Population exposure to emerging perfluoroalkyl acids (PFAAs) via drinking water resources: Application of multivariate statistics and risk assessment models.

This study assessed the occurrence, origins, and potential risks of emerging perfluoroalkyl acids (PFAAs) for the first time in drinking water resources of Khyber Pakhtunkhwa, Pakistan. In total, 13 perfluoroalkyl carboxylic acids (PFCAs) with carbon (C) chains C4-C18 and 4 perfluoroalkyl sulfonates (PFSAs) with C chains C4-C10 were tested in both surface and ground drinking water samples using a high-performance liquid chromatography system (HPLC) equipped with an Agilent 6460 Triple Quadrupole liquid chromatography-mass spectrometry (LC-MS) system. The concentrations of ∑PFCAs, ∑PFSAs, and ∑PFAAs in drinking water ranged from 1.46 to 72.85, 0.30-8.03, and 1.76-80.88 ng/L, respectively. Perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA), and perfluoropentanoic acid (PFPeA) were the dominant analytes in surface water followed by ground water, while the concentration of perfluorobutane sulfonate (PFBS), perfluorooctanoic acid (PFOA), perfluoroheptanoic acid (PFHpA), perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluoroundecanoic acid (PFUnDA), and perfluorododecanoic acid (PFDoDA) were greater than long-chain PFOA and PFOS. The correlation statistics, which showed a strong correlation (p < 0.05) between the PFAA analytes, potentially indicated the fate of PFAAs in the area's drinking water sources, whereas the hierarchical cluster analysis (HCA) and principal component analysis (PCA) statistics identified industrial, domestic, agricultural, and commercial applications as potential point and non-point sources of PFAA contamination in the area. From risk perspectives, the overall PFAA toxicity in water resources was within the ecological health risk thresholds, where for the human population the hazard quotient (HQ) values of individual PFAAs were < 1, indicating no risk from the drinking water sources; however, the hazard index (HI) from the ∑PFAAs should not be underestimated, as it may significantly result in potential chronic toxicity to exposed adults, followed by children.

Magnetic nanocomposite of maize offal biomass for effective sequestration of Congo red and methyl orange dyes from contaminated water: modeling, kinetics and reusability.

The current study aims to use a facile and novel method to remove Congo red (CR) and Methyl Orange (MO) dyes from contaminated water with Maize offal biomass (MOB) and its nanocomposite with magnetic nanoparticles (MOB/MNPs). The MOB and MOB/MNPs were characterized with Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), BET, XRD and point of zero charge (pHPZC). The influence of initial CR and MO levels (20-320 mg/L), adsorbent dosage (1-3 g/L), pH (3-9), co-exiting ions, temperature (25-45 °C) and time (15-180 min) was estimated. The findings demonstrated that MOB/MNPs exhibited excellent adsorption of 114.75 and 29.0 mg/g for CR and MO dyes, respectively while MOB exhibited 81.35 and 23.02 mg/g adsorption for CR and MO dyes, respectively at optimum pH-5, and dose 2 g/L. Initially, there was rapid dye removal which slowed down until equilibrium was reached. The interfering/competing ions in contaminated water and elevated temperature favored the dyes sequestration. The MOB/MNPs exhibited tremendous reusability and stability. The dyes adsorption was spontaneous, and exothermic with enhanced randomness. The adsorption effects were well explained with Freundlich model, pseudo second order and Elovich models. It is concluded that MOB/MNPs showed excellent, eco-friendly, and cost-effective potential to decontaminate the water.

Nanocomposite of Maize offal biomass demonstrated higher dyes removal.FTIR, SEM, BET, XRD and pH_PZC provided vital evidence for dyes adsorption.MOB/MNPs displayed excellent stability and reusability for dyes adsorption.Groundwater samples exposed a higher dyes removal.Results were validated with equilibrium and kinetic adsorption models.

Removal of organic pollutants through hydroxyl radical-based advanced oxidation processes.

The use of Advance Oxidation Process (AOPs) has been extensively examined in order to eradicate organic pollutants. This review assesses the efficacy of photolysis, O3 based (O3/UV, O3/H2O2, O3/H2O2/UV, H2O2/UV, Fenton, Fenton-like, hetero-system) and sonochemical and electro-oxidative AOPs in this regard. The main purpose of this review and some suggestions for the advancement of AOPs is to facilitate the elimination of toxic organic pollutants. Initially proposed for the purification of drinking water in 1980, AOPs have since been employed for various wastewater treatments. AOPs technologies are essentially a process intensification through the use of hybrid methods for wastewater treatment, which generate large amounts of hydroxyl (•OH) and sulfate (SO4·-) radicals, the ultimate oxidants for the remediation of organic pollutants. This review covers the use of AOPs and ozone or UV treatment in combination to create a powerful method of wastewater treatment. This novel approach has been demonstrated to be highly effective, with the acceleration of the oxidation process through Fenton reaction and photocatalytic oxidation technologies. It is clear that Advance Oxidation Process are a helpful for the degradation of organic toxic compounds. Additionally, other processes such as •OH and SO4·- radical-based oxidation may also arise during AOPs treatment and contribute to the reduction of target organic pollutants. This review summarizes the current development of AOPs treatment of wastewater organic pollutants.

Heavy metals in five commonly consumed fish species from River Swat, Pakistan, and their implications for human health using multiple risk assessment approaches.

This study analyzed the levels of heavy metals bioaccumulation in commonly consumed riverine fish species, including G. cavia, T. macrolepis, G. gotyla, S. plagiostomus, and M. armatus from River Swat in Pakistan, and quantify their potential risk to children and adults in general and fisherfolk communities using multiple pollution and risk assessment approaches. The highest metal detected by inductive coupled plasma mass spectrometry (ICP-MS) was Zn, which ranged from 49.61 to 116.83 mg/kg, followed by Fe (19.25-101.33 mg/kg) > Mn (5.25-40.35 mg/kg) > Cr (3.05-14.59 mg/kg) > Ni (4.26-11.80 mg/kg) > Al (1.59-12.25 mg/kg) > Cu (1.24-8.59 mg/kg) > Pb (0.29-1.95 mg/kg) > Co (0.08-0.46 mg/kg) > Cd (0.01-0.29 mg/kg), demonstrating consistent fluctuation with the safe recommendations of global regulatory bodies. The average bioaccumulation factor (BAF) values in the examined fish species were high (BAF > 5000) for Pb, Zn, Mn, Cu, Cr, Ni, and Cd, bioaccumulate (1000 > BAF < 5000) for Co, and probable accumulative (BAF <1000) for Fe, and Al, while the overall ∑heavy metals pollution index (MPI) values were greater than one (MPI > 1) indicating sever heavy metals toxicity in G. cavia, followed by S. plagiostomus, M. armatus, G. gotyla, and T. macrolepis. The multivariate Pearson's correlation analysis identified the correlation coefficients between heavy metal pairs (NiCr, CuCr, PbCr, AlCo, CuNi, and PbNi), the hierarchical cluster analysis (CA) determined the origin by categorizing heavy metal accumulation into Cluster-A, Cluster-B, and Cluster-C, and the principal component analysis (PCA) discerned nearby weathering, mining, industrial, municipal, and agricultural activities as the potential sources of heavy metals bioaccumulation in riverine fish. As per human risk perspective, S.plagiostomus contributed significantly to the estimated daily intake (EDI) of heavy metals, followed by G.cavia > M.armatus > G.gotyla > T.macrolepis in dependent children and adults of the fisherfolk followed by the general population. The non-carcinogenic target hazard quotient (THQ) and hazard index (HI) values for heavy metal intake through fish exposure were < 1, while the carcinogenic risk (CR) for individual metal intake and the total carcinogenic risk (TCR) for cumulative Cr, Cd, and Pb intake were within the risk threshold of 10-6-10-4, suggesting an acceptable to high non-carcinogenic and carcinogenic risk for both children and adults in the fisherfolk, followed by the general population.

Brief review: Applications of nanocomposite in electrochemical sensor and drugs delivery.

The recent advancement of nanoparticles (NPs) holds significant potential for treating various ailments. NPs are employed as drug carriers for diseases like cancer because of their small size and increased stability. In addition, they have several desirable properties that make them ideal for treating bone cancer, including high stability, specificity, higher sensitivity, and efficacy. Furthermore, they might be taken into account to permit the precise drug release from the matrix. Drug delivery systems for cancer treatment have progressed to include nanocomposites, metallic NPs, dendrimers, and liposomes. Materials' mechanical strength, hardness, electrical and thermal conductivity, and electrochemical sensors are significantly improved using nanoparticles (NPs). New sensing devices, drug delivery systems, electrochemical sensors, and biosensors can all benefit considerably from the NPs' exceptional physical and chemical capabilities. Nanotechnology is discussed in this article from a variety of angles, including its recent applications in the medical sciences for the effective treatment of bone cancers and its potential as a promising option for treating other complex health anomalies via the use of anti-tumour therapy, radiotherapy, the delivery of proteins, antibiotics, and vaccines, and other methods. This also brings to light the role that model simulations can play in diagnosing and treating bone cancer, an area where Nanomedicine has recently been formulated. There has been a recent uptick in using nanotechnology to treat conditions affecting the skeleton. Consequently, it will pave the door for more effective utilization of cutting-edge technology, including electrochemical sensors and biosensors, and improved therapeutic outcomes.

Potential of magnetic quinoa biosorbent composite and HNO3 treated biosorbent for effective sequestration of chromium (VI) from contaminated water.

The present study aims to prepare novel quinoa biosorbent (QB), acid activated QB (QB/Acid) and its nanocomposite with magnetic nanoparticles (QB/MNPs) for batch scale Cr removal from contaminated water. The Cr adsorption was systematically studied at different pH (2-9), adsorbent dosage (1-3 g/L), initial concentration (25-200 mg/L), contact time (180 min) and competing ions in water. Maximum Cr adsorption was observed onto QB/MNPs (57.4 mg/L), followed by QB/Acid (46.35 mg/g) and QB (39.9 mg/g). The Cr removal by QB/MNPs was higher than QB/Acid and QB. Results revealed that the highest Cr removal was obtained at optimum pH 4, 25 mg/L, and 2 g/L dosage. The FTIR spectra displayed various functional groups on adsorbents surface serving as a potential scaffold to remove Cr from contaminated water. The equilibrium and kinetic Cr adsorption data best fitted with Freundlich and pseudo-second order models, respectively (R2 ≥ 0.96). The QB/MNPs showed excellent reusability in five adsorption/desorption cycles (4.7% decline) with minor leaching of Fe (below threshold level). The coexisting ions in groundwater showed an inhibitory effect on Cr sequestration (5%) from water. The comparison of Cr adsorption by QB/MNPs and QB/Acid showed better potential for Cr sequestration than various previously explored adsorbents in the literature.

Quinoa is a cereal crop and after harvesting quinoa straws are either burnt or thrown away which can cause several environmental problems. It would be beneficial to utilize quinoa straws and its modified forms as adsorbents for the water remediation. Therefore, current study aims to estimate the adsorption capacity of quinoa biomass as biosorbent (QB) and its modifications (QB/Acid and QB/MNPs) to treat Cr (VI) contaminated water. The influence of various parameters governing the Cr removal from water has been evaluated. The reusability of QB/MNPs has also been evaluated for its economical use without losing effectiveness for Cr removal from water. The comparison of Cr adsorption by QB/MNPs and QB/Acid showed better adsorption potential for Cr sequestration than various previously explored adsorbents in the literature.

Cobalt and nitrogen co-doped monolithic carbon foam for ultrafast degradation of emerging organic pollutants via peroxymonosulfate activation.

Cobalt-based catalysts are expected as one of the most promising peroxymonosulfate (PMS) activators for the removal of organic pollutants from industrial wastewater. However, the easy agglomeration, difficult separation, and secondary pollution of cobalt ions limit their practical application. In this study, a novel, highly efficient, reusable cobalt and nitrogen co-doped monolithic carbon foam (Co-N-CMF) was utilized to activate PMS for ultrafast pollutant degradation. Co-N-CMF (0.2 g/L) showed ultrafast catalytic kinetics and higher total organic carbon (TOC) removal efficiency. Bisphenol A, ciprofloxacin, 2,4-dichlorophenoxyacetic acid, and 2,4-dichlorophenol could be completely degraded after 2, 4, 5, and 5 min, and the TOC removal efficiencies were 77.4 %, 68.9 %, 72.8 %, and 79.8 %, respectively, corresponding to the above pollution. The sulfate radical (SO4•-) was the main reactive oxygen species in Co-N-CMF/PMS based on electron paramagnetic resonance. The ecological structure-activity relationship program analysis via the quantitative structure activity relationship analysis and phytotoxicity assessment revealed that the Co-N-CMF/PMS system demonstrates good ecological safety and ecological compatibility. The Co-N-CMF catalyst has good catalytic activity and facile recycling, which provides a fine method with excellent PMS activation capacity for 2,4-dichlorophenol elimination from simulated industrial wastewater. This study provides new insights into the development of monolithic catalysts for ultrafast wastewater treatment via PMS activation.

Photocatalytic response in water pollutants with addition of biomedical and anti-leishmanial study of iron oxide nanoparticles.

Public health is a major concern globally, owing to the presence of industrial dyes in the effluent. Nanoparticles with green synthesis are an enthralling research field with various applications. This study deals with investigating the photocatalytic potential of Fe-oxide nanoparticles (FeO-NPs) for the degradation of methylene blue dye and their potential biomedical investigations. Biosynthesis using Anthemis tomentosa flower extract showed to be an effective method for the synthesis of FeO-NPs. The freshly prepared FeO-NPs were characterized through UV/Vis spectroscopy showing clear peak at 318 nm. The prepared FeO-NPs were of smaller size and spherical shape having large surface area and porosity with no aggregations. The FeO-NPs were characterized using XRD, FTIR, HRTEM, SEM and EDX. The HRTEM results showed that the particle size of FeO-NPs was 60-90 nm. The antimicrobial properties of FeO-NPs were investigated against two bacterial Staphylococcus aureus 13 (±0.8) and Klebsiella pneumoniae 6(±0.6) and three fungal species Aspergillus Niger, Aspergillus flavus, and Aspergillus fumigatus exhibiting a maximum reduction of 57% 47% and 50%, respectively. Moreover, FeO-NPs exhibited high antioxidant properties evaluated against ascorbic acid. Overall, this study showed high photocatalytic, antimicrobial, and antioxidant properties of FeO-NPs owing to their small size and large surface area. However, the ecotoxicity study of methylene blue degradation products showed potential toxicity to aquatic organisms.

Potential of nanocomposites of zero valent copper and magnetite with Eleocharis dulcis biochar for packed column and batch scale removal of Congo red dye.

The current study is the first attempt to prepare nanocomposites of Eleocharis dulcis biochar (EDB) with nano zero-valent Copper (nZVCu/EDB) and magnetite nanoparticles (MNPs/EDB) for batch and column scale sequestration of Congo Red dye (CR) from synthetic and natural water. The adsorbents were characterized with advanced analytical techniques. The impact of EDB, MNPs/EDB and nZVCu/EDB dosage (1-4 g/L), pH (4-10), initial concentration of CR (20-500 mg/L), interaction time (180 min) and material type to remove CR from water was examined at ambient temperature. The CR removal followed sequence of nZVCu/EDB > MNPs/EDB > EDB (84.9-98% > 77-95% > 69.5-93%) at dosage 2 g/L when CR concentration was increased from 20 to 500 mg/L. The MNPs/EDB and nZVCu/EDB showed 10.9% and 20.1% higher CR removal than EDB. The adsorption capacity of nZVCu/EDB, MNPs/EDB and EDB was 212, 193 and 174 mg/g, respectively. Freundlich model proved more suitable for sorption experiments while pseudo 2nd order kinetic model well explained the adsorption kinetics. Fixed bed column scale results revealed excellent retention of CR (99%) even at 500 mg/L till 2 h when packed column was filled with 3.0 g nZVCu/EDB, MNPs/EDB and EDB. These results revealed that nanocomposites with biochar can be applied efficiently for the decontamination of CR contaminated water.

Distribution and health risk assessment of trace elements in ground/surface water of Kot Addu, Punjab, Pakistan: a multivariate analysis.

Water is a key component for living beings to sustain life and for socio-economic development. Anthropogenic activities contribute significantly to ground/surface water contamination particularly with trace elements. The present study was designed to evaluate distribution and health risk assessment of trace elements in ground/surface water of the previously unexplored area, Tehsil Kot Addu, Southern-Punjab, Pakistan. Ground/surface water samples (n = 120) were collected from rural and urban areas of Kot Addu. The samples were analyzed for physicochemical characteristics: total dissolved solids (TDS), pH, and EC (electrical conductivity), cations, anions, and trace elements particularly arsenic (As), lead (Pb), cadmium (Cd), and zinc (Zn). All of the water characteristics were evaluated based on the water quality standards set by World Health Organization (WHO). Results revealed the suitability of water for drinking purpose with respect to physicochemical attributes. However, the alarming levels of trace elements especially As, Cd, and Pb make it unfit for drinking purpose. Noticeably, 23, 96, and 98% of water samples showed As, Cd, and Pb concentrations higher than the permissible limits. Overall, the estimated carcinogenic and non-carcinogenic risk to the exposed community was higher than the safety level of USEPA, suggesting the probability of cancer and other diseases through long-term exposure via ingestion routes. Therefore, this study demonstrated an urgent need for water filtration/purification techniques, and some quality control measures are warranted to protect the health of the exposed community in Tehsil Kot Addu.

Arsenic biogeochemical cycling in paddy soil-rice system: Interaction with various factors, amendments and mineral nutrients.

Arsenic (As) contamination is a well-recognized environmental and health issue, threatening over 200 million people worldwide with the prime cases in South and Southeast Asian and Latin American countries. Rice is mostly cultivated under flooded paddy soil conditions, where As speciation and accumulation by rice plants is controlled by various geo-environmental (biotic and abiotic) factors. In contrast to other food crops, As uptake in rice has been found to be substantially higher due to the prevalence of highly mobile and toxic As species, arsenite (As(III)), under paddy soil conditions. In this review, we discussed the biogeochemical cycling of As in paddy soil-rice system, described the influence of critical factors such as pH, iron oxides, organic matter, microbial species, and pathways affecting As transformation and accumulation by rice. Moreover, we elucidated As interaction with organic and inorganic amendments and mineral nutrients. The review also elaborates on As (im)mobilization processes and As uptake by rice under the influence of different mineral nutrients and amendments in paddy soil conditions, as well as their role in mitigating As transfer to rice grain. This review article provides critical information on As contamination in paddy soil-rice system, which is important to develop suitable strategies and mitigation programs for limiting As exposure via rice crop, and meet the UN's key Sustainable Development Goals (SDGs: 2 (zero hunger), 3 (good health and well-being), 12 (responsible consumption and production), and 13 (climate action)).

Synthesis, characterization and application of novel MnO and CuO impregnated biochar composites to sequester arsenic (As) from water: Modeling, thermodynamics and reusability.

The present study aimed at enhancing the adsorption potential of novel nanocomposites of Sesbania bispinosa biochar (SBC) with copper oxide (SBC/CuO) and manganese oxide nanoparticles (SBC/MnO) for the efficient and inexpensive removal of environmentally concerned contaminant arsenic (As) from contaminated water at batch scale. The scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, energy dispersive X-ray (EDX), X-ray diffraction (XRD) and point of zero charge (PZC) analyses proved successful impregnation of the metallic nanoparticles on SBC surface. The results revealed the maximum As removal (96 %) and adsorption (12.47 mg/g) by SBC/CuO composite at 10 mg As/L, optimum pH-4, dose 1.0 g/L and ambient temperature (25 ± 1.5 °C) as compared with SBC (7.33 mg/g) and SBC/MnO (7.34 mg/g). Among four types of adsorption isotherms, Freundlich isotherm demonstrated best fit with R2 > 0.997. While pseudo second-order kinetic model revealed better agreement with kinetic experimental data as matched with other kinetic models. The thermodynamic results depicted that As adsorption on the as-synthesized adsorbents was endothermic and spontaneous in nature with increased randomness. The SBC/CuO displayed excellent reusability and stability over four adsorption/desorption cycles and proved that the as-synthesized SBC/CuO composite may be the efficient adsorbent for practical removal of As from contaminated water.

Arsenic speciation and biotransformation pathways in the aquatic ecosystem: The significance of algae.

The contamination of aquatic systems with arsenic (As) is considered to be an internationally-important health and environmental issue, affecting over 115 countries globally. Arsenic contamination of aquatic ecosystems is a global threat as it can enter the food chain from As-rich water and cause harmful impacts on the humans and other living organisms. Although different factors (e.g., pH, redox potential, iron/manganese oxides, and microbes) control As biogeochemical cycling and speciation in water systems, the significance of algal species in biotransformation of As is poorly understood. The overarching attribute of this review is to briefly elaborate various As sources and its distribution in water bodies and factors affecting As biogeochemical behavior in aqueous ecosystems. This review elucidates the intriguing role of algae in biotransformation/volatilization of As in water bodies under environmentally-relevant conditions. Also, we critically delineate As sorption, uptake, oxidation and reduction pathways of As by algae and their possible role in bioremediation of As-contaminated water (e.g., drinking water, wastewater). The current review provides the updated and useful framework for government and water treatment agencies to implement algae in As remediation programs globally.

Withdrawal Notice: Electro-Catalytic process for the Synthesis of Organic Compounds and their Biological Applications

The article for the journal Current Organic Synthesis has been removed by the Publisher due to acute language inconsistencies and grammatical errors. Bentham Science apologizes to the readers of the journal for any inconvenience this may cause. The Bentham Editorial Policy on Article Withdrawal can be found at https://benthamscience.com/editorial-policies-main.php Bentham Science Disclaimer: It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Furthermore, any data, illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. By submitting a manuscript, the authors agree that the copyright of their article is transferred to the publishers if and when the article is accepted for publication.

Effect of biochar modified with magnetite nanoparticles and HNO3 for efficient removal of Cr(VI) from contaminated water: A batch and column scale study.

Chromium (Cr) poses serious consequences on human and animal health due to its potential carcinogenicity. The present study aims at preparing a novel biochar derived from Chenopodium quinoa crop residues (QBC), its activation with magnetite nanoparticles (QBC/MNPs) and strong acid HNO3 (QBC/Acid) to evaluate their batch and column scale potential to remove Cr (VI) from polluted water. The QBC, QBC/MNPs and QBC/Acid were characterized with SEM, FTIR, EDX, XRD as well as point of zero charge (PZC) to get an insight into their adsorption mechanism. The impact of different process parameters including dose of the adsorbent (1-4 g/L), contact time (0-180 min), initial concentration of Cr (25-200 mg/L) as well as solution pH (2-8) was evaluated on the Cr (VI) removal from contaminated water. The results revealed that QBC/MNPs proved more effective (73.35-93.62-%) for the Cr (VI) removal with 77.35 mg/g adsorption capacity as compared with QBC/Acid (55.85-79.8%) and QBC (48.85-75.28-%) when Cr concentration was changed from 200 to 25 mg/L. The isothermal experimental results follow the Freundlich adsorption model rather than Langmuir, Temkin and Dubinin-Radushkevich adsorption isotherm models. While kinetic adsorption results were well demonstrated by pseudo second order kinetic model. Column scale experiments conducted at steady state exhibited excellent retention of Cr (VI) by QBC, QBC/MNPs and QBC/Acid at 50 and 100 mg Cr/L. The results showed that this novel biochar (QBC) and its modified forms (QBC/Acid and QBC/MNPs) are applicable with excellent reusability and stability under acidic conditions for the practical treatment of Cr (VI) contaminated water.

Potential of siltstone and its composites with biochar and magnetite nanoparticles for the removal of cadmium from contaminated aqueous solutions: Batch and column scale studies.

The present study is the first attempt to evaluate the pilot and batch scale adsorption potential of siltstone (SS) and its nanocomposites with biochar (EDB/SS), magnetite nanoparticles (MNPs/SS) and MNPs/EDB/SS for Cd removal from contaminated water. The SS, EDB/SS, MNPs/SS and MNPs/EDB/SS were characterized with FTIR, XRD, BET, SEM, TEM, TGA and point of zero charge (PZC). The effects of adsorbent dosage, contact time, initial Cd concentration, pH and presence of competing ions were evaluated on the Cd removal and its adsorption. The order for Cd removal was: MNPs/EDB/SS > MNPs/SS > EDB/SS > SS (95.86-99.72% > 93.10-98.5% > 89.66.98-98.40% > 74.90-90%). Column scale experiments yielded maximum retention (95%) of Cd even after 2 h of injection at 100 mg Cd/L. The exhausted SS, EDB/SS, MNPs/SS and MNPs/EDB/SS were reused without losing significant adsorption potential. Similarly, maximum Cd adsorption (117.38 mg/g) was obtained with MNPs/EDB/SS at dose 1.0 g/L. The results revealed that coexisting cations reduced the Cd removal due to competition with Cd ions. The experimental results were better explained with Freundlich isotherm model and pseudo 2nd order kinetic models. The results revealed that SS and its composites can be used efficiently for the removal of Cd from contaminated water.

Compositional and health risk assessment of drinking water from health facilities of District Vehari, Pakistan.

Arsenic (As) is a potentially toxic and carcinogenic metalloid. It has gained considerable attention owing to its high ecotoxic nature. High As contamination of groundwater in scattered areas is the current status of Pakistan. A number of assessments exist for the As contamination of the drinking water in District Vehari, Pakistan. However, there is scarcity of data about As contents in drinking water of health facilities and healthcare centers in District Vehari. The current study, therefore, was carried out to assess As concentration and associated health risk in the drinking water of three health facilities (district head quarter, rural health center and basic health unit) of District Vehari. In total, 75 drinking water samples were collected and examined for As contents in addition to physicochemical characteristics such as electrical conductivity, pH, total soluble salts, chloride, carbonates, bicarbonates, fluoride, nitrate, nitrite, calcium, magnesium and iron. Results indicated that the groundwater samples are not fully fit for drinking purposes with respect to several parameters, especially the alarming levels of As. It was found that 52% of drinking water samples of Vehari have As concentration greater than WHO permissible limit (10 µg/L) and 17% have As concentration greater than Pak-EPA permissible limit (50 µg/L). The risk assessment parameters (average daily dose, hazard quotient and carcinogenic risk) showed possible carcinogenic and non-carcinogenic risks associated with ingestion of As-contaminated drinking water in the healthcare facilities. Based on the results of the present study, it is anticipated that hospitals and health centers in Vehari are in need of safe drinking water. The implementation of national/international standards for drinking water in healthcare facilities is a necessary measure to improve the services and increase local access to safe drinking water. The same may be applied to other public offices and organizations such as educational institutes and district government offices.

A new biochar from cotton stalks for As (V) removal from aqueous solutions: its improvement with H3PO4 and KOH.

The present study is the first attempt to evaluate the potential of acid and base activated biochar derived from cotton stalks (CSB) for the removal of As from contaminated water. The CSB was treated with 0.5 M KOH (BCSB) and H3PO4 (ACSB) separately to change its surface properties. The CSB, ACSB and BSCB were characterized using BET, FTIR, and SEM analysis to check the effectiveness and insight of the main mechanisms involved in the removal of As. A series of batch experiments was performed using As-contaminated synthetic water and groundwater samples. The effects of initial concentration of As, contact time, dose of the biochars, solution pH, type of the biochar and coexisting ions on the removal of As were investigated. Results revealed that BCSB efficiently removed As (90-99.5%) from contaminated water as compared with ACSB (84-98%) and CSB (81-98%) due to improved surface properties when As concentration was varied from 0.1 to 4.0 mg/L. The experimental data were best fitted with Freundlich adsorption isotherm as compared with Langmuir, Temkin and Dubinin-Radushkevich models. However, kinetic data were well explained with pseudo-second-order kinetic model rather than pseudo-first-order, intra-particle diffusion and Elovich models. The sorption energy indicated that physical adsorption was involved in the removal of As. The comparison of adsorption results with other biochars and their modified forms suggests that activation of CSB with base can be used effectively (4.48 mg/g) as a low-cost adsorbent for maximum removal of As from contaminated aqueous systems.

Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater.

The present study aims at evaluating the batch scale potential of cotton shell powder (CSP), Moringa oleifera leaves (ML), and magnetite-assisted composites of Moringa oleifera leaves (MLMC) and cotton shell powder (CSPMC) for the removal of brilliant green dye (BG) from synthetic wastewater. This is the first attempt to combine biosorbents with nanoparticles (NPs) for the removal of BG. The surface properties of ML, CSP, and their composites were characterized with Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX). The impact of dosage of the adsorbents (1-4 g/L), initial concentrations of BG (20-320 mg/L), pH (6-12), and contact time (15-180 min) on BG removal was evaluated. The BG removal was in order of CSPMC > MLMC > CSP > ML (98.8-86.6% > 98.2-82.0% > 92.3-70.7% > 89.0-57.4%) at optimum dosage (2 g/L) and pH (8). Moreover, maximum adsorption (252.17 mg/g) was obtained with CSPMC. The experimental results showed better fit with Freundlich adsorption isotherm model and kinetic data revealed that sorption followed pseudo-second-order kinetic model. The values of Gibbs free energy and mean free energy of sorption showed that physical adsorption was involved in the removal of BG. FTIR results confirmed that -O-H, -C-OH, =C-H, -C-H, =-CH3, HC ≡ CH, C=C, -C=O, -C-N, and -C-O-C- groups were involved in the removal of BG. The results revealed that application of low-cost biosorbents combined with NPs is very effective and promising for the removal of textile dyes from wastewater.

Greener synthesis of zinc oxide nanoparticles using Trianthema portulacastrum extract and evaluation of its photocatalytic and biological applications.

Synthesis of nanoparticles (NPs) through "green" chemistry is an exciting area of research with wide applications. Trianthema portulacastrum's extract containing greater amount of reducing agents has been explored first time for the synthesis of ZnO-NPs that characterized with UV/Vis, XRD, FT-IR, SEM,EDX, HR-TEM and XPS. The particles of ZnO-NPs are crystalline and having the size in the range of 25-90 nm. The cell viability of ZnO-NPs was studied using Mouse pre-osteoblast cell line MC3T3-E1 sub-clone 14 cells which confirmed its biocompatibility that render for biomedical applications. The antibacterial properties were evaluated against Staphylococcus aureus and Escherichia coli which showed high potency of synthesized ZnO-NPs against these species. The antifungal activities of ZnO-NPs were screened against Aspergillus niger, Aspergillus flavus, Aspergillus fumigatus of fungal species. The antioxidant activity of the as-synthesized NPs was also studied using DPPH (2, 2-diphenyl-1-picrylhydrazyl) substrate. The ZnO-NPs were evaluated for catalytic activity through degradation of Synozol Navy Blue-KBF textile dye using solar irradiation that causes 91% degradation of the dye in 159 min. Mechanistic pathways for the degradation of Synozol Navy Blue-KBF dye using ZnO-NPs were also proposed from the pattern of the degradation of the dye and the resulting by-products. The results concluded that the ZnO-NPs synthesized by green method have high biological and photocatalytic applications.