ABSTRACT
Background@#Transthyretin amyloidosis cardiomyopathy (ATTR-CM) is an under-recognized cause of heart failure (HF) with clinical phenotypes that vary across regions and genotypes.We sought to characterize the clinical characteristics of ATTR-CM in Asia. @*Methods@#Data from a nationwide cohort of patients with ATTR-CM from six major tertiary centres in South Korea were analysed between 2010 and 2021. All patients underwent clinical evaluation, biochemical laboratory tests, echocardiography, and transthyretin (TTR) genotyping at the time of diagnosis. The study population comprised 105 Asian ATTR-CM patients (mean age: 69 years; male: 65.7%, wild-type ATTR-CM: 41.9%). @*Results@#Among our cohort, 18% of the patients had a mean left ventricular (LV) wall thickness < 12 mm. The diagnosis of ATTR-CM increased notably during the study period (8 [7.6%] during 2010–2013 vs. 22 [21.0%] during 2014–2017 vs. 75 [71.4%] during 2018–2021).Although the duration between symptom onset and diagnosis did not differ, the proportion of patients with HF presenting mild symptoms increased during the study period (25% NYHA class I/II between 2010–2013 to 77% between 2018–2021). In contrast to other international registry data, male predominance was less prominent in wild-type ATTR-CM (68.2%). The distribution of TTR variants was also different from Western countries and from Japan.Asp38Ala was the most common mutation. @*Conclusion@#A nationwide cohort of ATTR-CM exhibited less male predominance, a proportion of patients without increased LV wall thickness, and distinct characteristics of genetic mutations, compared to cohorts in other parts of the world. Our results highlight the ethnic variation in ATTR-CM and may contribute to improving the screening process for ATTR-CM in the Asian population.
ABSTRACT
The national licensing examination is used to evaluate the medical competency at the time of graduation, however no study has been performed on the validity of traditional Korean medicine license examination yet. The purpose of this study was to develop learning analytics using item response theory (IRT) to examine the validity and academic competency of the mock test of the national licensing exam. Classical test theory and IRT were used to evaluate the validity of test items, and IRT was used for test validity and competency analysis. The correlation between competency score of 12 subjects was analyzed using Pearson’s correlation. The distribution of students’ latent competencies was examined by gender and administrative group using a Kernel density map, Latent Profile Analysis, and χ2. The guessing parameter of 340 items was relatively high, and the information level of 12 subjects were relatively low. Significant correlations (r = 0.49–0.83, p < 0.05) were observed between the competency scores of total and 12 subjects. Two (high and low) latent academic competency groups were identified based on the competency score of 12 subjects. The low academic competency group requiring intensive management has a significantly higher frequency of male students with the experience of academic fail in the seven-year course. This study presented the quantitative learning analytics for the national licensing exam of traditional Korean medicine. The multifaceted item and test validities of the mock license test were provided, and an evidence-based approach to competency-based student management and national licensing exam of traditional Korean medicine was suggested.
ABSTRACT
Breast cancer is the most common cancer and a frequent cause of cancer-related deaths among women wordlwide. As therapeutic strategies for breast cancer have limitations, novel chemotherapeutic reagents and treatment strategies are needed. In this study, we investigated the anti-cancer effect of synthetic homoisoflavane derivatives of cremastranone on breast cancer cells. Homoisoflavane derivatives, SH-17059 and SH-19021, reduced cell proliferation through G2/M cell cycle arrest and induced caspase-independent cell death. These compounds increased heme oxygenase-1 (HO-1) and 5-aminolevulinic acid synthase 1 (ALAS1), suggesting downregulation of heme. They also induced reactive oxygen species (ROS) generation and lipid peroxidation. Furthermore, they reduced expression of glutathione peroxidase 4 (GPX4). Therefore, we suggest that the SH-17059 and SH-19021 induced the caspase-independent cell death through the accumulation of iron from heme degradation, and the ferroptosis might be one of the potential candidates for caspase-independent cell death.
ABSTRACT
Purpose@#This study investigated knowledge, attitudes, and nursing stress related to lifesustaining treatment among oncology nurses. @*Methods@#A descriptive study design was used. Data were collected through a survey from April 1 to May 31, 2022. The participants were 132 nurses working in the oncology ward of a tertiary hospital in Seoul. Data were analyzed using the SPSS 25.0 program with descriptive statics, the independent t-test, analysis of variance, and Pearson correlation coefficients. @*Results@#The average scores for knowledge, attitudes, and nursing stress related to life-sustaining treatment were 14.42, 3.29, and 3.96, respectively. Significant differences in knowledge about life-sustaining treatment were observed based on clinical experience (P=0.029) and education about life-sustaining treatment (P=0.044). Attitudes toward life-sustaining treatment varied significantly with education about life-sustaining treatment (P=0.014), while stress levels differed significantly across working units (P=0.004). A positive correlation was found between the dilemma of extending or stopping life-sustaining treatment (a subdomain of nursing stress) and attitudes toward life-sustaining treatment (r=0.260, P=0.003). @*Conclusion@#There was no significant correlation between the nursing stress experienced by oncology nurses and their knowledge and attitudes toward life-sustaining treatment. However, a more positive experience with life-sustaining treatment education was associated with higher stress levels related to the dilemma of extending or stopping life-sustaining treatment. Therefore, it is crucial to develop strategies to manage this dilemma and reduce stress in the field.
ABSTRACT
The label-free detection of SARS-CoV-2 spike protein is demonstrated by using slightly tapered no-core fiber (ST-NCF) functionalized with ACE2. In the fabricated sensor head, abrupt changes in the mode-field diameter at the interfaces between single-mode fiber and no-core fiber excite multi-guided modes and facilitate multi-mode interference (MMI). Its slightly tapered region causes the MMI to be more sensitive to the refractive index (RI) modulation of the surrounding medium. The transmission minimum of the MMI spectrum was selected as a sensor indicator. The sensor surface was functionalized with ACE2 bioreceptors through the pretreatment process. The ACE2-immobilized ST-NCF sensor head was exposed to the samples of SARS-CoV-2 spike protein with concentrations ranging from 1 to 104 ng/mL. With increasing sample concentration, we observed that the indicator dip moved towards a longer wavelength region. The observed spectral shifts are attributed to localized RI modulations at the sensor surface, which are induced by selective bioaffinity binding between ACE2 and SARS-CoV-2 spike protein. Also, we confirmed the capability of the sensor head as an effective and simple optical probe for detecting antigen protein samples by applying saliva solution used as a measurement buffer. Moreover, we compared its detection sensitivity to SARS-CoV-2 and MERS-CoV spike protein to examine its cross-reactivity. In particular, we proved the reproducibility of the bioassay protocol adopted here by employing the ST-NCF sensor head reconstructed with ACE2. Our ST-NCF transducer is expected to be beneficially utilized as a low-cost and portable biosensing platform for the rapid detection of SARS-CoV-2 spike protein.
Subject(s)
COVID-19 , Spike Glycoprotein, Coronavirus , Angiotensin-Converting Enzyme 2 , COVID-19/diagnosis , Humans , Reproducibility of Results , SARS-CoV-2 , Spike Glycoprotein, Coronavirus/metabolism , TransducersABSTRACT
Purpose@#Agonists of the stimulator of interferon genes (STING) play a key role in activating the STING pathway by promoting the production of cytokines. In this study, we investigated the antitumor effects and activation of the systemic immune response of treatment with DMXAA (5,6-dimethylxanthenone-4-acetic acid), a STING agonist, in EML4-ALK lung cancer and CT26 colon cancer. @*Materials and Methods@#The abscopal effects of DMXAA in the treatment of metastatic skin nodules were assessed. EML4-ALK lung cancer and CT26 colon cancer models were used to evaluate these effects after DMXAA treatment. To evaluate the expression of macrophages and T cells, we sacrificed the tumor-bearing mice after DMXAA treatment and obtained the formalin-fixed paraffin-embedded (FFPE) tissue and tumor cells. Immunohistochemistry and flow cytometry were performed to analyze the expression of each FFPE and tumor cell. @*Results@#We observed that highly infiltrating immune cells downstream of the STING pathway had increased levels of chemokines after DMXAA treatment. In addition, the levels of CD80 and CD86 in antigen-presenting cells were significantly increased after STING activation. Furthermore, innate immune activation altered the systemic T cell-mediated immune responses, induced proliferation of macrophages, inhibited tumor growth, and increased numbers of cytotoxic memory T cells. Tumor-specific lymphocytes also increased in number after treatment with DMXAA. @*Conclusion@#The abscopal effect of DMXAA treatment on the skin strongly reduced the spread of EML4-ALK lung cancer and CT26 colon cancer through the STING pathway and induced the presentation of antigens.
ABSTRACT
Purpose@#To evaluate the efficacy of intervention policies on coronavirus disease-19 (COVID-19) dissemination. @*Materials and Methods@#An age-structured compartmental model for the COVID-19 outbreak was proposed to predict the impact of control measures in the Seoul/Gyeonggi region. The model was calibrated based on actual data and realistic situations, including daily vaccine doses, proportion of delta variant cases, and confirmed cases by age. We simulated different scenarios for non-pharmaceutical interventions by varying social distancing and school attendance strategies. @*Results@#Two-step mitigation of social distancing without in-person classes would result in a rapid increase in confirmed cases up to 10000 but would keep severe cases within the manageable range of the health care system. The overall impact of taking down the distancing level by one step with twice the increase in contacts at school was comparable to the above scenario. Implementation of two-step mitigation of social distancing along with a two-fold increase in contacts among the school-age group would dramatically increase confirmed and severe cases by over 80000 and 100, respectively, as early as the beginning of December. This policy would cause the situation to spiral out of control, considering the scale of the response and time to prepare. On the other hand, the burden on the current healthcare system caused by two-step mitigation of social distancing and 40% increased contacts in the school-age group was manageable if prepared. @*Conclusion@#A compromise between social distancing and school attendance policy and timely preparations for the spread of COVID-19 are required.
ABSTRACT
With COVID-19 widespread worldwide, people are still struggling to develop faster and more accurate diagnostic methods. Here we demonstrated the label-free detection of SARS-CoV-2 spike protein by employing a SARS-CoV-2 spike antibody-conjugated phase-shifted long-period fiber grating (PS-LPFG) inscribed with a CO2 laser. At a specific cladding mode, the wavelength separation (λD) between the two split dips of a PS-LPFG varies with the external refractive index, although it is virtually insensitive to ambient temperature variations. To detect SARS-CoV-2 spike protein, SARS-CoV-2 spike antibodies were immobilized on the fiber surface of the fabricated PS-LPFG functionalized through chemical modification. When exposed to SARS-CoV-2 spike protein with different concentrations, the antibody-immobilized PS-LPFG exhibited the variation of λD according to the protein concentration, which was caused by bioaffinity binding-induced local changes in the refractive index at its surface. In particular, we also confirmed the potential of our sensor for clinical application by detecting SARS-CoV-2 spike protein in virus transport medium. Moreover, our sensor could distinguish SARS-CoV-2 spike protein from those of MERS-CoV and offer efficient properties such as reusability and storage stability. Hence, we have successfully fabricated a promising optical transducer for the detection of SARS-CoV-2 spike protein, which can be unperturbed by external temperature disturbances.
Subject(s)
Biosensing Techniques , COVID-19 , Humans , SARS-CoV-2 , Spike Glycoprotein, CoronavirusABSTRACT
In this work, we experimentally demonstrated an optical fiber sensor capable of performing simultaneous measurement of torsion and temperature using a π-phase-shifted long-period fiber grating (LPFG) inscribed on double-clad fiber (DCF), referred to as a PS-DC-LPFG. The fabricated PSDC- LPFG showed split attenuation bands near its resonance wavelength, and the two dips in these bands were selected as sensor indicators, denoted as Dips A and B, for the simultaneous measurement of torsion and temperature. The torsion and temperature responses of the two indicators were investigated in a twist angle range from -360° to 360° and a temperature range from 30 to 120 °C, respectively. When the twist angle increased from 0° to 360° (clockwise) at room temperature, both Dips A and B showed redshifts. On the contrary, when the twist angle decreased from 0° to -360° (counterclockwise), the two dips showed blueshifts. In terms of temperature responses, both dips showed redshifts with increasing ambient temperature while the sensor head (i.e., the PS-DC-LPFG) remained straight without any applied torsion. Owing to their linear and independent responses to torsion and temperature, the changes in torsion and temperature applied to the PSDC- LPFG could be simultaneously estimated from the measured wavelength shifts and calculated sensitivities of the two indicator dips.
ABSTRACT
We propose an optical fiber grating sensor capable of simultaneously measuring pH and temperature based on a phase-shifted long-period fiber grating (PS-LPFG) inscribed on high-birefringence fiber (HBF). The PS-LPFG was fabricated on HBF with CO2 laser pulses, and a phase shift π was induced by inserting a grating-free fiber region (GFFR) between two identical LPFGs with a grating period of Ë510 µm. The length of the GFFR was set as half of the grating period to induce a π phase shift. With the spectral characteristics of a π-PS-LPFG exhibiting two split attenuation bands, the PS-LPFG written on HBF, which is referred to as the HB-PS-LPFG, can create two polarization-dependent transmission spectra with dual-resonance dips at different wavelengths according to two orthogonal input polarization states, e.g., linear horizontal polarization (LHP) and linear vertical polarization (LVP). For simultaneous measurement of pH and temperature with the fabricated HB-PS-LPFG as a sensor head, the inter-resonance wavelength separation of the dual-resonance dips in each transmission spectrum obtained for an LHP or LVP input signal was exploited as a sensor indicator. By investigating the wavelength changes of the two sensor indicators, which were induced by pH and temperature variations, linear and independent spectral responses to both pH and temperature variations were experimentally confirmed in a pH range from 1 to 11 and a temperature range from 25 to 65 °C. Owing to the unique pH and temperature responses of the fabricated HB-PS-LPFG, ambient variations in pH and temperature could be simultaneously estimated from the measured wavelength changes and sensitivities of the two sensor indicators.
ABSTRACT
The switching characteristics of a vanadium dioxide (VO2) thin-film device, in which the current flowing through the device can be switched through the photothermal effect using focused laser pulses, were investigated according to the dimensions of the sapphire substrate on which the VO2 thin film was deposited through simulation using COMSOL Multiphysics. The physical properties of the VO2 device, modeled for the simulation, were determined according to the structural and electrical properties and photothermally controlled current-switching characteristics of fabricated VO2 devices. For a variety of substrate dimensions of the modeled VO2 device, we explored transient variations in the temperature of some specific regions and the device current switched by laser irradiation. The investigation results revealed that the stability of the bidirectional current-switching operation triggered on and off by laser illumination tends to increase as the area of the substrate increases with its thickness fixed. However, above a certain substrate area, the rate of improvement in the switching stability decreases rapidly and approaches zero.
ABSTRACT
In this study, we implemented reversible current switching (RCS) of 100 mA in a two-terminal device based on a vanadium dioxide (VO2) thin film, which could be controlled by far-infrared (FIR) laser pulses. The VO2 thin films used for fabrication of two-terminal devices were grown on sapphire (Al2O3) substrates using a pulsed laser deposition method. An optimal deposition condition was determined by analyzing the resistance-temperature curves of deposited VO2 thin films and the current-voltage characteristics of two-terminal devices based on these films, which were suggested in our previous works. The film surface of the VO2-based device was directly irradiated using focused CO2 laser pulses, and the insulator-metal transition or metal-insulator transition of the VO2 thin film could be triggered depending on laser irradiation. Consequently, RCS of up to 100 mA could be accomplished. This on-state current is close to the upper limit of the current flowing through our VO2 device. The switching contrast, defined as the ratio between on-state and off-state currents, was evaluated and found to be Ë11,962. The average rising and falling times of the switched current were found to be Ë29.2 and Ë71.7 ms, respectively. In comparison with our previous work, the improved heat dissipation structure and the high-quality thin film could maintain the switching contrast at a similar level, although the on-state current was increased by about two times.
ABSTRACT
Here we report an optical fiber sensor capable of performing strain-insensitive simultaneous measurement of bending and temperature using a long-period fiber grating (LPFG) inscribed on doubleclad fiber (DCF) with a CO2 laser at Ë10.6 µm. The LPFG inscribed on DCF, referred to as a DC-LPFG, was fabricated by scanning CO2 laser pulses on an unjacketed DCF with a specific period. Due to co-directional mode coupling, the fabricated DC-LPFG has discrete attenuation bands widely distributed over hundreds of nanometers. Among these wavelength-dependent loss dips, adjacent two dips with different resonance wavelengths were selected as sensor indicators for the measurement of bending and temperature. For these two indicator dips designated as dips A and B, their bending and temperature responses were investigated in a curvature range of 4.90 to 21.91 m-1 and a temperature range of 30 to 110 °C. With increasing bending applied to the DC-LPFG at room temperature, dips A and B showed different blue shifts. The bending sensitivities of dips A and B were measured to be approximately -0.77 and 0.51 nm/m-1, respectively. Unlike the bending response, they showed red shifts of different amounts with increasing ambient temperature, while the sensor head (i.e., the DC-LPFG) remained straight without any applied bending. The temperature sensitivities of dips A and B were measured to be Ë0.094 and Ë0.078 nm/°C, respectively. Owing to their linear and independent responses to bending and temperature, bending and temperature changes applied to the DC-LPFG could be simultaneously estimated from the measured wavelength shifts of the two indicator dips using their pre-determined bending and temperature sensitivities. Moreover, in a strain range of 0 to 2200 µÎµ (step: 200 µÎµ), strain-induced spectral variations of dips A and B were also measured, and the strain sensitivities of dips A and B were evaluated as approximately -0.028 and -0.013 pm/µÎµ, respectively. These strain-induced wavelength shifts were so small that they had little effect on the measurement results of bending and temperature. Thus, it is concluded that the fabricated DC-LPFG can be employed as a cost-effective sensor head for strain-insensitive separate measurement of bending and temperature.
ABSTRACT
In this paper, we propose a bend-insensitive optical fiber sensor capable of separately measuring strain and temperature by incorporating a fiber transmission grating (FTG) inscribed on high birefringence photonic crystal fiber (HBPCF) with a CO2 laser. The FTG was fabricated by exposing unjacketed HBPCF to CO2 laser pulses using the line-by-line technique. The FTG inscribed on HBPCF, referred to as the HBPC-FTG, has two resonance dips with different wavelengths depending on input polarization. These two resonance dips were utilized as sensor indicator dips denoted by a shorter wavelength dip (SD) and a longer wavelength dip (LD). The strain and temperature responses of the SD and LD were investigated in a strain range of 0 to 3105 µ and a temperature range of 30 to 85 °C, respectively. The measured strain sensitivities of the SD and LD at room temperature (25 °C) were approximately -0.46 and -0.58 pm/µ, respectively. Similarly, the measured temperature sensitivities of the SD and LD without applied strain (0 µ) were Ë5.99 and Ë9.89 pm/°C, respectively. Owing to their linear and independent responses to strain and temperature, strain and temperature changes applied to the HBPC-FTG can be simultaneously estimated from the measured wavelength shifts of the two indicator dips (i.e., SD and LD) using their predetermined strain and temperature sensitivities. Moreover, bend-induced spectral variations of the SD and LD were also examined in a curvature range of 0-4.705 m-1, and it was observed that both dips showed little wavelength shift due to applied bending. Thus, it is concluded from the experimental results that the fabricated HBPC-FTG can be employed as a cost-effective sensor head for bend-insensitive discrimination of strain and temperature.
ABSTRACT
Here we propose an optical fiber sensor capable of simultaneous measurement of liquid level and temperature by utilizing cascaded long-period fiber gratings (LPFGs) inscribed on high-birefringence fiber (HBF) and a Faraday rotator mirror (FRM). Due to the in-fiber Mach-Zehnder interference and birefringence of the HBF, these cascaded LPFGs have polarization-dependent discrete interference spectra, each of which is created within one of the two different attenuation bands obtained in the two orthogonal input polarization states, e.g., linear horizontal polarization (LHP) and linear vertical polarization (LVP). The minimum transmittance dip was selected as a sensor indicator for each interference spectrum obtained for LHP or LVP input signal. To monitor these indicator dips associated with LHP and LVP, referred to as the IDH and IDV, respectively, with one spectral scanning, an FRM was connected to the end of the cascaded LPFGs. Both the IDH and IDV spectrally shifted according to liquid-level or temperature changes and showed very linear responses to them with adjusted R2 values greater than 0.997. The liquid-level sensitivities of the IDH and IDV were measured as approximately -37.29 and -121.08 pm/mm in a liquid-level range of 0 to 55 mm, respectively. The temperature sensitivities of the IDH and IDV were measured as Ë28.79 and Ë218.21 pm/°C in a temperature range of 30 to 60 °C, respectively. Owing to their linear and independent responses to liquid level and temperature, our sensor can perform temperature-independent liquid-level measurement using their pre-determined liquid-level and temperature sensitivities, even if both liquid level and temperature change simultaneously.
ABSTRACT
Background@#Intrapleural urokinase is one of the most widely used fibrinolytic agents in the treatment of complicated parapneumonic effusion (CPPE). However, little research has been performed on the optimal urokinase dosage. The aim of this study was to evaluate the treatment efficacy of half dose urokinase compared with conventional dose urokinase. @*Methods@#We retrospectively enrolled 92 patients with CPPE or empyema who underwent intrapleural urokinase treatment at two tertiary hospitals. Patients received antibiotics, chest tube drainage, and other treatments as part of routine care. The primary outcome was the treatment success rate in the half dose urokinase group (50,000 IU daily for maximal 6 days) and the conventional dose urokinase group (100,000 IU daily). Treatment success was defined as clinical and radiological improvements without surgical treatment or re-admission within one month. @*Results@#Forty-four patients received half dose urokinase, whereas 48 patients were treated with conventional dose urokinase. Both groups were relatively well matched at baseline, excluding higher serum white blood cell count and higher empyema prevalence in the half dose urokinase group. The treatment success rate was not different between the two groups (p=0.048). There were no differences in the rate of in-hospital death and surgical treatment, hospitalization duration, and indwelling catheter duration. In the multivariate analysis, urokinase dose was not a predictor of treatment success. @*Conclusion@#Half dose intrapleural urokinase is equally effective conventional dose urokinase in treating patients with CPPE or empyema.
ABSTRACT
Bruton's tyrosine kinase (BTK) is an attractive target for treating patients with B cell malignancies and autoimmune diseases. Many BTK inhibitors have been identified; however, like other kinase inhibitors, they lack diversity in their core structures. Therefore, it is important to secure a novel scaffold that occupies the adenine-binding site of BTK. We screened an in-house library of natural products and their analogs via a biochemical assay to identify a novel scaffold for targeting BTK. A pyranochromenone scaffold, derived from a natural active component decursin, was found to be effective at targeting BTK and was selected for further optimization. A series of pyranochromenone analogs was synthesized through the modification of pyranochromenone at the C7 position. Pyranochromenone compounds with an electrophilic warhead exhibited promising BTK inhibitory activity, with IC50 values in the range of 0.5-0.9 µM. A docking study of the representative compound 8 provided a reasonable explanation for compound activity. Compound 8 demonstrated good selectivity over other associated kinases and decreased the production of proinflammatory cytokines in THP cells. Moreover, compound 8 presented significant in vivo efficacy in a murine model of collagen-induced arthritis.
Subject(s)
Agammaglobulinaemia Tyrosine Kinase/antagonists & inhibitors , Antirheumatic Agents/pharmacology , Benzopyrans/pharmacology , Biological Products/pharmacology , Butyrates/pharmacology , Protein Kinase Inhibitors/pharmacology , Agammaglobulinaemia Tyrosine Kinase/chemistry , Agammaglobulinaemia Tyrosine Kinase/metabolism , Animals , Antirheumatic Agents/chemistry , Arthritis, Experimental/prevention & control , Benzopyrans/chemistry , Biological Products/chemistry , Butyrates/chemistry , Humans , Male , Mice, Inbred DBA , Molecular Docking Simulation , Molecular Structure , Protein Domains , Protein Kinase Inhibitors/chemistry , Structure-Activity Relationship , THP-1 CellsABSTRACT
Here we propose a wavelength-switchable erbium-doped fiber ring laser using a temperatureinsensitive spectral polarization-dependent loss (PDL) element and two fiber Bragg gratings (FBGs). The fiber PDL element was fabricated by inscribing a long-period grating (LPG) on polarizationmaintaining photonic crystal fiber (PMPCF) with a 10.6 µm CO2 laser. The LPG fabricated on PMPCF, referred to as PMPCF-LPG, has the characteristics of a fiber polarizer at two specific wavelengths due to the birefringence of PMPCF and the co-directional mode coupling of the LPG. The two wavelengths at which the fabricated PMPCF-LPG acts as a polarizer are two resonance wavelengths (~1528.58 and ~1555.90 nm) of the PMPCF-LPG, obtained for orthogonal input polarization states. By considering these two resonance wavelengths of the PMPCF-LPG, the Bragg wavelengths of two FBGs, which determine lasing wavelengths in our wavelength-switchable laser, were selected as ~1527.71 and ~1554.74 nm. As the temperature sensitivity of the PMPCF birefringence is 30 times lower than that of the birefringence of conventional polarization-maintaining fiber (PMF), the fabricated PMPCF-LPG could facilitate more stable switching operation between the two lasing wavelengths in comparison with a previous fiber laser employing an LPG inscribed on conventional PMF as a wavelength-switching filter. The lasing wavelengths of our laser could be switched by controlling input polarization of the PMPCF-LPG with a polarization controller, and temperature-insensitive wavelength switching operation was experimentally demonstrated over a temperature range of 25-100 °C.
ABSTRACT
Here we propose a novel optical fiber sensor capable of simultaneous measurement of strain and temperature by utilizing a long-period fiber grating (LPFG) inscribed on polarization-maintaining photonic crystal fiber (PMPCF) as a sensor head. The sensor head was fabricated by irradiating CO2 laser pulses to one side of PMPCF with line-by-line technique. The LPFG written on PMPCF (referred to as the PMPC-LPFG) exhibits two different wavelength-dependent loss bands, obtained at two orthogonal input polarization states. For two resonance wavelengths of these two wavelength-dependent loss bands, designated as Dips A and B, strain and temperature responses were investigated in a strain range of 0 to 2058 µÉ with a step of 98 µÉ and a temperature range of 30 to 85 °C with a step of 5 °C. Strain sensitivities of Dips A and B were measured and found to be approximately -0.82 and -1.43 pm/µÉ, respectively, at room temperature (25 °C). Similarly, temperature sensitivities of Dips A and B were measured and found to be ~7.89 and ~4.76 pm/°C without applied strain (0 µÉ), respectively. Owing to their linear and independent responses to strain and temperature, strain and temperature changes applied to the PMPC-LPFG can be simultaneously estimated from the measured wavelength shifts of the two resonance dips (Dips A and B) using their premeasured strain and temperature sensitivities. The experimental results prove that the PMPC-LPFG can be used as a sensor head for simultaneous measurement of strain and temperature.
ABSTRACT
Here we report on the simultaneous measurement of bending and temperature, carried out using a long-period fiber grating (LPFG) inscribed on polarization-maintaining fiber (PMF) with a CO2 laser at ~10.6 µm. An LPFG written on PMF, referred to as a PM-LPFG, has an input-polarizationdependent resonance dip, and two separated resonance dips, designated as Dips A and B, are obtained with respect to orthogonal input polarization. At the resonance wavelengths of Dips A and B, the core mode is coupled into two different cladding modes that have different bending and temperature sensitivities. The fabricated PM-LPFG whose grating period and length are ~505 µm and ~14.65 mm, respectively, has two resonance wavelengths, i.e., λA= ~1479.98 nm and λB = ~1568.78 nm, measured with respect to two orthogonal input polarization states. The bending sensitivities of this PM-LPFG were measured as ~22.23 and ~33.38 nm/m-1 (adjusted R² values: ~0.9916 and ~0.9810) at λA and λB, respectively, in a curvature range of 1.41-2.30 m-1. The temperature sensitivities of the PM-LPFG were measured as ~0.132 and ~0.039 nm/°C (adjusted R² values: ~0.9929 and ~0.9980) at λA and λB, respectively, in a temperature range of 30-90 °C. These linear bending and temperature responses of the PM-LPFG at two different resonance wavelengths enable simultaneous measurement of bending and temperature variations applied to the PM-LPFG.