXPERT OPINION: In the last decade, oncology research has changed its focus from primary tumors to moving tumor cells, their products, and to the secondary tumor and its surroundings, for the purpose of finding targets to treat metastasis. Consequently, our comprehension of the complexity of the metastatic process has increased drastically, with, furthermore, the discovery of new potential targets. Although promising, the wide range of strategies is still not effective to suppress TNBC metastasis in terms of increasing patient survival or decreasing the number of metastases. Treating or preventing metastasis continues to be a great challenge.

Resistance training variable manipulations are less relevant than intrinsic biology in affecting muscle fiber hypertrophy.

We aimed to investigate whether muscle fiber cross-sectional area (fCSA) and associated molecular processes could be differently affected at the group and individual level by manipulating resistance training (RT) variables. Twenty resistance-trained subjects had each leg randomly allocated to either a standard RT (RT-CON: without specific variables manipulations) or a variable RT (RT-VAR: manipulation of load, volume, muscle action, and rest interval at each RT session). Muscle fCSA, satellite cell (SC) pool, myonuclei content, and gene expression were assessed before and after training (chronic effect). Gene expression was assessed 24 h after the last training session (acute effect). RT-CON and RT-VAR increased fCSA and myonuclei domain in type I and II fibers after training (p < 0.05). SC and myonuclei content did not change for both conditions (p > 0.05). Pax-7, MyoD, MMP-2 and COL3A1 (chronic) and MGF, Pax-7, and MMP-9 (acute) increased similar for RT-CON and RT-VAR (p < 0.05). The increase in acute MyoG expression was significantly higher for the RT-VAR than RT-CON (p < 0.05). We found significant correlation between RT-CON and RT-VAR for the fCSA changes (r = 0.89). fCSA changes were also correlated to satellite cells (r = 0.42) and myonuclei (r = 0.50) changes. Heatmap analyses showed coupled changes in fCSA, SC, and myonuclei responses at the individual level, regardless of the RT protocol. The high between and low within-subject variability regardless of RT protocol suggests that the intrinsic biological factors seem to be more important to explain the magnitude of fCSA gains in resistance-trained subjects.

Biphasic α2ß1 Integrin Expression in Breast Cancer Metastasis to Bone.

Integrins participate in the pathogenesis and progression of tumors at many stages during the metastatic cascade. However, current evidence for the role of integrins in breast cancer progression is contradictory and seems to be dependent on tumor stage, differentiation status, and microenvironmental influences. While some studies suggest that loss of α2ß1 enhances cancer metastasis, other studies suggest that this integrin is pro-tumorigenic. However, few studies have looked at α2ß1 in the context of bone metastasis. In this study, we aimed to understand the role of α2ß1 integrin in breast cancer metastasis to bone. To address this, we utilized in vivo models of breast cancer metastasis to bone using MDA-MB-231 cells transfected with an α2 expression plasmid (MDA-OEα2). MDA cells overexpressing the α2 integrin subunit had increased primary tumor growth and dissemination to bone but had no change in tumor establishment and bone destruction. Further in vitro analysis revealed that tumors in the bone have decreased α2ß1 expression and increased osteolytic signaling compared to primary tumors. Taken together, these data suggest an inverse correlation between α2ß1 expression and bone-metastatic potential. Inhibiting α2ß1 expression may be beneficial to limit the expansion of primary tumors but could be harmful once tumors have established in bone.

Resistance Training Modulates the Matrix Metalloproteinase-2 Activity in Different Trabecular Bones in Aged Rats.

BACKGROUND: Aging decreases osteogenic ability, inducing harmful effects on the bone extracellular matrix (ECM), while exercise training has been indicated as a tool to counteract bone disorders related to advancing age. The modulation of bone ECM is regulated by several types of matrix metalloproteinase (MMP); however, MMP-2 activity in different trabecular bones in response to resistance training (RT) has been neglected. Remodeling differs in different bones under the application of the same mechanical loading. Thus, we investigated the effects of 12 weeks of RT on MMP-2 activity in the lumbar vertebra (L6), tibia, and femur of young (3 months) and older rats (21 months). METHODS: Twenty Wistar rats were divided into four groups (five animals per group): young sedentary or trained and older sedentary or trained. The 12-week RT consisted of climbing a 1.1-m vertical ladder three times per week with progressive weights secured to the animals' tails. The animals were killed 48 h after the end of the experimental period. The MMP-2 activity was assessed by the zymography method. RESULTS: The aging process induced lower MMP-2 activity in the lumbar vertebrae and tibia (p=0.01). RT upregulated pro, intermediate, and active MMP-2 activity in the tibia of young rats (p=0.001). RT also upregulated pro and active MMP-2 activity in the lumbar vertebrae and tibia with advancing age (p=0.01). There was no significant difference (p>0.05) between groups for MMP-2 of the femur, regardless of age and RT. CONCLUSION: The aging process impairs MMP-2 activity, but RT is a potential therapeutic approach to minimize the deleterious effects of ECM degeneration in different aged bones. Distinct MMP-2 responses to exercise training may result in specific remodeling processes.

Metabolic engineering of E. coli for pyocyanin production.

Pyocyanin is a secondary metabolite from Pseudomonas aeruginosa that belongs to the class of phenazines, which are aromatic nitrogenous compounds with numerous biological functions. Besides its antifungal and antimicrobial activities, pyocyanin is a remarkable redox-active molecule with potential applications ranging from the pharma industry to the development of microbial fuel cells. Nevertheless, pyocyanin production has been restricted to P. aeruginosa strains, limiting its practical applicability. In this study, the pyocyanin biosynthetic pathway was engineered for the first time for high level production of this compound in a heterologous host. Escherichia coli cells harboring the nine-gene pathway divided into two plasmids were able to produce and secrete pyocyanin at higher levels than some Pseudomonas aeruginosa strains. The influence of culture and induction parameters were evaluated, and the optimized conditions led to an increase of 3.5-fold on pyocyanin accumulation. Pathway balancing was achieved by testing a set of plasmids with different copy numbers to optimize the expression levels of pyocyanin biosynthetic genes, resulting in a fourfold difference in product titer among the engineered strains. Further improvements were achieved by co-expression of Vitreoscilla hemoglobin Vhb, which relieved oxygen limitations and led to a final titer of 18.8 mg/L pyocyanin. These results show promise to use E. coli for phenazines production, and the engineered strain developed here has the potential to be used in electro-fermentation systems where pyocyanin plays a role as electron-shuttle.

Suturable elastomeric tubular grafts with patterned porosity for rapid vascularization of 3D constructs.

Vascularization is considered to be one of the key challenges in engineering functional 3D tissues. Engineering suturable vascular grafts containing pores with diameter of several tens of microns in tissue engineered constructs may provide an instantaneous blood perfusion through the grafts improving cell infiltration and thus, allowing rapid vascularization and vascular branching. The aim of this work was to develop suturable tubular scaffolds to be integrated in biofabricated constructs, enabling the direct connection of the biofabricated construct with the host blood stream, providing an immediate blood flow inside the construct. Here, tubular grafts with customizable shapes (tubes, Y-shape capillaries) and controlled diameter ranging from several hundreds of microns to few mm are fabricated based on poly(glycerol sebacate) (PGS)/poly(vinyl alcohol) (PVA) electrospun scaffolds. Furthermore, a network of pore channels of diameter in the order of 100µm was machined by laser femtosecond ablation in the tube wall. Both non-machined and laser machined tubular scaffolds elongated more than 100% of their original size have shown suture retention, being 5.85 and 3.96 N mm-2respectively. To demonstrate the potential of application, the laser machined porous grafts were embedded in gelatin methacryloyl (GelMA) hydrogels, resulting in elastomeric porous tubular graft/GelMA 3D constructs. These constructs were then co-seeded with osteoblast-like cells (MG-63) at the external side of the graft and human umbilical vein endothelial cells inside, forming a bone osteon model. The laser machined pore network allowed an immediate endothelial cell flow towards the osteoblasts enabling the osteoblasts and endothelial cells to interact and form 3D structures. This rapid vascularization approach could be applied, not only for bone tissue regeneration, but also for a variety of tissues and organs.

Synthetic Spirocyclohexadienones as New Anti-Migratory Compounds in Triple- Negative Breast Cancer Cell Migration.

BACKGROUND: Triple-negative BC is the most aggressive type of breast cancer and its lack of responsiveness to conventional therapies requires screening of new chemical entities. Anti-migratory compounds are promising to treat metastatic cancer since they inhibit one of the main steps of the metastatic cascade. Spirocyclic compounds are non-conventional structures used as building blocks for the synthesis of biologically active molecules and considered interesting structures in the search for new targets in cancer research. OBJECTIVE: Here, we evaluated the potential of eight synthetic spirocyclohexadienones as cell migration inhibitors. METHODS: The anti-migratory ability of compounds was tested by wound healing and Boyden chamber approaches. Experiments in tubulin were performed by fluorescence and tubulin polymerization techniques. Finally, compounds were submitted to cell proliferation inhibition and flow cytometry assays to explore the mechanism by which they inhibit cell migration. RESULTS: Four compounds inhibited cell migration significantly. Analogs containing the 3,4,5-trimethoxyphenil ring at R1 position were the most potent and, thus, selected for additional experiments. Tubulin polymerization and fluorescence assays highlighted a possible binding of spirocyclohexadienones in the colchicine binding site; however, these compounds did not affect the cell cycle to the same extent as colchicine. Cell proliferation was affected and, notably, the most potent analogs induced apoptosis of tumor cells, suggesting a different mechanism by which they inhibit cell migration. CONCLUSION: We presented, for the first time, a series of eight synthetic spirocyclohexadienones with the ability to inhibit TNBC cell migration. These compounds represent a new category to be explored as anticancer agents.