(111) Facet-oriented Cu2Mg Intermetallic Compound with Cu3-Mg Sites for CO2 Electroreduction to Ethanol with Industrial Current Density.

The efficient ethanol electrosynthesis from CO2 is challenging with low selectivity at high CO2 electrolysis rates, due to the competition with H2 and other reduction products. Copper-based bimetallic electrocatalysts are potential candidates for the CO2-to-ethanol conversion, but the secondary metal has mainly been focused on active components (such as Ag, Sn) for CO2 electroreduction, which also promote selectivity of ethylene or other reduction products rather than ethanol. Limited attention has been given to alkali-earth metals due to their inherently active chemical property. Herein, we rationally synthesized a (111) facet-oriented nano Cu2Mg (designated as Cu2Mg(111)) intermetallic compound with high-density ordered Cu3-Mg sites. The in situ Raman spectroscopy and density function theory calculations revealed that the Cu3 - δ $_{^{\rm{{\rm \delta} }} }$ --Mg- δ $_{^{\rm{{\rm \delta} }} }$ + active sites allowed to increase *CO surface coverage, decrease reaction energy for *CO-CO coupling, and stabilize *CHCHOH intermediates, thus promoting the ethanol formation pathway. The Cu2Mg(111) catalyst exhibited a high FEC2H5OH of 76.2±4.8 % at 600 mA⋅cm-2, and a peak value of |jC2H5OH| of 720±34 mA⋅cm-2, almost 4 times of that using conventional Cu2Mg with (311) facets, comparable to the best reported values for the CO2-to-ethanol electroreduction.

Cubic Iodide Lix YI3+x Superionic Conductors through Defect Manipulation for All-Solid-State Li Batteries.

Halide solid electrolytes (SEs) have attracted significant attention due to their competitive ionic conductivity and good electrochemical stability. Among typical halide SEs (chlorides, bromides, and iodides), substantial efforts have been dedicated to chlorides or bromides, with iodide SEs receiving less attention. Nevertheless, compared with chlorides or bromides, iodides have both a softer Li sublattice and lower reduction limit, which enable iodides to possess potentially high ionic conductivity and intrinsic anti-reduction stability, respectively. Herein, we report a new series of iodide SEs: Lix YI3+x (x=2, 3, 4, or 9). Through synchrotron X-ray/neutron diffraction characterizations and theoretical calculations, we revealed that the Lix YI3+x SEs belong to the high-symmetry cubic structure, and can accommodate abundant vacancies. By manipulating the defects in the iodide structure, balanced Li-ion concentration and generated vacancies enables an optimized ionic conductivity of 1.04 × 10-3  S cm-1 at 25 °C for Li4 YI7 . Additionally, the promising Li-metal compatibility of Li4 YI7 is demonstrated via electrochemical characterizations (particularly all-solid-state Li-S batteries) combined with interface molecular dynamics simulations. Our study on iodide SEs provides deep insights into the relation between high-symmetry halide structures and ionic conduction, which can inspire future efforts to revitalize halide SEs.

Amorphous Oxyhalide Matters for Achieving Lithium Superionic Conduction.

The recently surged halide-based solid electrolytes (SEs) are great candidates for high-performance all-solid-state batteries (ASSBs), due to their decent ionic conductivity, wide electrochemical stability window, and good compatibility with high-voltage oxide cathodes. In contrast to the crystalline phases in halide SEs, amorphous components are rarely understood but play an important role in Li-ion conduction. Here, we reveal that the presence of amorphous component is common in halide-based SEs that are prepared via mechanochemical method. The fast Li-ion migration is found to be associated with the local chemistry of the amorphous proportion. Taking Zr-based halide SEs as an example, the amorphization process can be regulated by incorporating O, resulting in the formation of corner-sharing Zr-O/Cl polyhedrons. This structural configuration has been confirmed through X-ray absorption spectroscopy, pair distribution function analyses, and Reverse Monte Carlo modeling. The unique structure significantly reduces the energy barriers for Li-ion transport. As a result, an enhanced ionic conductivity of (1.35 ± 0.07) × 10-3 S cm-1 at 25 °C can be achieved for amorphous Li3ZrCl4O1.5. In addition to the improved ionic conductivity, amorphization of Zr-based halide SEs via incorporation of O leads to good mechanical deformability and promising electrochemical performance. These findings provide deep insights into the rational design of desirable halide SEs for high-performance ASSBs.

Precise Tailoring of Lithium-Ion Transport for Ultralong-Cycling Dendrite-Free All-Solid-State Lithium Metal Batteries.

All-solid-state lithium metal batteries can address crucial challenges regarding insufficient battery cycling life and energy density. The demonstration of long-cycling dendrite-free all-solid-state lithium metal batteries requires precise tailoring of lithium-ion transport of solid-state electrolytes (SSEs). In this work, a proof of concept is reported for precise tailoring of lithium-ion transport of a halide SSE, Li3InCl6, including intragranular (within grains) but also intergranular (between grains) lithium-ion transport. Lithium-ion migration tailoring mechanism in crystals is developed by unexpected enhanced Li, In, and Cl vacancy populations and lower energy barrier for hopping. The lithium-ion transport tailoring mechanism between the grains is determined by the elimination of voids between grains and the formation of unexpected supersonic conducting grain boundaries, boosting the lithium dendrite suppression ability of SSE. Due to boosted lithium-ion conduction and dendrite-suppression ability, the all-solid-state lithium metal batteries coupled with Ni-rich LiNi0.83Co0.12Mn0.05O2 cathodes and lithium metal anodes demonstrate breakthroughs in electrochemical performance by achieving extremely long cycling life at a high current density of 0.5 C (2000 cycles, 93.7% capacity retention). This concept of precise tailoring of lithium-ion transport provides a cost, time, and energy efficient solution to conquer the remaining challenges in all-solid-state lithium-metal batteries for fast developing electric vehicle markets.

Halide Heterogeneous Structure Boosting Ionic Diffusion and High-Voltage Stability of Sodium Superionic Conductors.

The development of solid-state sodium-ion batteries (SSSBs) heavily hinges on the development of an superionic Na+ conductor (SSC) that features high conductivity, (electro)chemical stability, and deformability. The construction of heterogeneous structures offers a promising approach to comprehensively enhancing these properties in a way that differs from traditional structural optimization. Here, this work exploits the structural variance between high- and low-coordination halide frameworks to develop a new class of halide heterogeneous structure electrolytes (HSEs). The halide HSEs incorporating a UCl3 -type high-coordination framework and amorphous low-coordination phase achieves the highest Na+ conductivity (2.7 mS cm-1 at room temperature, RT) among halide SSCs so far. By discerning the individual contribution of the crystalline bulk, amorphous region, and interface, this work unravels the synergistic ion conduction within halide HSEs and provides a comprehensive explanation of the amorphization effect. More importantly, the excellent deformability, high-voltage stability, and expandability of HSEs enable effective SSSB integration. Using a cold-pressed cathode electrode composite of uncoated Na0.85 Mn0.5 Ni0.4 Fe0.1 O2 and HSEs, the SSSBs present stable cycle performance with a capacity retention of 91.0% after 100 cycles at 0.2 C.

Design principles for sodium superionic conductors.

Motivated by the high-performance solid-state lithium batteries enabled by lithium superionic conductors, sodium superionic conductor materials have great potential to empower sodium batteries with high energy, low cost, and sustainability. A critical challenge lies in designing and discovering sodium superionic conductors with high ionic conductivities to enable the development of solid-state sodium batteries. Here, by studying the structures and diffusion mechanisms of Li-ion versus Na-ion conducting solids, we reveal the structural feature of face-sharing high-coordination sites for fast sodium-ion conductors. By applying this feature as a design principle, we discover a number of Na-ion conductors in oxides, sulfides, and halides. Notably, we discover a chloride-based family of Na-ion conductors NaxMyCl6 (M = La-Sm) with UCl3-type structure and experimentally validate with the highest reported ionic conductivity. Our findings not only pave the way for the future development of sodium-ion conductors for sodium batteries, but also consolidate design principles of fast ion-conducting materials for a variety of energy applications.

Lithium-compatible and air-stable vacancy-rich Li9N2Cl3 for high-areal capacity, long-cycling all-solid-state lithium metal batteries.

Attaining substantial areal capacity (>3 mAh/cm2) and extended cycle longevity in all-solid-state lithium metal batteries necessitates the implementation of solid-state electrolytes (SSEs) capable of withstanding elevated critical current densities and capacities. In this study, we report a high-performing vacancy-rich Li9N2Cl3 SSE demonstrating excellent lithium compatibility and atmospheric stability and enabling high-areal capacity, long-lasting all-solid-state lithium metal batteries. The Li9N2Cl3 facilitates efficient lithium-ion transport due to its disordered lattice structure and presence of vacancies. Notably, it resists dendrite formation at 10 mA/cm2 and 10 mAh/cm2 due to its intrinsic lithium metal stability. Furthermore, it exhibits robust dry-air stability. Incorporating this SSE in Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode-based all-solid-state batteries, we achieve substantial cycling stability (90.35% capacity retention over 1500 cycles at 0.5 C) and high areal capacity (4.8 mAh/cm2 in pouch cells). These findings pave the way for lithium metal batteries to meet electric vehicle performance demands.

Entropy Confinement Promotes Hydrogenolysis Activity for Polyethylene Upcycling.

Chemical upcycling that catalyzes waste plastics back to high-purity chemicals holds great promise in end-of-life plastics valorization. One of the main challenges in this process is the thermodynamic limitations imposed by the high intrinsic entropy of polymer chains, which makes their adsorption on catalysts unfavorable and the transition state unstable. Here, we overcome this challenge by inducing the catalytic reaction inside mesoporous channels, which possess a strong confined ability to polymer chains, allowing for stabilization of the transition state. This approach involves the synthesis of p-Ru/SBA catalysts, in which Ru nanoparticles are uniformly distributed within the channels of an SBA-15 support, using a precise impregnation method. The unique design of the p-Ru/SBA catalyst has demonstrated significant improvements in catalytic performance for the conversion of polyethylene into high-value liquid fuels, particularly diesel. The catalyst achieved a high solid conversion rate of 1106 g ⋅ gRu -1 ⋅ h-1 at 230 °C. Comparatively, this catalytic activity is 4.9 times higher than that of a control catalyst, Ru/SiO2 , and 14.0 times higher than that of a commercial catalyst, Ru/C, at 240 °C. This remarkable catalytic activity opens up immense opportunities for the chemical upcycling of waste plastics.

Atomically Dispersed Mg-N-C Material Supported Highly Crystalline Pt3Mg Nanoalloys for Efficient Oxygen Reduction Reaction.

Single-atom or atomically dispersed metal materials have emerged as highly efficient catalysts, but their potential as excellent supports has rarely been reported. In this work, we prepared Mg-N-C materials derived from annealing of a Mg-based metal-organic framework (MOF). By introducing Pt, Mg-N-C not only serves as a platform for anchoring Pt nanoparticles but also facilitates the integration of Mg into the Pt face-centered cubic lattice, resulting in the formation of highly crystalline Pt3Mg nanoalloys via the metal-support interfacial interaction. Synchrotron radiation-based X-ray absorption spectroscopy (XAS) enables us to study the interfacial interaction and the surface electronic structure of this intricate system. The formation of Pt3Mg nanoalloys induces a downshift of the Pt d-band (gaining d-charge), as revealed by the decrease in the Pt L3-edge white-line (WL) area under the curve. This downshift can weaken the binding of oxygen reduction reaction (ORR) intermediates, hence improving the ORR performance.

A family of oxychloride amorphous solid electrolytes for long-cycling all-solid-state lithium batteries.

Solid electrolyte is vital to ensure all-solid-state batteries with improved safety, long cyclability, and feasibility at different temperatures. Herein, we report a new family of amorphous solid electrolytes, xLi2O-MCly (M = Ta or Hf, 0.8 ≤ x ≤ 2, y = 5 or 4). xLi2O-MCly amorphous solid electrolytes can achieve desirable ionic conductivities up to 6.6 × 10-3 S cm-1 at 25 °C, which is one of the highest values among all the reported amorphous solid electrolytes and comparable to those of the popular crystalline ones. The mixed-anion structural models of xLi2O-MCly amorphous SEs are well established and correlated to the ionic conductivities. It is found that the oxygen-jointed anion networks with abundant terminal chlorines in xLi2O-MCly amorphous solid electrolytes play an important role for the fast Li-ion conduction. More importantly, all-solid-state batteries using the amorphous solid electrolytes show excellent electrochemical performance at both 25 °C and -10 °C. Long cycle life (more than 2400 times of charging and discharging) can be achieved for all-solid-state batteries using the xLi2O-TaCl5 amorphous solid electrolyte at 400 mA g-1, demonstrating vast application prospects of the oxychloride amorphous solid electrolytes.

Constrained C2 adsorbate orientation enables CO-to-acetate electroreduction.

The carbon dioxide and carbon monoxide electroreduction reactions, when powered using low-carbon electricity, offer pathways to the decarbonization of chemical manufacture1,2. Copper (Cu) is relied on today for carbon-carbon coupling, in which it produces mixtures of more than ten C2+ chemicals3-6: a long-standing challenge lies in achieving selectivity to a single principal C2+ product7-9. Acetate is one such C2 compound on the path to the large but fossil-derived acetic acid market. Here we pursued dispersing a low concentration of Cu atoms in a host metal to favour the stabilization of ketenes10-chemical intermediates that are bound in monodentate fashion to the electrocatalyst. We synthesize Cu-in-Ag dilute (about 1 atomic per cent of Cu) alloy materials that we find to be highly selective for acetate electrosynthesis from CO at high *CO coverage, implemented at 10 atm pressure. Operando X-ray absorption spectroscopy indicates in situ-generated Cu clusters consisting of <4 atoms as active sites. We report a 12:1 ratio, an order of magnitude increase compared to the best previous reports, in the selectivity for acetate relative to all other products observed from the carbon monoxide electroreduction reaction. Combining catalyst design and reactor engineering, we achieve a CO-to-acetate Faradaic efficiency of 91% and report a Faradaic efficiency of 85% with an 820-h operating time. High selectivity benefits energy efficiency and downstream separation across all carbon-based electrochemical transformations, highlighting the importance of maximizing the Faradaic efficiency towards a single C2+ product11.

Site-Selective Polyolefin Hydrogenolysis on Atomic Ru for Methanation Suppression and Liquid Fuel Production.

Catalytic hydrogenolysis of end-of-life polyolefins can produce value-added liquid fuels and therefore holds great promises in plastic waste reuse and environmental remediation. The major challenge limiting the recycling economic benefit is the severe methanation (usually >20%) induced by terminal C-C cleavage and fragmentation in polyolefin chains. Here, we overcome this challenge by demonstrating that Ru single-atom catalyst can effectively suppress methanation by inhibiting terminal C-C cleavage and preventing chain fragmentation that typically occurs on multi-Ru sites. The Ru single-atom catalyst supported on CeO2 shows an ultralow CH4 yield of 2.2% and a liquid fuel yield of over 94.5% with a production rate of 314.93 gfuels gRu -1 h-1 at 250 °C for 6 h. Such remarkable catalytic activity and selectivity of Ru single-atom catalyst in polyolefin hydrogenolysis offer immense opportunities for plastic upcycling.

Over 2 A cm-2 CO2 -to-Ethanol Conversion by Alkali-Metal Cation Induced Copper With Dominant (200) Facets.

The high-rate ethanol electrosynthesis from CO2 is challenging due to the low selectivity and poor activity, which requires the competition with other reduction products and H2 . Here, the electrochemical reconstruction of Cs3 Cu2 Cl5 perovskite to form surface Cl-bonded, low-coordinated Cs modified Cu(200) nanocubes (CuClCs), is demonstrated. Density functional theory calculations reveal that the CuClCs structure possesses low Bader charges and a large coordination capacity; and thus, can promote the CO2 -to-ethanol pathway via stabilizing C-O bond in oxygenate intermediates. The CuClCs catalyst exhibits outstanding partial current densities for producing ethanol (up to 2124 ± 54 mA cm-2 ) as one of the highest reported values in the electrochemical CO2 or CO reduction. This work suggests an attractive strategy with surface alkali-metal cations for ampere-level CO2 -to-ethanol electrosynthesis.

The Role of Bismuth in Suppressing the CO Poisoning in Alkaline Methanol Electrooxidation: Switching the Reaction from the CO to Formate Pathway.

While tuning the electronic structure of Pt can thermodynamically alleviate CO poisoning in direct methanol fuel cells, the impact of interactions between intermediates on the reaction pathway is seldom studied. Herein, we contrive a PtBi model catalyst and realize a complete inhibition of the CO pathway and concurrent enhancement of the formate pathway in the alkaline methanol electrooxidation. The key role of Bi is enriching OH adsorbates (OHad) on the catalyst surface. The competitive adsorption of CO adsorbates (COad) and OHad at Pt sites, complementing the thermodynamic contribution from alloying Bi with Pt, switches the intermediate from COad to formate that circumvents CO poisoning. Hence, 8% Bi brings an approximately 6-fold increase in activity compared to pure Pt nanoparticles. This notion can be generalized to modify commercially available Pt/C catalysts by a microwave-assisted method, offering opportunities for the design and practical production of CO-tolerance electrocatalysts in an industrial setting.

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries.

High-energy Ni-rich layered oxide cathode materials such as LiNi0.8Mn0.1Co0.1O2 (NMC811) suffer from detrimental side reactions and interfacial structural instability when coupled with sulfide solid-state electrolytes in all-solid-state lithium-based batteries. To circumvent this issue, here we propose a gradient coating of the NMC811 particles with lithium oxy-thiophosphate (Li3P1+xO4S4x). Via atomic layer deposition of Li3PO4 and subsequent in situ formation of a gradient Li3P1+xO4S4x coating, a precise and conformal covering for NMC811 particles is obtained. The tailored surface structure and chemistry of NMC811 hinder the structural degradation associated with the layered-to-spinel transformation in the grain boundaries and effectively stabilize the cathode|solid electrolyte interface during cycling. Indeed, when tested in combination with an indium metal negative electrode and a Li10GeP2S12 solid electrolyte, the gradient oxy-thiophosphate-coated NCM811-based positive electrode enables the delivery of a specific discharge capacity of 128 mAh/g after almost 250 cycles at 0.178 mA/cm2 and 25 °C.

Superionic Conducting Halide Frameworks Enabled by Interface-Bonded Halides.

The revival of ternary halides Li-M-X (M = Y, In, Zr, etc.; X = F, Cl, Br) as solid-state electrolytes (SSEs) shows promise in realizing practical solid-state batteries due to their direct compatibility toward high-voltage cathodes and favorable room-temperature ionic conductivities. Most of the reported superionic halide SSEs have a structural pattern of [MCl6]x- octahedra and generate a tetrahedron-assisted Li+ ion diffusion pathway. Here, we report a new class of zeolite-like halide frameworks, SmCl3, for example, in which 1-dimensional channels are enclosed by [SmCl9]6- tricapped trigonal prisms to provide a short jumping distance of 2.08 Å between two octahedra for Li+ ion hopping. The fast Li+ diffusion along the channels is verified through ab initio molecular dynamics simulations. Similar to zeolites, the SmCl3 framework can be grafted with halide species to obtain mobile ions without altering the base structure, achieving an ionic conductivity over 10-4 S cm-1 at 30 °C with LiCl as the adsorbent. Moreover, the universality of the interface-bonding behavior and ionic diffusion in a class of framework materials is demonstrated. It is suggested that the ionic conductivity of the MCl3/halide composite (M = La-Gd) is likely in correlation with the ionic conductivity of the grafted halide species, interfacial bonding, and framework composition/dimensions. This work reveals a potential class of halide structures for superionic conductors and opens up a new frontier for constructing zeolite-like frameworks in halide-based materials, which will promote the innovation of superionic conductor design and contribute to a broader selection of halide SSEs.

Mo2TiC2 MXene-Supported Ru Clusters for Efficient Photothermal Reverse Water-Gas Shift.

Driving metal-cluster-catalyzed high-temperature chemical reactions by sunlight holds promise for the development of negative-carbon-footprint industrial catalysis, which has yet often been hindered by the poor ability of metal clusters to harvest and utilize the full spectrum of solar energy. Here, we report the preparation of Mo2TiC2 MXene-supported Ru clusters (Ru/Mo2TiC2) with pronounced broadband sunlight absorption ability and high sintering resistance. Under illumination of focused sunlight, Ru/Mo2TiC2 can catalyze the reverse water-gas shift (RWGS) reaction to produce carbon monoxide from the greenhouse gas carbon dioxide and renewable hydrogen with enhanced activity, selectivity, and stability compared to their nanoparticle counterparts. Notably, the CO production rate of MXene-supported Ru clusters reached 4.0 mol·gRu-1·h-1, which is among the best reported so far for photothermal RWGS catalysts. Detailed studies suggest that the production of methane is kinetically inhibited by the rapid desorption of CO from the surface of the Ru clusters.

Unveiling the Local Structure and Electronic Properties of PdBi Surface Alloy for Selective Hydrogenation of Propyne.

Building a reliable relationship between the electronic structure of alloyed metallic catalysts and catalytic performance is important but remains challenging due to the interference from many entangled factors. Herein, a PdBi surface alloy structural model, by tuning the deposition rate of Bi atoms relative to the atomic interdiffusion rate at the interface, realizes a continuous modulation of the electronic structure of Pd. Using advanced X-ray characterization techniques, we provide a precise depiction of the electronic structure of the PdBi surface alloy. As a result, the PdBi catalysts show enhanced propene selectivity compared with the pure Pd catalyst in the selective hydrogenation of propyne. The prevented formation of saturated ß-hydrides in the subsurface layers and weakened propene adsorption on the surface contribute to the high selectivity. Our work provides in-depth understanding of the electronic properties of surface alloy structure and underlies the study of the electronic structure-performance relationship in bimetallic catalysts.

Surface Co-Modification of Halide Anions and Potassium Cations Promotes High-Rate CO2 -to-Ethanol Electrosynthesis.

The high-rate electrochemical CO2 conversion to ethanol with high partial current density is attractive but challenging, which requires competing with other reduction products as well as hydrogen evolution. This work demonstrates the in situ reconstruction of KCuF3 perovskite under CO2 electroreduction conditions to fabricate a surface fluorine-bonded, single-potassium-atom-modified Cu(111) nanocrystal (K-F-Cu-CO2 ). Density functional theory calculations reveal that the co-modification of both F and K atoms on the Cu(111) surface can promote the ethanol pathway via stabilization of the CO bond and selective hydrogenation of the CC bond in the CH2 CHO* intermediate, while the single modification of either F or K is less effective. The K-F-Cu-CO2 electrocatalyst exhibits an outstanding CO2 -to-ethanol partial current density of 423 ± 30 mA cm-2 with the corresponding Faradaic efficiency of 52.9 ± 3.7%, and a high electrochemical stability at large current densities, thus suggesting an attractive means of surface co-modification of halide anions and alkali-metal cations on Cu catalysts for high-rate CO2 -to-ethanol electrosynthesis.

Favorable Bonding and Band Structures of Cu2ZnSnS4 and CdS Films and Their Photovoltaic Interfaces.

Thin-film photovoltaic cells using Cu2ZnSnS4 (CZTS, p-type) have many advantages, such as high photoconversion, low cost, and great tunability with earth-abundant, nontoxic elements, all of which are necessary to be long-term contributors to next-generation solar energy harvesting. Accurate measurements of bonding and band structures of both the thin-film materials and their interfaces are paramount to designing the solar devices layer-by-layer. Here, finely tuned 1 µm thick CZTS films, 50 nm thick CdS layers (n-type), and their 1 µm/2 nm p-n junction were fabricated inexpensively using our previously studied methods and investigated extensively for maximizing the key interface in the CZTS solar devices. Synthesized bulk CZTS and CdS were analyzed for structural deviations and crystal defects using synchrotron-based (SR) X-ray absorption fine structure (XAFS) along with simulated XAFS patterns. The structural properties of the two materials were designed to favor photovoltaic activity. Interface valence band structures of the CZTS/CdS p-n junction were measured through SR X-ray photoelectron spectroscopy (SR-XPS) and compared with the ones simulated using density functional theory. A full band diagram was constructed from XPS of the bulk films and SR-XPS of the interface, providing guidelines in optimizing charge-carrier extraction from the CZTS absorber to CdS buffer layer. It turns out that a small spike-like interface in the conduction band overlap was formed, maintaining a strong internal bias, while favoring a small energy barrier to prevent large-scale recombination from occurring. A large open-circuit voltage was obtained in the preliminary solar cell devices built on the small spike-like interface.